Used Lever Shears for sale (3,179)

Condition: used, functionality: fully functional, Year of construction: 1980, control type: NC control, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 19,000 kg, total length: 4,500 mm, total width: 3,200 mm, total height: 2,900 mm, number of support arms: 2, We are offering a reliable LVD Hydraulic Shear, Model MG-31/16-20, at a very attractive price. Key specifications: • Cutting capacity: Up to 20 mm • Year of manufacture: 1980 • Weight: 19,000 kg • Transport dimensions: 2350 x 4300 mm, height 2900 mm • Location: Slovenia Dodpfxjxg I T Nj Ab Tela This is a solid, proven machine that’s ready for heavy-duty use.

Condition: used, functionality: fully functional, cutting length (max.): 1,000 mm, This manual veneer shear is in very good condition and fully functional. It is currently located in Plankstadt near Heidelberg, but will be relocated to Bisperode near Hameln on 19.07.25, unless sold earlier. Dledpewylhgjfx Ab Tja

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, cutting force: 900 t, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Dsdsxg Ekfopfx Ab Tsla

Condition: used, blade length oben 211/unten 180 mm Dedpfx Aboxbtrme Tjla plate thickness max. 6 mm round bar steel max. 13 mm weight ca. 19 kg Sturdy shears body of quenched and tempered steel. Moving blade guides free of play (with low friction losses), blades of special tool steel, specially hardened and ground. Lever arm with counterweight spring for protection in the event of accidents, all pivot pins adjustable, all models with steplessly adjustable clamping arm. With compound action. Cuts sheet metals and round steel bar. Colour: Red-brown

Condition: good (used), Year of construction: 2011, Used 4-meter guillotine shear from Dener Dodpfx Abowydr Rs Tsla Type: DMMH CNC 41 06 Capacity: 4100 x 6 mm Control: ESA 525 Year of manufacture: 2011 Electric cutting gap adjustment Pneumatic high-support table

Year of construction: 2014, condition: excellent (used), Holzmann TBS 1320 sheet metal shears Holzmann TBS 1320 sheet metal shears Features: - Limiter for precise material setting up to 700mm with a scale, -possibility to set the front stop up to 880mm, - rectangular stop for setting the material on both sides of the working table, -automatic clamp for holding the sheet metal, - easy and friendly work - foot operation. Max. cutting length 1320 mm Dlsdpfx Aegzzwneb Tea Max. sheet thickness 1 mm Working height 800 mm Weight 545 kg

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 3 mm, cutting length (max.): 1,020 mm, Mechanical guillotine shears Fab. SCHRÖDER Typ. MHSU 1020 x 3mm Year 2000 Technical data Make: SCHRÖDER Type: MHSU 1000 x 3mm Year of manufacture: 2000 Sheet width: 1000 mm Sheet thickness: 3 mm Space requirement: LWH approx. 1.40 x 1.50 x 1.30 m Weight: approx. 720 kg Equipment Dlodpfxsulrx Tj Ab Tsa - Manual backgauge - Operating instructions - Cutting edge lighting - Continuous hold-down device with hard rubber strip - Machine feet All specifications without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2000, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 101758, type of input current: three-phase, Complete line of stations: sheet feeder; 2 creasing machines, also suitable for hot creasing; back drilling machine for finger ring; wire ring applicator; riveting machine for lever arch mechanism installation with large-capacity magazine for high volumes; multi-color hot stamping; turner; mechanism lever opening; vibrating system for collecting and positioning compressor bar; compressor bar insertion; compressor bar closing; insertion of corrugated cardboard protective sheet; mechanism lever closing; folding and forming of lever arch file; collection roller conveyor. Plant fully modernized with new hardware and control software in 2020. Operational plant, can be viewed on site. Total length approx. 16 m. Dsdpsxfvd Tofx Ab Tjla

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, EHT hydraulic guillotine shear type TSS 3-40, working width 4100 mm, max. sheet thickness 3.0 mm, pneumatic sheet support device, NC controlled backgauge, support arms, extra set of blades. Dedpow Uf Nrefx Ab Tela

Condition: good (used), for sheet thickness up to: 8 mm flat iron: 80 x 12 mm square iron: 20 mm Dedpstx Uqajfx Ab Tola round iron: 18 mm weight approx.: 88 kg space required: 620 x 250 x 380/880 mm high (with/without base frame)

