Used Lathe Machine Heavy for sale (66,825)

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a HAGER HDG 250 lathe in mint condition with a center width of 1,000 mm. The exhibition machine is in original condition, therefore you have the full warranty. Crodpfotpnykex Ailed Technical data - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) safety groove - Spindle bore (diam.) 20 mm - Tailstock quill 150 mm / MK3 -Hand rest upper section 300 mm -Weight 270 kg -Length x width 1,800 x 640 mm - Motor 2.2 kW / 3 HP The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: lathe, lathe machine, lathe, lathe, woodturning, woodturning machine, turning, woodturning knife, turning, machine, Hager Reference: R-A0117

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER HDE 300 lathe with a motor output of 3 HP. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Center height 300 mm - Center width 1,000 mm (extendable*) - Electronic speed control (100-450 / 300-1,100 / 750-2,700 rpm) - Hollow spindle D = 20 mm with inner cone MK3 - Quill travel 150 mm Codpfxstpnu Rs Ailord - Motor 3 HP / 400 V - Weight 276 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, woodturning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117

Condition: excellent (used), Year of construction: 2019, COURSE ROOM MACHINE Cjdpfxertqi Io Ailsrd For sale is a used Hager HDG 250 lathe with a center height of 250 mm. The machine was used in our in-house lathe courses, is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Technical data: - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) drain safety groove - Spindle bore (diameter) 20 mm - Tailstock quill 150 mm / MK3 - Hand rest upper part 300 mm - Weight 270 kg - Length x width 1,800 x 640 mm - Motor 2.2 kW (3 HP) - Speed 150 - 2,700 rpm The lathe is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: woodturning machine, lathe, lathe, woodturning bench, turning, woodturning knife, woodturning, turning, machine Reference: DH25500-K

Condition: like new (used), DEMONSTRATION MACHINE A Stratos XL demonstration lathe with a center height of 280 mm is for sale. The lathe was only used for a short time for demonstration purposes at Hödnerhof. It can therefore be described as as good as new with full guarantee / warranty. Technical data: - Center height 280 mm - Turning diameter above the bed: 550 mm with optional additional bed (external turning device) up to 1,000 mm! - Center width approx. 780 mm (extendable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock with MK2 cone - Frequency converter (3 belt stages): Stage 1: 60 - 1,200 rpm | Stage 2: 100 - 2,200 rpm | Stage 3: 150 - 3,700 rpm - Quill travel 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick-change system (for ER25 drill quill) - Motor 2.2 kW / 3 HP - Weight approx. 320 kg The machine is located at Hödnerhof in A-6341 Ebbs. Subject to prior sale! Pick up address: Hödnerhof Blumenwelt Eichelwang 2 Cjdju Szr Uspfx Ailerd A-6341 Ebbs Related terms: woodturning machine, lathe, lathe, lathe, woodturning, woodturning knife, wood turning, turning, machine Reference: DDSTRATOSXL-VH

Condition: refurbished (used), A06B-6140-H037 Power supply module, refurbished and tested. Crsdpfx Aozi Sy Seiljd

Condition: refurbished (used), A06B-6117-H210 Servo Amplifier, refurbished and tested. Cjdpfxezi Sxzj Ailsrd

Condition: refurbished (used), A06B-6117-H105 Servo Amplifier, FANUC, refurbished and tested. Csdpfezi Sv Hox Ailjrd

Condition: refurbished (used), A06B-6117-H211, refurbished and tested. Csdpfx Aozi St Eeiljrd

Condition: refurbished (used), A06B-6079-H206#EM FANUC, refurbished and tested. Crjdpjzi Sqkefx Ailed

Condition: refurbished (used), A06B-6096-H105 FANUC, refurbished and tested. Cedpfx Aiozi Sptslord

Condition: refurbished (used), A06B-6097-H203 FANUC, refurbished and tested. Credpezi Spaefx Ailsd

Condition: refurbished (used), A06B-6096-H208 FANUC, refurbished and tested. Credpfszi Snvsx Ailjd

Condition: refurbished (used), A06B-6087-H126 FANUC power supply module, 106A, 29.8 kW. Codpjzi Sncefx Ailerd

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm Credpoxddvnofx Ailjd At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 105 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 630 mm, turning length: 3,000 mm, total length: 5,500 mm, total width: 1,600 mm, total height: 1,600 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 6,400 kg, The PORĘBA TRP-93/3M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, inspection possible anytime Technical data: - distance between centers/turning length: 3000 mm - turning diameter over bed: 930 mm - turning diameter over support: 630 mm - turning diameter in bridge recess: 1150 mm - spindle bore diameter: 105 mm - power drive on upper compund slide for cone and taper turning - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 5500 mm width: 1600 mm height: 1600 mm total weight: 6400 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, (no steady rests) Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants Crodpfjzht I Iex Ailsd - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - MULTIFIX quick change tool post

