Used Long Hole Drilling for sale (13,016)

Condition: used, Year of construction: 2017, Number of drilling spindles: 21 pcsPitch: 32 mmDrill chuck: Clamping surface of drill shank: 10 mmOperation: foot pedalTools included: yesDrilling direction: from below & end faceTilting: manualTilting angle: only 0° or 90°Max. pass-through height: 80 mmMax. pass-through width: 750 mmNumber of material clamps: 3 pcsType of material clamping: pneumaticDesign: stationaryStop system: only for structural seriesWeight approx.: 400 kgMotor power: 1.5 kWDust extraction diameter: 120 mmStorage location: with customer Bwodpeihghrsfx Ak Esl

Condition: like new (used), The machine is completely overhauled and therefore as good as new! Bjdpfx Akefgwlbe Ejwl Technical specifications Drilling method : single-lip drilling Number of spindles 1 Drilling range in steel D= 1-6 mm Drilling depth 420 mm Max. workpiece length 420 mm Manufacturer: TBT / SFT New electrics and new controls!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1320x1220x1400 mm Weight 275 kg Total power requirement 1,5 kw Bodpfxevz Eibo Ak Eswl

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Immersion pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Clamping fixture with clamping table Clamping fixture with centering tailstock Clamping fixture with centering clamp ZS2 (HICO) Force measuring system KIMISIT 0 – 30 Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Bodpfxjwx E N Ie Ak Eswl Lubrication pump Vogel DM7 Control unit for main and feed drives

Condition: excellent (used), Year of construction: 2000, Table clamping surface: 600 x 300 mm Travel range: X 350 Y 250 mm Adjustment range W-axis (motorized): 200 mm Servo-controlled EDM axis Z: 340 mm Drilling with electrodes from Ø 0.2 to 4 mm Max. workpiece weight: 300 kg Connected load: 3.5 kVA Bwsdpfxow Hyfye Ak Ejl Machine weight: 700 kg

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, table length: 1,050 mm, table width: 1,050 mm, center height: 1,040 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Drilling depth: 1,200 mm Spindle speed (min): 50 rpm Bsdsxm S Idepfx Ak Eswl Spindle speed (max): 3,000 rpm Feed rate (Row 1): 18 – 160 mm/min Feed rate (Row 2): 35 – 320 mm/min Rapid traverse speed: 3.5 m/min Rated motor speed: 1,400 rpm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm MACHINE DETAILS Dimensions (L x W x H): 6,500 x 3,500 x 2,900 mm Electrical data Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW EQUIPMENT 3-axis Heidenhain digital readout Coolant system

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Bwjdpowyup Tsfx Ak Ejl Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Height: 3400mm Weight: 6500kg

Condition: refurbished (used), Year of construction: 2017, operating hours: 428 h, functionality: fully functional, machine/vehicle number: 428, drilling depth: 400 mm, spindle speed (max.): 23,700 rpm, drill diameter: 6 mm, number of spindles: 1, workpiece length (max.): 450 mm, No reserve price - guaranteed sale to the highest bidder! Machine has only 428 operating hours! TECHNICAL DETAILS Control: SFT TBS 200 Drilling method: Single-lip drilling Number of spindles: 1 Drilling diameter in steel: 1 – 6 mm Drilling depth with plunge spindle: 120 mm Drilling depth with sealed housing only: 400 mm Sealed housing with one-piece steady rest: 350 mm Max. workpiece length: 450 mm Max. rapid traverse: 4,000 mm/min Spindle drive Power at 2,810 rpm: 2 kW Power at 7,880 rpm: 3.5 kW Power at 23,700 rpm: 1.5 kW Frequency range: 100 – 800 Hz Tailstock Motor power: 0.75 kW Spindle speed: 500 rpm Max. clamping stroke: 60 mm Pre-slide drive Type: Ball screw spindle 25 × 5 mm with servo motor Drill bushing holder and chip ejector Drill bushing holder: permanently mounted on the machine bed Components: BOTEK drill bushing holder and sealing housing Chip ejection: downwards into the chip container MACHINE DETAILS Dimensions: 2.7 x 3.05 x 1.7 m Weight: 2.5 t Operating hours: 248 h Operating voltage: 400 V Frequency: 50 Hz Connected load: 14 kW Coolant system Tank volume: approx. 500 l Filtration: integrated paper belt filter Coolant pump: single-piece with frequency converter Flow rate: approx. 5 – 12 l/min Max. coolant pressure: 160 bar EQUIPMENT - Hydraulically adjustable tailstock - Manual tailstock adjustment for different tool positions Workpiece lengths - Drill bushing holders and sealing housings from BOTEK - Chip ejection directly into a collection container - Integrated coolant system with paper belt filter - Includes deep-hole drill bit and technical documentation Transportation possible by standard truck Bjdpfxowu Eb Aj Ak Eswl

