Used Pedestal Drill for sale (5,002)

Condition: good (used), Nagel Citoborma 180 Paper Drill with Pedestal The machine is in 100% working order. Very good condition. Solid construction – weighs approximately 100 kg. This is one of the newest Citoborma drill models. 380V power supply. Gtodpfx Aox N I Syogbot One drilling head. Drill diameter: 2-20 mm. Stack height: 60 mm. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. In addition, the drill has an automatic table lock that releases after each cycle. The set includes drill bits, tools, a new cutting stick, and instructions.

Condition: ready for operation (used), Spindle taper Aciera Drilling capacity in steel 22 mm Throat 270 mm Table size 700 x 370 mm Spindle speeds , inf. variable 40-3'600 rpm Gtsdpfx Aeuy R T Tegbet MARCELS MASCHINEN CH

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm spindle distance max. 685 spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm autom. feed 224 mm/min. rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Godpjgd Ipkefx Agbott Mains connection 400 Volt, 50 Hz - Prduction drilling machine with spindle speed and feed rate - actual spindle speed 2000 rpm. - actual feed speed 224 mm/min. - 2 operating modes manual and automatic - electric drill head height adjustment - central lubrication - control cabinet at the rear side of the machine - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 900 kg good condition

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank Godpfen N Ekcex Agbott - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: used, Tube End Forming Machine, T-Drill SP-110, Used Machine Manufacturer: T-Drill Model: SP-110 Operation: Uncertain Overall Dimensions: Width: 930 mm Depth: 1520 mm Height: 1460 mm Weight: 600 kg Year of Manufacture: 2016 Air Pressure: 6 bar Electrical Data: 480V; 18.5 kW; 3x80A The T-DRILL SP-110 is a fully automatic tube end spinning machine capable of closing, reducing, and expanding primarily copper and brass tubes — typical applications include HVAC, refrigeration, and mechanical fittings. Technical Data (Summary): Tube diameter range: Ø 8 – 108 mm (≈ 5/16” – 4-1/8” O.D.) – T-Drill Oy Maximum reduction: 70% – T-Drill Oy Materials: primarily copper and brass (as highlighted in the manufacturer’s description) – T-Drill Oy Wall thickness / maximum wall thickness (according to used machine listings): e.g., one listing indicates 0.125" (≈3.2 mm) maximum wall thickness (depends on model/configuration) – Southern Fab Sales Gtedpfx Agexu E Duebjt Machine features: automatic clamping, rotation + forming tools (tooling/dies), suitable for forming long or complex tube ends. Capable of closing, flattening, reducing, and expanding tube end geometries; the manufacturer’s brochure contains detailed shapes and examples. Especially suitable for HVAC and industrial refrigeration tubes.

Condition: reconditioned (used), Year of construction: 2002, drill gomad WU 3G 2002 YEAR LIGNUM WU drills Drill WU 3G 3 TOP UNITS Flexible task drills with adjustable spacing of top, side, bottom and swivel drilling units equipped with multi-spindle drilling heads. Designed for drilling all kinds of holes. The modular structure provides many configuration options (working length, number of units, pneumatic clamps, etc.). They enable single- and multi-stage drilling and programming the operation of units depending on the needs. Feeding and receiving of the processed material is done manually. Other drilling functions are performed automatically (material pressure, simultaneous 3-sided drilling, pressure release). Spindle spacing scale according to the order 16 - 44 mm Distance between JC head units 250 - 2500mm Width of JG, JB, JC, JS units 160mm Unit feed cylinder stroke JG - 100mm, JB 100 (120mm) Maximum material width 200mm Maximum material thickness 50mm Maximum drilling diameter 35mm Spindle speed 3000rpm JB units spindle center height above table 6 - 35mm (55mm) Drilling unit engine power 1.1 kW Duration of one-stage and two-stage cycle 4 - 6 sec and 6 - 10 sec Air pressure required 0.4 - 0.6 MPa Compressed air demand 2 m3/h per drilling unit Type of feed drive pneumatic with stepless speed regulation Supply voltage 400V, 50Hz Overall dimensions (L x W x H) 2200 - 4000 x 1500 x 2000mm Weight 2500 - 3000 kg Contact the advertiser Przemyslaw Kretowicz is online lignum 602 Show number Gtedei Hqhfopfx Agbjt

Condition: good (used), Year of construction: 2000, 6 bar pressure with insertion device for cup hinges with 5-hole row, 1.6 kW, 380 Volt. Includes 3 drills for cup hinges and foot switch. Gsdox U Di Espfx Agbstt

Year of construction: 2000, condition: used, core boring STIHL number 2 Stück Gtjdpfx Aox U A Ndogbot 1 Stück 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Gtodpfx Asx Uyzqegbet ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Nagel Citoborma 280B Paper Drill The device is 100% functional. This is one of the newest models. The drill table is adjustable in every plane (sides, front/back). It has limiters for setting the drilling spacing. The installed table is in an enlarged version. Additionally, the paper drill has an automatic table lock, which is released after each cycle. Super condition. Solid construction – weight 76kg. 380V power supply Gtjdpfx Agsx Tvlijbst Two drilling heads, with adjustable spacing within the range of 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been inspected The set includes drills and tools, a new cutting stick, and an instruction manual.

Condition: used, Items as new or nearly new and used wood drills mainly in sizes 10, 13 and 26 mm. Remaining stock of a double-end profiler with drilling assemblies. Gsdpfx Asx Tvbwegbett

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm Gsdpfx Agow I R Tiebott - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: new, BRAND NEW T-TYPE FLOOR BORING AND MILLING MACHINE HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 1,500 mm Y-axis (cross ram): 1,300 mm V-axis (column traverse): 1,000 mm Rotary Table (C-axis): 2,000 x 2,000 mm Max. table load capacity up to 15,000 kg Gtjdpeq I Nkbjfx Agbet Automatic universal 1° x 1° swivel head (optionally with fixed quill Ø 210 mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS – internal coolant supply – 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Chain-type tool changer: 60 stations (vertical / horizontal change) Double hinged belt chip conveyor (longitudinal) Perimeter guarding (open top) Only inquiries from Germany will be answered.

Condition: used, Year of construction: 1980, table length 550 mm Gtjdpfxsgvi I As Agbot table width 550 mm table swivelabel +/- 90 ° no. of flutes 4 weight of the machine ca. 600 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2023, condition: new, machine/vehicle number: PRJ065955, ALZMETALL bench drill drilling capacity in steel 12mm Drill chuck mounting B16 outer taper, spindle stroke: 40mm, throat: 200mm, column diameter: 50mm, machine table usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min./max. 110/250, feed by hand, machine height without options: 670mm, net weight: 64 kg. - Speed infinitely variable 250-5000 rpm Standard equipment: 5" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in display, machine status indicators and warnings in display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. Gtjdpfx Agjlub Rdjbot AC motor 230 Volt, 50 Hz, Connector plug ready mounted, Cable length 2m, Three separate buttons for clockwise - anticlockwise - stop, spindle stop by brake function, spindle protection with electrical fuse, main switch lockable, mushroom pushbutton (latching) for EMERGENCY STOP, speed adjustment infinitely variable by means of potentiometer, protection class IP54, spindle protection with electrical fuse, paint finish: DD structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein

Condition: excellent (used), Professional drill chuck with SK40 / ISO40 taper, compliant with DIN 69871 A standard. Manufacturer: EROGLU Präzisionswerkzeuge (Germany) – high-precision manufacturing. Model: 03180PB05553 (3/16-IK). Maximum tightening torque: 20 Nm – ideal for drilling and tapping with controlled force. Version with internal cooling (IK – Innenkühlung). Chuck with torque adjustment + / –, allowing protection of tools and workpieces. Solid and durable industrial design – suitable for use in CNC machining centers and conventional machines. Condition: used, in very good technical condition – ready for immediate use. ✅ German quality – precision industrial-grade drill chuck ✅ Ideal for production and workshop applications. Gtsdpexlcz Sofx Agbjt

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, BRAND NEW BORING MILL (T-CONSTRUCTION) Controls and Motors: Gtedpfx Agoxc Hphobot HEIDENHAIN TNC 640 digital path control HEIDENHAIN package: motors, measuring systems, and handwheel IKZ: Internal coolant supply, 20 bar Additional Equipment: Chain-type tool changer with double gripper, 60 positions Double hinge belt chip conveyor (longitudinal), one at the front and one at the rear Perimetric enclosure Spindle support bearing 250mm Hinged belt chip conveyor RENISHAW RMP 60 touch probe Only inquiries from Germany will be answered.

