Used Masturn 50 Cnc for sale (39,175)

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Bljdpfx Asxwl Tzok Ejg Machine Status: NOT WORKING: NC does not start

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Bljdpfxjxwl N Aj Ak Eog Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Bedpfx Akjxwlmue Ejlg Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Year of construction: 2011, condition: excellent (used), SÄGE SICA TRS/C/SY/U/CNC. 32-250 , PLANETARY TUBE SAW Central clamping for pipe fixing Application: Cutting and Chanfering of PVC, PE, PP PIPES With chip extraction fan Minimum diameter 32mm Max diameter 250mm Year of construction 2005 Machine locations: Sachal extrusion machines Blodpsyru Eqjfx Ak Eeg D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 The machine is my property.

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 18 m/min, feed rate Y-axis: 18 m/min, feed rate Z-axis: 16 m/min, spindle speed (max.): 8,000 rpm, spindle speed (min.): 1 rpm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 18 m/min, rapid traverse Z-axis: 16 m/min, mount diameter: 120 mm, position of the milling head: pionowa, table length: 800 mm, table width: 320 mm, type of input current: three-phase, total height: 2,300 mm, total length: 2,100 mm, total width: 1,750 mm, rotational speed (max.): 8,000 rpm, rotational speed (min.): 1 rpm, overall weight: 2,600 kg, table load: 300 kg, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, rotational speed infinitely variable, The CNC 500L machining center is a modern and compact CNC milling machine designed for precise machining of metals and engineering plastics. Thanks to its rigid machine structure and linear guideways, it ensures high stability and accuracy even during intensive operation. The efficient spindle with a power of 5.5 / 7.5 kW and speeds up to 8000 rpm guarantees effective cutting performance across a wide range of materials. The machine is equipped with an automatic tool changer (12 positions), significantly increasing productivity and reducing setup time. Its intuitive CNC control system allows for quick programming and easy operation, even when working with complex parts. High positioning accuracy and repeatability of ±0.02 mm make the CNC-500L ideal for both single-piece and batch production. Additional features such as through-spindle coolant, chip evacuation system, chip conveyor, and a fully enclosed housing with LED lighting improve operator comfort and safety. Compact dimensions and the option to expand with a 4th and 5th axis make this machine a versatile solution for modern workshops. Technical Specifications Parameter Value X-axis travel 600 mm Y-axis travel 400 mm Z-axis travel 450 mm Distance from guideway to spindle center 100 – 550 mm Table size 800 × 320 mm T-slots 3 × 16 × 75 mm Spindle speed up to 8000 rpm Spindle power 5.5 / 7.5 kW Bodpfx Aey H Dnrjk Eslg Spindle taper BT40 (Ø120) Linear guideways 30 mm Rapid feed X/Y/Z 18 / 18 / 16 m/min Cutting feed rate 1 – 8000 mm/min Positioning accuracy ±0.02 mm Repeatability ±0.02 mm Tool magazine capacity 12 tools Max. table load 300 kg Total power 15 kVA Dimensions 2100 × 1750 × 2300 mm Weight 2600 kg Power supply three-phase Equipment and Options Automatic tool changer (ATC) – 12 positions Through-spindle coolant system Chip evacuation system and chip conveyor Full enclosure with LED lighting UPS backup power supply for control system Option for 4th and 5th rotary axis This machining center combines precision, performance, and compact design, making it a reliable and efficient solution for a wide range of machining applications.

Condition: good (used), functionality: fully functional, spindle bore: 56 mm, turning diameter: 460 mm, JESSEY 1850 ENC CNC Teach-In Lathe — For Sale Reliable Taiwanese-built teach-in CNC lathe equipped with an Anilam 4200T control. Ideal for both manual and programmed turning operations, well suited for workshops that need the flexibility of conventional turning combined with full CNC capability for repeat work. Key features - Anilam 4200T CNC control with Teach-In mode - Heavy-duty spindle with generous bar capacity - Long bed for shaft and large-component work - Tailstock included Technical specifications CNC control: Anilam 4200T Bsdpfx Akoy Hmilj Eslg Distance between centres (turning length): 1250 mm Swing over bed: 460 mm Max. turning diameter: 460 mm Spindle bore (bar capacity): 56 mm Spindle motor power: 7.5 kW Max. spindle speed: 1800 rpm Tailstock: Yes