Condition: good (used), Year of construction: 1995, Pot hole boring machine Grass ECO Press Year of manufacture 1995 S/N 9502665 in good condition Bodpfxsk D T Ncs Ak Ejwl right and left linear guide (work table can be supplied ) weight approx. 45 kg 380 V - 50 Hz - 2,5 A pneumatic connection - max 6 bar CE marked

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Bwedpsx Ehg Tsfx Ak Ejl

Condition: new, overall weight: 4,500 kg, Year of construction: 2025, LONG REACH excavator arm 8m, 10m, 12m, 14m, 16m, 18m, 20m. 22m + BOAT POSSIBILITY OF PRICING FOR ANY MACHINE. POSSIBILITY OF PRICING FOR LENGTHS FROM 8M UP TO 22M BELOW OFFER FOR LONG REACH BOOM 16M FOR JCB JS 220 + Bodpfxsua U Acs Ak Eewl BUCKET 0.6 M3 TECHNICAL SPECIFICATIONS Material: S355 steel Length: 16 m Maximum reach: "forward": 15.5 m Maximum digging depth: 11.2 m Weight: ca. 4500 kg Dipperstick capacity: 0.6 m3 All pins are hardened (to increase hardness above 50 HRC) 1 bucket cylinder, 6 pipes, 4 hoses, 8 pins, 5 grease lines, 1 set of couplings Fabra: KAISAI brand (colour can be selected) Hose: GATES brand All pins are equipped with grease nipples All "pipes" are phosphated

Year of construction: 1980, condition: ready for operation (used), Ayen Type DB 1000 K 23 Year of manufacture 1980 GS-tested number of spindles 23 pieces number of drilling beams 1 spindle distance / grid 32 mm drilling from above Bodpfjpgkqpex Ak Eewl swiveling pneumatic Hole line drilling device

Condition: ready for operation (used), Drilling diameter 5 ~ 25 mm Drilling depth 1000 mm Headstock Tank pump Filter Bodpfsdgpltex Ak Eewl

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling depth: 600 mm, rotational speed (max.): 6,000 rpm, center height: 250 mm, controller model: SIEMENS Sinumerik 840 D, workpiece diameter (max.): 25 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been completely overhauled! TECHNICAL DETAILS Working depth: 600 mm Working diameter: 4 – 25 mm Number of spindles: 2 Centre height: 250 mm Centre distance: 203.2 mm Speed range: 1,000 – 6,000 rpm Feed rate: 0 – 300 mm/min Rapid traverse: 6,000 mm/min MACHINE DETAILS Control system: SIEMENS Sinumerik 840 D (Retrofit) Drilling system: Single-lip deep hole drilling Main drive: 2 x 5.5 kW EQUIPMENT - Single functions for machine setup - Semi-automatic operation for manual loading - Robust spindle carriage - Machine monitoring with spindle speed display - Table plate in special cast design - Safety guard with sliding door - Machine bed with hardened and ground linear guides - Internal coolant supply through drilling spindle - Electrical equipment according to IEC standards - Separate control cabinet with safety devices Bwodjxpvbtspfx Ak Eel - Control panel in working area

