Used Lux Turn for sale (8,310)

Condition: good (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, total height: 2,400 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, Equipment: documentation/manual, Technical specifications: - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 80 A - Control system: FANUC SERIES 31 i-MODEL A Travel ranges: - X1 / X2 axes: 180 mm each - Y1 axis: ±45 mm - Z1 axis: 704 mm - Z2 axis: 620 mm - E2 axis: 720 mm - Rapid traverse X/Y/Z axes: 30 m/min Spindle 1: - Max. speed: 5,000 rpm - Spindle nose: A6k - Spindle bore: 65 mm - Bore in clamping cylinder: 65 mm - Chuck diameter: 210 mm - Drive power: 24 kW Spindle 2: - Max. speed: 7,000 rpm - Spindle nose: Ø 110 mm - Spindle bore: 42 mm - Bore in clamping cylinder: 42 mm Redpov Uh Ndsfx Adrsw - Chuck diameter: 140 mm - Max. chuck jaw weight: 1.25 kg - Output power: 16.5 kW Tool carrier: - 1x 10-station tool turret - 1x 12-station tool turret - All stations driven (12 stations each) - Max. speed of driven tools: 8,000 rpm Accessories: - Chip conveyor from KNOLL - Tool holders (as shown in the photos, included)

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm Redpfx Adeyaqgyerow - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: excellent (used), Year of construction: 2004, MAZAK QUICK TURN NEXUS 200MS-Y Max. machining diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Rodpfx Aew Du S Aodrsw Machine is equipped with: - CNC control Mazatrol 640T Nexus - KITAGAWA three-jaw chuck BB-208 for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck B-206 for 2nd spindle, diameter 169 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: used, Swiveling aggregate, chain width 10 mm Rsdpevvku Eofx Adrjw Storage location: Nattheim

Condition: used, Year of construction: 2014, machine/vehicle number: S6F143651, FANUC 31iB control system, power 29 kW, main and counter spindle, spindle speed max. 5,000/7,000 rpm, travel distances X/Z = 260/610 mm, 12-position tool changer with powered tools (VDI 40), max. turning diameter/turning length = 320/550 mm, part ejector, operating hours approx. 400 hours. Rjdpfx Aey U R Nxsdrew

Condition: used, Year of construction: 2018, machine/vehicle number: S4E184751, FANUC 18i-TF control system, twin-spindle, travel ranges X/Y/Z = 160/+40/-30/510 mm, 12-position tool turret with driven tools VDI 25, maximum speed 6,000 rpm, chip conveyor, remote control, front-end bar feeder TOP etl 8-50, year of manufacture 2018, serial number 95692, L = 5,000 mm, RITTAL control cabinet, remote control. Rodpfx Aey U R N Eedrjw

Condition: used, Year of construction: 2016, machine/vehicle number: S4E163551, Control system: FANUC Oi-TD, remote control, single spindle, maximum speed 6,300 rpm, power 13 kW, 12-position tool changer with powered tools (VDI 25), chip conveyor, maximum turning length/diameter = 670/220 mm, maximum bore diameter 45 mm, control cabinet: RITTAL, stated B/h = 16,500. Rodpey U R Riofx Adrow

Condition: used, Year of construction: 2011, machine/vehicle number: S4BZ4751, FANUC 18i-TB control, twin spindle, travel ranges X/Y/Z = 160/+40/-30/510 mm, 12-position tool turret with driven tools VDI 25, maximum speed 6,000 rpm, chip conveyor, remote control, front-end bar feeder TOP etl 8-50, year of manufacture 2011, serial number 92230, L = 5,000 mm, control cabinet RITTAL, remote control. Redpoy U R Rpefx Adrsw

Condition: used, Year of construction: 2010, machine/vehicle number: R2EY2851, Control system: GE-FANUC Oi-TC, remote control, single spindle, maximum spindle speed 6,300 rpm, power 13 kW, 12-position tool changer with powered tools (VDI 25), chip conveyor, maximum turning length/diameter = 670/220 mm, maximum bore diameter 45 mm, control cabinet RITTAL, stated B/h = 23,500. Rsdpfjy U R R Asx Adrow

Condition: used, Year of construction: 2021, machine/vehicle number: S4E213351, Control system: FANUC Oi-TF, remote control, single spindle, maximum speed 6,300 rpm, power 13 kW, 12-position tool changer with driven tools (VDI 25), chip conveyor, maximum turning length/diameter = 670/220 mm, maximum bore diameter 45 mm, control cabinet by RITTAL, stated B/h = 6,500. Rodpfxsy U R N So Adrjw

