Used Lm for sale (1,177)

Condition: ready for operation (used), Year of construction: 2019, A cold-glue labeling machine Gernep is available. Direction of travel: LM, nominal output: 5000bottles/h, control range: 1000-5500bottles/h, gluing height: 330mm, bottle format height range: 297mm-350mm, bottle format diameter range: 74mm-89mm, bottle material: glass, bottle volume: 0.75/1l, bottle content: wine, application: body/neck ring label/back label. Cold-glue format 1: label length range: 25mm-160mm, max. label height: 150mm, max. label height bottom edge/top edge: 15mm/320mm. Cold-glue format 2: min. label length: 25mm, max. label height: 115mm, max. label height bottom edge/top edge: 15mm/130mm. Including dating, optical orientation, upper-part height adjustment, glue pump and two cold-glue units. Documentation available. An on-site inspection is possible. Fedpjy N Ddxefx Albjgg

Condition: used, mileage: 899,000 km, power: 315 kW (428.28 HP), first registration: 11/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2024, brakes: retarder, color: blue, gearing type: automatic, Year of construction: 2014, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Special equipment: Airbag driver's side, Audio system: CD radio (Bluetooth), Compressed air connection in cab, Compressed air tank aluminum, Compressed air horn, Driver assistance system: Attention-Assist (drowsiness detection sensor), Driver assistance system: Brake assist (Active Brake-Assist 3), Driver assistance system: Lane departure warning system, Cab: with air suspension, Suspension: front springs 7.5 t, 2 leaf, Fleetboard vehicle computer, Tinted windshield, Info display 12.7 cm with additional display, Cabin filter construction site vehicles, LM rims 11.75x22.5 (ALCOA matt, on front axle), LM rims 9.00x22.5 (ALCOA matt), mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, reinforced engine brake, auxiliary drive MB 131-2c, frame lowering without bellows residual pressure control, tire pressure control system, retarder, automatic circuit breaker, seats in cab: Driver's seat comfort swivel seat, sun visor outside, sun protection roller blind side window, driver's door, socket 12V in passenger footwell, socket 24V / 25 A in passenger footwell, preparation / switch lift axle on semitrailer / trailer, preparation fleetboard, preparation cool box / refrigerator, oil cooler gearbox Further equipment: EURO 6 emissions standard, axle configuration: 4x2, axle load front axle 7.5 t, Actros 4, trailer socket 24V / 15-pin, work lights, exhaust to right outside, exterior mirrors electr. adjustable and heatable, differential lock rear axle, compressed air unit medium, cab: width 2.30 m, cab: L StreamSpace, cab floor with engine tunnel 320 mm, suspension: leaf / air, suspension: front spring block aluminum, electric window regulator, generator 100 A, transmission 12-speed - type: G 211-12, urea tank (AdBlue): 60 ltr, rear axle disk wheel 440, body/body: tractor unit, comfort couch below, comfort locking system, communication interface, 3-part mudguards, radiator blind, regulated power steering pump, 2-stage air compressor, engine 10.7 ltr. - 315 kW R6 diesel (OM 470), engine compartment encapsulation, ramp mirror, residual heat utilization, front and rear axle disc brakes, seat cover / upholstery: fabric, seats in cab: passenger function seat, seats in cab: Driver's seat backrest can be folded down, Voltage transformer 24V / 12V 10 A, Front splash guard, Front axle stabilizer bar, External left-hand storage flap, 24V cab socket, Tachograph / EC tachograph, Door extension for cab, Aerodynamically shaped underbody panelling, Front underride guard, CB radio preparation, Toll collection preparation, Cranked front axle, Regulated water pump, Perm. Gross vehicle weight 18.00 t, Auxiliary heating (water) Fedpfevhzffjx Albogg

Condition: used, maximum load weight: 28,600 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2005, next inspection (TÜV): 03/2026, loading space length: 7,520 mm, loading space width: 23,300 mm, loading space height: 1,500 mm, loading space volume: 26 m³, total width: 2,550 mm, total height: 3,150 mm, Equipment: ABS, * Corner bulkhead made of aluminum * Platform with roll cover * ALCOA LM rims * Underrun protection (foldable) * 1st axle can be lifted * Wabco Trailer EBS Fodpfx Aljy Hn Ngjbjgg * BPW ECO Plus axles * Disc brake * Air suspension * Tire dimension: 385/65R22.5 * Technical gross weight: 34,000 kg * Tare weight: 5,400 kg * Overall length: 8,600 mm * Next inspection due: 09/2026 * Vehicle does not have any outriggers installed!! * Vehicle number: 11882 * Errors and prior sale excepted * Advertisements and various lettering have been digitally removed. * We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: * Trade-in of your old vehicle * TÜV/inspection approval * Complete export processing * Arranging financing * Applying for export license plates * Vehicle transport * Vehicle registration * Recovery and vehicle transport * Your VTS Team

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: MN 141360, Offer for Sale – FillMatic MSE 220R Fgjdpfsxgd Hfex Albeg We are offering for sale a FillMatic MSE 220R mattress core stacker, a fully functional machine ready for immediate operation after connection. The equipment is intended for gluing mattress cores and ensures their automatic stacking at the end of the production line. Location: Slovakia – Oravské Veselé 02962 Basic Technical Data: • Machine No.: MN 141360 • Machine type: SRA 200 • Power: 4.8 kW • Voltage: 400 V • Year of manufacture: 2014 Machine Description: The FillMatic MSE machine serves as a mattress core stacker. • It is designed to prevent damage to still-fresh adhesive seams during handling – an ideal solution for placement directly after the gluing section of the line. • Allows stacking to an adjustable height, with access from three sides depending on the safety guarding configuration. • The FillMatic MSE designation refers to a series of stacking or folding machines that can be combined or customized according to production requirements. This specific model is a combined version – a mattress core gluer with end-of-line stacking, making it suitable for efficient production and labor savings. The equipment is in good technical condition and ready for immediate deployment in your production process. For more details or if you are interested, please do not hesitate to contact us.

Condition: good (used), mileage: 352,000 km, power: 194 kW (263.77 HP), first registration: 07/1998, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: orange, suspension: steel, total length: 7,100 mm, total width: 2,500 mm, total height: 3,350 mm, loading space volume: 8 m³, Year of construction: 1998, Equipment: differential lock, power assisted steering, = Additional options and accessories = - Leaf spring suspension Fedpfjztdm Esx Albogg - Differential lock - Air horn - Sun visor - Power take-off (PTO) - Central lubrication system = Further information = Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle: Dual tires; Differential lock; Tire tread depth left (inside): 30%; Tire tread depth left (outside): 30%; Tire tread depth right (inside): 30%; Tire tread depth right (outside): 30%; Reduction gear: External planetary axles Number of cylinders: 6 GVWR: 18,000 kg Technical condition: good Optical condition: good

Year of construction: 2021, condition: used, 2021 | Sika AL-264 LMT | Used Small Equipment 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 29500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Concrete blaster 13m3/H , not operationally tested machine looks as it is in working condition 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40944 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Fgsdpfx Alozpalcobsg 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2010, Altendorf F45 Elmo 3-axis control Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Scoring unit: Prepared Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence: electric / position control Fgodpfsy Sbvksx Albsg Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Crosscut fence with mitre function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction port: 80 and 120 mm Duplex mitre fence Year of manufacture: 2010 Price: 15,500.-

Condition: used, Year of construction: 2009, Overview This LM S.p.A. multiline divider is a lane-dividing system for bottle conveying, built in 2009 by LM S.p.A. (Modena, Italy). It sorts a single-lane bottle stream into up to 4 lanes and is offered together with a bottle conveyor system manufactured by GEA Procomac - 4 lanes with each approx. 10m multiline conveyors plus the divider unit. The system is still installed and under power in a German water and soft-drinks bottling plant, remains in production until 30 September 2026, and can be visited in operation. Technical data - Manufacturer of multiline divider: LM S.p.A. (Modena, Italy) - Manufacturer of bottle conveyors: GEA Procomac - Year of manufacture: 2009 - Machine type: multiline divider with bottle conveyor system - Lane division: up to 4 lanes Fgjdpfezuc Rxjx Albog - Capacity: min. 12,500 bottles per hour - Conveyor length: approx. 4 lanes each 10m (multilines) plus divider Scope of delivery - LM S.p.A. multiline divider - GEA Procomac bottle conveyor system - Drive units, guide railings and safety guards as installed Condition The equipment is in very good condition. It is still installed and under power and remains in production until 30 September 2026; operation can be demonstrated on site. Availability Available from 7 October 2026. The equipment will be dismantled and loaded onto the buyer's trucks by the seller between 7 and 10 October 2026. Location: Germany.