Year of construction: 1991, condition: ready for operation (used), A horizontal Höfler CNC gear grinding machine is available. Machining diameter: 650mm, min. workpiece diameter: 30mm, max. gear width: 530mm, module range: 1.5-18, max. helix angle: 40°, table diameter: 490mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 22000kg. Including Rittal cooling unit and ISI extraction system. The machine has been out of operation since 2010. Documentation available. An on-site inspection is possible. Blodpoy Hk Tzjfx Ak Eog

Condition: as good as new (ex-display), Year of construction: 2026, Center height: 181 mm Center distance: 650 mm Maximum grindable workpiece diameter: 360 mm Max. load (overhung): 1000 N / 100 kg Max. load (between centers): 3000 N / 300 kg Z-axis Bljdetqf Sqspfx Ak Ejg Table swivel angle: 10° Table drive hydraulic: 0–4 m/min X-axis Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse positioning—air cushion: 280 mm Infeed drive via DC motor Rapid feed rate: 48 mm/min/Ø Infeed process: Plunge / Longitudinal grinding 4 pre-selectable feed rates: mm/min/Ø 0.01–48 4 pre-selectable infeed increments: mm/ 0.001–0.1 Spark-out during end stop grinding: s 0–99 / 0–99 strokes Jog infeed: mm/Ø 0.001 Grinding spindle headstock—universal, swiveling: degrees 0–180 Grinding wheel (external): D x width x bore mm 500x100x127 or 203.2 Grinding wheel (face, option): D mm 250x32x76.2 Grinding wheel (internal, option): D mm (2–250) Drive power (external, face): kW 5.5 (7.5) Drive power (internal): kW 2.2 Peripheral speed (external): m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Wheel guard width: mm 100 Grinding spindle diameter: mm 60 Internal spindle mount: mm 80 (100) Workpiece headstock: Infinitely variable drive, MK 4: 1/min 30–270/ 50–450 Workpiece spindle lockable Spindle mount: mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swivels on the rotary part: degrees 0–90 Tailstock: Quill mount / quill diameter: mm MK 4/750 Quill stroke mm: 45 Quill force N: 100–800 / 250–1400, adjustable Quill actuation: manual (foot switch) Quill fine adjustment: ±40μm Connections: Total power requirement of the machine: kW 6.5–10 Grinding spindle headstock: kW 5.5 (7.5) Workpiece headstock: kW 0.55 (1.1) Coolant cleaning: kW 0.75–2.2 Guideway lubrication pump: kW 0.1 Hydraulic pump: kW 1.5 Hydraulic tank: liters 80 Pneumatics: bar 6 Similar to Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller/ Fortuna

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Model: JA 500 CNC-C Year of manufacture: 1995 Refurbished in: 2003 Grinding length: 500 mm Grinding width: 200 mm Max. workpiece height: 250 mm Bsdpewp E Rgjfx Ak Ejlg Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Speed: 4,200 rpm Machine weight: approx. 2,500 kg

Condition: new, Year of construction: 2026, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 47 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors 3-jaw hydraulic chuck Blodpfxsf Ey Umj Ak Eeg 8-position turret head soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 700 mm, turning length: 5,500 mm, turning diameter: 1,000 mm, spindle bore: 105 mm, spindle speed (max.): 1,000 rpm, GURUTZPE AT 600 PLUS LATHE WITH GROUND BED, AUTOMATIC TURRET, AND NEW FAGOR 8058 CNC Bljdpfxjyivade Ak Ejg

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Blodofu Nbbspfx Ak Eeg Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Condition: repair required (used), Year of construction: 1990, functionality: not functional, machine/vehicle number: 418.364.077, drilling depth: 800 mm, feed length Z-axis: 1,000 mm, total length: 4,200 mm, total width: 2,100 mm, total height: 2,800 mm, workpiece weight (max.): 500 kg, overall weight: 7,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 7,000 rpm, drill diameter: 25 mm, type of input current: three-phase, number of spindles: 1, feed length W-axis: 120 mm, TBT - Deep hole drilling machine, single spindle, with CNC cross table, "x/y" axes and "W" positioning slide! Control: EST - Error in CPU rack. Machine is not operational. All actuators/hardware were functional until decommissioning. The rack error occurred during the downtime after decommissioning. Power electronics/inverter: Bosch Clamping table and various accessories Blsdpfxoyz Rd Nj Ak Eeg Dismantling preferably by the buyer; machine components (control cabinet, body, oil tank) can be placed onto machinery skates using the existing hall crane, but loading inside the hall is not possible! Dismantling and loading upon agreement. Transport exclusively by the buyer.