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Lg.no. 24215 Technical data: - max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - stroke rate up to 34 1/min Dledpstpnldjfx Ab Tea - backgauge with positioning control Pos100 - table height approx. 850 mm - front angle fence - 2 front support arms - Back gauge with light barrier - E- foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - mot. cutting angle adjustment - cutting gap adjustment by scaled adjusting screws - number of hydraulic hold-downs 14 pcs. - motorized backgauge with positioning stop 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per/min - hydraulic drive 400 V / 7,5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - with: - pneum. supported sheet metal support - front angle stop + support arms - Electronic cutting depth adjustment Dledpfjhhc Ixsx Ab Tsa - cutting line illumination - E-foot switch

Year of construction: 1982, condition: good (used), machine/vehicle number: 82-540, Offer 18474 Technical data: - Flat steel shears cuts flat up to 100 x 18 mm - blade length approx. 250 mm - Profile steel shear cuts angles Dljdpeg Eubnjfx Ab Tsa - 90° up to 100 x 10 mm - 45° up to 70 x 8 mm - Bar steel shears cut round steel 90° up to 36 mm - square steel 90° up to 30 mm - Notching device sheets up to 8 mm - Hole punching machine - pressure capacity approx. 50 t - throat 350 mm - punches in steel up to 20 mm Ø in 15 mm - drive 400 V / 3 kW - space requirement approx. W 1100 x H 1700 x D 2300 mm - weight approx. 1900 kg

Year of construction: 1991, condition: good (used), machine/vehicle number: 166, Offer 22014 Technical data: - max. working width 4080 mm - max. cutting capacity St 40 6 mm - hydr. cutting angle adjustment - man. Cutting gap adjustment - stroke rate depending on cutting angle and cutting length approx. 20 - 25 per/min - backgauge with positioning control ELGO 10 - 1000 mm - Cutting length adjustment - 17 pcs. hydraulic hold-downs - front angle stop - front support arms - drive 400 V / 9 kW - foot switch - Space requirement without support arms approx. W 4450 x H 1900 x D 2300 mm - weight approx. 10500 kg Dedpfx Abjh N U Hpo Tjla

Condition: good (used), Year of construction: 1999, machine/vehicle number: 121841, Offer 25317 Djdpfxjxc Ei Hj Ab Tela Technical data: - Max. working width: 2020 mm - Max. material thickness: 3 mm - Strokes per minute: up to 32 1/min - Cutting angle: 2.0° - Motorized backgauge: 5 - 500 mm - Front material chute - Rear area safety guard - Extendable front material support - Electric foot pedal - Single stroke or continuous stroke selectable - Drive: 400 V / 4 kW - Required space: approx. W 2450 x H 1180 x D 2300 mm - Weight: approx. 1300 kg

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.809, Offer 25079 Technical specifications: - Max. working width 3100 mm - Max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1° 30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-down clamps: 14 - Motorized backgauge - Electric foot switch - Front angle stop Dodpfxjv Nkdmj Ab Tjla - Stroke rate 15 per minute - Drive 380 V / 22 kW - Table height 800 mm - Space required including backgauge, without front support arms - Approx. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

Condition: good (used), Year of construction: 2007, machine/vehicle number: 6085074953, Offer 24169 Technical data: - max. working width 4050 mm - max. cutting capacity St 40 13 mm - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 18 pcs Dledpfx Ajtrw Hmsb Toa - Motorized backgauge positioning control 20 - 1000 mm - Front angle fence + support arms - Stroke rate depending on cutting angle and cutting length 7 15 per/min - Hydraulic drive 400 V / 30 kW - Space requirement incl. back gauge, without front support arms - approx. W 5400 x H 2250 x D 2250 mm - Weight approx. 16000 kg - with: - electric foot - switch - cutting line lighting - - cutting length preselection - rear of machine with light barrier safety device

Condition: used, Year of construction: 1980, machine/vehicle number: xxxx, Lg.no. 24211 Technical data approx: - max. working width 1020 mm - max. material thickness at 40 kg/mm² strength 1.5 mm - man. back gauge adjustable up to 550 mm - front angle stop - sheet hold-down device - Table size 1100 x 650 mm - Working height 900 mm - Space requirement approx. W 1800 x H 1450 x D 850 mm - Weight approx. 400 kg Dlsdet H I Aqspfx Ab Tsa - mobile

