Used Matsuura H.plus-300 for sale (4)

Condition: excellent (used), MATSUURA H. PLUS 300 is a Horizontal machining center with high precision, excellent accuracy and reliability. Travels X/Y/Z 500 mm; workpieces Ø 530 mm, h 700 mm; pallets 300×300 mm (10), max workpiece 250 kg, change 7 s. Spindle BT40 50–15,000 rpm, 95.4 Nm, 15/22 kW; feeds 1–50,000 mm/min, rapid 50 m/min; 3×380 V 50 Hz; weight ≈7000 kg; dims 3660×2463×2445 mm. Tool magazine 90 pos., tool change 2 s, chip-to-chip 2.9 s. Coolant 1500 l, chip conveyor, toolholder set, spindle oil cooler. Suited to tight tolerances in automotive, aerospace, medical, watchmaking and mould/die. Dsdpfx Abexyaabe Tecr

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,756 h, functionality: fully functional, machine/vehicle number: 16252, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: FANUC 30i, workpiece weight (max.): 250 kg, TECHNICAL DETAILS Travel X-axis travel: 500 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Work Table Pallet size: 300 x 300 mm Max. workpiece weight: 250 kg Rotary table: 360° x 0.001° Minimum/maximum spindle to table center distance: 120/620 mm Minimum/maximum spindle to table surface distance: 80/580 mm Max. workpiece size: 500 x 500 mm Spindle speeds: 50 - 15,000 rpm Spindle taper: ISO 40 Spindle drive power: 15/7.5 kW Feed rates X/Y/Z: 1 - 50,000 mm/min Rapid traverse: 50 m/min Rapid traverse B-axis: 33.3 rpm MACHINE DETAILS Control: FANUC 30i Total connected load: 38 kVA Weight: 10,000 kg Operating Hours Running time: 15,756 h Control on-time: 116,776 h Dcodpfx Abjxnwy Ij Tsr

Condition: used, _____ Description: Year of manuf. : 2013 Control : Fanuc 30iM Speed : 15000 rpm Movement X/Y/Z : 500/560/500 mm Tool holder : BT40 Spindle: Speed:15.000 rpm Power:15 kW Torque:119 Nm Taper:BT40 NC-Roundtable: B-Axis:0,001° Palletsize:300 x 300 mm Tableloading (max.):250 kg Djdpjwwy Naofx Ab Tscr Workpiecesize (max.):ø530 x 760 mm In general: Toolmagazine:71 stations Rapidtravers in X/Y/Z:60 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure, 70 bar Workpiecemeasurement:Touchprobe, Renishaw OMP60 Toolbreakagecontrol:Mechanical Automation:Palletchanger, 2 stations Further Accessory:Trafo, rinsing pistol

Condition: good (used), Year of construction: 2013, operating hours: 17,904 h, functionality: fully functional, machine/vehicle number: 19261, travel distance X-axis: 500 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 71, Geometry protocol available TECHNICAL DETAILS Control: Fanuc 30iM X travel: 500 mm Y travel: 560 mm Z travel: 500 mm Spindle-to-table distance: 80 - 640 mm Spindle Speed: 15,000 rpm Power: 15 kW Torque: 119 Nm at 1,200 rpm Tool holder: BT40 Spindle bearing inner diameter: 70 mm Spindle speed command: 5-digit direct S command Spindle alignment: electric Tool clamping force: 11.8 kN NC rotary table B-axis: 0.001° Pallet size: 300 x 300 mm Table load (max.): 250 kg Workpiece size (max.): Ø530 x 760 mm Pallet clamping surface: (M12 x P1.75) x 32 Feed rate Rapid traverse speed (X/Y/Z): 60,000 mm/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Jog feed rate (X/Y/Z): 0 – 4,000 mm/min Min. travel increment (X/Y/Z): 0.001 mm Min. travel increment B-axis: 1 degree Tool magazine Number of tool positions: 71 stations Max. tool diameter (with adjacent tools): 90 mm Max. tool diameter (without adjacent tools): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool selection: Fixed address system Tool change arm: W-gripper type Tool-to-tool change time: Dependent on tool weight Tool change time: Chip-to-chip Target value dependent Tool station spacing: 95.25 mm Automatic pallet changer (PC2) Number of pallets: 2 Change method: Rotary table Pallet change time (pallet-to-pallet): 6.5 s Total pallet change time: 7.0 s Pallet clamping force: 41.5 kN Max. pallet weight: 40 kg Dcedpfx Aswm D Irjb Ter MACHINE DETAILS Machine height: 2,683 mm Footprint (not including maintenance area): 2,145 x 3,655 mm Machine weight: 8,300 kg Power supply: 50 kVA On-time: 51,149 h Program run: 30,722 h Machining time: 17,904 h Workpiece counter: 1,389 pieces EQUIPMENT - Chip management with Chip conveyor - Coolant system with paper belt filter and 70 bar high-pressure internal cooling (ICS) - Workpiece measurement with Renishaw OMP60 touch probe - Tactile tool breakage monitoring - 2-station pallet changer - Transformer - Flushing gun