Used Lead Screw Lathe for sale (11,041)

Condition: used, Year of construction: 2018, functionality: fully functional, turning diameter: 1,000 mm, turning diameter over bed slide: 710 mm, turning length: 8,000 mm, Used heavy-duty lathe with extensive steady rest equipment – ideal for pipe machining and long rolls! This robust conventional lathe with an impressive turning length of 8,000 mm was specifically designed for pipe machining applications. The sophisticated machine design allows the cutting edge to easily pass the open steady rests – ideal for precise machining of long, hollow workpieces. Technical Highlights: • Turning diameter over bed: 1,000 mm • Turning diameter over support: 710 mm Giedpfxsv Tntte An Rot • Center height: 900 mm • Turning length: 8,000 mm • Spindle bore: 155 mm • Machine weight: approx. 18.2 tons • Main drive: 30 kW with frequency converter, continuously variable Design advantages: • Machine bed cast in one piece and artificially aged – for maximum stability and stress-free operation • 5 hardened and ground guideways for maximum precision • Continuous feed control of the longitudinal axis via ball screw – no Norton or lock-box gearing • Electric-driven tailstock with hydraulic clamping • Manually adjustable cross support with trapezoidal thread spindle • 4-station tool carrier, manually pivoting • Triple-guided turning support – for extremely smooth running Steady rests & tube processing: • Various steady rests (stationary and follow-on) optional Available • Motorized steady rest carriers with hydraulic clamping • Spindle adjustment conveniently possible from the operator's side • Traveling steady rests can be mounted either on the left or right Application: Thanks to its sophisticated design, the machine is ideally suited for light to medium-duty machining – especially for the precise machining of tubes. The continuously variable speed and feed control ensures high flexibility and ease of use.

Condition: new, Year of construction: 2025, turning diameter: 542 mm, turning diameter over bed slide: 542 mm, turning length: 1,500 mm, quill diameter: 80 mm, spindle speed (min.): 1,500 rpm, Specifications: Height of centers: 271 mm Swing over bed: Ø542 mm Swing in gap: Ø730 mm Swing over cross slide: Ø387 mm Distance between centers: 1500 mm Bed width: 320 mm Spindle nose, Camlock taper: D1-8, Ø85 mm Taper 1/19.18 Spindle center sleeve: Ø85 mm Taper 1/19.18 x MT No.5 Spindle bore: 80 mm Spindle speeds: 26–1500 rpm Cross slide travel: 300 mm Main spindle: 10 HP (7.5 kW) Coolant pump Weight: 2000 kg Standard scope of delivery includes: Self-centering chuck 250 mm Multifix quick-change tool post Dead center MT.5 Gijdew U Uqlopfx An Rjt Dead center MT.4 with carbide tip Spindle center sleeve Ø85 mm Taper 1/19.18 Leveling pads, 6 pcs Tool set and box Operation manual & parts list Full-length splash guard Halogen work lamp Chuck safety guards Electrical system conforming to CE Steady rest with ball bearing Follow rest with bronze tip Leadscrew safety cover (CE compliant)

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 308888, turning diameter over cross slide: 210 mm, spindle bore: 40 mm, turning diameter over bed slide: 300 mm, turning length: 1,000 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 40 rpm, Turning diameter in gap: 480 mm, tailstock quill diameter: 42 mm, tailstock quill stroke: 110 mm, - With ACU-RITE manufacturer digital display - With tailstock, Multifix quick-change tool holder, and three-jaw chuck (Ø 150 mm) Gjdpfx Ajwxratsn Rjit - Width in front of faceplate: 115 mm - Lead screw diameter: 28 mm - Thread: 6 mm - Feed (16 metric): 0.03 – 2 mm/rev - Cross slide width: 140 mm – travel: 190 mm - Top slide width: 82 mm – travel: 92 mm - Tool holder: 16 x 20 mm

Condition: not inspected (used), Year of construction: 1977, functionality: unexamined, machine/vehicle number: 218758, spindle bore: 53 mm, turning diameter: 520 mm, turning diameter over bed slide: 320 mm, turning length: 1,500 mm, spindle speed (max.): 2,800 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle bore: 53 mm Turning diameter: 520 mm Swing over bed slide: 320 mm Turning length: 1,500 mm Spindle speed: 31 - 2,800 rpm MACHINE DETAILS Overall length: 4,000 mm Gijdpfx Anowvi Rds Rst Overall width: 1,500 mm Overall height: 1,800 mm Total weight: 1,500 kg EQUIPMENT - Tailstock - Multifix tool holder

