Used Meat Saw Bas 315 for sale (11,814)

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Dodpsw Sy T Hefx Akcocg

Condition: used, Year of construction: 2009, Cutting length: 4200 mm Cutting width: 3200 mm Max. saw blade protrusion: with blade vertical at 0° = 70 mm with blade tilted at 45° = 50 mm Feed speed forward: 0-80 m/min. Feed speed reverse: 100 m/min. Weight: approx. 5400 kg. Motor power: 14 kW Scoring saw: 1.5 kW Tool: diameter: 350 mm bore: 30 mm Extraction port (bottom): 140 mm Extraction port (pressure beam): 100 mm Storage location: Supplier Dcjdpfx Akeyf Nu Tocjg

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Dedpfxsufgnze Akcocg Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Condition: excellent (used), I sell a massive band saw for cutting metal in bdb condition. Dedpou Udrisfx Akcocg

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Dedpfxjvbwfnj Akcjcg

Condition: excellent (used), Year of construction: 2015, Cutting length: 5300 mm Cutting height: 2100 mm Cutting depth: 80 mm Scoring unit: no Feed: manual Horizontal cut display: scale Vertical cut display: scale Saw blade diameter: 300 mm Dcsdpfxoy Iuqyo Akceg Retractable material support: yes Saw blade speed: approx. 4000 rpm Motor power: 4 kW Machine length: 5500 mm Machine depth: 1500 mm Machine height: 2800 mm Operating hours counter Weight: 800 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Fully automatic vertical machine, Cutting area 5,300 x 2,200 mm (cutting width x cutting height), Saw blade diameter 300 mm, Control for vertical and horizontal cuts, with ALU folding stops and ALU center support, with SUPER-CUT scoring unit Dsdpfox Rr D Aex Akcocg Motor 3 kW - 400 V Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 2002, Veneer saw Mayer FH2-3120, precision cut saw with jointing unit (planing unit) and veneer stop table Robust Mayer machine construction A video of the machine in operation can be sent on request. For splinter-free and tight joint cutting of veneer, including thick-cut veneer Max. cutting length: 3100 mm Saw unit and jointing unit are combined in one assembly, so only one unit needs to be moved. Easily guided saw unit running on linear guides Djdpfx Akeyug Hrscjcg Rear support table with through finger stop, adjustable from approx. 2 to 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor: 1.8 kW, milling unit: 1.0 kW Motors can be conveniently switched on at the handle, operating only when needed HM-tipped fine cut blade, sharpened Planer head Z4, fitted with new carbide reversible knives Practical front veneer tray, extendable for planing unit Dust extraction port 100 mm with extraction duct Extraction hoses and V-belts replaced Compressed air maintenance unit replaced CE marking Operating manual Onboard tools Original paintwork, only a few spots touched up Approx. dimensions: 4350 x 1700 x 1400 mm (L x W x H). Weight approx. 800 kg. The machine can be demonstrated on site by prior appointment. We only offer machines that are ready for demonstration from our warehouse. See "More offers from this seller."

Condition: used, Year of construction: 2021, only 24 operating hours – like new Base machine 1 pc Cutting technology meets the future The CONTROL series has always defined its own class – the premium class for vertical panel saws. But even this lead never stands still. We have developed the CONTROL into a vertical panel cutting centre of the premium class, with higher automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and new machine software provide improved user comfort in every detail. Saw Frame • Precision manufacturing to 1/100 mm in key components • Massive, self-supporting welded saw frame with high torsional rigidity • Full-surface support panel made of birch plywood with integrated small parts shelf • Auxiliary stop profile with its own tape measure and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller lock during the cutting process Saw Beam • Stable, durable steel saw beam construction • Automatic saw beam locking with cut position detection Saw Unit • Play-free, smooth-running guides • Robust motor carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Enhanced operator comfort thanks to largely automated operation • Laser-assisted display of horizontal cuts • Automatic clamping of the motor carriage • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for quick change to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control System • 12" touchscreen computer with optimal user guidance • Multilingual user interface • Tool database for high flexibility and absolute repeat accuracy • Fully automatic sawing process • Variable feed speeds from 10–25 m/min • Selectable saw cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity Dimension Adjustment • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Design, Ergonomics • STRIEBIG’s signature product design Djdpjyyqz Sofx Akcocg • Multiple awards (including the Swiss Design Award) • Functionality and operator-friendly ergonomics Installation • Wall-mounted or free-standing (option) installation possible Note: Permissible ambient temperature: min. +5°C / max. +40°C Relative humidity: 19–95% If mains voltage fluctuations exceed ±10% of the nominal voltage at the installation site, a voltage stabilizer must be used. Type 5216 Cutting range 4300x2160/2016x80mm 1 pc Cutting length: 4300 mm Cutting height vertical cut: 2160 mm Cutting height horizontal cut: 2016 mm Max cutting depth: 80 mm Min cutting depth (automatic feed): 4 mm Min cutting depth (manual feed): 2 mm Exact installation dimensions can be found in the brochures or installation diagrams. ProLock Easy-Fix tool clamping system 1 pc Electronic positioning system "EPS-X" (horizontal axis for vertical cuts) 1 pc Paper holder 1 pc Small parts support, aluminum (2 pieces) 1 set Kit for free-standing installation (Types 5168, 5216, 5224, 6168, 6216, 6224) 1 set Storage location: Customer

