Used Medical Clamps for sale (9,232)

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm Iasdpfofbt Husx Ah Nel - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, Year of construction: 2022, clamping force: 65 kN, displacement volume: 154 cm³, injection pressure: 2,429 bar, overall weight: 3,900 kg, load hours: 463 h, screw conveyor diameter: 35 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Iedpfx Asyaciyjh Nsal

Condition: ready for operation (used), Year of construction: 2010, screw diameter: 25 mm, This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information. • Tiebar spacing: 470x470 • Single platen: Yes Iasdpfxjx D R Epo Ah Njl • Operating voltage: 400 V 3~ 50 Hz • Control voltage: 230 V ~ 50 Hz, 24 V DC • Motor/heating rated current: 76 / 59 A • Total rated current: 135 A • Total connected load: 76 kW

Year of construction: 2002, condition: used, Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Ijdpfx Ahsyabzuo Nsal Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung

Condition: used, Year of construction: 1997, Description: Suitable for regrinding and manufacturing new wooden and metalworking tools of all kinds. Accessories: Software Package 1 (cylindrical tools sharp-edged, corner and full radius), Software Package 2 (conical-spiral tools sharp-edged, corner and full radius), Software Package 3 (drills and step drills), Software Package 4 (step tools) Software Package 6 (woodworking tools), Software Package 16 (warming-up program), Software Package 27 (free programming), Heli-Flute & Cone (flute calculation program for cylindrical and conical mills), stepless speed control, pneumatic workpiece clamping, Probe, automatic fire protection system, electrostatic extraction, oil collection tray, automatic central lubrication, X axis longitudinal movement: 400 mm Y - axis vertical movement: 250 mm Z-axis cross movement: 580 mm C-axis rotary table: Swivel range +/- 200 ° Workpiece holder: ISO 50 max. workpiece length: 270 mm max. grinding wheel diameter: 200 mm, Iasdpfx Ahox H Nqlj Nel Max. Workpiece diameter: 260 mm Grinding spindle speed infinitely variable: 0 - 9500 rpm. weight: approx. 3200 kg Drive power grinding spindle: 10,0 kW Connected load: 15 kVA (400 V / 50 Hz) Dimensions W x D x H: 2000 x 2010 x 2150 mm colour: grey RAL 7035/7043

Condition: good (used), Year of construction: 2020, 5-Axis CNC Machining Center - Universal - Manufacturer: MAZAK Machine Model: Variaxis J-500 Control Unit: Mazatrol SmoothG Year of Manufacture: 2020 Number of Controlled Axes: 5 TECHNICAL DATA Travel - X-Axis (mm): 350 - Y-Axis (mm): 550 - Z-Axis (mm): 510 - Swivel Range A-Axis (degrees): -120 / +30 - C-Axis (rotary axis, rotary and tilt table): (degrees): 360 Feed Rate X/Y/Z (mm/min): 8,000 Rapid Traverse - X-Axis (mm/min): 30,000 Iaedoyabu Iopfx Ah Nol - A-/C-Axis: 10,800 degrees/min. Spindle - Max. Spindle Speed (rpm): 12,000 - Drive Power (ED) 100 / 40 (kW): 7.5 / 11.0 Tool Magazine - Tool Holder: BT40/CAT40 - Pull Stud: Yamazaki ANSI Type - Number of Tool Positions: 30 - Tool Diameter (mm): 90 - Tool Length (mm): 300 Machine Table: Swivel rotary table Pallet System - Pallet Changer: 2-position - Clamping Table Dimensions (mm): 500 x 400 Swivel Rotary Table - Rotary Table Diameter (mm): 500 x 400 - Max. Workpiece Weight (kg): 200 FEATURES + Through-spindle coolant 70 bar + Hinged belt chip conveyor + Oil mist extractor + Tool length measurement and breakage control + Additional interior lighting + Signal tower (3-color) Subject to change and errors in technical details and specifications.

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Ijdjhmmfkopfx Ah Nsal Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: excellent (used), Omga V 113 P double mitre saw for frames Double saw set at a 45-degree angle Saw blade diameter: 300 mm Saw blade bore diameter: 30 mm Two motors, each with 1.1 kW power Maximum cutting width: 70 mm Maximum cutting height: 75 mm Pneumatic material clamps Iodpfsyaa Uysx Ah Neal

Year of construction: 2016, condition: ready for operation (used), This HAITIAN JU9000II/6800 PLUS was manufactured in 2016. It features a clamping force of 9000 kN and an injection unit with a capacity of 2362 cm³. Operating on a 400 V / 50 Hz power supply, it consumes 199 kW and handles a rated current of 354 A. Weighing 39,000 kg, consider the opportunity to buy this HAITIAN JU9000II/6800 PLUS hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping force: 9000 kN • Injection unit – screw: 2362 cm³ / 80° • Power supply: 400 V / 50 Hz Iaodpfx Aheyab Afj Nel • Power consumption: 199 kW • Rated current: 354 A • Short-circuit withstand current (In): 25 kA • Machine weight: 39000 kg

Year of construction: 1999, condition: used, Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Iedow Dplkopfx Ah Noal Miter cuts possible on both sides 2-Hand-Bedienung 800 kg

Condition: excellent (used), Year of construction: 2016, Equipment: documentation/manual, Clamping force: 70 t Screw diameter: 40 mm Distance between tie bars V: 370 mm Distance between tie bars H: 370 mm Tie bar distance: 370x370 mm HxV plates: 510x510 mm Mould tickness min-max: 200 Stroke: 400mm Shot volume: 188 cm3 Type: Uni Drive: Hydraulic Iedpfxoyabc Se Ah Nsal Air valve: 1