Year of construction: 2017, condition: ready for operation (used), Offered for sale is an Optimum toolroom milling machine. Drilling capacity in steel: 30mm, continuous drilling capacity in steel: 25mm, spindle taper: ISO40, quill travel: 120mm, milling head swivel range: +/-45°, cross table X/Y: 1000mm/240mm, max. cross table load: 160kg, X/Y/Z travel: 580mm/200mm/340mm, X-axis table feed: 720mm/min. Including accessories. The tray has been cut open on the right-hand side so that longer workpieces can also be machined. Dimensions X/Y/Z: approx. 2270mm/1500mm/2100mm, weight: approx. 900kg. An on-site inspection is possible. Fgedpfx Aszt Slcelbeg

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Fsdezi Awhjpfx Albsgg Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2023, condition: new, functionality: fully functional, Equipment: type plate available, Tail lift Dhollandia LM.20.08 3 units available Fsdpfswc A S Iex Albsgg New, year of manufacture 2023

Year of construction: 2020, condition: good (used), Used 6-meter straightedge from Pehu Top quality, new price approximately €20,000. Net measuring length: 6000 mm Fjdszgua Nspfx Albegg Also suitable for printing applications. Year of manufacture: 2020

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Equipment: CE marking, cooling unit, documentation/manual, Fiber Laser Cutting System CUT LITE PENTA, Model LME 3015 Year of manufacture: 2021, CE certified Fodpoznk Dtsfx Albjgg Excellent condition. Cutting dimensions: 3000 x 1500 mm Laser source: IPG YLS 6000 W

Year of construction: 1999, condition: used, Saw blade diameter: 300 mm Manual material clamp Fjdpsw Im Trjfx Albjgg Minimum quantity spray device Good condition 120 kg

Condition: like new (used), Year of construction: 2000, operating hours: 7,600 h, functionality: fully functional, *FANUC ROBODRILL T14-iBL DRILL TAP VMC (4 Axis)* Category: Vertical Machining Centers (VMC) Reference No.: 311119 Capacity: 700 X 400 X 330 MM Year of Construction: 2000 Technical Specification: SPINDLE Spindle Taper : BT 30 Spindle Speeds : 8000 RPM Spindle Motor : 3.7 / 5.8 kW WORKING CAPACITY Travels (XYZ) : 700 X 400 X 330 MM Guideways : LM ATC Tool Change Capacity : 14 Tools CNC Control : Fanuc 16iM Fgjdpex Ehi Iefx Albjg Additional Details: With Nikken 170 4th Axis

Condition: like new (used), functionality: fully functional, 3-axis positioning system, rotating, lifting, and pivoting, 7500 kg load capacity. Condition: absolutely like new, only used for measurement purposes. Position can be set using limit switches. Includes hand-held remote control. Faceplate diameter: 1000 mm. Faceplate speed: 1 RPM, including speed controller. Torque: 5500 Nm. Maximum turning radius: 1700 mm. Tilting range: +/- 180° relative to the horizontal faceplate. Tilting moment: 14500 Nm. Tilting speed: 180°/min. Tilting axis: 200 mm above the upper edge of the faceplate. Lifting speed: 1000 mm/min. Lower faceplate height: 500 mm. Upper faceplate height: approx. 2000 mm. Includes complete documentation, plans, operating instructions, and EC declaration of conformity. Fgsdpfx Aozyx Nbjlbjg New price: approx. €75,000.

Year of construction: 1997, condition: used, PILOT EXTRUSION SPINNING LINE POLYESTER MAIN PART WAS DESIGNED BY FOURNE IN 1997 FOR DSM TO MAKE TRIALS OF POLYESTER AND POLYAMIDES, MONO & MULTIFILAMENT. >> EXTRUDER DETAILS : MANUFACTURER : FEP POLYMER YOC : 1997 TYPE : EX 25 - 25 D MAX. THROUGHPUT : CA. 7,0 KG/H (PA6), CA. 5,6 KG/H ( PP ) : CA. 8,2 KG/H ( PET ) NOMINAL SCREW DIA : 25 MM SCREW LENGTH : 25 X D SCREW GEOMETRY : SPECIAL 3-ZONE-SCREW MIXING TORPEDO : CHANGEABLE ATTACHED TO SCREW END , CA 3 X D LONG HEATING CAPACITY : CA. 3,2 KW / 4 ZONES DRIVE : CA. 4,5 KW, AS- MOTOR MIT SCHNECKENGETRIEBE ELECTRICALLY HEATED AND REGULATED TO MAX. 350 ° CELSIUS, EQUIPPED WITH 3 TEMPERATURE CONTROL SENSORS, OVER-TEMPERATURE MONITORING, WATER-COOLED FEED ZONE, REMOVABLE ISOLATION AND BASIC FRAME, INCLUDING INERT GAS IN THE INLET PIPE, EQUIPPED FOR THE SUBSEQUENT RECEPTION OF A TORQUE CLUTCH ON THE GEARBOX END >>> SPINBEAM & MELT PIPE : ELECTRICALLY HEATED SPINBEAM DESIGN : FOR 1 MONFIL OR 2 MULTIFILAMENT THREADLINES SPINPUMPS : 1 = 2 X 2.4CC , 1 = 1 X 2.4 CC , 1 = 1 X 0.6 CC SPINNERETTES : 42 / 59 / 72 >>> QUENCH CABINET : FEP Polymertechnik Gmbh YOC : 1995 TYPE : CROSSFLOW Plant Nr. : 7.1396 >>> WINDER : BARMAG TYPE : SW4S Auftragsnr : 10/0428 YOC : 1988 >>> DRAW – STAND : EDMUND ERDMANN GMBH TYPE : DRAWMOD 02/380-3/5/6 LM YOC : 1995 COM. NR : 13/2492 CONTROLS COMPUTER : EDMUND ERDMANN YOC : 1995 FABR. NR : 132492 >>> PREHEATING OVEN : HERAEAUS Gmbh Type : WU6100 , 500C , 3 Nipe, 400 V 11.4 A, 5.4 kW YOC : 1997 FABR. NR : 97/11055 Fodpszl Hz Nefx Albegg >>> HOIST IN EXTRUDER AREA : HEBEZEUGFABRIK GMBH, YOC : 1998, CAPACITY : 0,7 TONS LIFTING HEIGHT : 0,8 M

Condition: used, mileage: 184,791 km, power: 100 kW (135.96 HP), first registration: 06/2023, fuel type: electric, next inspection (TÜV): 08/2028, color: grey, gearing type: automatic, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), * 11,900 EUR net * Citroën ë-Berlingo 136 hp, 5 seats, 2 sliding doors, air conditioning, parking sensors * Seats: 5 (2+3) * Front, side, and additional airbags * Automatic transmission * Armrest * Electric windows * Electric mirrors * Central locking * On-board computer * Hill-start assist * Cruise control * Heat pump * Bluetooth * Light sensor * Driver fatigue warning * Fog lights * Tire pressure monitoring * Hands-free system * Lumbar support * Distance warning * High beam assist * Emergency brake assist * Speed limiter Fodpfxjzwtx So Albogg * Lane keeping assist * Traction control * Isofix * Air conditioning * USB * 2 sliding doors * ABS * ESP * LED daytime running lights * LED headlights * Rear parking assist (PDC) * Wheelbase 279 cm * Unladen weight 1639 kg * Payload 651 kg * Permissible total weight 90 kg * Passenger car registration * Vehicle no. 59 OPENING HOURS Monday - Friday from 09:00 - 17:00 (by appointment...) CONTACT DETAILS Phone: WhatsApp Email: Transit and customs license plates (export number) available from us. Errors, typos and prior sale are subject to change. Technical specifications and equipment features must be checked separately. The condition as per the contract is only that which is inspected on site at the time of purchase and confirmed in writing. Please arrange an appointment...

Condition: ready for operation (used), Year of construction: 2012, Rated output: 5000bottles/h, running direction: LM, control range: 1000-6500bottles/h, bottle material: PET/glass, bottle format volume: 200ml/250ml/400ml/500ml/750ml/1000ml/1200ml, glass bottle height range: 59mm-121mm, glass bottle diameter: 65mm/70mm, application: neck ring label/body label/back label/wraparound label. Including three self-adhesive dispensers, height adjustment, central lubrication, breakage detection, bottle counter, clamp stars, swivel arm and Etima hot glue for Rollina and neck ring. Documentation available. An on-site inspection is possible. Fodpjy N Dd Ssfx Albogg

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 5,852 h, load capacity: 3,000 kg, lifting height: 6,880 mm, free lift: 2,194 mm, load center: 500 mm, fuel type: electric, mast type: triplex, battery capacity: 625 Ah, battery voltage: 80 V, tire condition: 60 %, overall weight: 4,630 kg, empty load weight: 4,100 kg, total height: 2,974 mm, Equipment: 4th hydraulic function, cabin, lighting, sideshift, Linde E30L electric forklift – with a lifting height of 6.88 meters! Equipment: Load capacity: 3,000 kg Triplex mast Lifting height: 6880 mm Free lift: 1700 mm Overall height: 2980 mm Battery 80 V / 5PzS / 625 Ah Full cab with heating Fgsdezv Siyopfx Albjg Dual pedal Central lever control (LLC) Additional hydraulics for 2 functions / 4 valves Stabilizer attachment. Side shifter and telescopic forks extendable to 2000 mm Solenoid valve for additional functions available 3 LED work lights Superelastic tires Includes battery and charger Inspection possible by appointment. Transportation can be arranged upon request, and loading can be done on-site.

