Used Biolux Ng Microscope for sale (8,159)

Condition: good (used), Foliant Mercury 760 NG Laminating Machine The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing houses. Very good condition, ready to work. Year of production 2019. Description: – feeding from a high stack, head on a servo motor (elevator) – automatic separator – pneumatic roller pressure – sheet straightening module – built-in Becker compressor – jogger on sheet collection – gilding module, rewinder Feeding system: servo motor head Max sheet size: 76×110 cm Min sheet size: 25×32 cm Max. capacity 1300 sheets B1 / h Max lamination speed: 20 m / min Temperature: 80 – 140°C Heating time 8 min Installed power: 6000 W -Power supply 380V Weight 810 kg Hjdpey Sd Trjfx Agmenn

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5B0S000433, No minimum price – guaranteed sale to the highest bidder! The new price of the microscope was approximately €100,000! Further technical details can be found in the attached data sheet! TECHNICAL DETAILS Maximum magnification: x1000 Camera VHX-7100 Sensor size: 1/1.7 inch Sensor type: 12.22-megapixel CMOS sensor Total pixels (H x V): 4,168 × 3,062 Virtual pixels (H x V): 4,024 × 3,036 High speed (H x V): 2,048 × 1,536 High resolution, 4K mode OFF (H x V): 2,880 × 2,160 High resolution, 4K mode ON (H x V): 4,000 × 3,000 High resolution (H x V): 12,000 × 9,000 Electronic shutter speed: 1/30, 1/60, 1/120, 1/250, 1/500, 1/1,000, 1/2,000, 1/5,000, 1/9,000, 1/19,000 Supercharge shutter speed: 0.01-s steps from 0.03 to 4 s LCD monitor Size: 27-inch color LCD Screen size (H x V): 596.16 × 335.34 mm Pixel pitch (H x V): 0.15525 × 0.15525 mm Number of pixels (H x V): 3,840 × 2,160 Display colors: approx. 1.07 billion Viewing angle: ±89° horizontal, ±89° vertical VHX-S770E stand Travel range of the XY stage: ±50 mm Hnsdpfx Agezb Eixomon Size of the XYθ stage (surface): 233 × 185 mm Speed of the motorized XY stage max.: 20 mm/s Travel range of the Z stage: 49 mm Load capacity: 5 kg Weight: 25.3 kg MACHINE DETAILS Connection: Digital Dimensions & Weight Dimensions without protruding parts (W x H x D): 635 x 450 x 132 mm Weight of the control unit: 10.8 kg EQUIPMENT KEYENCE VHX-X1 microscope unit Control console VHX-AX1D Processing unit OP-88885 Camera unit VHX-7100 Objective lens VH-Z00T High-performance objective lens VH-Z100 Motorized revolving head Motorized precision stand VHX-S770E Large motorized XY stage Software module VHX-H6M Ring light and illumination adapter OP-88164 3D profile measurement Manufacturer documentation Original accessories

