Saw carriage roller conveyor with 2 m long rollers

MÖHRINGER RG 2000

Condition: repair required (used), functionality: unexamined, Dovetail slotting machine for wood packages dimter HK 400 Dovetail slotting machine Lhodpsvi Hw Nefx Ab Asn Input lengths: 800–6000 mm Cutting height: 285 mm, optionally 300 mm Color: Blue Consisting of: Pos. 01 Packaging unit Pos. 02 Package roller conveyor Pos. 03 Central milling cutter Pos. 04 Package roller conveyor Pos. 05 Package singulation unit Pos. 06 Chain cross conveyor Pos. 07 Infeed roller conveyor Pos. 08 Cycle press Pos. 09 Feed unit Pos. 10 Cut-off saw Including control cabinets and operator panels The machine requires repairs and is sold in its current condition. It has already been dismantled and is stored in Achern. All technical documentation is available. We are available at any time to answer questions about the machine and provide technical information. We will provide consulting support for repair and reassembly.

Condition: like new (used), Year of construction: 2012, operating hours: 3,432 h, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale: Jumag steam generator with gas burner Type C 600 Steam output: 600 kg/h. Max. steam pressure: 13 bar. Like new, only 3,432 operating hours. Ljdpfx Aoydq Nisb Aohn Delivery available at extra cost. If you have any questions, please contact us.

Condition: used, Year of construction: 1994, operating hours: 8,972 h, 1994 | Dresser TD 15 E Without Ripper | Used Tracked Dozer | 8972 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 21600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Lhedpfx Absx Rhbws Ajn 👷‍♂️ Inspected by an independent expert 64 inspection points 53 approved ✅ 8 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the bulldozer. Both lift cylinders have leaks and shocks on the rods. Absence of a left diagonal reinforcement bar from the front blade frame – the bar has been repaired by welding. Slight spray of oil and smoke when opening the oil tank cap. No visibility on the hydraulic oil level. The left rear window has been replaced with plexiglass and the front windshield as well as the side windows are cracked. No retention of the door in the open position. Absence of the diesel tank cap. The engine is stopped by pulling a cable. The parking brake control has been replaced by a bolt. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40009 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2002, condition: reconditioned (used), Fully automatic tenon and mortise system: Double-Pack type with automatic feeding with multiple cross-cutting saw with stacking system Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with 10 mm tenon size: hardwood 120 cm² softwood 150 cm² Tenon design: vertical and horizontal Adhesive type: PVAC white glue, two-sided adhesive application Electrical power: Connection voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tenon length / optional wood cross-section and adhesive type can still be adjusted. Performance: 6 milling stations/min Working height: 960 mm Table width: 600 mm Adhesive application: double-sided Technical parameters: Input material: Lsdpfx Asg D Ugkjb Aohn Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (on both sides of the

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below Lodpfjp H Sv Dsx Ab Ashn

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, used automatic edging line Möhringer Autojet S-singulator, infeed roller conveyor, through-feed cross-cutting Ljdpfx Aew Tkt Hsb Ashn automatic measuring table with infeed edging saw with double-lamella chip separator driven roller conveyor with pull-off device control system and electrical cabinet

Condition: ready for operation (used), Effective width: 1500mm, screw diameter: 2x 500mm, motor power: 2x 3.5kW, outlet: 2x 800x800mm, length: 7000mm, conveying speed: 50m/min, with steel construction underframe, closed constructional design with bunker walking elevation, an inspection is possible, year of construction unknown, was overhauled in 2022. Ljdpsn Tpm Ajfx Ab Aehn

Year of construction: 2010, condition: ready for operation (used), Fully automatic finger jointing line: type double pack Machine is dismantled Machine is checked with functional guarantee Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm wood cross-section: min. 20 x 40 mm max. 80 x 180 Wood output length: 6030 mm Max. Wood cross section at 10 mm tine size: hardwood 120 cm² softwood 150 cm² Tine design vertical and horizontal Glue type. PVAC white glue, 2-sided glue application Electric power: Supply voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tine length / possibly wood cross-section and glue type can still be adapted capacity: 6 milling tables/ min working height: 960mm table width: 600 mm Glue application: double-sided application With endless packaging Lhedpfxencd Ute Ab Aen Technical parameters: Input material: Input length of parts (min. - max.): 150-1000mm Part width (min. - max.): 40-155 Part thickness (min. - max.): 20-80mm Working height : 960mm Bundle width: 600mm Glue application: double-sided application (on both sides of the

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame Lhjdpfoyhduyox Ab Asn - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Finger Jointing Line GreCon CombiPact Manufacturer: GreCon Model: CombiPact Year of manufacture: 2006 Machine description: For sale: GreCon CombiPact finger jointing line, year 2006, designed for the production of finger-jointed solid wood elements. This machine is a compact and efficient solution for woodworking companies producing structural timber, glued components and solid wood elements for further processing. The GreCon CombiPact is well known for its reliable construction, precise finger profile machining and consistent production quality. Suitable for processing softwood and hardwood, depending on tooling and machine configuration. Technical data: - Input workpiece length: approx. 150 – 1000 mm - Working width: approx. 40 – 205 mm - Working thickness: up to approx. 80 mm - Pressing / output length: approx. 3000 – 6100 mm - Finger joint profile: typically 10/11 mm - Gluing system: automatic glue application system - Final press: included - Material: softwood and hardwood - Machine type: finger jointing line - Application: production of finger-jointed timber and solid wood components Features / advantages: - Compact design - High precision finger joint machining - Reliable and proven GreCon technology - Suitable for continuous production - Good solution for joinery, furniture and structural timber production Condition: very good Lsdpfx Abjyu Unws Ajhn Note: Technical details may vary depending on the exact machine configuration, tooling and installed options.