Used Matsuura for sale (44)

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 560 mm z-travel 500 mm Control Matsuura G-Tech 30i max. turning speeds 20.000 min/-1 number of tool places 210 Pos. total power requirement 52 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: - 5-pallet changer Itjdpfx Afjyigalskjh - new spindle including ceramic ball bearings - new spindle cooler Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2001, x-travel 660 mm y-travel 460 mm z-travel 500 mm table dimensions 940 x 460 mm Control Yasnac J300 spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Itsdpfx Aexxmmrofkoh Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 36 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 840 DI, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, overall weight: 15,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, tool weight: 10,000 g, input voltage: 415 V, input frequency: 50 Hz, input current: 50 A, Equipment: chip conveyor, MATSUURA MAM 72-25 V CNC Universal Machining Center - Tool holder: SK 40 - B-axis travel: -110°/+110° - C-axis travel: 360° - Distance between pallet surface and spindle reference line: -20 to 430 mm - Distance between B-axis center and spindle reference line: 4 - 410 mm - Distance between B-axis center and spindle reference line: -10 mm - Distance between pallet center line and bed 0-point: 265 mm - Distance between pallet center line and Y 0-point: 180 mm - Internal diameter of the spindle bearing: 70 mm Iedpfx Asy I Sfhjfkoth - Tool clamping force: 7.0 kN - Feed rate B-axis: 30/min - Feed rate C-axis: 50/min - Max. tool diameter: 80 mm, with free secondary stations: 150 mm The machine is equipped with a chip conveyor and a coolant system. Note: includes the tool holders located on the tool changer! Note: the machine can be transported on a truck up to 2700 mm wide! Note: the item must be picked up between August 24 and August 27, 2026, on a date to be determined. FCA D-61352 Bad Homburg - loaded onto a truck.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 19859, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 44 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 31i, total height: 3,200 mm, total length: 7,000 mm, total width: 6,000 mm, rotary table diameter: 500 mm, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 12,315 h, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 415 V, input frequency: 50 Hz, input current: 62 A, Equipment: chip conveyor, documentation/manual, MATSUURA MX-520 Universal Machining Center - Tool holder: SK 40 - A-axis travel: -125° to +10° - C-axis travel: 360° - 5-axis NC rotary table: 500 mm diameter Isdpfx Afey I Sq Reksth - Includes the tool holders shown in the photos! - Includes coolant system, extraction system, and chip conveyor Note: The machine vise shown on the rotary table is not included in the scope of delivery! Note: The machine can be transported on a truck with a width of up to 2500 mm! Note: The item must be collected between August 24th and August 27th, 2026, on a date to be agreed upon. FCA D-61352 Bad Homburg - loaded onto a truck