Condition: excellent (used), Shimadzu Type: Prestige-21 / with AIM-8800 Infrared Microscope Shimadzu IR Prestige-21 Infrared Spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the fields of research and development. It is an excellent addition to the existing FTIR series, which covers, among other things, the standard laboratory area. AIM-8800 Specifications Optics: 15x Cassegrain objective lens 15x Cassegrain condenser mirror with inlet for purging MCT detector: with liquid nitrogen monitoring system Hnsdpfx Agszdyyijmjn Wavelength range: Type 1 - 5000 - 720 cm-1 Type 2 - 5000 - 650 cm-1 Electrically activated aperture XY Θ directional drive. Adjustment of the XY directional increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum adjustment value: 3µm Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30 mm Resolution: 1 µm spacing Sample thickness: Reflection mode - ≤ 40 mm Transmission mode - ≤ 10 mm Operation via the main unit's keyboard Selection of the measurement mode / XY stage operation (speed control in 4 steps) / manual focusing / illumination control (Optional) Control via PC Selection of the measurement mode / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture adjustment / aperture preview / measurement position and recording of the aperture setting (10 sample positions, 2 background positions) Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410mm x D540 mm x H520 mm x 36kg Condition: used Scope of supply: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), ZEISS Type: DSM 962 The digitized scanning electron microscope DSM 962 is a device equipped with an integrated 4 MB image memory, a 40 MB hard drive for internal image storage, as well as drives for external storage of data and images. This allows for quick and easy acquisition of information about the composition and morphology of specimen surfaces, even down to the sub-micrometer range. With a magnification range of 5x to 300,000x, both the examination of macrostructures and microstructures is possible. Through special attachments, the range of applications can be significantly expanded, enabling, for example, analytical investigations in micro-areas of the surface. Hnedpezdthysfx Agmsn The device can be operated using conventional switches or via the keyboard and mouse (optional). The electron optics and vacuum control are conventional. The functions of the image memory are operated using the keyboard or mouse (optional). A separate information display is located centrally on the control panel for displaying the menus. This user manual is intended to serve as a guide for the user to achieve the best possible results with the device. The explanations have been kept as simple as possible in order to provide even a less experienced user with the necessary knowledge. Magnification range: 20x to 300,000x at a 7 mm working distance Steps in a sequence of 1-2-3-5-10 Minimum magnification: 5x at a 50 mm working distance Resolution: 4 nm - guaranteed with tungsten filament at 30 kV, 6 mm working distance, untilted specimen 25 nm - guaranteed with tungsten filament at 1 kV, 6 mm working distance, untilted specimen 3.5 nm - guaranteed with optimized LaB6 filament at 30 kV, 6 mm working distance, untilted specimen Scope of supply: (DSM 962 with accessories as shown) Condition: used (Changes and errors in the technical data are subject to change!) Please inquire about transport options before purchasing. We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Microscope Magnifying glass Make Hartmann ACCU type Lux 20 times magnification Hodpfxjd Iacws Agmenn in wooden box with instruction manual

Condition: used, Bosch Rexroth Pressure Reducing Valve NG 25 DR20-6-4X/315YM Manufacturer: Bosch Rexroth Condition: Used Type: Pressure reducing valve Model: DR20-6-4X/315YM Nominal size: NG 25 Series: 4X Design: Direct-acting pressure reducing valve Maximum operating pressure: 315 bar Hodpfx Aezcw T Sogmonn Mounting type: Subplate mounting Hydraulic connection pattern: ISO 4401 NG 25 Actuation: Adjustable via setting screw Application area: Hydraulic systems, presses, machine tools, and industrial hydraulics Function: Reduction and maintenance of a set secondary pressure

Condition: ready for operation (used), X-axis: 300mm, y-axis: 200mm, z-axis: 200mm, working distance: 77mm, max. workpiece height: 200mm, max. workpiece weight: 20kg, length: 730mm, width: 900mm, height: 950mm, weight: 125kg, optical length measurement error (2D): 2.9 + L/100µm (L in mm) at 20°C ±1K, tactile length measurement error (MM2/TP20): 4 + L/75µm (L in mm), optical lens: 1.5x, screen magnification: 47-80x, field of view: 4.5x3.5mm, camera: 1.3 megapixel CMOS with autofocus. Equipment: 3-axis CNC control via servo drives and joystick, IK 5000 measuring software, IK 5000 measuring computer for 2D and 3D geometric measurements, integrated CAD module for DXF and IGES data, automatic fit routine for comparison of freeform contours, scaling routine, tolerance inspection according to DIN ISO 1101, data export to Microsoft Office or to databases/SPC/QS systems via ODBC interface, report generator for user-defined measuring tasks, storage of executed actions as measuring macros. An on-site inspection is possible. Hsdpfx Agozc Rdwjmsnn