Condition: new, Year of construction: 2023, machine/vehicle number: PRJ065958, ALZMETALL bench drilling machine drilling capacity in steel 16mm Short spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-table min./max. 75/357mm, machine table height adjustment via hand crank, machine table base plate, usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min. / max. 437/437mm, feed by hand, machine height without options: 825mm, net weight: 83 kg. - Speed infinitely variable 100-2000 rpm Standard equipment: 5" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in the display, machine status indicators and warnings in the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, Connector plug ready mounted, Cable length 2m, Three separate buttons for clockwise - anticlockwise - stop, spindle stop by brake function, spindle protection with electrical fuse, main switch lockable, mushroom pushbutton (latching) for EMERGENCY STOP, speed adjustment infinitely variable by means of potentiometer, protection class IP54, spindle protection with electrical fuse, paint: DD structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Gsdelubw Iepfx Agbstt Delivery time: ex stock Waiblingen Beinstein

Condition: excellent (used), Professional drill chuck from the renowned brand GEWEFA, made in Germany. Designed for clamping drills with a diameter from Ø2.5 to 16 mm in CNC machines, machining centers, and conventional milling machines. The high-quality construction ensures excellent concentricity, secure tool holding, and long service life even under intensive production work. Type: SK40 × Ø2.5–16. Catalogue number: 28.05.046.002. Taper: SK40 DIN 69871. Manufacturer: GEWEFA – Made in Germany. Year of manufacture: 2007. Condition: very good, used. An ideal choice for professional industrial applications and metalworking workshops specializing in precision machining. Price is per unit. Gtedpfsxizauox Agbot

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: Gsdpfxexdh Hqo Agbjtt • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: excellent (used), For sale: Complete Waldmann & Weigl ER-220 electrical discharge machine, designed for precise removal of broken drills, taps, and cutting tools. Professional workshop solution from Germany, ideal for toolrooms, service shops, and mechanical workshops. • Manufacturer: Waldmann & Weigl GmbH, Germany • Model: ER-220 • Power supply: 220 V / 50 Hz • Working current: 1.5 A • Electrode range: from Ø1.0 mm to Ø10 mm (copper, tubular) • 6-stage erosion voltage adjustment (from gentle to intensive burning) • Electrode holder with height adjustment • Cooling pump with water tank • Control panel with operating mode selection • Complete documentation in German (original manual) • All components mounted on a mobile workshop table with castors. The machine is fully operational, complete, and ready for use. Indispensable for fast and safe removal of broken tools from workpieces without risk of damaging the component. Gsdpfxow Syyyj Agbstt

Condition: excellent (used), For sale: Professional WNT tool holder SK40 Ø12x80 capable of operation up to 25,000 rpm (balanced to G2.5). The holder comes complete with a ventilated drill – ideal for machining with internal cooling. Excellent condition, the tool has been tested and is ready for use. Top-class equipment, designed for precision machining on CNC centers. Gsdpfx Ajw Rrw Ujgbett

Condition: good (used), I SELL FEIN PS 50 MAGNETIC DRILL. IN VERY GOOD CONDITION. Gtodpfxeulc Tuo Agbot

Condition: excellent (used), I sell a HANG 106DTK paper drill, operational in good condition. There are several Hang drills on offer. Gtedsudpc Sepfx Agbet

Condition: excellent (used), For sale: professional German paper multi-spindle drill HANG 106 DTK 20. Industrial-grade equipment, ideal for bookbinding shops, printing houses, or the production of binders and calendars. Model: HANG 106 DTK 20 Manufacturer: Constantin Hang Maschinenfabrik Göppingen Number of spindles: 4 Drilling diameters: • Cardboard/paper: up to 3.0 mm • Material samples: 2.5 mm / 6.0 mm / 12.0 mm Drive: PRYM Getriebebau geared motor, 50/60 Hz Stable cast iron construction Godpfx Ageudl Anobjtt Adjustable work table Complete machine, ready for operation Technical condition: very good. Used but well-maintained, no play, with original nameplates and operating documentation.