Condition: used, Year of construction: 2015, operating hours: 12,440 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 185 mm, nominal power (apparent): 30 kVA, spindle speed (max.): 42,000 rpm, input voltage: 415 V, type of input current: three-phase, Matsuura Lumex Avance-25 – Hybrid Additive Manufacturing System (used) For sale is a Matsuura Hybrid Additive Manufacturing System, Lumex Avance-25. This system combines additive manufacturing (sintering) and subsequent machining (milling) in a single process. As such, the system is particularly suitable for applications where functional surfaces or precise geometries are to be machined directly after the build. The system is designed as an open system: build parameters can be adjusted and further developed at the user’s discretion and based on their own experience. This also makes it ideal for research purposes and for the development of new material and process parameters. The Lumex Avance-25 is configured for titanium; the air filter and extraction system are explosion-proof for powder handling. The following powder types can be used: Martensitic steel II (1.2709) Stainless steel 630 Stainless steel 316L Cobalt chrome Nickel alloy 718 (Inconel 718) Aluminum Si10Mg Titanium 6Al4V (with corresponding shielding gas supply) It is possible to build with other materials or powder types if the build parameters are appropriately determined. Details: Year of manufacture: 2015 Ijdpfey Drwvsx Afkoth Spindle hours: 12,439 Laser hours: 3,476 Possible build size: approx. 250x250x180 Max. table load: 90 kg Laser power: 40-400 watts (variable adjustment) Laser wavelength (nm): 1070 +/- 5 Tool positions for milling tools: 20 Accessories: Lumex CAD/CAM system Basic and Advanced function for sintering Basic and Advanced function for milling Geometry processing Simulation Generation of process data Transfer of process data Support function for processing and quality 1x Ruwac industrial vacuum cleaner 1x Ruwac wet separator NA35 for potentially explosive materials.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, table load: 750 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 120, number of axes: 4, This 4-axis Matsuura H.PLUS-500 was manufactured in 2008. It features a continuous table with 7 ground pallets, X, Y, and Z-axis travels of 800 mm, and a B-axis with 360° continuous indexing. The machine has a maximum workpiece diameter of Ø850 mm and a maximum workpiece height of 1050 mm. If you are looking to get high-quality machining capabilities, consider the Matsuura H.PLUS-500 horizontal machining centre we have for sale. Contact us for further details. • Axes/Travels: B-axis 360° (continuous/indexed) • Pallet system: 2 pallets; pallet size 500 × 500 mm • Workpiece capacity: max diameter Ø850 mm; max height 1050 mm Additional equipment • Continuous table • 7 ground pallets Ijdsy U Hndopfx Afketh Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, total height: 2,648 mm, total width: 5,500 mm, table load: 100 kg, overall weight: 5,500 kg, spindle speed (max.): 46,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 10, tool weight: 1,500 g, product length (max.): 2,700 mm, number of axes: 3, This 3-axis Matsuura LV-500 was manufactured in 2017. It features a maximum spindle speed of 46,000 rpm and a robust table size of 540 x 350 mm with a maximum table load of 100 kg. The machine is equipped with a tool magazine capacity of 10 tools and rapid traverse rates of 90 m/min. If you are looking to get high-quality machining capabilities, consider the Matsuura LV-500 vertical machining center we have for sale. Contact us for further details. • Control: L-Tech 30iB • Table: • Size: 540 × 350 mm • T-slots: 18 mm (3 slots) • Distance table to spindle nose: 150 – 450 mm • Spindle: • Taper: BT30 BIG-PLUS • Motor: 7.5 / 15 kW • Max torque: 8.86 Nm @ 15,000 rpm • Direct drive • Feed rates: • Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min • Cutting feed: 35,000 mm/min • Minimum increment: 0.0001 mm • ATC (Automatic Tool Changer): • Tool taper: BT30 • Max tool diameter: 46 mm • Max tool length: 150 mm • Tool-to-tool time: 2.2 s • Chip-to-chip time: 5.2 s • Accuracy: • Positioning accuracy: ±0.001 mm • Repeatability: ±0.0005 mm • Power requirements: Iedpfjy Uwv Ejx Afketh • Power supply: AC 200/220V ±10% • Required power: 35 kVA • Frequency: 50/60 Hz • Air pressure: 0.54 – 0.93 MPa • Air consumption: 430 NL/min • Tank capacities: • Coolant: 320 L • Oil cooler: 9.5 L • Oil: 1.8 L • Hydraulic: 25 L • Standard equipment: • Spindle oil cooler • Coolant unit • Chip flush • Linear motor cooler • Scale feedback • Air dryer • Synchronized tapping • Work light • Automatic grease lubrication • MIMS system (Matsuura Intelligent Meister System) Technical Specification Taper Size BT 30

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 760 mm, travel distance Y-axis: 845 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 20,000 rpm, number of axes: 5, This 5-axis Matsuura MAM 72-63 V was manufactured in 2008. It features impressive travels with an X-axis of 760 mm, Y-axis of 845 mm, and Z-axis of 610 mm. The machine includes a maximum workpiece capacity of Ø800 mm × 450 mm height and a tool magazine with 150 positions. If you are looking to get high-quality machining capabilities, consider the Matsuura MAM 72-63 V vertical machining centre we have for sale. Contact us for further details. • Rotary axes: A +110° / -110°; C 360° • Table/work area: • Max workpiece: Ø800 mm × 450 mm height • Table to spindle nose: 120 – 730 mm • Feed rates: • Rapid traverse (X/Y/Z): 50,000 mm/min • Cutting feed (X/Y/Z): 1 – 50,000 mm/min • Accuracy: Minimum increment 0.001 mm • Tooling: Tool magazine with 150 positions Itodpfx Afoyzzq Hekoh • Other: Spindle hours 23,000 h Additional equipment • Twin pallet system • Workpiece probe • Tool probe • High-pressure coolant (50 bar) • Filtration system • Chip conveyor with drum filter

Condition: good (used), Year of construction: 2003, Machining center Manufacturer: Matsuura Type: H Plus 405 PC6 Year of manufacture: 2003 CNC control: Fanuc G-Tech 16i Travel ranges: X/Y/Z: 600 x 600 x 600 mm Itedjltlx Nepfx Afksh Table size: 500 x 500 mm 6-position pallet changer Tool magazine: 120 positions 4th axis Knoll high-pressure system Internal cooling: 70 bar 3626

Condition: good (used), Year of construction: 1998, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total length: 1,150 mm, total width: 510 mm, 3-axis CNC machine (VMC) Matsuura - MC-1000 VG X - Travel: 1020mm Y - Travel: 550mm Z - Travel: 510mm Table Length: 1150mm Table Width: 510mm Feed rate X-Axis:15000mm/min. Feed rate Y-Axis:15000mm/min. Itjdpfjwvhvfex Afkoh Feed rate Z-Axis:15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:30kW Speeds / ranges:15000Rpm ATC / revolver: 30 Chip conveyor: yes Length: 2800mm Width: 2500mm Height: 2800mm Weight: 6800kg