Condition: reconditioned (used), Year of construction: 2009, MAZAK QUICK TURN NEXUS 100-II MSY Max. machining diameter: 280 mm Max. machining length: 400 mm Max. milling speed: 4,500 rpm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm Machine is equipped with: - CNC control: Mazatrol Matrix - SMW collet chuck 173E for main spindle - KITAGAWA 3-jaw chuck B-205 for 2nd spindle - Tool Eye Rsdpjy S A Rijfx Adrsw - C-axis - C-axis counter-spindle, input accuracy 0.0001 - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: excellent (used), Year of construction: 2017, MAZAK QUICK TURN 250MY Max. turning diameter: 380 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar capacity: 80 mm Machine is equipped with: - Mazatrol SmoothG CNC control - KITAGAWA three-jaw chuck BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - automatic parts catcher Redpfx Adjyki Tasrew - interface for bar feeder - signal light (3-color LED) - reinforced coolant pump - chip conveyor - standard MAZAK tool package

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Rjdpfx Adjy S Tm Uersw Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. *

Condition: new, weight max. 1000 kg workpiece diameter Ø 80 - 700 mm table turning speeds 80 - 1600 mm/min. roll diameter Ø 250 x 50 mm voltage 230 V / 50 Hz range L-W-H 500 x 300 x 384 mm Antrieb weight 85.0 kg range L-W-H 500 x 160 x 384 mm Mitläufer Description: - Device for rotating and positioning containers and cylindrical workpieces - Unit constructed of solid steel with polyurethane-coated metal rollers - Stepless speed control with DC drive system - Rotary knob for continuously adjustable rotation speed - Switch for clockwise/counterclockwise rotation - Foot switch for start/stop, - High-frequency protection Rsdpezhcgtjfx Adrsw Scope of delivery: - 1x drive unit with integrated control system - 1x rotating unit

Condition: ready for operation (used), Year of construction: 2012, operating hours: 14,597 h, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: Smart, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2012. This Mazak Quick Turn Smart 200 features a 12-position turret and is equipped with a Hainbuch chuck, enhancing its versatility. It has a bar capacity of 65 mm, making it suitable for various turning applications. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 200 machine we have for sale. Contact us for further details. • Supply Voltage: 3 Phase, 400 V, 50 Hz • Control Circuit Voltage: AC100 V / DC24 V • Main Breaker Interrupting Capacity: 20 kA • Supply Voltage (Ue): 400 V, 3~ • Rated Current (Ie): 3.5 A • Frequency: 50 Hz • Weight Barfeeder: 500 kg • Breaking Capacity (Icn): 5 kA • Control: Mazatrol Smart • Turret: 12-Position Rjdezhbqkspfx Adrow • Bar Capacity: 65 mm • Hainbuch Chuck (Standard Chuck Also Included) • Optional, not included: IEMCA KID 80 Bar Feeder (2012) Technical Specification Counter Spindle No Driven Tools No

Condition: refurbished (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, Fully equipped machine IMECA BOSS 32 L edger Turning tool holder included 6 fully overhauled motorized tools New tool drive gearbox. New Y-axis, motor, and ball screw. Clamping and guiding device provided with the machine Rodpfx Adezic Rujrew New edger channel 380 V / 220 V transformer included

Condition: used, Schaublin 102 VM We have a total of 5 units in stock. Rodpfozicwbjx Adrjw The price is 2000 Euros per unit. See photo.

Condition: used, Needs some attention and a new fan belt, otherwise it's in good condition. Accessories are shown in the photo. Rodpfx Aezicgiedrew

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 196 mm, turning diameter over cross slide: 130 mm, spindle speed (min.): 6,000 rpm, bar diameter (max.): 36 mm, overall weight: 1,900 kg, Equipment: documentation/manual, Yamazaki Mazak QT-6T CNC Turning Center – Excellent Condition We offer for sale a well-maintained Yamazaki Mazak QT-6T CNC Turning Center, manufactured in Japan and kept in excellent mechanical and operational condition. The machine is currently under power, in production, and available for inspection and testing upon appointment. Machine Information - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - CNC Control: Mazatrol - Configuration: 2-Axis CNC Turning Center (X / Z) - Machine Weight: Approx. 1,900 kg Main Features - 6" Chuck - Collet Chuck - Complete Set of Collets Included - Bar Capacity up to 36 mm - 8-Station Turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant System - Fully Operational Included Equipment - Fedek Bar Feeder - Bar Feeder Length: 1.5 m - Pneumatic Bar Pushing System - 6" Chuck - Collet Chuck - Complete Set of Collets - Full Set of Tool Holders - Original Manuals and Documentation - Various Accessories Additional Equipment Included The machine is supplied with the complete set of spindle protection plastic tubes (bar guide tubes), allowing safe operation with bar stock and minimizing vibration, noise, and bar whipping during spindle rotation. This contributes significantly to machining stability, surface finish quality, and spindle protection when running long bars. Rodpfx Ajzal Rasdrsw Technical Specifications - Maximum Turning Diameter: Approx. 130 mm - Maximum Turning Length: Approx. 196 mm - Spindle Bore: Approx. 45 mm - Maximum Spindle Speed: Up to 7,000 rpm - Bar Capacity: 32–36 mm - X-Axis Travel: Approx. 80 mm - Z-Axis Travel: Approx. 200 mm - Rapid Traverse X/Z: Up to 30 m/min Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ Machine under power ✔ Ready for immediate production ✔ Inspection and test run possible ✔ All manuals and documentation available Additional Information This machine is offered as a complete production package and is ideal for precision machining of bar stock, small and medium batch production, and high-accuracy turning applications. The machine comes with extensive tooling, collets, holders, automatic tool setting, automatic parts catcher, bar feeder, and spindle guide tube system, allowing immediate integration into production with minimal additional investment. Loading assistance is available. Videos of the machine running can be provided upon request.