Condition: good (used), Year of construction: 2012, Automatic panel saw for chip-free and dimensionally precise cutting of coated and uncoated wood-based panels and materials that can be processed like wood-based panels. Control panel on the right. Scoring saw Cutting length: 4300 mm Cutting width (program pusher travel): 3100 mm Roller tables: 4 pcs Two-finger clamping grippers Required space approx. 6520 x 6550 mm Data taken from the documentation. All details without guarantee. Availability: Expected December 2026 Dsdpsy N R Scjfx Akcocg

Condition: ready for operation (used), Brand: Rüco Tech info: Max distance between blades: 1830 mm Stroke length: 1600 mm Max saw height: 70 mm Dsdpfx Aksm Sghxocjcg Blade diameter: 350 mm With pneumatic material pressure unit Engine power of each engine: 2.2 kW Power: 50 Hz, 380V, 3-phase Stock no: 2001575BXA

Condition: ready for operation (used), Year of construction: 1975, Cutting saw Randek Model: 1-5-S Djdpfx Aeldg Skokcocg Machine no: 431 Year of manufacture: 1975 Tech. info: Blade diam: 700mm Rotating blade in degrees In and out feeder: 4 m in, 5 m out Stock no: 2001525BXM

Condition: ready for operation (used), Year of construction: 1998, Brand: Schelling Model: FL430/410 Machine no.: 211.178 Year of manufacture: 1998 With front and rear feed Technical data Dsdpoxf Idxofx Akcscg Saw length 4200 Pusher 4100 Setup 7×10 m (length×depth) Lifting table 6.5 tonnes

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Dedpfxotk It Sj Akcscg Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: ready for operation (used), For aluminum, cutting length 6000mm Saw blade diameter maximum 450mm Swivel range: 90°- 45° pneumatic With hydropneumatic saw feed Horizontal workpiece clamping Dcsdpswvqt Hsfx Akcsg Vertical workpiece clamping Fixed unit on the left, the right unit is movable Digital positioning control Roller track moving with the right saw unit

Condition: ready for operation (used), Year of construction: 1999, Brand: Homag Type: Optimat CH 03/32/32/E Plus Dcodpfx Aksvwku Ueceg Serie no: 0-341-07-5006 Year: 1999 Techn info: Saw width, with fence: 3 200 mm Saw length: 3 200 mm Cutting height: 50 mm Main saw blade: Ø 300 x 75 mm Scoring saw blade: Ø 125 x 45 mm Main saw speed: 5 100 rpm Scroll saw speed: 5 500 rpm Program carriage feed: 14 m/min Saw carriage feed, forward and return: 6-32 m/min Return feed: 32 m/min Main saw motor power: 5.50 kW Scroll saw motor power: 0.55 kW Operating voltage: 380 V, 50 Hz, 3 phase, 32 amps Control voltage: 24 V DC Floor quality: min. 5 Kp/cm² Connection cable: 5 x 6 mm² 1 fixed, coated front table 1 750 x 400 mm Stock no: 2002415BXM

Condition: used, functionality: unexamined, machine/vehicle number: 1205, input voltage: 380 V, Used Holz-Her 1205 Vertical Panel Saw – Wall Saw – Panel Saw with Saw Blade Dsdpsxiwvlofx Akcecg Manufacturer: HolzHer Model: 1205 Cutting range: 445 cm width, 175 cm height Voltage: 380 volts.