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Iodolz Rvlspfx Afkjth Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1993, 2 pallet changers and 4th axis Year of manufacture: 1993 X-travel: 1,020 mm Y-travel: 560 mm Z-travel: 400 mm Table-to-spindle distance: 550 mm Control: Yasnac M80 Table size: 1,200 x 660 mm 2 pallets: 1 pallet with 2 Chick clamps – 1 pallet with 4th axis Tsudakoma RNCV201 Table load: 600 kg Tool holder: SK 40 Rapid traverse X-Y axes: 25,000 mm/min Rapid traverse Z: 15,000 mm/min Spindle speed: 200–20,000 rpm Motor power: 11/15 kW Tool magazine: 40 Internal coolant supply: 20 bar Coolant tank Timer Scraper conveyor Renishaw probe Spindle cooler Air cooler Electronic handwheel Machine weight: 9 t Required space: approx. 7 m x 4.5 m x 2.85 m Total power requirement: 40 kVA Itjdpfx Afswxbg Askeh

Condition: used, Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 400 kg, total height: 2,640 mm, total length: 5,870 mm, total width: 3,440 mm, overall weight: 11,300 kg, table length: 500 mm, table width: 500 mm, rotational speed (min.): 15,000 rpm, Equipment: documentation/manual, Horizontal machining centre CNC Control Matsuura G-tech 16i Pallet table size 500x500 mm Movement X-Y-Z-Axis 600x600x600 mm Magazin capacity 240 Isdpjy N Awdsfx Afkjth Number of pallets: 6 Table load 400 kg Spindle speed 15000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2017, travel distance X-axis: 435 mm, travel distance Y-axis: 465 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 80 kg, total height: 2,755 mm, total length: 3,360 mm, total width: 3,870 mm, overall weight: 8,500 kg, spindle nose: MAS BBT 40, 5-axis Vertical Machining Centre CNC Control Matsuura G-Tech 31 i Table size ø 130 mm Table load 80 kg Number of pallets 10 max workpiece dia x height 330 x 300 mm Movement X-axis 435 mm Itsdpfx Afjy Ny Akskoh Movement Y-axis 465 mm Movement Z-axis 560 mm C-axis (table rotation) 360° A-axis (table tilt) -125/+10° Spindle speed 50 - 15.000 R/min Spindle taper MAS BBT 40 Spindle motor 7,5/5,5 kW Magazin capacity 90 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 10394, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 21 kVA, controller manufacturer: YASNAC, total height: 3,000 mm, total length: 5,000 mm, total width: 2,400 mm, table width: 380 mm, table length: 750 mm, overall weight: 5,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 8,000 rpm, mount diameter: 40 mm, input voltage: 415 V, input frequency: 50 Hz, input current: 29 A, Equipment: chip conveyor, documentation/manual, MATSUURA MC 510 VGM CNC vertical machining centre - Tool holder: SK 40 - Table with three T-slots - Includes the tool holders currently in the magazine! - The machine is equipped with a tool changer, as well as a transformer and two chip conveyors Attention: The item must be collected on a binding date to be agreed between 24/08 and 27/08/2026. Isdpfx Asy I Tkrefketh FCA D-61352 Bad Homburg – loaded onto truck

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Iodoy H Igrspfx Afketh Main spindle motor: 11 kW Video of machine in operation available

Condition: good (used), Year of construction: 2014, functionality: fully functional, Travel X-axis: 1,050 mm Travel Y-axis: 920 mm Travel Z-axis: 990 mm Distance pallet surface to spindle center: 75 - 995 mm Distance between pallet center and spindle head: 150 - 1,140 mm Pallet size: 630 x 630 mm Max. table load: 1,200 kg Spindle speed: 45 - 15,000 rpm Tool holder: HSK 100 Itjdpfx Afoy Nkphjkoh Tool stations: 60 Max. tool weight: 20 kg

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 600 mm Travel Z-axis: 600 mm Table size: 500 mm x 500 mm MACHINE DETAILS Operating hours: approx. 73,000 h CNC control: Fanuc G-Tech 16i Iedpfxjy Atwuj Afkoth Tool magazine: 120 positions Internal cooling: 70 bar EQUIPMENT 6-position pallet changer 4th axis Knoll high-pressure system Note: The machine has already been dismantled.