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer Complete with MSC20 Encoded Stage Controller RL532C50 HPNIR Laser Source A-9803-0625 CCD 1. The device doesn't come with a software license or computer. We are selling the device as it is. 2. There is a HPNIR785 Renishaw Laser Source installed on the device. Unfortunately we are a surplus seller and do not possess the expertise to test and run this machine for diagnostics. Our intentions are to sell the device for parts and leave a buyer recondition to their required standards. Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel. Hnsdjym Dt Hepfx Agmen

Condition: used, mileage: 20,760 km, power: 141 kW (191.71 HP), first registration: 06/1982, fuel type: diesel, empty load weight: 8,750 kg, maximum load weight: 3,250 kg, overall weight: 12,000 kg, tire size: 10R22.5, axle configuration: 4x4, wheelbase: 3,600 mm, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 6, Equipment: additional headlights, all wheel drive, cable winch, differential lock, trailer coupling, Vehicle location: Bovenden, heated mirrors, switch 6, power take-off, differential lock, working lights, rotating beacon, storage box, cable winch, leaf suspension Wheelbase: 3600 mm Body: Ziegler RW-2 fire department rescue vehicle with Rotzler cable winch type 5000H/2-96F & generator (rated power 20kVA) RQV controller with ZDA, speed increase for engine output! Hnjdpsvhh Sfofx Agmsn Body length approx. 5000mm! The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 210,000 km, power: 206 kW (280.08 HP), first registration: 04/1987, fuel type: diesel, empty load weight: 12,800 kg, maximum load weight: 11,200 kg, overall weight: 24,000 kg, tire size: 12R22.5, axle configuration: 6x4, wheelbase: 3,200 mm, color: green, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 2, loading space length: 4,800 mm, loading space width: 2,300 mm, loading space height: 1,100 mm, Equipment: cabin, differential lock, hydraulics, power assisted steering, Vehicle location: Bovenden, steel body, 1 air-suspended seat, 16-speed manual gearbox, PTO, differential lock. Wheelbase: 3200 mm. Body: MEILLER steel tipper approx. 10 m³. The exact mileage cannot be determined because the speedometer cable is broken. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Hnedpfexyxizox Agmjn

Condition: used, mileage: 35,510 km, power: 141 kW (191.71 HP), first registration: 02/1976, fuel type: diesel, empty load weight: 9,325 kg, maximum load weight: 6,675 kg, overall weight: 16,000 kg, tire size: 12.00R20, axle configuration: 4x4, wheelbase: 3,800 mm, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 2,500 mm, total width: 3,300 mm, Equipment: additional headlights, all wheel drive, differential lock, trailer coupling, Vehicle location: Bovenden, double bench seat, switch 6, auxiliary drive, differential lock, work lights, rotating beacon, storage box, leaf suspension Wheelbase: 3800 mm Superstructure: Metz TLF 24/50 water tender with 5000l water tank, centrifugal fire pump, 500l foam tank & pneumatic foam water cannon Sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hjdpsvhiifjfx Agmonn - .

Condition: used, mileage: 181,500 km, power: 206 kW (280.08 HP), first registration: 02/1989, fuel type: diesel, empty load weight: 9,630 kg, maximum load weight: 7,370 kg, overall weight: 17,000 kg, tire size: 13R22.5, axle configuration: 4x4, wheelbase: 4,500 mm, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, Vehicle location: Bovenden, company equipment, 1x air-suspended seat, rear window, air conditioning, sun visor, 16-speed manual gearbox, PTO, differential lock, auxiliary headlights, revolving beacon, leaf suspension, winter service equipment, underrun protection, side aluminum underrun guard. Hsdpfx Aevhmmhogmjnn Wheelbase: 4500 mm. Body length up to 6m possible! Suitable Schmidt snow plow and Epoke salt spreader available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: used, mileage: 217,605 km, power: 206 kW (280.08 HP), first registration: 12/1987, fuel type: diesel, empty load weight: 9,710 kg, maximum load weight: 7,290 kg, overall weight: 17,000 kg, tire size: 13R22.5, axle configuration: 4x4, wheelbase: 4,500 mm, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, Vehicle location: Bovenden, main facility, 1x air suspension seat, rear window, PTO, differential lock, high-beam headlights, rotating beacon, leaf suspension, winter service equipment, underrun protection, side aluminum underrun protection, roof hatch. Wheelbase: 4,500 mm. ZF mechanical manual transmission. Body length up to 6m possible! Suitable Epoke snow plough -9370- and Epoke salt spreader -9452- available at extra cost! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Hsdpfoy Hrv Rex Agmenn