Condition: good (used), Year of construction: 2001, machine/vehicle number: 443954701005, Offer 25086 Hydraulic profile and bar steel shears with notching device and hole punch Technical specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Section steel shears Djdpfjv I Sxvjx Ab Tola - L- and T-bars at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notcher - With square notcher for sheets up to approx. 13 mm - Notching depth approx. 70 mm - Notching width approx. 52 mm - Hole punch - Punching force approx. 100 t - Throat 510 mm - Stroke approx. 10 to 50 mm - Punches in steel up to Ø 31 mm in 25 mm - Electric contact stop - Various 10 punching dies + Dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Condition: good (used), Offer 23477 Hydr. flat profile and bar steel shears and hole punch Technical data: - Flat steel shears cut up to 350 x 12 mm - Steel section shears - cuts L-steel 90° up to 100 x 10 mm - Steel bar shears - cuts round steel up to 32 mm - Notching device - Rectangular notcher 50 x 90 mm - Hole punch - punching force 550 KN - with stop table - throat depth 220 mm - punches holes in steel up to 32 Ø in 12 mm Dedpfx Asra Avdob Tola - Coordinate table - manual stop - E. foot switch - Drive 400 V / 2.2 kW - Space requirement approx. W 900 x H 1750 x D 1700 mm - Weight approx. 1200 kg

Condition: good (used), Year of construction: 1970, machine/vehicle number: 30740, Offer 23465 Technical data: - max. working width 1040 mm - max. material thickness (at 40 kg strength) 3.5 mm - Table width 300 mm - stand projection 100 mm - working height 880 mm - Front angle stop - 3 additional front support arms - Back fence manually adjustable 5 - 550 mm - Drive 400 V / 5.5 kW Dsdpfxsrci T Eo Ab Tela - E. foot switch - Space requirement including back gauge, without front support arms - approx. W 1500 x H 1250 x D 1400 mm - Weight approx. 1400 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 118, Offer 24176 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6.5 mm - Cutting angle hydr. adjustable 0.3 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 18 pcs - Motorized back gauge 20 - 1000 mm - Front angle fence + support arms - Stroke rate depending on cutting angle and cutting length 7 - 17 per/min - Hydraulic drive 400 V / 11 kW - Table height approx. 800 mm - Space requirement incl. back gauge, without front support arms Dsdpfjtq S Sgjx Ab Tsla - approx. W 4000 x H 1700 x D 2250 mm - Weight approx. 4800 kg - with: - electric foot - switch - Cutting line illumination - Cutting length preselection via potentiometer

Condition: good (used), Year of construction: 1987, machine/vehicle number: 475-87, Offer 24206 Technical data: - max. working width 2030 mm - max. material thickness at 40 kg/mm² strength 1.25 mm - Backgauge - Space requirement approx. W 2250 x H 1050 x D 750 mm - Weight approx. 700 kg Dljdotyvlbopfx Ab Tea

Condition: used, Year of construction: 1992, machine/vehicle number: A20533, Offer 25199 Dljdpfx Abowtz She Tea Technical data: - max. working width: 3050 mm - max. cutting capacity St 40: 12 mm - electrically adjustable cutting angle: 0.5 - 3° - manual blade gap adjustment - number of hydraulic hold-downs: 18 pcs - motorized back gauge: 10 - 1000 mm - front angle stop - number of strokes depending on cutting angle and length: 7 - 17 per minute - hydraulic drive: 400 V / 22.5 kW - table height: 770 mm - space requirement approx.: W 4100 x H 2030 x D 2030 mm - weight approx.: 8500 kg - with: - electric foot switch - cutting line illumination - rear safety device with light barrier

Year of construction: 1996, condition: good (used), machine/vehicle number: 9605075, Offer 22537 Technical data: - max. working width 4040 mm - max. cutting capacity St 40 6 mm - cutting angle hydr.adjustable 0,5 - 3 °. - cutting gap adjustment hydr. - number of hydraulic hold-downs 22 pcs. - motorized backgauge with positioning control 10 - 1000 mm - front angle stop + support arms - stroke rate depending on cutting angle and cutting length 7 - 15 per/min - hydraulic drive 400 V / 7,5 kW - pneumatic connection 6 bar - table height 770 mm - space requirement approx. W 5100 x H 2250 x D 2150 mm - weight approx. 9000 kg - with: - E-foot switch - cutting line illumination Dodpsimq A Iofx Ab Tjla - Sheet metal elevation pneumatically supported