Used Megapoint Drill Grinder for sale (6,182)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. Hnsdpfx Aox Uyzqeh Njg 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2009, condition: reconditioned (used), Complete plant for the production of wood wool/wood shavings out of logs with a lngth up to 3,0 m. Total capacity about 4 to/h. Complete control system including knife grinding machine, several planer heads, conveyor system for wool transport. Exhausting system. very good condition. Hnodsiiia Rspfx Ah Nsg

Condition: good (used), Nagel Citoborma 280B Paper Drill The device is 100% functional. This is one of the newest models. The drill table is adjustable in every plane (sides, front/back). It has limiters for setting the drilling spacing. The installed table is in an enlarged version. Additionally, the paper drill has an automatic table lock, which is released after each cycle. Super condition. Solid construction – weight 76kg. 380V power supply Two drilling heads, with adjustable spacing within the range of 45-120 mm. Drill diameter 2-20 mm. Hnjdpsx Tvlisfx Ah Nog Stack height 60 mm. The machine has been inspected The set includes drills and tools, a new cutting stick, and an instruction manual.

Condition: used, Items as new or nearly new and used wood drills mainly in sizes 10, 13 and 26 mm. Remaining stock of a double-end profiler with drilling assemblies. Hsdjx Tvbwjpfx Ah Neng

Condition: used, Manufacturer: Kilia Type: Grinders Mincer Mixer Height: 1500 mm Hnedpjt Up I Dsfx Ah Neg Width: 1000 mm Length: 1100 mm Voltage: 400V 50Hz 3N Power: 11/15 kW Throat Diameter: 130 mm Main material: Stainlees Steel

Condition: excellent (used), Year of construction: 2012, Large grinder for fresh meat, these models were previously known as Wolfing C250UNI. Excellent condition. With de-gristle unit. Hsdpfx Ahovvn Ico Neng

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm Hsdjw I R Tijpfx Ah Neng - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: new, BRAND NEW T-TYPE FLOOR BORING AND MILLING MACHINE HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 1,500 mm Y-axis (cross ram): 1,300 mm V-axis (column traverse): 1,000 mm Rotary Table (C-axis): 2,000 x 2,000 mm Max. table load capacity up to 15,000 kg Automatic universal 1° x 1° swivel head (optionally with fixed quill Ø 210 mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS – internal coolant supply – 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Hedpfoq I Nkbsx Ah Nong Chain-type tool changer: 60 stations (vertical / horizontal change) Double hinged belt chip conveyor (longitudinal) Perimeter guarding (open top) Only inquiries from Germany will be answered.

Condition: excellent (used), Year of construction: 2007, 5 controlled axes: X, Y, Z, A, and B Fully automatic grinding wheel changer NUM Axium Power 1050 control system with PC TOOL DATA Hnedpfx Ahsxt N Izo Neg Max. diameter: Ø 250 mm Max. diameter for complete machining: Ø 250 mm Max. length for complete machining (from front edge of workpiece support): 430 mm Max. tool length between centers: 480 mm Center height: 195 mm X-axis grinding travel: 625 mm Z-axis cross slide travel: 305 mm Y-axis vertical slide travel: 305 mm All linear axes are driven by high-precision ball screw spindles with 2 preloaded nuts. The axes are guided on extremely robust recirculating roller shoes on hardened rails. GRINDING HEAD, B AXIS Swiveling range in the horizontal plane: 240° Rotational speed: 120°/s Liquid-cooled motor spindle: 150 x 150 mm Grinding wheel mount with automatic quick-clamping system HSK - C/E 50 Spindle speed infinitely variable: 2,000 - 10,000 rpm Max. grinding wheel diameter: 150 mm Grinding wheel changer with 4 magazine slots Second probe arranged on the workpiece holder for automatic grinding wheel measurement, including software CHAIN LOADING MAGAZINE with PICK-UP arm Capacity: 160 tools Maximum workpiece diameter: 32 mm Maximum workpiece length: 200 mm Maximum tool weight: 2.5 kg CNC-controlled steady rest TURBO separator (filter system)

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,550 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, clearance between the columns: 750 mm, Equipment: documentation/manual, CNC Jig grinder HAUSER S 40 400 TECHNICAL CHARACTERISTICS : Stroke X axis : 650 [mm] Max. Stroke speed X axis : 4000 [mm/min] Working feed X axis : 0 - 1800 [mm/min] Stroke Y axis : 450 [mm] Working feed Y axis : 0 - 1800 [mm/min] Stroke Z axis : 130 [mm] Min. Stroke speed Z axis : 0.5 [mm/min] Max. Stroke speed Z axis : 12000 [mm/min] Stroke frequency Z axis : max. 4 [Hz] Stroke W axis : 500 [mm] Planetary speed C axis : 5 - 250 [rpm] Max. Stroke speed W axis : 800 [mm/min] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 750 [mm] Table length : 770 [mm] Table width : 630 [mm] Clearance between grinding motor and table : 585 [mm] Max. load on table : 500 [Kg] Supply voltage : 400 [V] Weight : 4550 [Kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022 x3 grinding tools for slot grinder x1 set of belts for slot grinding motor x1 intermediate plate for alignment of grinding motors - reference: 192940 x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023 x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148 x1 set of 2 HAUSER 90° angle brackets - reference: 155361 x1 centring microscope - reference: 146318 x1 tool contact detection device - reference: 162334 x20 grinding wheel holders x1 cable for grinding motor Various tools Complete documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. Hnjdpfowu Dwpex Ah Neg The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: used, Manufacturer: Seydelmann Type: Grinders Mixer 2-speed working worm 1-speed mixing paddle motor, 1.5 kW with 2 mixing arms, independent of working worm Height: 1450 mm Width: 900 mm Length: 1250 mm Voltage: 400V 50Hz 3N Power: 20.0 kW 37 A Hnjdpfx Ast Up N Ioh Njg Throat Diameter: 130 mm Main material: Stainlees Steel Machine weight: 680 kg