Year of construction: 2016, condition: ready for operation (used), A custom-built Nordgreif mat gripper for reinforcing steel is available. Load capacity: 6000kg, gripping width range: 2100mm-2520mm, max. opening width: approx. 2660mm, length: 5080mm, mat hooks: 2x3, mat length range: 5100mm-8100mm, mat width range: 2100mm-2520mm, mat height range: 150mm-800mm. Documentation available. An on-site inspection is possible. Hnedpfszcflvsx Agmen

Condition: excellent (used), Wild Heerbrugg M3 – professional stereo microscope Hsdszagapopfx Agmjnn I am offering a high-quality stereo microscope from the renowned Swiss company Wild Heerbrugg. This device is suitable for use in laboratories, quality control, electronics, jewelry making, watchmaking, and precision work. Technical specifications: • Manufacturer: Wild Heerbrugg • Model: M3 • Country of manufacture: Switzerland • Binocular head • Focus adjustment • Sturdy laboratory stand • High-quality optics Condition: Used item. Visually in good condition, with normal signs of use. Sold exactly as shown in the photos.

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank Hodpfsu Icp Ajx Agmenn i.D. *

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 2,000 mm, type of input current: AC, total width: 1,000 mm, total length: 800 mm, overall weight: 800 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 400 Multisensor Measuring Device equipped with camera and Renishaw touch probe system Fully functional with factory acceptance before delivery! Comprehensive maintenance history Measuring range: 400x200x200 mm Maximum workpiece weight (glass plate): 15 kg Instrument weight: 800 kg Control cabinet weight: 90 kg External dimensions: 800x1000x2000 mm Maximum traverse speed: 150 mm/s Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measurement length in mm) Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt 2025. Includes the latest software update for Windows 10 (Windows 11 upgrade and OptiCheck3D 2025 available as options), including free lifetime software hotline and user support. Optional: Delivery via factory service or forwarding agent, worldwide. Optional: On-site commissioning & calibration Optional: Training service Online and on-site demos available with customer parts, application consulting by accredited Profitech metrology laboratories during project planning. Available complete service: – Delivery, installation, commissioning, acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and education programs also bookable as online courses. Creation of your measuring programs for direct operation with the device is also possible. Rental, lease-purchase, or financing possible directly via Profitech without any financial institution. The measuring device can be individually configured to customer requirements (within the EU). Hnsdpfx Agew Slafomon Reference number: 01814-1-ms400 (Please always include this with inquiries)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, workpiece weight (max.): 100 kg, total width: 320 mm, total length: 640 mm, total height: 540 mm, Axioplan 2 Imaging, a universal all-in-one solution adaptable to any application. A flexible, future-oriented microscope system, controllable via computer or manually, capable of digital image capture and storage, and able to communicate with other systems – truly a digital microscope from A to Z. Eight filter positions with a full 25 mm field of view, easily accessible in a compact reflector turret: This means top performance without compromise and offers space for a wide range of filter combinations, Optovar modules, multi-channel fluorescence, and a DIC analyzer. Hnodpfjytr Acex Agmsn Includes attachment for the AXIOPLAN photomicroscope.