Condition: excellent (used), functionality: fully functional, Motor power 2.2 kW Manual feed of the aggregates Blade diameter 330 mm Dodpfxoy N Ribe Akcecg 3000 rpm Maximum aggregate spacing 3300 mm Cutting angle adjustment -45/+45 degrees Vertical pneumatic clamps Cutting process started by foot pedal Safety switch Width 900 mm, height 1500 mm

Condition: ready for operation (used), functionality: fully functional, 6226 - OMS INVINCIBILE OK 330 DOUBLE MITER SAW Motor power: 1.8 kW Manual movement of the units Blade diameter: 330 mm 3000 RPM Maximum distance between units: 3500 mm Cutting angle adjustment: -45°/+45° Vertical and horizontal pneumatic clamps Cutting process started by two buttons Safety switch Width: 900 mm, Height: 1500 mm Dcsdpfoy N Rg Tjx Akcog Year: 2003

Condition: excellent (used), functionality: fully functional, blade diameter 300mm Dcjdpfxoy N N Rke Akcsg motor power 1,6HP - 1,16kW max cutting dimensions 100x135mm angle cutting +/- 45 degrees

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, cutting height (max.): 460 mm, cutting width (max.): 460 mm, cutting range round steel at 90°: 460 mm, stroke length: 600 mm, Bomar Compact 460A 2007 year of made 2m runways Dcsdpfx Aksxzymweceg 3m runways chipconvyer Price its without dismantling and loading

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 230 V, cutting width (max.): 407 mm, total height: 2,000 mm, total length: 1,400 mm, total width: 2,500 mm, empty load weight: 3,500 kg, cutting range round steel at 90°: 407 mm, cutting speed: 300 mm/min, saw band length: 5,120 mm, saw blade length: 5,120 mm, MEBA 407A-OV CNC Horisontal saw Feeder lanes Dcjdpfoxz Dkyex Akceg 2005 Year of make Siemens Controller Chip convoyer 5,5 kW 3,5 t L 1,4 x B 2,5 x H 2 m saw band length: 5120 mm cutting speed: 15 - 150 m/min clamping height: 10 - 407 mm clamping width: 10 - 407 mm cutting range: 407 x 407 mm cutting range round: 407 mm down speed stepless: 0 - 300 mm/min.

Condition: used, Year of construction: 1997, machine/vehicle number: 3073, functionality: fully functional, input voltage: 400 V, input current: 34 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 60 mm, cutting width (max.): 2,850 mm, saw blade diameter: 125 mm, saw blade bore: 30 mm, rotational speed (max.): 2,870 rpm, total length: 5,430 mm, total width: 5,040 mm, total height: 1,640 mm, overall weight: 3,150 kg, cutting length (max.): 3,200 mm, compressed air connection: 6 bar, feed length Y-axis: 3,200 mm, feed rate Y-axis: 40 m/min, main saw diameter: 280 mm, saw drive: 7,500 W, Equipment: scorer, Used plasterboard saw with extraction system for sale For sale is a plasterboard saw with integrated extraction system, year of manufacture 1997. The machine is used but in good condition. Details: - Year of manufacture: 1997 - Condition: Used, but good - Including extraction unit - Location: DE 93326 Abensberg - Inspection under power possible by appointment Important information: Dcodpfxeyfg Rlo Akcog - Sale exclusively to commercial buyers. - Sale without any warranty. - All information provided without guarantee. If you are interested or have questions, please contact us to arrange a viewing appointment.

Year of construction: 1994, condition: used, We offer this used F. Zambon Rover 35 bridge saw, year of construction 1994. Manufacturer: F. Zambon Model: Rover 35 Dcjdjyuuudjpfx Akcsg Year of manufacture: 1994 Condition: used Category ID: 431 Type: Bridge saw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1979, saw blade diameter 300 mm cutting diameter 100 mm saw blade turning speeds 40 / 80 U/min capacity 90 degrees: square 90 mm capacity 90 degrees: round 100 mm total power requirement 1,5 kW Dcjdpsy N D Nnefx Akceg weight of the machine ca. 0,5 t