Condition: excellent (used), Nice mixer grinder for large butchers or catering butcher, sausage/burger factory use. Hodpjxxd E Sjfx Ah Nsng

Condition: excellent (used), Catalogue number 7733 TECHNICAL DATA - Belt width: 150mm - Oscillation - Vertical oscillation movement - 2 rotation speeds - Work table: 1180x370mm - Work table adjustment: up/down, front/back and at an angle - Motor: 3kW - Platen - for precise grinding - With fan - Effective sanding length on belt: 700mm - Top/bottom milling cutters for edge chamfering Hjdpfsxdc Enjx Ah Njng - Extraction port diameter: 70mm - Dimensions (L/W/H): 1550/1400/1300mm - Weight: 490kg ADVANTAGES – with oscillation – with platen – with fan – includes milling cutters for edge processing/chamfering – for both curvilinear and straight sanding – unpainted – used machine, in very good condition Net price: 7500 PLN Net price: 1780 EUR (based on exchange rate 4.2 EUR) (Prices may vary with greater rate fluctuations)

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, BRAND NEW BORING MILL (T-CONSTRUCTION) Hsdpfx Ajxc Hphsh Nsng Controls and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package: motors, measuring systems, and handwheel IKZ: Internal coolant supply, 20 bar Additional Equipment: Chain-type tool changer with double gripper, 60 positions Double hinge belt chip conveyor (longitudinal), one at the front and one at the rear Perimetric enclosure Spindle support bearing 250mm Hinged belt chip conveyor RENISHAW RMP 60 touch probe Only inquiries from Germany will be answered.

Condition: used, Meat grinding machine Hodpfexrhfpsx Ah Neng Manufacturer: Sind Voltage: 380V / 50Hz

Condition: good (used), GEA AutoGrind 200 grinder for fresh and frozen meat. Currently missing both screws. Can be sold ’as is’ or complete. Hnedpfxex Alnco Ah Neg

Condition: excellent (used), CATALOG NUMBER 7769 TECHNICAL DATA - Loading hopper dimension (top, L/W): 650x240 mm - Rotor width: 360 mm - Motor: 7.5 kW - Screen: 8 mm - Knife width: 90 mm - Number of knives: 3 rows of 4 pcs - Throughput: approx. 700 kg/h - Extraction outlet diameter: 100 mm - Dimensions (L/W/H): 1200x830x1440 mm - Weight approx.: 300 kg FEATURES – Made in Poland – Unpainted – Mobile – Very good condition – Used chipper Hnsdexix Szopfx Ah Nog Net price: 16,900 PLN Net price: 4,020 EUR (depending on exchange rate 4.2 PLN/EUR) (Prices may change due to exchange rate fluctuations)

Condition: used, functionality: fully functional, Grinder for mincing meat Manufacturer: Sind Voltage: 380V / 50Hz Power: 11kW Size: 1250x800x1110mm Hnodpfx Ahoxrhbdo Njg Weight: 319kg

Condition: used, Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Lowest noise level Hnsdpfxet Uqblj Ah Neg Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Condition: used, functionality: fully functional, Grinder for mincing meat Manufacturer: Sind Hjdpfx Asxrhbkjh Nong Voltage: 380 / 50Hz Power: 15kW Size: 1550x900x1300mm Weight: 493kg

Condition: new, Meat grinder Manufacturer: Ital Form Completely made out of stainless steel Dimensions: 980x605x900mm 320kg/h Voltage: 220V / 50Hz Hedex Dcd Dopfx Ah Njng Power: 2.2kW

Condition: like new (used), Meat mincer grinder Completely made of stainless steel Dimensions: 460×520×860 mm Electric power: 1.8 kW Voltage: 220V / 50Hz Capacity: 750 kg/h Hnjdpjxwfrksfx Ah Nog

Condition: like new (used), Meat grinder K+G Wetter Operating voltage: 400V / 50Hz Control voltage: 24V Power: 38kW Hodpox Aydlsfx Ah Njng

Condition: like new (used), Meat mincer grinder Completely made of stainless steel Dimensions: 415x705x930mm Electric power:1.8 kW Voltage: 220V/50Hz Hnedpfxexwfppj Ah Njg Capacity: 750 kg/h

Condition: new, Meat grinder Manufacturer: Ital Form Completely made out of stainless steel Voltage: 220V / 50Hz Power: 2.2kW Hedpfxjx Dcdqj Ah Nong