Condition: used, Year of construction: 1987, functionality: fully functional, ZINSER Flame Cutting System – CNC 500 – Table 3,000 × 8,000 mm Industrial version | CNC controlled | Immediately available Short description: For sale is a robust Zinser flame cutting system with Zinser CNC 500 control and a large cutting table measuring 3 × 8 m. The machine dates from the 1980s and was operating perfectly up to its professional dismantling. The machine is currently dismantled; therefore, a test run is not possible. Inspection of the system and all components is, of course, possible by appointment. Technical data: - Manufacturer: Zinser - Machine type: Not specified - Year of manufacture: 1980s - Control unit: Zinser CNC 500 - Cutting process: Oxy-fuel / flame cutting - Cutting table: approx. 3,000 × 8,000 mm - Condition: used, dismantled Condition & Classification: - System was in operation and fully functional up to dismantling - Dismantled in an orderly and professional manner - Heavy-duty industrial design - Mechanics, table, and gantry in solid condition - Due to age, not a modern high-speed CNC, but: x very robust x straightforward technology x ideal for refurbishment, modernization, or continued use Scope of delivery: - Cutting table 3 × 8 m - Gantry / carriage Bedpfx Akjyanbbs Eolg - CNC control Zinser CNC 500 - Existing flame cutting components - Sale as inspected Inspection & Collection: - Inspection possible by appointment - No test run possible as the system is dismantled - Loading and transport to be arranged by buyer - Location: Germany

Condition: refurbished (used), Centreless grinding machine GHIRINGHELLI M2150 CNC 4 axes grinding wheel 200x610 CNC 4 axes Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy) Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. Blsdpfxsgmf Rrj Ak Esg The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed through the rectification gap. Grinding wheel width: 200 Grinding wheel diameter: 610 CNC: 4 axes

Condition: excellent (used), Year of construction: 2007, operating hours: 8,000 h, functionality: fully functional, turning length: 750 mm, turning diameter: 330 mm, spindle bore: 41 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, spindle motor power: 11,000 W, quill diameter: 50 mm, quill stroke: 110 mm, turning diameter over bed slide: 435 mm, overall weight: 1,400 kg, center height: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: cycle-controlled WEILER E30X750 CNC lathe with Siemens 810 D control. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Bljdpfx Aksvphv Ts Eog Condition: Good, fully functional Location: Austria (Graz) Inspection: On site or via video call by arrangement Pictures/Video: Additional photos and videos of the machine in operation available upon request. Power-on hours (machine energized): 26,492 h The actual operating hours are significantly lower. Based on experience, spindle run time (actual turning) accounts for approx. 30% to 50% of this (i.e. approx. 8,000 to 13,000 hours). Technical specifications: Working area: Center height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 160 mm Center distance: 750 mm Lathe spindle: Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter at front bearing: 70 mm Max. torque at spindle: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: stepless Feed / rapid traverse Feed drive: Three-phase AC feed motors Feed range (stepless): Longitudinal: 0.001–50 mm/rev (Note: also specified 0–20 mm/rev) Face: 0.001–50 mm/rev Feed force: Longitudinal: 6,000 N Face: 3,000 N Max. rapid traverse speed longitudinal/face: 8 / 4 m/min (Note: also specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 tpi Tailstock / quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1,800 × 1,350 × 1,700 mm Interested? Contact us for further information or to arrange a viewing appointment.

Condition: used, functionality: fully functional, Year of construction: 2008, Slotting Machine JANUS CNC-350 Bledpfx Akeyw Rf Ee Eeg For sale: slotting machine JANUS CNC-350, suitable for precise machining of keyways, splines and internal profiles. The machine features a compact design combined with high rigidity and accuracy. Technical specifications: Dimensions (L/W/H): 2130 x 1400 x 2220 mm Main motor power: 3.75 kW Table diameter: 560 mm Table bore diameter: 75 mm X-axis travel: 432 mm Y-axis travel: 732 mm Rapid feed X/Y: 10 m/min Feed range: 0.001 – 0.5 mm Max. stroke: 350 mm Machine in very good technical condition, ready for operation.