Year of construction: 2012, operating hours: 500 h, condition: used, machine/vehicle number: AT107, Technical Specifications & Performance DataThis UHT system with integrated homogenizer is engineered for continuous ultra-high temperature processing in beverage production and industrial packaging environments. The unit belongs to the 6.3T capacity class and is suitable for aseptic downstream filling as part of a used bottling line or as a second hand standalone processing module. Designed to reach high sterilization temperatures, it ensures product safety and extended ambient shelf life when combined with aseptic handling.Process type: Continuous indirect UHT treatment with integrated homogenizationThroughput class: 6.3TMaximum process temperature: Up to 144°CConfiguration: UHT module plus homogenizerOperation: Continuous processing for high uptimeBuild: Industrial, hygienic design suitable for beverage and dairy applicationsAdvanced Automation & Control SystemsThe system is prepared for modern automation architectures, supporting PLC/HMI-based operation with recipe-driven control and monitored process parameters. Operator guidance and safety interlocks help maintain stable thermal profiles and consistent homogenization outcomes.Automated temperature control for heating, holding, and cooling sectionsRecipe-based setpoints for repeatable product changesOperator HMI for real-time status, alarms, and trend visibilityInterlocks for safe operation and process integrityProduction Line Integration CapabilitiesThis processing unit integrates upstream with raw product reception and downstream with aseptic tanks, fillers, and packaging machinery. It can operate as a standalone skid or be embedded within a broader beverage production line.Inline or standalone operation for flexible plant layoutsCompatible with aseptic tanks and filling machinesSupports multi-product workflows (e.g., milk and juice) with recipe controlDesigned for efficient changeover between products within the same categoryMachine Condition & Maintenance HistoryThe equipment is offered as a second hand unit in as-is condition with no missing parts. Having accumulated only 150 operational hours, the machine is in excellent working order. The new model generation ensures contemporary design principles, while the as-is sale allows rapid deployment for plants seeking proven technology at competitive lead times.Condition: As-is (Only 150 operating hours)Completeness: No missing partsModel generation: New modelOperational Performance & VersatilityCombining UHT treatment with an integrated homogenizer delivers both microbial stability and controlled product texture. This makes the system ideal for beverage production workflows requiring long shelf life with preserved sensory attributes.Suitable for milk and juice process applicationsHomogenization for stable emulsions and improved mouthfeelHigh thermal capability up to 144°C for robust sterilization marginsConsistent process quality for industrial packaging operations Hedpfx Ajy Uc T Nogmonn

Condition: excellent (used), For sale: precision toolmakers' microscope from renowned Japanese manufacturer Mitutoyo, model TM-101 (Code No. 176-901). This device is designed for inspection of dimensions, shapes, profiles, surfaces, and contours in tool rooms, measurement laboratories, and quality control departments. Manufacturer: Mitutoyo Mfg. Co. Ltd. Japan Type: TM-101 Mitutoyo digital readouts on X and Y axes with ABS and INC functions, preset, and data output Measuring cross-table with rotation and adjustment Lighting functions: Surface, Contour, Main Power supply: AC 220V, 50–60 Hz, 8 VA Robust, stable industrial construction Very good condition, complete device, technically fully functional and ready for operation. Ideal for measuring cutting tools, milling cutters, drills, inserts, inspection of precision components, as well as contour, thread, and geometry measurements of workpieces. Hjdow R E Hispfx Agmjnn

Condition: new, Year of construction: 2025, functionality: fully functional, New, innovative DCS system with 5 pre-set cutting speeds for the most common materials. In addition, the belt speed can be manually adjusted continuously. A load indicator signals the motor load, in order to minimize motor damage, potential saw blade breakage, and cutting errors caused by excessive pressure. The reversed rotation direction of the saw blade (NG system) enables a cutting speed up to 40% faster than with traditional machines. The patented slip clutch prevents over-tensioning of the saw blade. A cutting line laser facilitates accurate positioning of the material. Despite a large cutting area of 110x85 mm, the machine is very light at 17 kg. The saw frame and base plate are made of aluminum die-cast and thus enable an enormous weight reduction. The vice cast into the base plate ensures maximum precision. A miter adjustment of 0 – 45° and adjustable belt guides enable versatile applications and accurate cuts. FEMI – quality for professionals and demanding DIY enthusiasts. Technical data: Motor: 230 V, 50 Hz, 0.95 kW Saw blade dimensions: 1330x13x0.65 mm Weight: 17 kg Saw blade speed: continuously adjustable, 30 – 80 m/min Miter angle: 0 – 45° Cutting area in mm: 0° 110x85 105 100x100 Hsdpfx Agjy Tnctjmsnn 45° 75x37 74 72x72 Scope of delivery: 1 saw blade 1330x13x0.65 mm, 14 teeth/inch 1 length stop, 500 mm Operating manual and CE declaration of conformity