Condition: used, Year of construction: 2002, feed length Y-axis: 1,200 mm, feed length Z-axis: 900 mm, Make: Daewoo-Doosan Model: PUMA V-1200M Category: Vertical CNC Turning Center Year of manufacture: 2002 CNC Control: FANUC Series 18-T Machine weight: 23,000 kg Machine dimensions Length: 8,500 mm Width: 4,900 mm Height: 5,650 mm Redpfx Adsziavnsrew Capacities Maximum turning diameter: Ø 1,600 mm Maximum machining diameter: Ø 1,600 mm Maximum machining height: 1,200 mm Maximum load on spindle: 6,000 kg Main spindle Chuck diameter: Ø 1,200 mm Spindle speed: 2 ÷ 320 rpm Number of ranges: 2 Motor power: 37/45 kW (continuous / 30 min) Powered spindle (RAM) Tool holder: ISO-50 Speed: 15 ÷ 1,500 rpm RAM section: 240 × 240 mm Travels X-axis: 1,200 mm Z-axis: 900 mm C-axis: 360° (minimum resolution 0.001°) Feed rates Rapid traverse X/Z axes: 10,000 mm/min Working feed rate X/Z: 3,000 mm/min Turret Number of stations: 16 Tool holders: BT-50 Drawbar type: 403 P50T-I Maximum tool diameter: Ø 400 mm Maximum tool length: 450 mm Maximum tool weight: 50 kg Maximum tool weight in the magazine: 600 kg Accessories Chip conveyor Coolant tank with washing pumps Spindle line cooler Powered and fixed tool holders Manuals, electrical diagrams, and CE Declaration.

Condition: ready for operation (used), Year of construction: 1997, turning length: 410 mm, turning diameter: 516 mm, spindle speed (max.): 4,500 rpm, bar diameter (max.): 51 mm, CNC MSC 803 10-position turret Maximum spindle speed: 4500 RPM Spindle bore: 51 mm Maximum diameter swing: 516 mm Set of collets and chuck Rjdpjzh Uu Ajfx Adrsw

Condition: ready for operation (used), Manufacturer: nord Redpswqc Skefx Adrsw type: sk 0182NB/VF IEC80/26 DEX 80K/4K/2G electrical data: 380V, 50Hz, 0,55KW, 1.38A, 1410 rpm enclosure dimensions: 1250 x 1130 x 290 mm weight: 120 kg

Condition: good (used), Year of construction: 2008, XYZ Compact Turn 52 CNC lathe with barfeeder Year: 2008 Technical details: Bar Capacity 52mm Chuck Size 150mm (6") Control Siemens 810D Shopmill Distance Between Centres 280mm Maximum Cutting Diameter 220mm Maximum Cutting Length 280mm Rapid Feedrates 20m/minute Spindle Motor Power 20Hp Spindle Nose A2-5 Spindle Speed 5000rpm Swing diameter 400mm Swing Over Carriage 400mm Tailstock Quill Diameter 60mm Tailstock Quill Stroke 90mm Tailstock Taper MT4 Tool Size 20 x 20mm Tooling Configuration VDI 30 Turret Positions 12 X axis Travel 185mm Z axis Travel 325mm Machine Dimensions 2531 x 1778 x 1720mm Machine Weight 2590kg Accessories/options: - LNS servo barloader - Foot pedal for chuck operations - Parts catcher - Renishaw tool setter - Tailstock - VDI 30 tool holders - Swarf conveyor - Documentations Rsdjzg Intspfx Adrjw Under power in our warehouse, possible to test it anytime!

Condition: good (used), Year of construction: 2011, Maximum machining diameter 42mm, maximum machining length 175mm, spindle power 7.5/5.5Kw , Rsdpfx Adjzg Egmorjw spindle speed 5,000rpm, 8 station turret, milling speed 5,000rpm, Fanuc OI-TD control, 3 jaw chuck, parts catcher.

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, Rjdpfx Aszg Efisdrsw maximum cutting diameter 457mm, 762mm between centres, 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, +/- 50mm Y axis, 76mm Bar capacity, 22.4kW Spindle Motor, 3400rpm spindle, 24m/minute rapid feedrate, 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,