Condition: used, Year of construction: 1992, operating hours: 64,000 h, functionality: fully functional, turning length: 800 mm, turning diameter: 250 mm, rotational speed (max.): 40,000 rpm, Offered is a CNC lathe / turning machine with the brand Traub model TND 400. The machine is functional and currently still in use. Turning diameter: 250 mm turning length: 800 mm Spindle clearance: 65 mm Turret: 12 tolls with interface VDI 40 Max. speed: 40,000 1/min Control: TX8F Accessories: - Steady rest - ATC tool measurement Crsdpewzw Hwofx Ailsd - Three-jaw chuck from SMW The PLC was revised in 2020 with new Baumüller / Mitsubishi components. Machine will be sold without any warranty.

Condition: ready for operation (used), FANUC circuit board. Cedszib Acjpfx Ailord

Condition: defective spare-parts repository (used), Intended for use as a spare part. The drive mechanism is not functioning. Crsdpfezibyuox Ailjd

Condition: excellent (used), !!!DEMO MACHINE!!! For sale: a Drechselmeister MIDI 2 Plus lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Technical data: - Center height approx. 178 mm / Swing diameter 355 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 RPM - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) safety groove - Tailstock with interchangeable tailstock spindle 100 mm MK2, trapezoidal thread, and measuring scale! (Optional: interchangeable tailstock spindle with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Csdpfozgr Siex Ailerd Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, turning tool, woodturning, turning, machine Reference: R-D1618

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Drechselmeister MIDI 3 lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our specialist personnel. (Fully functional) Technical data: - Center height 190 mm / Turning diameter approx. 378 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - 3 belt stages / speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) drain safety groove - Tailstock with interchangeable quill 100 mm MK2, trapezoidal thread, and scale! (Optional: Interchangeable quill with ER25 collet chuck system for drilling) - Motor 0.7 kW / 1 HP (230 V) with high-quality frequency inverter and “SAFE-START” function - Weight approx. 60 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Crjdpezgr Nujfx Ailjd Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, lathe tools, woodturning, machining, machine Reference: R-D1618

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Drechselmeister Twister XL lathe with a center distance of approximately 800 mm. The machine is in very good condition and has been refurbished and inspected by our qualified technicians. (Fully functional) Technical data: - Center height 250 mm - Swing over bed 490 mm (up to 900 mm with optional external turning attachment!) - Center distance approx. 800 mm (extendable!) - Spindle connection M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper MK2 - Frequency inverter (2 belt stages) 60 – 1,350 rpm and 150 – 3,600 rpm - Quill travel 150 mm (with scale) and trapezoidal lead screw - Motor 1.5 kW / 2 HP - Weight approx. 290 kg Codpfozgr Hgjx Ailord The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, lathe machine, wood lathe, turning, lathe tools, wood turning, turning, machine Reference: R-D1618

Condition: used, functionality: fully functional, Genini Miniautomat – automatic lathe Automatic lathe for turning square stock Hydraulic pump motor with a power of 1.5 kW Maximum length of square stock: 950 mm Credpjzgc Rcefx Ailjd Maximum turning length: 120 mm Maximum turning diameter: 80 mm Two tool posts with profiling tools 1 front spindle for drilling or front profiling 1 roughing tool Machine weight: approximately 1800 kg CE marking

Condition: excellent (used), CATALOG NUMBER 6901 TECHNICAL DATA - max turning length: 1200 mm - max turning diameter: 210 mm - max turning diameter with standard steady rest: 90 mm - max dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copy attachments - additional 3 tools on hydraulic pistons (2 pieces installed) - 4 spindle speeds - automatic or manual machine operation - spindle motor power: 9 kW - hydraulic pump motor power: 3 kW - extraction nozzle diameter: 90 mm - transport dimensions (L/W/H): 3700x2100x2000 mm - weight: approx. 3000 kg Cedpfoyy Ngmox Ailsrd ADVANTAGES – Italian production – automatic hydraulic copy attachment – original technical documentation (DTR) – not repainted – used lathe, in very good condition Net price: 63,900 PLN Net price: 15,200 EUR Net price calculated at the rate 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: used, A02B-0092-C146 FANUC 0-M Operator Panel, used. Codszhkrwepfx Ailjrd

Condition: used, A02B-0084-C147 0-M Operator Panel Credpfxjzhkqyj Ailsd