Condition: not inspected (used), Year of construction: 1980, functionality: unexamined, machine/vehicle number: C20018, spindle bore: 53 mm, turning diameter: 460 mm, turning diameter over bed slide: 240 mm, turning length: 1,000 mm, spindle speed (max.): 2,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle bore: 53 mm Turning diameter: 460 mm Swing over cross slide: 240 mm Turning length: 1,000 mm Speed range: 32 – 2,000 rpm MACHINE DETAILS Overall length: 2,200 mm Gijdpfx Ajw Ngqysn Rjt Overall width: 1,000 mm Overall height: 1,300 mm EQUIPMENT - Tailstock - Four-jaw chuck, diameter: 200 mm

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 6970-06, turning diameter: 480 mm, turning diameter over top slide: 240 mm, center height: 240 mm, turning length: 1,000 mm, spindle speed (max.): 2,240 rpm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Submitting a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Turning diameter: 480 mm Swing diameter over cross slide: 240 mm Turning length: 1,000 mm Spindle bore: approx. 63 mm Spindle speed: 11–2,240 rpm Gjdpoxm Sizjfx An Roit Centre height above bed: 240 mm Centre height above carriage: 140 mm Turning diameter over carriage: 240 mm MACHINE DETAILS Electrical Data Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,200 x 1,800 mm Weight: 3,000 kg EQUIPMENT Tailstock Steady rest Toolpost Four-jaw chuck, diameter 250 mm Three-jaw chuck, diameter 250 mm Three-axis digital readout Various tool holders Centres Taper

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Giedpsvivmysfx An Rot Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Weiler Praktikant VCD Precision Lead and Feed Screw Lathe with 3-axis Digital Readout, Infinitely Variable Speed, As-new Condition, Year of Manufacture 2019 Technical Data: >> Year of manufacture: 2019 Machine no. OD08 >> Centre height: 160 mm >> Swing over bed: 320 mm >> Swing over cross slide: 190 mm >> Distance between centres: 650 mm >> Spindle speeds: 30 to 4000 rpm (infinitely variable) >> Spindle bore: 43 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MK 3 >> Number of feeds: 24 >> Longitudinal feed: 0.02 to 0.63 mm/rev >> Cross feed: 0.006 to 0.2 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 1150 kg >> Spindle brake >> Dimensions (LxHxD): approx. 1.72 m x 1.7 m x 0.89 m Accessories and Equipment: >> Weiler digital readout >> New collet chuck system; new collets from 3 to 26 mm >> 160 mm 3-jaw chuck with 1 set of jaws >> Multifix size B with 3 tool holders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts plan Safety Features: >> Lockable main switch Godow Swkvepfx An Reit >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of the relevant handwheel when feed is engaged VCplus Digital Readout: >> 8-inch color screen >> 3 axes for bed, cross slide and compound slide >> 99 tool memory locations >> Oriented spindle stop >> Input for constant speed or cutting speed >> Feed rate and thread settings displayed >> Thread cutting with electronic stop About the machine: Offered here is a Weiler Praktikant VCD Precision Lead and Feed Screw Lathe with 3-axis digital readout. Year of manufacture 2019, in as-new condition with original paint. The machine is, of course, fully functional and equipped with new collets and chuck. You are welcome to inspect the machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Godpfsxcuazjx An Reit Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Precision Lathe Model Condor 81 Lead and Feed Spindle Lathe with 3-Axis Digital Display from K&C NEW Technical Data: >> Year of manufacture 1987 Machine No. 87 835 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral-Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: Giodpowrmuxofx An Rot >> 3-axis digital display from K&C new, 12 months manufacturer's warranty with operating manual Functions: Switch mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming 200 pcs, taper calculation, radius/diameter, quick zeroing, reversing of count direction >> 1 piece 3-jaw chuck 160 mm NEW, 2 sets of jaws >> 1 piece 4-jaw chuck 160 mm, 1 set of jaws >> Collet equipment and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet About the Machine: A used Weiler Condor 81 in very good condition is offered. The machine is, of course, fully functional and has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine on site under power.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws Gijdow Nw Dqepfx An Ret >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard >> Rear splash guard >> Fixed steady rest >> Machine feet Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws Godpfsu Aftgjx An Roit >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 Gijdjvtp Edjpfx An Rot >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 6414.21, turning diameter over cross slide: 420 mm, spindle bore: 64 mm, turning diameter: 420 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 210 mm, center height: 210 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 140 mm, quill diameter: 60 mm, total length: 2,150 mm, total width: 1,150 mm, total height: 1,700 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 1 rpm, Equipment: rotational speed infinitely variable, The machine is faultless and has had no previous repairs, with very low operating hours. The lathe can be operated both conventionally and via servo drives. The control system allows programming via DIN commands, making it ideal for small batches and training. Gsdpfx Ajwcdhden Rjit Sale due to misjudgment of the required technology: we have a growing need for a CAD/CAM-programmable cycle lathe. Please refer to the photos/description for the type, model, year of manufacture, and operating hours. Price: €50,000 (negotiable) based on a new price of approximately €76,000. Transport of the machine is not included in the price and is subject to negotiation. The center shown in most photos is not included in the offer; it is listed in the accessories list! Extensive accessories are listed in the Word document. The machine is available for immediate sale.