Condition: new, Year of construction: 2025, functionality: fully functional, New, innovative DCS system with 5 pre-set cutting speeds for the most common materials. In addition, the belt speed can be manually adjusted continuously. A load indicator signals the motor load, in order to minimize motor damage, potential saw blade breakage, and cutting errors caused by excessive pressure. The reversed rotation direction of the saw blade (NG system) enables a cutting speed up to 40% faster than with traditional machines. The patented slip clutch prevents over-tensioning of the saw blade. A cutting line laser facilitates accurate positioning of the material. Despite a large cutting area of 110x85 mm, the machine is very light at 17 kg. The saw frame and base plate are made of aluminum die-cast and thus enable an enormous weight reduction. The vice cast into the base plate ensures maximum precision. A miter adjustment of 0 – 45° and adjustable belt guides enable versatile applications and accurate cuts. FEMI – quality for professionals and demanding DIY enthusiasts. Technical data: Motor: 230 V, 50 Hz, 0.95 kW Saw blade dimensions: 1330x13x0.65 mm Weight: 17 kg Saw blade speed: continuously adjustable, 30 – 80 m/min Miter angle: 0 – 45° Cutting area in mm: 0° 110x85 105 100x100 45° 75x37 74 72x72 Scope of delivery: 1 saw blade 1330x13x0.65 mm, 14 teeth/inch 1 length stop, 500 mm Hodpfx Aoy Tk N Aegmenn Operating manual and CE declaration of conformity

Condition: used, functionality: unexamined, machine/vehicle number: SX-50, Used Cameca SX-50 Electron Microprobe Cameca SX-50 electron microprobe is used (Electron Probe MicroAlalyses). it has a 6” inch stage, 3 WDX Spectrometers with several Cristals LiF, PET, TAP, ODPb, PC1, PC2, PC3. Electron probe microanalysis (EPMA) are generally considered micro-analytical techniques which are able to image or analyze materials we can not generally observe with the resolution offered by visible techniques Hedewnb D Topfx Agmenn System is complete with all Books, service Manuals, Software and computer. Also many parts. 1 x Leybold Trivac D16B Vacuum Pump 1 x Alcatel 2012 A Vacuum Pump 2 x integrated Turbo Pumps

Condition: good (used), Year of construction: 2001, Machine is in good condition. Parts shown by hand not come. Cutting tools not come. Hsdpfjrpk Rmjx Agmonn

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 37022, We offer this as-new Tagarno ZIP Microscope + LCD Monitor, year of manufacture 2021. Manufacturer: Tagarno Model: ZIP Year of manufacture: 2021 Condition: as new Category ID: 689 Type: Microscope + LCD Monitor Professional digital inspection system for quality control and PCB assembly. A high-quality digital microscope, TAGARNO model ZIP, is for sale. This device is ideal for precise inspection, repair, and documentation in electronics manufacturing or precision engineering. Technical details and highlights: * Resolution: Full HD (1080p / 60fps) for sharp, lag-free imaging. * Zoom: 30x optical zoom (plus digital zoom). * Working distance: Large clearance under the camera (approx. 250 mm), ideal for soldering. * Interface: HDMI output for direct monitor connection (no PC required). * Condition: Technically and visually perfect, very low operating hours. Scope of delivery: Hnodpfx Ajym Sulegmsn * TAGARNO ZIP camera head * Original TAGARNO stand / frame (column) * Power supply unit and HDMI cable Several units available / quantity discount possible for bulk purchase. If you have any questions or need further information, please feel free to send us a message or contact us by phone.