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Bedpfx Asxc Nyvok Eelg Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: new, Year of construction: 2026, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Bledpekqz H Dofx Ak Esg

Condition: used, Year of construction: 2001, saw blade diameter 350 mm Bljdjyvvpmspfx Ak Eeg 190 mm speeds 15 / 30 / 45 / 90 U/min power requirement 1,8 / 2,6 kW kW

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Bledpfx Aeyahv Sjk Eog Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Year of construction: 2000, condition: good (used), Technical specifications Bedpsv Tz I Rsfx Ak Ejlg Capacity: 2100 x 650 mm

Condition: new, pressure: 320bending length: 6050column width: 5100daylight: 650stroke lenght (max.): 350column throat depth: 450weight approx.: 23.1004 axes (Y1, Y2, X, R): Ja alle Achsen über Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Steuerung Esa S630 (2D Grafik Steuerung)motor power: 30Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Blodpfjd Ehh Tsx Ak Eeg

Condition: excellent (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 110-00310, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 2,500 mm, feed length Y-axis: 800 mm, pneumatic connection: 6 bar, compressed air connection: 6 bar, The KSL110-Headbag CNC Rotary Head Sewing System is in excellent condition and has logged approximately 2,000 operating hours. Fields of Application: Demanding safety, functional, and decorative seams. Features: Bledpfx Akeyxnl Sj Eeg - Sewing machine driven on the X axis, template driven on the Y axis - 360° rotary head with alternating double feed for perfect seam results in multi-directional sewing processes - Intermittent feed (feed stops when the needle pierces the material) - Switchable needle feed (on/off) for continuous sewing with maximum seam quality - Sewing head can be pneumatically lifted (75 mm) for direct access to any seam position - Two 26 mm bobbins and hooks - Excellent sewing properties thanks to the vertical hook system - Top thread tension is electrically/pneumatically adjustable via menu with Eltex unit - Broken thread monitoring - Bobbin thread monitoring via stitch counter - Electromagnetic thread trimmer for upper and lower thread - Mobile electric bobbin winder (freely positionable) - The touchscreen control panel provides intuitive operation and stands out with its modern, clear layout. Seam progress can be monitored in real time on the screen. Special Features: - Automatic detection of the workpiece holder/sewing program via hand scanner and barcode ensures additional process safety - Sewing area is protected by light barriers (CE compliant) - Pneumatic presser foot height adjustment - Clamping device for fixing two sewing templates in the working area Technical Data for the KSL110-Headbag CNC Rotary Head Sewing System: - Length and width: 3,495 mm x 4,276 mm - Height: 1,685 mm - Weight: 2,000 kg - Max. sewing area: 2,500 mm x 800 mm - Stitch type: 2-needle/double lockstitch - Max. material thickness: 10 mm - Max. sewing speed: 2,800 stitches per minute - Max. stitch length: 12 mm - Operating voltage: 3P+N+PE / 400 VAC / 50–60 Hz - Power consumption: 16 A / 5 kW - Operating pressure (min. – max.): 6 bar - Year of manufacture: 05/2017 - Operating hours: approx. 2,000 h - Control unit: Touchscreen monitor with computer (Windows) The CNC Rotary Head Sewing System KSL110-Headbag is a powerful industrial sewing system designed for demanding safety, functional, and decorative stitches. Manufactured in 2017, this model is characterized by its robust construction. The machine is housed in a grey and white aluminum cabinet that appears clean and well-maintained, indicating careful use. This advanced CNC sewing system offers a sewing area of 2,500 mm x 800 mm and operates with a 2-needle double lockstitch system. It supports a maximum sewing speed of 2,800 stitches per minute and a maximum stitch length of 12 mm. The sewing head is pneumatically liftable by 75 mm, allowing direct access to any seam position, and features a 360° rotating head with alternating double feed, ensuring perfect seam results in multi-directional sewing processes. It is particularly suitable for demanding and industrial sewing applications that require high precision and reliability.

Year of construction: 2013, condition: ready for operation (used), A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible. Bjdpfx Akoyw Svle Eelg