Used Maho 700S for sale (442)

Condition: ready for operation (used), Year of construction: 1978, machine/vehicle number: 32392, table mounting size: 560 x 240 mm x-axis: 300 mm y-axis: 275 mm z-axis: 200 mm spindle retainer: ISO 40 spindle rotations: 40 - 2000 rpm operating voltage: 380 V total energy requirement: 1,5 kW space needed: 1200 x 1100 x 1700 mm Ncsdpfxod Tfcij Afaor weight: ca. 750 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,500 rpm, controller model: Heidenhain TNC 310, TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 20-4500 rpm MACHINE DETAILS Control: Heidenhain TNC 310 Dimensions & Weight Space requirements: approx. 2.15 x 2.00 x 2.50 m Machine weight: approx. 3 t EQUIPMENT Swivelling rotary table Ncedsywgtxopfx Afaer Documentation

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 CNC Control: Heidenhain TNC 530 with DMG-specific MillPlus IT user interface Spindle taper: SK40 Operating hours: 54,981 h Travel distances: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Ncedpfx Afexxamxjaor Additional equipment: NC rotary table (Nikken) Large NC rotary table Tailstock Handwheel Inspection An inspection under power can be arranged at any time by appointment. Condition: Used condition consistent with age and prior usage Known defects: X-axis ball screw worn / overhaul required Y-axis suspected cable or motor damage Repairs completed: 2017 – Handwheel retrofit kit 2022 – Replacement of chip conveyor auger 2024 – New cylinder/ linear guide for tool magazine 2024 – New screen Further defects cannot be ruled out Important note / exclusion of liability The machine is explicitly sold as defective, without warranty, without guarantee and under exclusion of any liability for material defects. All technical information has been provided to the best of our knowledge but is non-binding. No liability is assumed for completeness, correctness, or up-to-dateness of the information. The sale is made as inspected and any subsequent negotiations are excluded.

Condition: excellent (used), Year of construction: 2010, operating hours: 13,362 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Siemens 810D, total height: 2,758 mm, total length: 3,137 mm, total width: 3,355 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, overall weight: 4,250 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 13,362 h, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture: 2010 - Condition: good, used - Control: Siemens 810D - Table: 1200 x 560 mm - Travels: 1,035 x 560 x 510 mm - Spindle speeds: 20 - 8,000 rpm Njdpfxjyf Hyms Afaecr

Condition: ready for operation (used), Year of construction: 1997, CNC milling machine Deckel Maho DMU 80 T Control: Heidenhain TNC426 Spindle speed: 20-6300 rpm Feed rate X, Y, Z: 20-10000 mm/min Nsdpfjx Tapfex Afajcr Rapid traverse X, Y, Z: 15000 mm/min Work envelope: X: 800 mm, Y: 650 mm, Z: 550 mm Tool holder: SK40 DIN 2079 Draw bolt DIN 69 872 Tool changer: 25 positions Max tool diameter: 160 mm Max tool extension from spindle nose: 315 mm Work table: Dimensions: 1100x600 mm T-slots: 9 x M14 Permissible workpiece weight: 500 kg Transport data: Weight: 5800 kg Dimensions (L x W x H): 3.05 x 2.40 x 2.45 m

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) Nsdpoxcp R Uofx Afaecr - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2004, functionality: fully functional, Universal machining centre Deckel Maho DMU 50 M with Heidenhain TNC 310 CNC control. Swivel-rotary table, SK 40 spindle taper with hydraulic drawbar. In good working condition, can be inspected under power. Nedpfjytpy Eox Afaocr

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm control SLIMline Siemens turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Torque 83 / 57 Nm tool taper SK 40 table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min rapid traverse 30 m/min total power requirement 17 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V Ecoline - only 9.290 Spindle-Hours Nodpfox S Rxnjx Afaecr

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, CNC controller: HEIDENHAIN iTNC530 X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360° (0,001°) A-axis degrees: +10° -110° Nedpfx Afeyv H I Hjajcr Worktable Table dimensions mm: 400x400 Max. workpiece weight kg: 200 Spindle speed rpm: 42.000 Tool holder: HSK-E50 Tool magazine slots: 60 Electronic Handwheel Infrared probe blowing air through spindle center selectable via M-function Signal lamp NC swivel rotary table 3D quickSET 20-position pallet tower storage and transfer station