Condition: ready for operation (used), Philips 4022 226 3632 LM / LM DRIVE MOD board, E-Stand: 3 / D, used, in good condition, 100% functional, scope of delivery as per photos. Fgodpfx Asx Et Tholbsg

Condition: excellent (used), RETSCH ZM 200 Ultra Centrifugal Mill with DR 100 Feeder Manufacturer: RETSCH GmbH Type: ZM 200 Machine Type: Ultra Centrifugal Mill / Fine Grinding Mill Accessories: RETSCH DR 100 Feeder For sale is a used RETSCH ZM 200 Ultra Centrifugal Mill with RETSCH DR 100 Feeder and extensive accessories. The ZM 200 is designed for the fine grinding of sample material and is offered together with the DR 100 feeder shown in the images, various sieves, rotors, collection and feed components, and other accessories. Technical data: Manufacturer: RETSCH GmbH Model: ZM 200 Device type: Ultra Centrifugal Mill Power supply: 1~ 200–240 V / 50–60 Hz Power according to nameplate: 1,100 W Current consumption: 12 A Operation: digital control and display panel Interfaces: RS232 / RS485 Connection for DR 100 feeder CE marking Feeder: Manufacturer: RETSCH GmbH Type: DR 100 Device type: Feeder / Vibration Feeder Digital control and display panel Fsdpozxqhyjfx Albegg Start/Stop operation Feed hopper and feed chute as shown in the images Dimensions: ZM 200 (L × W × H): 515 × 410 × 365 mm Equipment: RETSCH DR 100 Feeder Feed hopper Feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container Filling and collection components Filter bag Various RETSCH spare parts and accessories Operating manual ZM 200 Operating manual DR 100 Other accessories as shown in the images Transport data: Dimensions ZM 200 (L × W × H): 515 × 410 × 365 mm Weight: not specified / not determined Transport or shipping possible by arrangement Condition: Used Device shown in operational state. Display and control panel shown in active state. Optical condition as shown in the images. Signs of wear and tear are present. Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 Feeder Feed hopper and feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container and filling components Filter bag Operating manual ZM 200 Operating manual DR 100 Extensive accessories as shown in the images Availability: by arrangement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TD2002/0365, DEMAG KBK overhead crane, span approximately 4x4m – expandable upon request! Load capacity / lifting capacity: 500 KG - 0.5 tons Fodpfx Asztutvjlbsgg Technical data of the system: Overhead crane track made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. Includes Dalmec manipulator PFS 120KG NL Articulating boom, rotatable 360 degrees, with approximately 3m reach The crane is disassembled and immediately available Very good condition, see pictures The item is located in 75053 Gondelsheim Shipping via freight forwarder or collection only by prior appointment Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125KG - 1600KG Please inquire about your overhead crane with the required load capacity and dimensions.

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic optimising end cutting saw PAUL 11 MKL MAXI 5 Premium Year 2006 Input table automatic (throughfeed system) Outut table automatic 6 pcs. kickers on left outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Fgjdpozraaxsfx Albsg Available immediately. CE version. Documentation included.

Condition: used, mileage: 207,359 km, power: 350 kW (475.87 HP), first registration: 08/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * MP5 * Sun visor * ABS (Anti-lock Braking System) * ASR (Anti-Slip Regulation / Traction Control) * ESP (Electronic Stability Program) * Active Brake Assist * Lane Keeping Assist * Radio * Navigation system * On-board computer * Auxiliary heater * Cruise control * Air horns * Hill-start assist * Electric window lifters * Electrically adjustable mirrors * Heated mirrors * Central locking * Fog lights * Driver comfort seat * Seat heating * Cool box * Rear axle differential lock * Top air intake * Roof spoiler * Air dryer * Trailer coupling * 2-line air connection * Duomatik air connection * Lift axle * Driver airbag * Rain sensor * Adaptive cruise control * Right turn assist * Predictive Powertrain Control * Reversing camera * Automatic driving lights * Cornering lights * Sliding roof * Xenon headlights Fsdpfx Aloyvmlrjbogg * Amber beacon Body: Meiller hooklift RS 21.70 for container lengths from 5.5 to 7 m, 21,000 kg lifting capacity, pusher arm, extendable underride guard at the rear, interior controls. ----Chrome Package Interior Sale to businesses/traders only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY EQUIPMENT & ACCESSORIES. All contracts of sale, invoices, proforma invoices, orders, and sales negotiations are based on our General Terms and Conditions (see legal notice/imprint).