Used Log Carriage for sale (30,972)

Condition: used, Year of construction: 2000, functionality: fully functional, Holtec sorting block train, type SBZ. Length 94.5 m. 52 boxes. Kodpfjw Ug Agjx Afisnc

Condition: used, Chassis with friction wheel drive for DEMAG lightweight crane system, suitable for crane rails made from system profiles type KBK 2 and KBK II L. Type: DRF 200-B14-1-43, serial no.: 45950995. Travel speed: approx. 40 m/min = 0.67 m/sec. Motor power: 0.37 kW. Power supply: 400 Volt, 50 Hz. Drive motor: DEMAG, type ZBA 71 A2 B007. KBK 2 / KBK2L trolley for suspension in crane track. Wheel diameter: 82 mm, wheel width: 21 mm, trolley width: 78 mm. Knjdpfx Afow Nxyysioc Space requirement (L x W x H): 410 x 320 x 470 mm. Weight: 28 kg. In good condition.

Condition: used, mileage: 658,000 km, Year of construction: 2016, Serial number: YS2R6X4000211xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21081 Specifications: EU-approved until 20.07.2026 2016 model Km: approx. 658,000 Full air suspension Kedpfew Nvfmsx Afisnc Automatic Tires (see pictures) Euro 6 Alucar superstructure Length: 1,060 cm Width: 255 cm Wheelbase: 450/135 cm Curb weight: 15,120 kg Max payload: 14,805 kg 6x4 730 hp Toolbox Autoline sand spreaders Rotating light bar Tow hitch Small damage at the lower front (visible in pictures) Bed Refrigerator Radio/CD Climate control/AC Description:2016 Scania R730 tandem timber truck with Alucar superstructure.Crane without cabin can be included at an additional cost.Recently EU-approved and ready for operation.Quick delivery possible. Km: 658000 HK: 730 Technical approved: Yes EU-approved until: 20.07.2026 Own weight: 15120 Total Weight: 30000 Payload: 14805 Width: 255 Length: 1060 Euro: 6 Model: R730 Gearbox: Automatic

Condition: used, overall weight: 39,000 kg, maximum load weight: 33,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, loading space width: 2,550 mm, first registration: 02/2022, next inspection (TÜV): 02/2026, Year of construction: 2022, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3-axle platform for sawn and round wood - JANZEN System Werlte First registered 02/ 2022, from 1st hand Empty weight only 6,000 kg Loading length 13,550 mm, designed for fifth wheel height 1,200 mm Aluminum front wall reinforced version 12 stake pockets welded into the outer frame on each side, 2° incline, as a parking option directly behind the front wall 8 stake pockets across the direction of travel, in the middle in the longitudinal direction 8 stake pockets distributed over the entire length welded 16 pieces ECOO aluminum stakes type 9, load capacity per stake pair 9,000 kg, 8 rows of toothed strips between the stake pairs Chassis fine-grain steel S700, KTL coated and painted SAF axles reinforced off-road version, with large disc brakes, 430 mm 1st axle lift axle WABCO trailer EBS with anti-skid protection RSS WABCO smart board, with weight display axle loads Tires 6-fold 385/65 R 22.5, tread depth 90% Lighting full LED Crank seat post full load Kjdpfjw I Ixpox Afisnc RENTING is the new BUYING, also available with us in full service rental IMMEDIATELY-----

Condition: refurbished (used), LBL Brenta chipper CT 700 Max. Cutting depth = 150mm. Knodpfx Aeucp N Aefioc Max. Cutting height = 650mm 9 blades Free center disc, overheating protection Clearance = 800mm Fast, precise positioning thanks to servo motor

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Log turner, infeed-outfeed conveyors, log correction hydraulic crane, heavy duty construction Equipment from 2019 Kjdsu N Ac Sepfx Afionc

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, Roundwood orienter with lower cutter. After repair. Kjdpowx I D Uefx Afionc

Condition: used, overall weight: 18,000 kg, maximum load weight: 15,030 kg, axle configuration: 2 axles, first registration: 03/2021, total width: 2,550 mm, total height: 1,210 mm, Equipment: ABS, For enquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Pavic HTA 20 QSTE 690 Short Timber Trailer * Mileage: 230,265 km * Aluminium rims * Additional headlights on left, right, and rear of vehicle * Air suspension * Trailer coupling, 40 mm towing eye, Duomatic * SAF axles * Disc brakes * Wabco ABS * Spring brake actuators * Wabco smartboard * Permissible gross weight: 18,000 kg * Unladen weight: 2,970 kg Kodpfx Afew Sf Eheionc * Payload: 15,030 kg * Tyre tread depth: 1st axle 12-14 mm, 2nd axle 8-14 mm We are happy to provide you with a leasing or financing offer upon request. Mr. Seidel (phone) will be happy to assist you. Further information can be found on our homepage. !!! Errors, changes, and prior sale reserved !!!

Condition: used, Field of application: Mining Knsdpfsw Hzt Sox Afisc Explore the superior processing capabilities of the Polygonmach Coarse Material Washer, a state-of-the-art solution designed to exceed expectations in processing sand and gravel. Polygonmach, a leading name in the industry, constantly pushes the boundaries of innovation to bring high-quality, reliable solutions to businesses. The Polygonmach Coarse Material Washer is a fundamental tool in the industry, specializing in the thorough cleaning, classification, and dewatering of coarser fractions. Designed to handle robust materials such as sand and gravel, it significantly enhances the quality of your output, leading to increased customer satisfaction and business growth. Built with high-capacity processing in mind, our Coarse Material Washer employs powerful scrubbing technology. This action facilitates the removal of impurities, thus unlocking the true value of your raw materials. The result is high-quality end products that meet rigorous industry standards. One of the key features of the Polygonmach Coarse Material Washer is its replaceable heavy-duty paddles. These are engineered to withstand the harsh environment, thereby increasing machine lifespan and reducing maintenance costs. The robust design is well-suited to large-scale operations, delivering high-volume processing efficiently. Moreover, it comes with an adjustable weir plate that offers control over the water volume and the fines. This flexibility empowers you to produce materials of desired specification and moisture content, guaranteeing consistent product quality. The Coarse Material Washer from Polygonmach is not only highly functional but also user-friendly.

Condition: used, overall weight: 39,000 kg, empty load weight: 6,150 kg, maximum load weight: 32,850 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,330 mm, loading space height: 1 mm, first registration: 02/2022, suspension: air, color: black, tire size: 385/65R22.5, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, SAF axles, air suspension, first axle liftable, raise/lower function, ABS (Anti-lock Braking System), underrun protection, side aluminium underrun protection, landing gear, toolbox, stanchions. Body: 3-axle timber transport semi-trailer with 8 Ecco Steel stanchion cradles, LIKE NEW! 3x 9t SAF axles, disc brakes, first axle liftable, interchangeable 2" king pin, unladen saddle height approx. 1150mm, minimum free front clearance from the coupling center: 2240mm, lightweight chassis made from high-strength fine-grained steel. Loading height approx. 1540mm. Knjdpfxsw Ryuhj Afijc Prices: model year 2021 from EUR 25,900.00 net up to new from stock for EUR 29,900.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! - .

Condition: excellent (used), Exotic log band saw - Feeding cross conveyor with feeder - Brenta band saw carriage, type Bamat 1600 opening 1600 mm, 5 trestles, 3 log turners - circular cut-off saws, 2x 13 kW - Brenta band saw, type Irpad 1600 1600 x 240 mm, saw blade width 260 mm - take-off roller table - roller conveyor with cross haul-off Knedpfx Afskzg Ihsisc - cross conveyor - roller table

Condition: used, overall weight: 30,000 kg, maximum load weight: 24,200 kg, axle configuration: > 3 axles, first registration: 11/2011, Equipment: ABS, Manufacturer HFR Model 30 t. 4 axles Timber transport / Wood transport Year 2011 Condition Good Serial Number UH9PX301125HF1141 Ref. nr. 7949 Reg. date: 25-11-2011 Last seen: 10-12-2024 Disc brake: ? ABS: ? Rear axles: BPW Suspension: Air Tire Size: 265 / 70R19,5 Cover% left 100 - 100 - 80 - 100% Knsdew N Uuyjpfx Afiec Total weight: 30000 kg. Net weight: 5800 kg. Load capacity 24200 kg. Inside length: 7400 mm.

Condition: new, Year of construction: 2025, functionality: fully functional, Hydraulic log ladder, for log diameters from 7 cm to 66 cm. Knedpfxev N Eiqs Afiec

Condition: used, Fork carriage ISO class: ISO class 3 = 2,500 - 4,999 kg Knsdpot S Rv Dsfx Afijc Technical condition: very good Description: Mast type Triplex Carriage class 3A (51 cm) Width 1120 mm Dimension inside 415 mm Dimension outside 475 mm Height 635 mm ID OS975

Condition: used, New: Yes Field of application: Mining Power: 110 kW (150 HP) Empty weight: 35.000 kg Dimensions (LxBxH): 700 x 240 x 240 cm Engine type: V-type Volume of the tank: 20 m^3 Productivity: 400 tph Log(Blade) Washer(With SKF AUTOMATIC LUBRICATION) Model : LW25 Machine Size : 2000 X 7000 X 2 (Double row) Drive System : 2 X 55 kW Feeding Size : 0 - 50mm Main Body : It is Manufactured ST37 A1 Quality 8mm Sheet as Twisted er Sheet to Which the Front Reducer Group is Connected Will be Manufactured From 12 mm Sheet Metal. Helice: Double Row Carrier Spiral Spoons ST 37 are Manufactured From 8 mm Sheet and the Arms Against Wear Will be Covered With Casting, Helices Will be Hardox Coated. Shaft : Made of Cr-Ni-Mo Alloy Steel. Knodpfx Afjw Hzd Doioc Housing : GS52 Steel Casting Parts Used. Bearing : SKF or FAG Mark Heavy Duty Spherical Roller Bearings.

Condition: like new (used), Spare parts for Lisec frame bending system type: BSV-45, Length: 2040mm, Width: 65mm, Kjdpfeualqkex Afijnc Height: 22mm, Weight: approx. 20Kg,

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Hombak trunk milling machine ESR 900/700/960 Root inflow reducer Kjdpfot Hf T Hsx Afionc - year of manufacture 1993 - log diameter max 1300 mm TECHNICAL PARAMETERS: minimum log length 2000 mm 48 knives main motor 45 kW hydraulic pump motor power 11 kW milling head rotation motor 5.5 kW shaft length (milling / cutting length) 980 mm pressures machine overall dimensions (length / width / height) 550 / 250 / 340 cm weight ~10 t

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Knodpoupiapofx Afioc Total weight 100 kg

Condition: used, Complete Carriage Galileo VS including Spinner and Data-Floppies.Out of a well working Galileo. Knjdebwg T Tspfx Afisc

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2021, next inspection (TÜV): 05/2024, Equipment: ABS, -axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic mudguards, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear Knsdpen I Id Esfx Afioc * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Condition: used, overall weight: 39,000 kg, empty load weight: 6,000 kg, maximum load weight: 33,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,330 mm, loading space height: 1 mm, first registration: 02/2019, suspension: air, color: black, tire size: 385/65R22.5, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. 3 axles, SAF axles, air suspension, first axle liftable, raise/lower function, ABS (anti-lock braking system), underrun protection, lateral aluminium side guards, support legs, storage box, stanchions. Body: 3-axle timber transport trailer with 6 Ecco Steel stanchion sockets, 3x 9t SAF axles, disc brakes, first axle liftable, interchangeable 2" kingpin, unladen fifth wheel height approx. 1150mm, minimum free front distance from fifth wheel center approx. 2240mm, lightweight frame made of high-strength fine-grained steel. Knjdpewkvqajfx Afijc Loading height approx. 1540mm! Multiple units in stock from insolvency! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, intermediate sale, and errors!

