Used Liebherr 924 for sale (236)

Condition: used, power: 100 kW (135.96 HP), fuel type: diesel, color: other, Year of construction: 2017, operating hours: 12,235 h, Applicable material: Waste Empty weight: 22.900 kg Make of engine: Liebherr D834 Serial number: 097287 Hnodpfx Ahjw I Ex Tsvji Delivery terms: EXW Please contact Christiaan Dekker for more information Liebherr LH22 M Year: 2017 Hours: 12235 Liebherr sorting grab 4 x Stabilizer Hydraulic lift cabin Central greasing Webasto heating CE Always Liebherr serviced

Condition: excellent (used), power: 400 kW (543.85 HP), operation weight: 90,100 kg, chain condition: 80 %, Year of construction: 2018, operating hours: 9,708 h, LIEBHERR R 976 HD Year: 2018 Hours: 9.708 hrs. Hodpfx Asxhclishvjni Monoboom 7,20 Meter Stick 2,90 Meter V-edge Rockbucket with teeth (RESCH-KA-TEC), cutting width 2,15 Meter, capacity 5.2 cbm, condition 70% good Undercarriage with with double-web shoes 600 Millimeter Condition of the u/c: 80% good Liebherr 8 Zylinder V-Dieselengine, kW/HP 400/544 Central lubrication for the machine and for the slewing ring Rear and side camera Protection grill over the cabine Original Painting Full service machine from Liebherr Recent repairs: New hydraulic oil cooler New high-pressure pump New control unit Operation weight 90.100 KG CE/EPA Technical and optical in a very good condition

Condition: good (used), Year 2003 Processing machine for machining splines and sprockets on crankshafts or shaft-like components Liebherr PC-NC control system for disk cutting wheels in the range 180-300mm for hobbing Vertical machining with straight shaping head and synchronization Clamping in chuck in the machine bed and tailstock as counterholder Integrated ring loader between machining and loading position Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Front screen of the monitor defective, display undamaged after visual inspection Fuse for controls and drives included - free location Availability after consultation, warranty excluded Year of Production:2003 Shaping machine for producing splines and sprockets onto crankshafts and Control Liebherr PC-NC Hodpjt Utdpefx Ahvoni For shaping tooling in range of 180-300mm for Hobbing Vertical machining with straight cutting head and Synchronization Clamping in Jaw on the machine bed and tailstock as counterpart integrated Ring-load between Machining and loading position automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, wheel diameter: 900 mm, workpiece diameter (max.): 150 mm, overall weight: 8,200 kg, rotational speed (max.): 80 rpm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. wheel diameter: 900 mm Max. module: 10 Max. cutter diameter: 190 mm Max. cutter length: 320 mm Cutter speeds (stepless): 13–80 rpm Max. workpiece length: 750 mm Max. workpiece diameter: 150 mm MACHINE DETAILS Hnsdpjxvr Ensfx Ahvei Machine weight approx.: 8,200 kg Note: The arbor for the counter-support is missing.

Condition: good (used), functionality: fully functional, We offer a used Liebherr scraper, semi and fully automatic. Hjdpfx Ahorpmlrovsni Fully functional, with control system.

Condition: used, color: other, Year of construction: 2020, Serial number: 58157 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime.  All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Hnodpfjxxxhuex Ahvsi Discover our wide range of reliable machines. 

Condition: good (used), power: 110 kW (149.56 HP), fuel type: diesel, color: yellow, first registration: 01/2015, Year of construction: 2015, operating hours: 13,739 h, Liebherr A916 - 110 KW - Central Greasing - Camera Year: 2015 Hours: 13,739 110 KW engine Central greasing system Hsdpfx Ajxxavajhveni Camera system = Further information = Model year: 2015 Drive: Wheeled Engine displacement: 4,580 cc GVW: 18,000 kg Technical condition: good Optical condition: good Please contact VAEX The Truck Traders for further information.