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, drilling depth: 750 mm, spindle speed (max.): 6,720 rpm, drill diameter: 20 mm, spindle stroke: 1,450 mm, distance between centers: 120 mm, TECHNICAL DETAILS Number of spindles: 4 Spindle spacing: 120 mm Spindle drive: 4 × 4 kW Spindle speed: 672 – 6,720 rpm Spindle stroke: 1,450 mm Drill diameter: 4 – 20 mm Drill depth: 750 mm EQUIPMENT - Chip conveyor Bedpfswm Ebyjx Ak Eswl - Air cooler - Filter unit - Revolving belt with workpiece carriers

Condition: refurbished (used), T30-1000 KTN/NC The machine will be completely overhauled and will be like new! The machine gets a completely new electrical system with our control. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Bedpfx Aksfgwk Ho Ejwl Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm

Condition: good (used), Year of construction: 1979, TBT T30-4-750/1000 -drilling diameter ~30 -drilling depth 750/extension ~1000 -Tank -Pumps -loading equipment Bwedsd Ri H Eopfx Ak Ejl -Tailstock

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, rotational speed (max.): 5,600 rpm, TECHNICAL DETAILS Drilling Data Drilling depth: 1,500 mm Axis Data X-axis travel: 3,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm X-axis feed rate: 15 m/min Y-axis feed rate: 15 m/min Z-axis feed rate: 15 m/min Feed force: 30,000 N Rapid traverse speed: 15 m/min Spindle Data Bwodpfxjw Izr Ao Ak Ejl Speed: min. 300 rpm Speed: max. 5,600 rpm Table Data Clamping surface: 2,000 mm x 1,250 mm Number of T-slots: 7 Table load capacity: 12,000 kg Tool holder: SK50 MACHINE DETAILS Control: TNC430 Dimensions & Weight Dimensions (L x W x H): 8,400 x 8,300 x 4,500 mm Total weight: 30,000 kg EQUIPMENT Stepless speed adjustment Drill bit grinding machine Note: Dismantling and loading can be offered for €8,000.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 6207 20.57, workpiece weight (max.): 3,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,675 mm, table width: 700 mm, quill travel distance: 1,000 mm, TECHNICAL DETAILS Bwjdow Elrvepfx Ak Esl Travel Paths and Drilling Motion Quill travel z: 1,000 mm Vertical drilling unit: 800 mm Traveling column in drilling direction w: 1,100 mm Table and Axes Table transverse travel x: 1,000 mm Table size: 1,675 x 700 mm Table load capacity: 3,000 kg Spindle and Machining Tool holder: SK40 Spindle speed: 100 to 4,000 rpm Drilling capacity in steel: 32 mm Thread cutting: M24 MACHINE DETAILS Power connection: 7.5 kW Dimensions & Weight Weight: 4.8 t Footprint: 3,500 x 6,000 x 2,400 mm Transport dimensions without enclosure: 2,400 x 6,000 x 2,400 mm

Year of construction: 1983, condition: used, machine/vehicle number: 508323, 21-spindle, pitch 32 mm tool holder M 10 external thread spindle distance max. 640 mm Gantry passage max. 1056 mm, stop length 2500 mm with 4 swiveling stops Bwodpfx Akjdardxo Eel drilling unit with motor 2,2 kW drilling head swiveling, drilling from below height adjustment max. 80 mm drilling depth max. 80 mm, ex location Seevetal, as viewed, subject to prior sale

Condition: reconditioned (used), -Drilling diameter 5~25 mm -Drilling depth 1500 mm -Tailstock -Tank Bodpfx Ajhuil Rok Eowl -pump -Filter

Condition: good (used), -Drill through fair 5-30 mm - depth 750 ~ 900 mm - conversion to customer specification Bwodpfxo Dcz Do Ak Esl

Year of construction: 1986, condition: used, - working length (mm): 3200 - drilling units: 3 from below with 3-spindle drilling head - Hold down: 2 from above - pressure cylinder: 1 from the side Bwedpfx Aj Drmxok Ejl - control: Siemens of newer construction

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining Bwedpfxow E H E Rj Ak Ejl - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: good (used), A hole row drilling machine from Knoevenagel is offered here. Data: Table size: 58 x 43 cm (with a scale of 0-50 cm) The table is height-adjustable and tiltable VGC 18809 420 V 4.0A 15 spindles All further information as well as the condition can be found in the pictures. Bsdped Sdurofx Ak Eewl