Condition: good (used), Please read the technical specifications carefully. If the machine is of interest to you as an investment, we kindly ask that you provide full identification, including a correct phone number and email address, when requesting an offer. DECKEL Milling Machine Toolroom Milling Machine DMU 35 M 3 x 2 axes CNC Milling Machine With SIEMENS 810 D – ShopMill software Year of manufacture: 2001 and 2003 (2 units available) Travel distances (X/Y/Z): 350 x 240 x 340 mm Spindle speed, stepless: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Clamping bolt: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55 / 80 Nm max. Universal swivel/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145 / 485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotary axis range: 360 degrees Swivel range: degrees Total power consumption: kVA Weight: approx. 1,750 kg Technical data subject to change! Ncodjxz Rdaopfx Afajr Accessories/Equipment: - Direct measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox stages - Fully enclosed guard cabin with sliding door - Swiveling control panel - Coolant nozzles at the vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine light - Serial RS232C interface, LAN (RJ45) The machine is perfectly suited for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. Its outstanding universal capability is thanks to the additional manually operated rotary/swivel table, which allows 5-sided machining. Condition: Good to very good, from a vocational training center, see photos. Can be inspected under power.

Condition: used, Year of construction: 1979, functionality: fully functional, Infinitely variable feed motor and rapid traverse motor from milling machine MH 800P Njdpfx Aeyyap Sjfajcr

Condition: used, Year of construction: 1975, Universal milling machine MAHO MH800, year approx. 1975 Spindle mount ISO 40 X-800 mm with universal table. Y axis feed not working? Weight approx. 3 t. Machine documentation available. Ncjdpoyvr Eqefx Afajr

Condition: ready for operation (used), Year of construction: 2008, operating hours: 79,500 h, functionality: fully functional, machine/vehicle number: 11710000713, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, controller model: HEIDENHAIN iTNC 530, workpiece weight (max.): 600 kg, The machine spindle was replaced according to DMG in 2022. A measurement protocol for the machine is included! TECHNICAL DETAILS Nedjyvp Dkopfx Afajcr Travel X-axis: 700 mm Travel Y-axis: 700 mm Travel Z-axis: 700 mm Spindle speed: 18,000 rpm Spindle torque: 110 / 84 Nm Spindle power: 34 / 28 kW Tool holder: SK 40 Tool changer: 180 positions Pallet size: 500 x 500 mm Max. workpiece weight: 600 kg Rapid traverse: 60 m/min MACHINE DETAILS Control: HEIDENHAIN iTNC 530 Total connected load: 68 kVA Dimensions & Weight Space requirements: 9.5 x 7.5 x 3.4 m Machine weight: 10.5 t Operating Hours Spindle hours: 79,500 h Power-on hours: 112,000 h EQUIPMENT NC rotary table RS 10 pallet rotary storage, total of 12 pallet stations iTNC operator panel for the loading station ICS 40 bar (production package) Through-spindle air blast BA 4 2/4 hydraulic clamping for worktable and set-up station BLUM laser (prepared) Oil mist separator TS 649 probe Mechanical tool breakage detection SDS (Spindle Diagnostic System) Rinse gun Electronic handwheel Chip conveyor

Year of construction: 2001, condition: used, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 500 mm table clamping surface:: 400 x 300 mm Ncedpfx Afsikbtneaer table load: 50 kg semi-automatic operated: LASERSOFT 3D laser capacity: 100 W total power requirement: 27 kVA weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 3,5 x 2,8 m CNC engraving/texturing/labeling/contouring-laser maschine, approx. 9.000h "machine on", approx. 5.500h "laser on" *

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Direct from toolmaking department: DECKEL MAHO DMU 50 – year of manufacture 2005 – Heidenhain iTNC 530 – 3-axis machine – travels X500 x Y450 x Z400 – SK40 – 8000 rpm – without WW – low operating hours, used only as a standby machine, extremely stable and in top condition, also very well suited as a training machine, minimal space required: 1.70 m wide x 2.00 m deep, for sale only due to lack of space, machining test and geometric measurement welcome. Ex works, free loading. Ncjdpsyxy Rtjfx Afajr

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm Ncjdpeyu Twkjfx Afaer C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Ncedjyuzg Hjpfx Afaor Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: not inspected (used), Year of construction: 2016, operating hours: 21,228 h, machine/vehicle number: 127300000073, travel distance X-axis: 2,100 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,250 mm, overall weight: 46,000 kg, spindle speed (min.): 12,000 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 80 bar, 5-axis CNC universal machining center with controlled B-axis and NC rotary table (C-axis). Large working area approx. 2,100 x 2,100 x 1,250 mm. Equipped with a powerful SK50 spindle (52 kW, 430 Nm, up to 12,000 rpm) and internal coolant supply up to 80 bar. Tool changer with 60/63 positions (chain/wheel magazine, double gripper). Nsdpfjyxmicjx Afaecr Very well equipped with Blum Laser, 3D quickSET, ACC, and MPC. Including chip conveyor, oil mist separator, and coolant system. Control ON: 47,888 h – Operating hours: 21,228 h

Condition: ready for operation (used), Year of construction: 1999, operating hours: 51,147 h, functionality: unexamined, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 880 mm Travel Z-axis: 800 mm MACHINE DETAILS Nsdpfxsyxc Eto Afaecr Control: HEIDENHAIN Operating hours Machine hours: 93,440 h Spindle hours: 51,147 h EQUIPMENT Tool changer Chip conveyor

Condition: ready for operation (used), Year of construction: 2002, operating hours: 41,245 h, functionality: unexamined, machine/vehicle number: 1113000335, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: HEIDENHAIN, Equipment: chip conveyor, TECHNICAL DETAILS X-axis travel: 880 mm Y-axis travel: 630 mm Z-axis travel: 630 mm Number of axes: 4 MACHINE DETAILS Control: HEIDENHAIN Operating hours Machine hours: 74,780 h Spindle hours: 41,245 h EQUIPMENT Chip conveyor Filtration system Ncedpfxoyxc Dcj Afaer

Condition: excellent (used), Year of construction: 1992, 1 pre-owned, very well-maintained universal tool milling machine with 3-axis digital readout, brand HEIDENHAIN, and stepless speed adjustment Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992! Working area Table size: 1250 x 740 mm Travel ranges X-axis: 1000 mm Y-axis (vertical): 600 mm Z-axis (transverse): 750 mm Manual cross traverse of the table: 275 mm Working spindle Tool holder (DIN 2079): ISO 40 Quill stroke of the vertical spindle: 125 mm Nodpfx Aeygctrjfajcr Speeds and feeds Spindle speed range: 32 – 1600 rpm, steplessly adjustable Feed range X + Z axis: 10 – 500 mm/min Rapid traverse X + Z axis: 1.4 m/min Feed range Y axis: 5 – 250 mm/min Rapid traverse Y axis: 0.7 m/min Drive power: 5.5 kW Resolution of linear measuring systems: 0.01 mm Weight and space requirement Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital display, brand HEIDENHAIN • Tool holder ISO 40, DIN 2079 • Universal clamping table (rotatable, tiltable, and swivelable) • Stepless speed adjustment via MITSUBISHI A 700 inverter (converted in 2006 with new control cabinet) • Spindle head with horizontal spindle • Central lubrication • Coolant system • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1993, Table size: 800x400 mm Including accessories, various holders Ncedpfowtdv Aex Afaor

Year of construction: 1986, condition: good (used), CNC milling machine MAHO MH 800 E year of construction 1986 half cabin Ncsdeig E Thjpfx Afaer Technical data: X-axis travel 800 mm travel Y-axis 450 mm travel Z-axis 500 mm spindle mounting ISO 40 spindle speed 63 - 3150 rpm rigid angular table 1200 x 620 mm feeds X, Y and Z 1 - 1500 mm/min rapid traverse X-axis 4000 mm/min rapid traverse Y-axis 2500 mm/min rapid traverse Z-axis 3000 mm/min drive power 5,5 kW weight approx. 4000 kg outer dimensions approx. 2600 x 2600 x 2200 mm with - Philips 432 screen control - rigid angle table - documents available function untested

Condition: repair required (used), Maho MH 900 C without housing Control: CNC 432 (V9) - working range X/Y/Z: 1000mm/500mm/650mm - Rigid angle table: 1150mm x 650mm - Maximum table load: 900 Kg - Spindle mounting: SK50 - Speed: 40 - 1600 rpm - Feed rate: 5 - 2.000mm/min - Rapid traverse: 6 m/min - Space requirement: L-3500mm, W-4185mm, H-2146mm Y-axis is not displayed but moves Ncsdpfxefgg Aao Afaer

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Very nice Deckel Maho FP1 Nodpeywlakefx Afascr From the latest model! Comes from a toolmaking workshop. UNIQUE MACHINE With feed on the Y-axis.