Condition: ready for operation (used), Used Liebherr S800 gear hobbing machine, technical data see photos. Hjdpextu Dhofx Ahvoni

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 2018, operating hours: 11,988 h, LIEBHERR LH30M. Year: 2018. Hours: 11,988. Hydraulic cabin. Solid tyres. Four outriggers. 7.80 m industrial boom. 6 m industrial stick. With cylinder for attachments. CE certificate. Very good overall condition. Hedpfoxqztwsx Ahvoni

Condition: ready for operation (used), Specifications Manufacturer LIEBHERR Model LC 502 CNC Year 1984 Condition Used Hnsdpfxexqmbte Ahvji Serial Number 0501/5 Stock Number DCR1746 Max working diameter 500 mm Max module 10 Table Diameter 400 mm Min number of teeth 8 Hob head inclination angle ±50° Hob speed revolution 480 rpm Description Equipment Retrofitted in 2011 CNC Siemens 840D

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm Hnsdpjwzmpzefx Ahvei distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: good (used), Year of construction: 2007, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Liebherr LH 90 table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm Hnjdpfx Ahowzmp Ijvei table hole 320 mm Distance of shafts Min/Max 0-820 power requirement Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1443, table diameter: 180 mm, gear diameter: 200 mm, milling spindle length: 230 mm, spindle speed (max.): 750 rpm, swivel angle A-axis (min.): -45 °, swivel angle A-axis (max.): 45 °, TECHNICAL DETAILS Max. workpiece diameter: 200 mm Table diameter: 180 mm Max. table speed: 100 rpm Center distance: 15 - 400 mm Machine column Hodpjw T Ry Tsfx Ahvoni Max. axial travel: 600 mm Milling head swivel device Milling head swivel angle: ± 45 degrees Milling head Drive power: 27 kW Max. module: 7 mm Max. cutter speed: 750 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Max. tangential travel: 200 mm Max. tangential speed: 3,000 mm/min Counter column Max. counter support travel: 540 mm Max. counter support rapid traverse: 15,000 mm/min Max. counter support arm force: 13 kN MACHINE DETAILS Approximate total weight: 15,000 kg Ambient temperature: 15 - 38 °C Operating voltage (tolerance +/- 10%): 400 V Operating frequency (tolerance +/- 2%): 50 Hz Control voltage: 24 V DC Hydraulics Hydraulic oil: HLP 46 Max. operating pressure: 70 bar Pump flow rate: 24 l/min Hydraulic volume in hydraulic reservoir approx.: 7 l Max. average noise level: 82 dB(A)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0315, workpiece weight (max.): 15 kg, wheel diameter: 80 mm, milling length: 220 mm, workpiece length (max.): 450 mm, TECHNICAL DETAILS Max. workpiece diameter: 80 mm Workpiece weight: 15 kg Workpiece length: -50 mm - 450 mm Machining Max. nominal module for steel: 3 mm Max. milling stroke: 250 mm Hjdpfxjwmbnpe Ahvjni Max. shift travel: 180 mm Table diameter: 145 mm Table speed: 150 rpm Milling head swivel angle: ±45 degrees Cutter-workpiece center distance: 10 mm - 200 mm Milling unit Cutter diameter: 90 mm Cutter length: max. 220 mm Cutter speeds: 1,000 rpm Milling spindle drive power: 15 / 23 kW Table drive power: 5.8 / 19.0 kW MACHINE DETAILS Weight of the machine with counterweight: 10,000 kg Total connected load: 25–35 kVA

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1130, table diameter: 250 mm, wheel diameter: 280 mm, spindle speed (max.): 1,500 rpm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 Table speed range: 100 rpm Table diameter: 250 mm Centre distance: 15 - 285 mm Max. axial travel: 350 mm Milling Head Drive power: 16 kW Min. number of teeth: 4 Cutter speeds: 1,500 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Tangential travel: 200 mm Tangential speed: 3,000 mm/min Swivel angle: ± 45° MACHINE DETAILS Approx. machine weight: 13,000 kg Supply voltage: 400 V Mains frequency: 50 Hz Connected load: 35 kVA Hnedpfx Asw T R Ahohvoi

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1719, wheel diameter: 280 mm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 Hodpow T R Ausfx Ahvoni MACHINE DETAILS Machine weight: 13 t Operating voltage: 400 V Control voltage: 24 V DC

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1191, rotational speed (min.): 4,000 rpm, rotational speed (max.): 10,000 rpm, tool length: 210 mm, TECHNICAL DETAILS Largest workpiece diameter: 180 mm Module range: 1 - 5 Minimum number of millable teeth: 7 Milling head swivel angle: ±35° Resolution accuracy: 0.1 degrees Workpiece table load: 17 kN Tool data Infinitely variable tool speed range: 4,000 - 10,000 rpm Number of tool threads: 1 - 7 Tool diameter for generating grinding: max. 145 mm Tool diameter for form grinding: max. 175 mm Tool length: max. 210 mm Total tool travel in the V-axis: max. 200 mm Shift travel from machine center - plus (+) direction: max. 100 mm Shift travel from machine center - minus (-) direction: max. 100 mm MACHINE DETAILS Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Maximum rated current: 65 A Fuses in the supply line: 80 A Ambient temperature: +15 °C - +38 °C Hjdowmb Amspfx Ahvjni Relative humidity: max. 90% at 20 °C Relative humidity: max. 50% at 38 °C Operating noise: 80 dB(A) EQUIPMENT - With counterholder - No dresser - CBN wheels only

Year of construction: 2020, condition: used, module 4 diameter 180 mm Bore diameter 40 mm Hnsdpfsm Avwzex Ahvoi width 67 mm 5 weight 15 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request

Year of construction: 2020, condition: used, module 10 diameter 180 mm Bore diameter 40 mm width 75 mm 2 Hnedpsm Avwwefx Ahvsi weight 14 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request

Condition: new, Attachment suited for: Construction machines Selling price: € 1.000, US$ 1.053 Dragline Buckets with GALEN Special Design Our Dragline Buckets were shown at BAUMA2019 in LIEBHERR stand. For detailed information, please contact us. Hnedpfx Aophuchohvei

Condition: new, For dragline bucket inquires, please contact us Hnsdpfx Ahsw N D R Djvei

Condition: new, Attachments – Galen Group For high-quality, high-capacity 6-shells grapple attachment manufacturing, Galen Group is your trusted partner. With years of expertise and precision engineering, we deliver durable and efficient attachments designed to meet the most demanding industrial needs. Hnjdpfxsu Shaus Ahvsi Whether for waste management, scrap handling, or heavy-duty material processing, our grapples ensure reliability and performance. Choose Galen for innovation and quality in every product. Contact us today to learn more about our custom solutions tailored to your requirements. The model on the photo is Machine: Liebherr LH60 Capacity: 1.35m3

Year of construction: 2022, condition: new, Attachment suited for: Construction machines Hsdpfx Ahjn Tm E Dovoni Cargo space capacity: 3.200 l Dragline Bucket Manufacturing for every BRAND and MODEL The capacity on the photo is 3.2 m^3 For detailed information, please contact us

Year of construction: 2021, condition: new, Field of application: Construction Empty weight: 1.970 kg Attachment suited for: Loaders Selling price: € 9.750, US$ 10.390 Bucket volume: 3.2 m^3 Type: General Purpose Machine: Liebherr L550 Edge Length: 2700mm Capacity: 3,2m^3 Weight: 1970kg Hnedpfxjphq Dwo Ahvsi Teeth: Metalon 1U-1867 Bolted We manufacture high quality buckets and attachment for all brands. For detailed information, please contact us. The price may change.

Condition: used, Year of construction: 1969, max. wheel diameter 265 mm gear width 45 mm max. module 4 min. module 0,3 max. workpiece diameter 300 mm stroke length max. 0-50 mm stroke position adjustment 25 mm distance work spindle /surface of the table 170/245 mm spindle taper innen MK 4 table-size 180 mm table hole 95/75 mm strokes per minute 450 - 840 total power requirement 10 kW weight of the machine ca. 5200 kg dimensions of the machine ca. m Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every Hedpfx Ahot Hwruovjni cut. With digital display. * Various change gears.