Condition: excellent (used), Year of construction: 2008, Absolute cycle counter: C120 = 048433176 Operating pressure (bar): 210 Injection force (kN): 693 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Nominal voltage (V / Hz): 400/50 Nominal current (A):136 Iajdpfjyabfgex Ah Njl Rated power (kW): 75

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm Iaedpfx Aeiv Irljh Nol - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm dead weight: 65 kg good condition

Condition: used, cutting height (max.): 105 mm, cutting width (max.): 1,550 mm, cutting length (max.): 2,500 mm, total length: 430 mm, saw blade diameter: 350 mm, cutting height with scoring (max.): 105 mm, – Polish production – DTR technical documentation – Electric saw blade spacing adjustment – Pneumatic clamps – With scorer unit TECHNICAL PARAMETERS: – Max. blade diameter: 350 mm – Spindle diameter: 30 mm – Height-adjustable blade (up/down) – Blade guard – Max. cutting height: 105 mm – Min. cutting width: 250 mm – Max. cutting width: 1550 mm – Max. cutting length: 2500 mm – Electric saw blade spacing adjustment – With scorer unit – Max. scorer blade diameter: 125 mm – Scorer spindle diameter: 20 mm – Main motor power: 2 x 4 kW – Scorer motor power: 2 x 0.75 kW – Carriage feed motor power: 0.37 kW – Pneumatic clamps: 2 pcs – Extraction port diameter: 2 x 120 mm Ijdpfx Ahjyaazyj Noal – Machine transport dimensions (L/W/H): 430 / 140 / 110 cm – Weight: ~1000 kg

Year of construction: 2014, operating hours: 39,176 h, condition: ready for operation (used), total height: 4,000 mm, product length (max.): 8,700 mm, This FERROMATIK K-TEC 200 2F was manufactured in 2014. A robust hydraulic injection moulding machine, it features a screw diameter of 18 mm and a clamping force of 200 KN. Ideal for working with materials like ABS and PC, it operates on 400V and 50Hz, ensuring efficient performance. Dimensions are 8700mm in length, 2300mm in width, and 4000mm in height. Consider the opportunity to buy this FERROMATIK K-TEC 200 2F hydraulic injection moulding machine. Contact us for more information. • Clamping Force 200 KN • Screw Diameter: 18 mm • Previous Material Use: ABS, PC • Turning System (HxV): 750 x 750 mm • Power Rating: 192 KW • Voltage: 400V, 50Hz Dimensions Iaodpfxsyabtdo Ah Nsl Machine Depth 2300 mm

Condition: used, Year of construction: 2012, Technical details: turning diameter: 420 turning length: 1230 mm swing over bed: 700 mm swing diameter over slide rest: 550 mm centre distance: 1390 mm y-axis: +/- 60 mm turning speeds: 3500 1/min turret (x-stations): 12 power capacity: 22 / 18,5 kW : 1 / 12 x BMT rapid traverse x + z axis: 20 / 24 m/min : 76 mm total power requirement: 50 kVA weight: 7,8 t dimensions of the machine ca.: 4,10 x 2,05 x 2,21 m Iaedpfx Ast Acy Ajh Nol CNC lathe with Y-Axis and driven tools, C-axis, tool eye, hydraulic 3-chaw-juck D= 250 mm, reinforced pump 15 bar, pressure-compensated clamping cylinder , 2 step clamping pressure, prepared for steady (without steady), progr. tailstock (dragging device), live tool device (3,7 kW, 3.000 rpm), chipconveyor, 1 pcs. live tool included approx. 15.500 working hours *

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table Iaedpfx Aomck Rysh Nsl - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: ready for operation (used), Year of construction: 1996, This Emmegi Radial Star TU/6 was manufactured in 1996. A used double miter saw, it features a roller conveyor, clamping device, and upgraded PC control. Its design is precise, stable, and robust, ideal for detailed metal sawing tasks. Consider the opportunity to buy this Emmegi Radial Star TU/6. Contact us for more information. • Condition: Used, well-maintained, and ready for use • PC control: Upgraded • Design: Precise, stable, and robust • Note: No dust extraction • Additional equipment • Roller conveyor, right-hand side, 3000 mm • Clamping device (section side) • Spacer profile for roller conveyor (LMS-D 450/500) • Pneumatically swiveling material roll support • Lubrica lubrication unit for LMS-D • Digital miter display for pre-selecting intermediate miters (LMS/LMS-D) • Label printer UBI Easy Coder 101 for LMS-D • Thermal paper roll labels with removable adhesive (for Formula 21/S or UBI Easy label printers) • Software extension for extra-long cutting up to 9000 mm (LMS-D) • Software extension for cutting corner angles • Software extension for cross-cutting Iasdpfx Ahex D D Auo Njl • Drivers for Schüco systems

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment Isdpfx Ahslhwr Re Njal - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill Iasdpfjqa Txqex Ah Nsl throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Iasdpfx Ahoib D H Rj Nsl Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Iajdpfx Ahjhik Ezo Njl Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam Iajdpfx Asxpqy Dsh Nel - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, Vertical milling head, milling head with motor drive THIEL Isdexddwrjpfx Ah Noal Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Isdpfx Aow Iq Ugoh Nsal Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition