Used Membrane Press for sale (27,873)

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 7360 Measurements depth 6750 Measurements height 2310 Machine weight 12960 Control Unit Brand SIEMENS Model Sinnumeric 840 Hfsdpfx Aexn Dldofijn Movement X-Axis Movement 2500 + R mm X-Axis Rapid Traverse 100 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 75 m/min Max Material Thickness Steel 6 mm Stainless steel 3 mm This Durma TPL93 turret punch press was manufactured in 2019. It's a robust choice for precision punching operations. Consider the opportunity to buy this Durma TPL93 turret punch press. Contact us for more information. Application Types Punching

Condition: used, Single-column hydraulic press SCHULZ Type SES 250 . 04.86.3511/3 Year of manufacture: 1986 Pressing force: 25 tons Hjdpfx Afehl Npqjisfn Return force: 10 tons Throat depth: 360 mm Table size: 600 x 720 mm Ram area: 500 x 500 mm Clear hole in table: Ø 100 mm Clamping pin bore: Ø 40 mm Ram stroke: 400 mm Maximum installation height: 600 mm Table height above floor: 935 / 775 mm Hydraulic tank capacity: 380 liters Drive power: 7.5 kW Power connection: 380 Volt, 50 Hz - Adjustable fixed stop in the press cylinder 180 mm, with hand crank adjustment - SICK light barrier - Two-hand operation - Base made of 160 mm U-steel Space requirement (L x W x H): 1900 x 1300 x 3100 / 3260 mm Weight: 3.6 tons Good condition

Year of construction: 2018, condition: good (used), functionality: fully functional, in total 7 FMTM250-7HS-32P FUSEI mold presses, year of manufacture 2011-2018, and also some Fujiwa mold presses, vintage 2002-2005 available Hsdpfx Aoxniklefijfn

Condition: new, pressure 200 t stroke 300 mm table surface area 1900 x 440 mm column travel between the guideways 1900 mm working feed 5,0 mm/sec engine output 15,0 kW weight of the machine ca. 4.800 kg. range L-W-H 2.570 x 1.665 x 2.860 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., Hedpjxabw Isfx Afiefn but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: good (used), Type DO 3 Machine No. 3492 Hfjdpfx Aoxn Ad Ssfien Force 20 kN Stroke 39 mm

Condition: used, table width: 1,200 mm, table length: 1,300 mm, Colombo Mercurio 1 (300T-A) Press Capacity: 300T Table: 1300 x 1200mm Opening: 800mm Please note the items in this lot 29643-176 are simultaneously offered in the combination lot 29643-177 as a complete line. The separate parts of the complete line 29643-177 are offered as individual lots 29643-175 and -176 Bidders can bid on the complete cell and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the cell either as a single lot or as individual lots. Successful bidders will be notified within 2 working days. Hfedpfxexnzwqe Afijn

Condition: excellent (used), Catalogue number: 7740 TECHNICAL DATA Dimensions of heating plates: 3000x1350mm Number of loads: 1 Shelf heated electrically Clearance: 340mm Number of cylinders: 6 Cylinder diameter: 80mm Total power: 20.7kW Pump motor: 1.1kW Dimensions (L/W/H): 3570x1600x2200mm Weight approx.: 3500kg ADVANTAGES – German manufacturing – Shelves heated electrically – Unpainted – Excellent condition – Used press Net price: 48,900 PLN Net price: 11,500 EUR depending on exchange rate 4.25 EUR Hedpfx Afexbggqoisfn (Prices may change with higher fluctuations)

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Hfodpfx Afsgp T Euoijn Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition

Condition: excellent (used), Year of construction: 2024, Pressure 100 t Bending length 3100 mm Control: EC10 control Hfjdpexnykvofx Afijn Equipment: - EC10 control, splitscreen - controlled axes: y1, y2, x, r, z1, z2 - hydraulic tool clamping top and bottom - 2 support arms - Stroke 300 mm

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display Hfedpfoxabnaex Afion - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: excellent (used), Year of construction: 1988, Manufacturer: Agostino Colombo Model: G 1600 Year: 1989 Condition: Used Stock number: 0386 Press force: 1600 tons Hfedpfxexnx Hio Afijn Number of pressure points: 2 Ram stroke: 135 mm Ram adjustment: 20 mm Die height from die holder cbra: 635 mm Die holder table size: 1,060 x 900 mm Lateral passage in the frame: 400 mm.

Condition: used, machine/vehicle number: 1247, table width: 1,220 mm, table length: 1,070 mm, pressing force: 300 t, Rovetta Press Capacity 300T Hedpfxoxnzi Tj Afijfn Table 1,220x1,070mm Strokes per minute: 15 Travel: 508mm

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1200 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Motor: 7.5 kW - Max working pressure: 150 bar - Extraction nozzle: 90 mm - Filter bag opening diameter: 500 mm - Max bag height: 900 mm - Dimensions (L/W/H): 1950x1400x2700 mm - Weight: 1130 kg ADVANTAGES – Italian manufacturing – Possibility of direct connection to sawdust extraction – Used briquetting machine – DTR documentation – Very good condition Net price: 29,900 PLN Net price: 7,050 EUR (exchange rate: 4.25 EUR) Hedpjxa Ephofx Afiofn (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 1990, Press force: 50 t Hodpfxjxnyi Ss Afiofn Bending length: 2085 mm Distance between uprights: 1690 mm Stroke: 105 mm Throat depth: 400 mm Table height: 960 mm Total power requirement: 6.5 kW Machine weight approx.: 3,450 kg Space requirement approx.: 2500x1800x2200 mm

Condition: as good as new (ex-display), Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display Hfedjxabcwspfx Afisn - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: like new (used), Year of construction: 1997, Manufacturer: INVERNIZZI Model: GNT2 Year: 1997 Condition: New Stock number: 0387 Press force: 1,000 t Number of pressure points: 2 Ram stroke: 150 mm Ram adjustment: 20 mm with wedges Strokes per minute: 12–55 Die height from die holder (cbra): 800 mm Sheet passage in frame: 660 mm Hodpfxexnx Exo Afiofn

Condition: used, table width: 900 mm, table length: 1,600 mm, pressing force: 200 t, year of last overhaul: 2024, Balconi MTRS.L Press (revamped 2024) Capacity 200T Table 900x1,600mm Strokes per minute: 32 Hjdpfx Aoxnzhpjfiefn Travel: 180mm

Condition: used, Year of construction: 2011, -Special price Machine brakes defective- Pressure: 36 t Bending length: 1020 mm Distance between uprights: 932 mm Stroke: 120 mm Installation height: 295 mm Hfodpfx Asxnyhbsfisn Throat depth: 150 mm Machine weight approx.: 2,600 kg

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder Hfedsxaayhjpfx Afion - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: used, machine/vehicle number: 72004250751, table width: 900 mm, table length: 2,000 mm, OMET Press, 250T capacity Table 900x2,000mm Strokes per minute: 30-60 Hfedpoxnzd Rsfx Afion Travel: 18-200mm

Condition: used, Year of construction: 2000, Press force: 85 t Bending length: 2050 mm Distance between uprights: 1750 mm Control: DELEM Hfodjxnxwnspfx Afisn Stroke: 215 mm Throat depth: 410 mm Weight: 7,900 kg Machine dimensions: 2700x2100x2400 mm Accessories: - Two-hand operation - 2 support arms - Side safety doors - Lasersafe Fissler - Wila tool holder - Die shifting - Crowning - Tool cabinet

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports Hfedpfoxaar Dsx Afion - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, pressure 60.0 t Hfjdpfxexaakge Afien stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: as good as new (ex-display), Year of construction: 2021, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Hfedpsxaabfofx Afion Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts Hfsdpfow U U Svox Afijn * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual