Used Locksmith for sale (43)

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Crodpfomrnk Esx Albeg Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Crsdpfszkmi Dsx Albjg Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 736043, KUKA KR30L15/2 robot, serial number 736043 is offered with the KRC1 controller. This robot (manufactured in 1998) is ideally suited for automated metalworking and locksmithing applications. The KUKA brand stands for high quality and reliability. With a payload of 15 kg and a reach of approximately 3100 mm, the robot can be used flexibly and can automate a wide range of applications in the industry. The KRC1 controller enables simple programming and operation of the robot. Secure this high-quality KUKA robot for your company now. Used item – normal signs of wear and tear. Further details, article numbers, and images are available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries are available upon request – please specify country, city, and postal code. Freight costs are available upon request – please specify the delivery address. Crodpfezmtp Nex Albsg

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: 3229, type of input current: three-phase, rotational speed (min.): 35 rpm, rotational speed (max.): 70 rpm, input voltage: 500 V, For sale is a robust metal circular saw from the manufacturer Eisele, model VMS III. This machine is a classic cold circular saw designed for industrial use and stands out due to its solid construction and durability. Ideal for workshops, metal fabrication, or locksmith operations. Technical data: • Manufacturer: Eisele • Type: VMS III Cjdpfx Ajy Dc I Solborg • Year of manufacture: 1971 • Machine number: 3229 • Rotational speeds: 35 / 70 rpm • Voltage: 500 V • Motor power: approx. 1.8 to 2.6 kW • Frequency: 50 Hz • Version: Three-phase current • Equipped with a vise and mechanical feed Condition: Used condition, appropriate for its age. The machine is of heavy-duty construction and well-suited for refurbishment or immediate use. Visually with signs of wear.

Condition: good (used), Vise, bench vise, locksmith vise, parallel vise, heavy-duty vise -Parallel vise: jaw width 150 x 30 mm Codjkvrpwepfx Alberg -Wingspan: 190 mm -Quantity: 1 available -Dimensions: 485/210/H190 mm -Weight: 26 kg

Condition: good (used), Try square, locksmith square, hair square, precision hair square, control square -Manufacturer: Hommel, stop angle DIN 875/0 -Type: 600 x 400 mm Cjdpjw A Inzefx Alborg -Accuracy level: 0 -Dimensions: 615/400/55 mm -Weight: 6.6 kg

Condition: good (used), Vise, bench vise, locksmith's vise, parallel vise, heavy-duty vise -Manufacturer: ZS, solid vise -Clamping jaws: 150 x 25 mm -Wingspan: 215 mm -Dimensions: 440/170/H245 mm Credjycfttopfx Albsg -Weight: 31.8 kg

Condition: good (used), blacksmith vise, bottle vise, anvil vise, anvil, blacksmith's anvil, bench vise, locksmith's vise, parallel vise Cedpfx Aedl E Irolbjrg -Jaw width: 135 mm -Wingspan: 150 mm -Number: 8x vises available -Price: per piece -Dimensions: 450/160/H900 mm -Weight: 35 kg

Condition: good (used), Vise, bench vise, locksmith's vise, clamping vise, workbench vise, clamping vise, table vise -Manufacturer: Bernstein, Spannfix ball joint vise, rotatable 360°, tiltable 45° -Clamping jaws: 45 x 25 mm Credpfxox S Rq Ro Albeg -Wingspan: 90 mm -Table clamp: up to 82 mm -Transport dimensions: 310/10/110 mm -Weight: 1.4 kg

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily Csdpsv T Truefx Alberg clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press from Hiller & Lutz Year of manufacture: 1980 Fully functional In good used condition. Price reduced!!!!! Technical data on Gemini-Google: The Hiller & Lutz HP71 is a classic, robust manual spindle press (often also referred to as a piercing press), which is primarily used in locksmith shops, workshops, and the metalworking industry for tasks such as straightening, bending, pressing, or punching. Here are the common technical specifications for this model: Technical details (approximate values) Since these machines were manufactured over decades, details may vary slightly depending on the year of manufacture: Pressing force: approx. 20 to 25 tons (The designation "71" often refers to the size/frame width; the force results from the spindle pitch and the flywheel diameter). Spindle diameter: approx. 70 – 80 mm Stroke: approx. 200 – 300 mm (depending on the spindle length) Overhang: approx. 250 – 300 mm (distance from the center of the spindle to the stand) Table area: approx. 500 x 400 mm Through-height: max. approx. 400 – 500 mm (with the spindle rotated upwards) Flywheel diameter: approx. 1,000 – 1,200 mm Machine features Construction: Solid cast iron frame in C-shape for high rigidity. Drive: Manual, via the large flywheel; the energy is generated by the inertia of the wheel when the spindle is screwed down. Table: Usually equipped with a central through-hole and T-slots for tool attachment. Weight: The weight typically ranges between 700 kg and 950 kg, which guarantees a stable position (usually requiring bolted mounting to the foundation). Gemini says The dimensions of the Hiller & Lutz HP71 depend heavily on whether you are considering only the body or the total space required, including the flywheel overhang. Here are the specific dimensions for this model: Machine base dimensions (body) Height: approx. 1,800 mm to 2,100 mm (depending on the spindle position). Width (stand): approx. 500 – 600 mm. Depth (foot): approx. 800 – 1,000 mm. Crodpfxjwxyn Eo Albsg

Condition: used, functionality: fully functional, EYAN Universal Tool Grinding Machine – Used, including extensive accessories & documentation For sale is a high-quality universal tool grinding machine from the EYAN brand, in good used condition. The machine is ideally suited for the precise re-grinding and production of various cutting tools and is perfect for professional toolmaking as well as for locksmiths, maintenance companies, and training workshops. Thanks to its robust cast iron construction, the machine impresses with its smooth operation, stability, and precise grinding results. Codpfxezhx D Is Alberg Equipment EYAN Universal Tool Grinding Machine Precision chuck / tool holder Extensive adjustment and setting options Machine lamp Grinding wheel mounted Original under-cabinet with storage space Original operating manual Technical documentation Spare parts lists and documents Additional accessories and tools in the under-cabinet (see pictures) 400 V high-voltage connection Condition The machine is in good, used condition with the usual signs of wear and tear. It comes from an operating business and was in use until recently. Scope of delivery EYAN Universal Tool Grinding Machine Under-cabinet Chuck Grinding wheel Original operating manual Technical documentation Spare parts documents Accessories and tools as shown in the photos Application areas Tool and mold making Metalworking Locksmith shops CNC manufacturing Training companies Maintenance and repair Tool grinding machine, universal tool grinding machine, tool grinder, milling cutter grinding machine, drill bit grinding machine, milling cutter grinding, twist drill grinding, turning tool grinding, tool sharpening machine, precision grinding machine, toolmaking, metalworking, grinding machine, EYAN, universal grinder, tool grinder, cutter grinder, tool grinding, tool sharpening, 400V, industrial, workshop machine, mechanical engineering, grinding technology. An inspection and functional test are possible at any time by prior arrangement. Net price, plus 19% VAT.

Year of construction: 2014, condition: like new (used), Universal Tool Milling Machine from Deckel ( Germany ) apply for toolmaker , mold maker, education and Locksmith Travel : 320x250x300mm Speeds : 40-2240 U/min Taper : SK 40 Crjdpfx Alsi A I Rxebsg Table 600x210mm Travel (X,Y,Z -Achse) 300x140x340mm Spindle: SK 40 Speeds 40-2240U/min Feeds 12-630mm/min Power supply 50 Hz 3x 380V Motor 12,2KW Weight ca. 1000kg Dimension 1200x1900x1000mm