Condition: new, The Brugger BS31 Pro log band sawmill - Powerful precision for efficient sawing! The Brugger BS31 Pro is a simply designed yet sophisticated sawmill that effortlessly transforms logs with a diameter of up to 76 cm into high-quality boards and beams. The log band sawmill requires little technology and is therefore easy to operate and requires little maintenance. The BS31 Pro has an electric height adjustment, digital height display, adjustable blade guide and many other improvements that make work easier. Technical data: - 76cm trunk diameter - 14 hp petrol engine or 7.5 kW electric motor - Electric height adjustment - digital height display - adjustable blade guide The standard version of the sawmill has a track length of 4 m, so that logs with a length of approx. 3 m can be processed. If required, the sawmill can easily be extended by a further 2 m. The log band sawmill is equipped with a powerful 14 HP Kohler petrol engine or optionally a 7.5 kW 400V electric motor to offer you maximum performance and flexibility. The BS31 Pro log bandsaw is perfect for hobby sawyers, but also for professional use and forest owners. Knjdjtr A Egspfx Afiec Prices: Brugger BS31 Pro - 4.599 € 2m track extension - 349 € Get the Brugger BS31 Pro log band sawmill now and experience powerful, precise sawing at an unbeatable price-performance ratio! Contact us for a customized offer!

Condition: used, mileage: 457,000 km, Year of construction: 2021, Serial number: YS2R6X4000217xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20676 Specifications – Truck: EU approval valid until: 08.01.2026 Mileage: 457,000 km Transmission: Automatic Engine: 650 hp – Euro 6 Driveline: 6x4 Suspension: Full air suspension Retarder Rear axle: R835 with hub reduction PTO on gearbox Tires: In good condition Extra lights Trailer hitch (VBG) Sleeper cab New clutch New brake pads Radio/CD Air conditioning (A/C) Documented service history with Scania Specifications – Crane and Superstructure: Superstructure: Timber body from OP Høglunds ExTe 2.70 Crane: Epsilon M110L Kodpfxowqwh To Afionc Reach: 4+2 Crane certification valid until: March 2026 Description: Scania R650 6x4 timber truck from 2021, equipped with an Epsilon M110L timber crane and superstructure from OP Høglunds. Both truck and crane are approved – the truck is EU-approved until January 2026, and the crane is certified until March 2026. Ready for delivery! Km: 457000 HK: 649 Technical approved: Yes EU-approved until: 08.01.2026 Own weight: 15500 Total Weight: 30000 Payload: 14425 Width: 255 Length: 1041,5 Euro: 6 Model: R650 Gearbox: Automatic

Condition: new, functionality: fully functional, Year of construction: 2024, color: red, overall weight: 100 kg, total height: 1,000 mm, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg Knedpfxjuph Uxo Afiec included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: used, Year of construction: 2007, functionality: fully functional, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveying technology year: 2022 Serial number: 141-8300 Knjdpfxjwlfdxs Afiec Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 level compensators with claws (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • Left: PLC - Right: joystick • 1 Zenz automatic sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water cooling with 20 l tank and nozzle o Mounted on blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifter preparation in frame o With control unit o Mount for pipe o Two mounts for cylinders • Hydraulic frame ejector for 820 mm • Green horizontal laser indicator Mechanisation consisting of: • Hydraulic folding frame for offloading at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors operate simultaneously • Roller table 4 m long – slightly inclined with stop o All electric and hydraulic elements operable from the operator’s station The block bandsaw including conveyor technology is fully operational.