Condition: excellent (used), Year of construction: 2015, operating hours: 43,000 h, functionality: fully functional, machine/vehicle number: 19978, travel distance X-axis: 660 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Fanuc, controller model: 30i, workpiece height (max.): 850 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 400 kg, operating hours of spindle: 7,000 h, spindle mount: MK 4, number of spindles: 1, This machine is an excellent production machine. For several reasons, we have to part with this machine earlier than planned, as we need to install a 5-axis machine in its place. Otherwise, we would certainly continue using it for many more years. Itedpfx Afoywgglsksh

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 970312407, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 800 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, table width: 510 mm, table length: 1,150 mm, The milling machine is in really good condition and runs production every day. There is a 5th Nikken round drill on the machine, which works perfectly. There are approximately 90 BT40 tools included. Iodpfsy Exx Asx Afksth Speed range: Max. 10,000 RPM Machine dimensions (L x W x H): 3200 x 2800 x 2497 mm Weight: 6,600 kg Accessories/Special features: • CNC control YASNAC J300M • Screw chip conveyor • CE conformity • 30-station tool changer • Coolant system

Condition: good (used), Year of construction: 1998, Table size: 1150 x 510 mm Itjdpfxoyyq Nie Afksh Tool holder: BT 40 Travel distances: X-axis: 800 mm Y-axis: 510 mm Z-axis: 510 mm Speed range: max. 10,000 rpm Machine dimensions (L x W x H): 3200 x 2800 x 2497 mm Weight: 6,600 kg Accessories / Special features: • CNC control YASNAC J300M (comparable to "SIEMENS") • 30-station tool changer • Screw chip conveyor • Coolant system • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2016, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 19979, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 40 mm, feed length Y-axis: 40 mm, feed length Z-axis: 40 mm, nominal power (apparent): 75 kVA, torque: 191 Nm, controller manufacturer: Fanuc, controller model: G-Tech 31 iB, workpiece length (max.): 850 mm, workpiece width (max.): 850 mm, workpiece height (max.): 450 mm, workpiece diameter (max.): 850 mm, workpiece weight (max.): 500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 90 bar, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, tool length: 350 mm, tool diameter: 80 mm, tool weight: 10,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MX-850 Milling Machine – Year of Manufacture 2016 – Excellent Condition For sale is a reliable and high-performance MX-850 milling machine from 2016. The machine is in good, well-maintained condition and is fully operational. With approximately 14,000 operating hours, the machine has been regularly serviced and professionally used throughout. Particular mention should be made of the spindle, which runs exceptionally smoothly and is almost like new—ensuring precision and high machining quality. The MX-850 stands out for its robust construction, high accuracy, and versatile applications in daily production. It is ideal for a wide range of milling operations and perfectly suited for both single and series production. Equipment & Details: - Model: MX-850 - Year of manufacture: 2016 Itjdpfxey Dd Exe Afkjh - Operating hours: approx. 14,000 h - Condition: good - Spindle: excellent run, nearly as new - Function: perfectly operational, ready for immediate use - Coolant system (Knoll) included - Chip conveyor included - Transformer included Scope of delivery note: The machine is sold without tools, holders, or LANG clamping system – only the machine itself and the above-mentioned peripherals are included. The machine has always been handled with care and regularly maintained. It is currently still in operation and can be inspected by appointment. If you are interested or have further questions, please feel free to contact us.

Condition: used, Year of construction: 2012, x-travel 0760 mm y-travel 845 mm z-travel 760 mm Control 840DI Siemens table-size 500 x 500 mm feed 0- 60 m/min workpiece weight max. 350 kg type of pallet-changer 2 St. milling head speed 12000 U/min Itjdpjywntgefx Afksh numbers of tools in magazin 320 tool taper 63 HSK A- axe (swivel) 30- 120 ° B- axe (turning) 360 ° total power requirement 83 kW weight of the machine ca. 15 t dimensions of the machine ca. 6 x 4 x 2,5 m 5 axes machining center with swivable and turnable table. Coontrol Siemens 840 DI. Machine will be supplied with many spare parts. Machine has cooling through spindle ans dust exhaust.

Condition: used, functionality: fully functional, Tool racks for Matsuura H.Plus300, H.Plus405 Itsdpfx Aoyxtg Usfksh MAM72-63V, HG600, MAM72-3VS, etc. Various versions available: BT40 / SK40 Contact us for details!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Fanuc, controller model: 30i, spindle nose: BT40, number of slots in tool magazine: 51, input voltage: 380 V, type of input current: three-phase, MATSURA HPLUS 405 2007 MODEL PALLET SIZE 500-500 FANUC 30i CONTROL SYSTEM BT40 12000 rpm SPINDLE KNOLL TYPE COOLING SYSTEM NEARLY AROUND 50 SETS OF TOOL HOLDERS ALONG 51 TOOL CAPACITY ATC 600-600-600 X-Y-Z AXIS TRAVEL IN OUR STOCKS WE HAVE: *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! You are welcome to contact us for your further questions CNC World Machine LTD Iodsyrdywspfx Afkjth