Year of construction: 2011, condition: like new (used), Universal Grinding Machine from Chevalier apply for toolmaker , mold maker, education and Locksmith Pressure: 60.0 t Square steel: 35.0 mm Pressure: 60.0 t Square steel: 35.0 mm Angle steel: 120x120x12 mm Round steel: 40.0 mm Punching cross-section in qmm: Ø28 in 15 / Ø38 in 11 mm Throat: 220 mm Flat steel: 200x20 / 300x15 mm Blade length: 317 mm Codpjiitwnefx Albjrg Oil capacity: 45,0 ltr. Working height: 940 / 1140 mm Strokes per minute: max. 26 Working stroke: 55,0 mm Total power requirement: 4.0 kW Machine weight approx.: 1425 kg. Dimension HxWxD: 1510 x 590 x 1570 mm

Year of construction: 1997, condition: excellent (used), Universal Turning key drawing machine from Cardinal apply for toolmaker , mold maker, education and Locksmith Slot width 3 - 100 mm max. groove length 1250 mm Cjdpfxsin Dkze Albjrg Pulling force 6000 kg Draw length 1250mm Motor 5,5 KW Weight 1650 kg Dimensions 1000x1650x1000mm

Condition: new, functionality: fully functional, Forklift Magnetic Sweeper – Stainless Steel – For Clean & Safe Industrial Floors Manufacturer: die magnetprofis GmbH & Co. KG Condition: New Availability: Immediately from stock —— Product Description: Our high-performance forklift magnetic sweeper is ideally suited for the fast and efficient collection of metal debris, shavings, nails, screws, wire scraps, or other ferromagnetic foreign objects on indoor or outdoor surfaces. It reliably protects tires, vehicles, and machinery from damage caused by stray metal parts. The brushed stainless steel construction is not only visually appealing but also guarantees corrosion resistance, durability, and hygienic cleaning – perfect for industrial, workshop, storage, or outdoor use. —— ✅ Technical features: • Mounting type: Fork tine mount – compatible with all standard forklifts • Material: Stainless steel V2A – rustproof & robust • Working width: approx. 1200 mm (other widths available upon request) • Magnet type: High-performance permanent magnets (maintenance-free) Crjdpfswx Nbzox Albog • Discharge: Mechanical via lever / manual tilting mechanism • Collected items: Nails, screws, shavings, nuts, drilling residues, and more • Ground clearance: Optimized for picking up small metal objects • Fastening: Incl. safety screws for anti-slip mounting —— Fields of application: • Freight companies & logistics centers • Construction depots, municipal operations • Metalworking / locksmiths / workshops • Recycling & waste management companies • Warehouses / production areas • Agriculture (yard cleaning, stables) —— Scope of delivery: • 1x stainless steel forklift magnetic sweeper • 2x wing screws for fork tine safety • Operating and safety instructions —— Enquire now – for clean surfaces and maximum safety. Also available in custom sizes or with your individual logo!

Condition: new, square edge steel 16 x 16 mm flat steel 100 x 5 mm L-beam 60 x 8 mm round bar steel 18.0 mm weight of the machine ca. 33.0 kg Properties : - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - - - - - - Cold bending capacity Flat steel 100 x 5 mm 65 x 10 mm Round steel 18.0 mm Square steel 16 x 16 mm Angle steel 60 x 8 mm Bending capacity hot Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 12 mm - - - - - - - - - - Crsdpfx Aexcux Rjlbsg Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - Offset block - Bending plate for round bar - Offset plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Condition: new, square edge steel 20x20 / 25x25 mm flat steel 100 x 7.0 mm round bar steel 22.0 / 27.0 mm L-beam 100 x 10 mm weight of the machine ca. 33.0 kg. range L-W-H 900 x 430 x 310 mm Features - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths Codpfexcuyhjx Alborg - - - - - Bending performance "cold" : Flat steel 100 x 7 mm 65 x 12 mm Round steel 22.0 mm Square steel 20 x 20 mm Angle steel 100 x 10 mm - - - - - Bending capacity "hot" : Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 15 mm - - - - - Scope of delivery - Bending plate - Angle stop stepless - Clamping block with eccentric clamp - Material stop