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 20161259/2017, Filling system for all liquids. The system was used to fill disinfectant bottles. The system was put into operation in 2017 and is still as good as new, having only been in operation for a few hundred hours. The article produced was only sold during Corona. Gsdpjvmnkrsfx An Rjit It is also possible to purchase the complete product. Unfortunately there are only a few photos, but we would be happy to send you a video of the system in operation.

Condition: excellent (used), Year of construction: 1992, Weiler Condor 81 Weiler Condor 81 lathe with Heidenhain digital display, year of manufacture 1992, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Year of manufacture: 2003 Engine lathe WEILER type Condor 81 Distance between centers: 750 mm Swing over bed: 330 mm Center height over bed: 165 mm Swing over cross slide: 180 mm Center height over cross slide: 90 mm Spindle bore: 40 mm Chuck fitting: short taper DIN 55027 size 5 Tailstock quill taper: MK 3 Quill travel: 110 mm Spindle speed: 45 – 2800 rpm, 16 steps Drive power: 3 kW Power supply: 400 Volt, 50 Hz Spindle speeds via 16-speed gearbox Required space (L x W x H): 1850 x 950 x 1400 mm Weight: 1,100 kg Gisdpfx Asw T U Sgjn Rjt Accessories and equipment: Röhm 3-jaw chuck Multifix quick-change toolpost Coolant installation Heidenhain digital readout About the machine: We offer a Weiler Condor 81 lathe with Heidenhain digital display, year 1992, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs very quietly. This newer generation of lathes is very user-friendly and can achieve ground-like finishes. Take the opportunity to inspect this machine under power at our location and see its condition for yourself. You can find more lathes from renowned manufacturers on our website.

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, quill stroke: 85 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,500 mm, Ladies and Gentlemen, We are selling a Weiler Praktikant 160B lathe with 3-axis digital readout. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Center height: 160mm Center width: 650mm Spindle clearance: Ø 40mm Tailstock taper mount: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Giodpfx Aou H U S Hen Rot Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: good (used), Year of construction: 1991, machine/vehicle number: DO-JAO-011, Offer 24306 Technical data: - Center height 175 mm - Turning diameter 330 mm - Center distance 800 mm - Spindle holder according to DIN - Spindle bore 46 mm - Taper of the tailstock quill MK 3 - Travel of the tailstock quill 120 mm - Spindle speeds 6.3 - 2500 rpm - Longitudinal + flat feeds - Drive 400 V / 6 kW Gedpfx Anot H I Uyo Roit - with: - 3-jaw chuck - SWS steel holder with 1 insert - chip tray - coolant device - lighting - Space requirement approx. W 1850 x H 1750 x D 990 mm - Weight approx. 850 kg

Condition: new, Year of construction: 2025, turning diameter over cross slide: 270 mm, spindle bore: 58 mm, turning diameter: 460 mm, center height: 230 mm, center width: 1,060 mm, quill stroke: 130 mm, quill diameter: 60 mm, total length: 2,280 mm, total width: 1,150 mm, total height: 1,650 mm, Turning diameter in gap: 690 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 25 rpm, overall weight: 1,910 kg, quill mount: MK 4, metric thread pitch (max.): 14 mm, tailstock quill diameter: 60 mm, Optimum TH 4610D center lathe with DPA 31 Plus digital position indicator and quick-change tool post Hardened and ground Z-axis guideway Guaranteed spindle nose concentricity ≤ 0.015 mm Shafts, gears, and main spindle run in an oil bath Lead screw cover Precisely machined slide All guideways adjustable via V-ledges Mechanical longitudinal feed shutoff of the bed slide with four adjustable eccentrics Right/left rotation on the bed slide can be switched via a switch spindle Central lubrication in the bed slide Top slide adjustment range ± 90° Smooth-running, hardened, and ground gears mounted on two adjustable precision tapered roller bearings Switch with life cycle calculation, tested according to EN ISO 13849 Large chip guard with integrated LED Machine lamp Handwheels with adjustable fine scales of 0.04 / 0.02 mm Safety handwheels with disengagement function according to EN23125 on the X and Z axes Quick-action feed gears in a closed design, gears and shafts hardened and ground, running in an oil bath on precision bearings Adjustable thread dial scale Tailstock for taper turning adjustable ± 10 mm Tailstock sleeve and handwheel with adjustable fine scale of 0.025 mm Quick, easy, and tool-free adjustment of the tailstock using a clamping lever Cable routing via energy chain Heavily ribbed prismatic bed, induction-hardened and precision-ground from gray cast iron Gedpfx Anewaaf Hj Roit Coolant system with separate coolant tank with level indicator and oil separator; Easy and complete emptying and cleaning according to DIN standards Emergency stop device with foot operation Scope of delivery: Fixed steady rest, opening Ø 25 - Ø 178 mm Revolving steady rest, opening Ø 19 - Ø 114 mm LED machine light Adapter MK6-MK4 Non-revolving center MK4 Non-revolving, but temperature-resistant center MK4 Quick-change tool holder SWH 5-B Tool holder 25 x 120 Type D for 20 mm square chisel Thread gauge Set of interchangeable gears Gears for thread gauge (metric) Initial machine filling with high-quality oil Operating tools Options available upon request; we will be happy to advise you: - Three-jaw chuck / four-jaw chuck - Steel reamer / turning tool - Mounting elements - Commissioning Do you need a different machine? Please contact us!

Condition: reconditioned (used), functionality: fully functional, center height: 160 mm, center width: 650 mm, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a Weiler Primus VC / Praktikant VC lathe. This model series is particularly distinguished by its Siemens control panel and completely stepless speed control. As the name suggests, the VC can operate at a constant cutting speed. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160 mm Center distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper mount: MT3 Quill stroke: 85 mm Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Gsdpfxjwhx I Ne An Rsit Weight: approx. 750 kg Other equipment and accessories: Siemens control panel, coolant system, chuck guard, lead screw and feed screw covers, 2 emergency stops, operating instructions, CE declaration of conformity, and much more upon request... Our service promise to you: - We are a certified master craftsman in the field of mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts will be replaced in advance. - Upon request, we can fully or partially overhaul the selected machine. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools, etc. directly. - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery.

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Dimensions and weights: Length (product): approx.1760mm Width/depth (product): approx.745mm Height (product): approx.1320mm Weight (net): approx.469kg Max. height (product): approx.1590 (DPA)mm Working ranges: Center height: 165mm Center width: 1000mm Rotation diameter over machine bed: 330mm Swing diameter over cross slide: 216mm Bed width: 190mm Gedpfx Asq T R Aajn Rsit Speed range: Number of speed ranges: 9 steps Speed range: 65 - 2000min¯¹ Electrical data: Drive motor power: 1.5kW Supply voltage: 400V Mains frequency: 50Hz Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 4 Spindle bore/bar passage: Diameter 38mm Steel holder max. mounting height: 16mm Spindle cone: MK 5 Tailstock: Tailstock holder:MK 3 Tailstock quill stroke: 100mm Tailstock quill diameter: 38mm Pitch: Pitch metric: 0.4 - 10mm/rev Number of leads metric: 29 Pitch inch: 56 - 4Gg/1" Travel distance: Top slide travel: 90mm Travel of face slide: 168mm Bed slide travel: 850mm Feed rate: Feed range longitudinal:0.02 - 0.4mm/rev Number of longitudinal feeds: 24 Feed range flat: 0.01 - 0.2mm/rev Number of feeds flat: 32

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.3265mm Width/depth (product): approx.1065mm Height (product): approx.1550mm Weight (net): approx.1965kg Working ranges: Center height: 230mm Center width: 2060mm Circumferential diameter over machine bed: 460mm Circumferential diameter in the bed bridge: 690mm Swing diameter over cross slide: 270mm Turning length in the bed bridge: 240mm Bed width: 300mm Speed range: Number of speed ranges: 12 Speed range: 25 - 2000min¯¹ Electrical data: Power drive motor5.5kW Supply voltage400V Mains frequency50Hz Cooling lubricant system Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar passage diameter: 58mm Steel holder max. mounting height: 25mm Spindle cone: MK 6 Tailstock: Tailstock holder: MK 4 Tailstock quill stroke: 130mm Giodpfx Ansq Ukbpj Rst Tailstock quill diameter: 60mm Pitch: Pitch metric:0.1 - 14mm/rev Number of leads metric: 41 Pitch inch: 112 - 2Gg/1" Number of pitches inch:41 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches:34 Travel distance: Top slide travel: 125mm Travel of face slide: 285mm Bed slide travel: 1805mm Feed rate: Feed range longitudinal: 0.031 - 1.7mm/rev Number of longitudinal feeds: 42 Feed range flat: 0.014 - 0.784mm/rev Number of feeds flat: 42 Electrical connection: Total connected load: 5.8kW

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Capacity : 210 - 370 mm 365 - 520 mm Giedpou Tvdbjfx An Rjt Only available as a set

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Technical data: Gedpfx Anov Hckgs Rjit - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm - Spindle bore 36 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm - Drive 400 V / 5.8 kW - With: - Tailstock, 3-jaw chuck, steady rest - Steel holder, live center, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Giodod I A Auspfx An Rot Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm