Used Launch Diagnostics Device for sale (11,452)

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 24-month warranty Stainless steel model Advantages: + Excellent price-performance ratio + Simple and quick installation and operation + Housing made entirely of stainless steel + Can also be combined with an ice water system, if desired Crodpfx Aksivdxmeboc + Unit automatically opens the required water supply, providing hot/chilled water + Dispenses the correct mixture until the desired temperature is reached + Powerful electronic system based on a microprocessor + Water dosage from 0.1 to 99.9 liters or 1 to 999 liters + Temperature fluctuations are automatically compensated + Digital display of water temperature and quantity + Temperature is adjusted with a thermostatic mixing valve (rotary knob) + Fast supply of spare parts within 1-2 working days STANDARD accessories, included in the price: - 1x Drain hose (2 meters long) with hanging hook Technical data: - Dosage volume: 0.1 - 99.9 liters or 1 - 999 liters - Temperature range: 0°C to +40°C (depending on water supply) - Power: 25 W - Water pressure: 2 - 4 bar (recommended) - Connection values: 230 V - 1 phase - 50/60 Hz - Dimensions: 305 x 120 x 390 mm (W x D x H) - Net weight: 6.8 kg

Year of construction: 2002, condition: good (used), Make: HAEUSLER Type: Crocodile Year: 2002 Specifications Metric US Standard Min. shell inner diameter 1500 Cjdpokwcnzjfx Akbsrc Max. shell inner diameter 6000 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 20 mm Maximium wall thickness 70 mm Max. section weight 30 T Max. weight total workpiece 120 T Dimensions (Estimate) Length 60000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2007, condition: good (used), Make: HAEUSLER Type: Clamp Year: 2007 Specifications Metric US Standard Min. shell inner diameter 1800 Max. shell inner diameter 5500 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 10 mm Maximium wall thickness 40 mm Max. section weight 15 T Max. weight total workpiece 60 T Dimensions (Estimate) Length 24000 mm Width 6000 mm Height 3200 mm Weight 0 kg Credpfjkwcn Esx Akbec Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, length 5000 mm width 1150 mm depth 2000 mm There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Crodpfxeyqvxve Akbec If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2007, condition: used, functionality: fully functional, The used WEMA WTD 35/M9 hot runner control system is a precise hot runner temperature control unit, specifically designed for use in plastics processing (injection molding). It is used to precisely control the temperature in hot runner nozzles or manifolds, ensuring consistent melt quality. Cedpfxsy Tmtde Akbsrc Data: 9 control circuits, each with 3,300 watts 230 volts 16 amps Microprocessor-controlled On the rear, each with 1 x 24-pole multi-plug base for power and thermocouples For sale to businesses only, without warranty.

Condition: good (used), Cartridge holder with shut-off valve Application: Butyl extruder Width: 450 mm Diameter: 80 mm Weight: 2.6 kg Condition: good, second-hand Cedpfoy Tk Tnjx Akbjrc

Condition: used, For sale is a high-quality TESA Micro-Hite 3D height gauge in a large, motorized version, offered as a complete measuring workstation. This system combines precise height measurement with extended 2D/3D coordinate functions, making it ideal for use in quality assurance, metrology, and production. Of particular note is the extensive range of accessories, as well as the existing PC connection with printing capability, which allows measurement reports to be created and documented directly. Cedsy Tkg Uepfx Akbjrc Technical specifications: Manufacturer: TESA (Switzerland) Model: Micro-Hite 3D Type: Height gauge / 3D-capable measuring column Measuring range: approx. 600 mm (large version) Resolution: up to 0.0001 mm (0.1 µm) Drive: motorized adjustment Measuring system: digital / electronic Data output: interfaces for PC/peripherals Measuring functions: Height measurement Internal and external measurement Diameter determination Distance measurement 2D/3D point measurement Geometry and position calculations Equipment: Granite measuring plate Stable machine base Motorized measuring column Integrated control unit External PC workstation (monitor, computer, input devices) Printer for report output Accessories: Extensive set of measuring probes (ruby tips, extensions, etc.) Tool holders Accessories case / wooden box

Condition: used, functionality: fully functional, Clamping block for SK 40 tools Crjdpfxsyuwzme Akbsc The metal plate is labeled Lorenz Ettlingen 7-191-020-0001 For securely clamping tool holders with SK40 during tool changes – tool clamping E.g., as an accessory for Lorenz gear hobbing machines – slotting machines. Clamping vice / mounting table / clamping cube. Clamping device for secure fixation and clamping. Clamping tower – tool change device Suitable for 4 pcs. SK 40 tool holders Price / details on request All technical data subject to errors and misprints. We sell exclusively to countries within the European Union.

Condition: good (used), functionality: fully functional, Tooth-setting device for bandsaw blades Cedpsyki Hgofx Akborc

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: D5830, operating hours: 381 h, 2016 Rowa Vmax Pharmacy Robot The system is in perfect working order. It has barely been used, as our many different packaging options are not suitable for such a storage system. The system is operational and in top condition with very low mileage. The last service was performed today, and there is no maintenance backlog. Further information available upon request. Crjdpfxewccnps Akbec

Condition: excellent (used), We offer you: Embossing device for achieving form-fit connections Manufacturer: HWR Type: SOLIDStamp Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale! Credpjw Ra Hqofx Akbsc

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 Crsdpjxqxw Tjfx Akbsc - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S Crodpsxqxt Isfx Akbsc The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: used, functionality: fully functional, Hydac FCU2210 Fluid Control Unit Hydraulic Service Unit with Accessories Cjdjv I Tdgepfx Akbjrc # 7044

Year of construction: 2020, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BV200219443, 🔥 Pyrolytic Cleaning of Screws – DEMO Unit | up to Ø70 mm | Fully Automatic | 12 months warranty Efficient and safe solution for removing polymer residues from screws used in extrusion and injection molding – no deformation, no manual cleaning required. Completely made in the European Union. _____ Key Features • Suitable for all thermoplastic materials Codey Id Tqjpfx Akbjrc • Max. screw diameter: Ø70 mm • Vertical process – no screw deformation • Fully automatic operation (no operator required) • Cleaning time: 3–8 hours (depending on contamination) • Process temperature: 400–500 °C • Integrated gas treatment system with water tank and pump _____ Technical Data (Type PC-70) • Max. screw diameter: 70 mm • Max. screw length: 2,450 mm • Max. working height: 3,200 mm • Total power input: 25 kW _____ Condition • DEMO unit – directly from manufacturer • Excellent condition with full 12 month factory warranty. • Available immediately FCA BOCO price: 27 990,- EUR w/o VAT _____ Manufacturer BOCO Pardubice Machines, s.r.o. (Czech Republic) Over 30 years of experience in plastics processing technology

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Cjdpfx Asy N Dvbskbsrc Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6,000 rpm Power supply: 230 Volt, 50 Hz - The feeder was used for feeding automotive blade fuses Installation space required Ø x H: 420 x 390 mm Weight: 52 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which causes the sorting bowl to vibrate by mechanical oscillations, setting the parts in motion.

Condition: used, height 1600 mm width 600 mm depth 750 mm thread M 20 There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Cedpfxey Swh Ae Akberc About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, height 2800 mm width 900 mm depth 1200 mm thread M 24 There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Crsdpfxjy Swg Se Akbjc About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, height 2400 mm width 750 mm depth 1000 mm thread M 20 There are 2 brackets. The dimensions refer to 1 angle. Crjdey Swg Eepfx Akbsc The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Edge trimming machine Crsdewiwnqjpfx Akbjc Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: excellent (used), Knife edge honing device REFORM Csdpfjyidtpex Akborc

Year of construction: 2009, condition: used, For sale is our welding system from AEF Hauzenberg. This is an electrode welding system. Inside the unit, there are three zones where welding processes can be carried out simultaneously. The system is equipped with a control cabinet featuring a PLC, allowing the process parameters of the welding operation to be set. We used Silfos (AG) brazing alloy. Included in the delivery is also a water chiller from Habor, model HWK-1000PTSB2. Crsdpsy Skq Refx Akbsc

Year of construction: 2026, condition: used, NEU, Baujahr 2026 Automatische Be- und Entladestation. Geeignet für Holz, MDF, Massivholz, Gipskartonplatten, Zementfaserplatten und Bretter. Beispiele: Türen, Bretter, MDF-Platten, Schrankfronten, Gipskartonplatten und Fassadenplatten. Anpassungen für andere Produkte sind möglich. Die Maschine arbeitet mit konstanter Geschwindigkeit und Crodpfxoy Iv N Rj Akboc einer festgelegten Be- und Entladekapazität. So können Sie Ihre Be- und Entladevorgänge einfach automatisieren und die Prozesssicherheit erhöhen. Das System arbeitet mit einem 2-Kreis-Vakuumsystem. Siemens-BedienfeldTechnische Daten: - Arbeitsbreite 1.300 mm. - Inklusive Förderband, Länge 3.400 mm - Arbeitshöhe 930 ± 20 mm - SPS-Steuerung, Bedienung über Touchpanel, Siemens S7-1200 - 2-Kreis-Vakuumsystem - Be- und Entladen von Teilen über Vakuumsauggreifer - Spezielle Sauggreifer mit Positionsverstellung - 4 zusätzliche Sauggreifer zum Anheben der Platten um 15 mm auf einer Seite vor der vertikalen Bewegung. - Automatisches Signal bei Abschluss des Beladevorgangs - Max. horizontale Geschwindigkeit: 0,5 m/s - Horizontaler Arbeitshub: 1.300 mm - Max. vertikale Geschwindigkeit: 0,5 m/s - Stapelhöhe ca. 1.000 mm (inklusive Palette unter dem Plattenstapel) - Beladeseite links in Fahrtrichtung - Vertikaler Arbeitshub: ca. 1.200 mm - Max. Tragkraft: ca. 100 kg, Dauerbetrieb 85 kg - Max. Bauteilbreite: 1.300 mm - Max. Bauteilänge: ca. 3.050 mm - Max. Förderbandgeschwindigkeit: stufenlos einstellbar bis max. 10 m/min. - Elektromotorleistung: 1,5 kW

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Cedpfxox A Ia Is Akberc

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Cedpfxsxn Ax Ae Akberc