Used Machine Vice 200 Mm for sale (143,712)

Condition: good (used), travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,600 mm, table width: 1,000 mm, table load: 8,000 kg, table length: 3,500 mm, Manufacturer: Ki-Heung Type: KNC 1000 Control: HeidenHain iTNC 530 Year of manufacture: 2004 Specifications Metric US Standard X-axis 3200 mm Y-axis 1200 mm Z-axis 1600 mm Bledowpuilspfx Acyep Table length 3500 mm Table width 1000 mm Table load 8000 Spindle power 37 kW Spindle speed 3000 Rpm Tool holder Sk50 ISO/Bt/Mk Feed X-axis 20000 mm/min. Feed Y-axis 20000 mm/min. Feed Z-axis 20000 mm/min. Milling head auto-index 2.5 x 2.5 ° Dimensions (approximate) Length 8200 mm Width 4200 mm Height 3800 mm Weight 18000 kg Please note: The information on this page has been provided by us to the best of our knowledge and ability, and where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute any representation or contractual terms. We recommend verifying all important details.

Condition: used, Spare part for grinder, angle grinder, lathe grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder -is sold as a spare part carrier -Adjustment device: for grinding machine Bsdpfxjivqmaj Acyjlp -Type: unfortunately without type designation -Details: see photos -Dimensions: 580/400/H500 mm -Weight: 120kg

Year of construction: 2002, condition: good (used), Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Bsdpskvnc Sefx Acyelp Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Bjdpfxerx Rxto Acyjlp Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: used, Bending length: 2000 mm Manufacturer: FASTI Bsdpjtwnlnofx Acyolp

Condition: excellent (used), For sale: professional machine vises designed for operation in demanding production environments. Robust steel construction, precise guides, and a large clamping surface ensure stability and rigidity, even when machining large components. Specifications: • Weight per unit: approx. 120 kg • Large working jaw – width approx. 200 mm • Jaw opening: approx. 310 mm • Strong cast iron–steel construction • Hardened sliding guides • Ideal for large milling machines and CNC machining centers. Condition: used, fully functional, normal signs of operation. //// PRICE LISTED IS PER UNIT //// Blodew R S S Espfx Acyop

Condition: repair required (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X27054, clamping force: 2,000 kN, screw diameter: 62 mm, Used Stork IMM 2000-1450 injection molding machine. The machine still needs to be tested and repaired. Blsdswhlddopfx Acyep

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, Used Stork IMM 12000-19000 injection molding machine. Bledpfxjwhkfye Acyop

Condition: excellent (used), 4 stair clamps clamping height 150-200 mm (28365) T Groove width 12 mm Thread M 10 Bledpfjlnka Ijx Acyop

Condition: good (used), Included in delivery: 01x holder f. slide-through protection, used material color: sendzimir galvanized Manufacturer: SLP leg A: approx. 200 x 140 mm leg B: approx. 200 x 38 mm opening dimension: approx. 52 x 32 mm for rectangular tube: 50 x 30 mm Weight/pc.: 0.930 kg Bedpfsipuggsx Acyslp

Condition: excellent (used), Professional face mill from the renowned brand GARANT (Hoffmann Group), designed for high-performance machining. Overall diameter: 210 mm Mounting bore: 60 mm Equipped with indexable inserts – easy handling, suitable for heavy-duty industrial conditions. In very good condition, the tool is ready for use. An ideal choice for machining centers and industrial milling machines. Bjdpfxow Sav Ue Acyolp

Condition: excellent (used), Stair Tensioner (28366) Clamping height 200 - 250 mm T grooves width 12 mm Clamping screw M 10 4 pieces available Bjdpeln Ulajfx Acyolp Weight 8,5 kg

Year of construction: 2020, condition: new, We offer here a new shelf connector of the manufacturer Nedcon NS for sale. Included in delivery are: 01x SET Spacer NR new length: 200 mm Material colour: sendzimir galvanized consisting of each: 01x spacer NR L=200, sendzimir galvanized 02x hexagon head screw 8.8 M10x25 galvanized 02x Toothed nut, hexagonal 8.8 M10 flange galvanised Bsdpfof S Iq Tsx Acyolp 04x hexagon head screw, M10 galvanized

Condition: excellent (used), For sale: robust mounting plate/machine table with T-slots. Constructed from thick-walled steel, painted blue. Excellent base for installing large components, fixtures, or for measuring and machining applications. • Dimensions: 2570 x 770 x 200 mm • Surface with T-slots Bledpjw Rdtuefx Acysp • Precisely machined top section • Weight: 900 kg • Can be transported or loaded by forklift

Condition: good (used), Kraftspannfutter 200 mm Durchmesser Blodpfxjcr S Euo Acyep

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: orange Manufacturer: Vogelsang Bledpsi Hph Ssfx Acyop Type: NS suitable for frame profile width: approx. 100 mm for shelf distance: approx. 200 mm dim. head plates: 128 x 90 mm profile dim.: C 46 x 23 mm Weight: approx. 1,200 kg | pcs. General information about the article: This article is offered for pick-up only. Any additional transport or shipment of this article is associated with additional costs, which can be requested separately from us. depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data for the shelf connector: Shelf system: SLP The scope of delivery includes: Bjdpeipugrofx Acyolp 01x shelf connector, used Material color: blue Total length: approx. 200 mm head plates: approx. 95 x 41 mm L-profile: approx. 31 x 31 mm

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: blue Manufacturer: Feralco for shelf distance: approx. 200 mm total length: approx. 200 mm profile dim.: approx. 20 x 20 mm head plate: approx. 100 x 40 x 4 mm Drill hole Ø: approx. 9 mm (2 pcs. per side) Weight: approx. 0,41 kg | pcs. Bsdpek Iuhfjfx Acyjlp

Condition: good (used), The scope of delivery includes: 01x U- collision protection corner, used Material color: orange total height: approx. 350 mm total width: approx. 200 mm inside width: approx. 160 mm total depth: approx. 360 mm inside depth: approx. 240 mm leg dimension: approx. 140 x 140 mm foot plate dimension: approx. 340 x 200 x 8 mm material thickness: approx. 6,00 mm Bedpfx Acsk T Au Eoyjlp Drill hole Ø: approx. 16 mm Number of drill holes: 04 pcs. Weight / pc.: approx. 14,850 Kg General information about the article: This article is offered for pickup only. Any further transport or shipment of this item or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Year of construction: 2020, Very well-maintained measuring system from Keyence. Type: XM-M1200 (XM-C1000) with PC XM-1500 Year of manufacture: approx. 2020 Bledpfsxgq Amox Acysp #8385

Condition: ready for operation (used), Year of construction: 2020, X-axis: +/-100mm, measuring range: 600x300x200mm, max. workpiece weight: 25kg, the machine is as good as new, an on-site inspection is possible. Bjdpfsruaaaox Acyslp

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: FI-50-RAY-OF, shaft length: 200 mm, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, working range: 200 mm, overall weight: 46 kg, warranty duration: 36 months, input frequency: 100 Hz, Available immediately! Buy now and benefit! Seize the opportunity and secure the 50 Watt Raycus QB. For further information or an individual offer, please do not hesitate to contact us. Contact us today and find out more about the benefits of this outstanding product. We offer you a brand new 50 watt Raycus fiber laser with German user software and operating instructions. This device is very easy to operate without any programming knowledge and is ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details: Laser power: 50 Watt Raycus Wavelength: 1064 nm Marking field size: 200x200 mm (options: 50, 70, 110, 150, 250, 300 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: simple preview Laser class: 4 Working temperature range: 14-30 ℃ Focusing: manual Max. Component height: approx. 350 mm Connection: 230V Cooling: air-cooled Weight: approx. 50 kg Operating costs: low Service life: over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 200x200 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Monitor holder Foot pedal Safety goggles Bsdpfx Acju Hrf Dsyslp Applications: Perfectly suited for text, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. This laser is ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions.

Condition: new, Year of construction: 2025, ZGR-2140/0,8 with transport wheels Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,5 mm Cooper plate 1,25 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length Blsdpfeckm Hmsx Acyjp max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty The price excludes Vat – it applies only to registered companies with an European Vat Id. In order to receive 0% Vat price, you must send us full company details (full name address with postcode and a Valid European Vat ID)

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Prod-Masz press brakes - your best choice! High-precision folding machine for steel, copper, zinc and aluminum sheets. These press brakes and all common spare parts are available from stock. Folding bench ZGR-2140L/0.8 the maximum working length 2140 mm the max. thickness of the steel sheet for 0.8 mm roller scissors incl. bending beam 15 mm Bending angle 160 degrees Blodpfob Hd Hiox Acysp the weight of the handheld machine is about 165 kilograms the cut with the scissors on the whole working length lifting the top beam in three layers The maximum clear width between the beams is 80 mm Rotary shears + 350 euros Crushfolder + 75 euros Shipping costs please ask Delivery possible every week We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery).

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Bedpsxmt Eqjfx Acyjlp