Used Lacquer for sale (375)

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. Dcjdpfszlktpex Albsl New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: excellent (used), Year of construction: 2015, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: DB504402A, working height: 880 mm, working width: 1,300 mm, feed rate X-axis: 20 m/min, height adjustment type: electric, workpiece height (max.): 80 mm, total height: 940 mm, type of input current: three-phase, overall weight: 2,400 kg, Holmelt glue applicator by Sorbini, very lightly used, approx. 600 operating hours Dsdsy Ed Ucspfx Albecl

Condition: used, Year of construction: 2021, machine/vehicle number: K3999, functionality: fully functional, operating hours: 5,384 h, power: 14.6 kW (19.85 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 10 m/min, total height: 1,430 mm, total length: 5,250 mm, total width: 1,230 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Hebrock K36 AIRTRONIC edge banding machine – zero joint, 2021, low mileage We are selling a single-sided edge banding machine from Maschinenbau Hebrock GmbH (Hüllhorst, Germany), model K 36 with AIRTRONIC system, machine number K3999, year of manufacture 2021. The machine is currently in operation at our facility – fully functional and ready for immediate use. Zero joint – this is what sets this machine apart. The edge banding machine is equipped with an Airtronic hot air unit. Compressed air heated to 300–600 °C is directed through a nozzle directly onto the functional layer of the edge band, just before the pressing zone – the edge band fuses with the panel without a visible glue line. In practice, this means the ability to edge band acrylic, high-gloss, and lacquered fronts with quality comparable to laser technology, without investing hundreds of thousands of zlotys in a laser machine. This is the most expensive and rarest option in this class of edge banding machines – on the used market, there are literally only a few machines with a zero joint available across Europe. The machine can also operate in a conventional mode, using standard EVA and PUR hot melt adhesive. Mileage – documented by the machine’s counters: Operating hours: 5,384 mth Length of edge band applied: 619,339 m (619 km) Parameter Value Type K 36 Machine number K3999 Year of manufacture 2021 Voltage / frequency 400 V / 50 Hz Rated current 28.9 A Total power 14.6 kW Operating hours 5,384 mth Edge length 619,339 m Machine name Single-sided edge banding machine with Airtronic zero joint Machine number K3999 Functionality Fully functional Operating hours 5384 Live demonstration possible Dodpjzvu Ekjfx Albecl Weight / dimensions 1700 kg · 5250 × 1230 × 1430 mm Input current 28.9 A (rounded to 29) Workpiece height 60 mm X-axis feed 10 m/min Edge thickness 3 mm PRICE 250,000 NET

Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2004 Product number: 04177/1 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/5 Dcedpfx Aozumxmolbol

Condition: used, Year of construction: 2011, Technical data: - VEN SPRAY PERFECT automatic spraying machine - Year of manufacture: 2011 - Working width: 1,300 mm - Working height: 940 mm +-20 mm - Parts detection via light curtain - CNC 7000 control system - Right-hand side operation - Z16 dual gun drive - Water-sprinkled extraction system - Extraction system in stainless steel design - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Paint recovery system via V-band - Feed speed continuously adjustable 3 - 9 m/min - Installed spray circuits 2 pcs. - Gun arm quick-change system, 1 pcs. - Number of installed spray devices 4 pcs. - Number of material pumps 1 pcs. - Supply air filter ceiling G5 - Length ~ 6,590 mm - Width 3,666 mm (+1,152 mm) - Height 2,500 mm - Total connection 22 KW - Volts, Hz 400 / 50 - Colour RAL 7035 - Location, in stock from Voltage fluctuations max. +/- 5 % The photos show the spray machines before the overhaul. Dcsdpfozv Tczjx Albjl _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: A1407003, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: cabin, For Sale: Complete Venjakob Surface Finishing Line We offer a complete Venjakob automated surface finishing line designed for high-efficiency coating, sanding, and drying of flat workpieces. This line is ideal for industrial applications requiring consistent and high-quality surface treatment (e.g. furniture, doors, panels). The Venjakob line consists of: Dodpfjxm Twtjx Albecl VEN TRANS BELT modules: 0100 / 0300 / 0500 / 0600 / 0800 / 1000 / 1200 / 1300 / 1350 VEN SAND BRUSH modules: 0200 / 0900 VEN SPRAY COMFORT modules: 0400 / 1100 VEN DRY AIR JET modules: 0700 / 1400 Technical data provided in the documentation.

Condition: ready for operation (used), functionality: fully functional, This used Jungheinrich Esmena pallet racking is a compact, high-performance heavy-duty racking system designed for industrial storage requirements. The modular high-bay shelving is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load capacity of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 10,080 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow lacquered - Uprights: approx. 400 x 105 cm, pre-assembled - Upright color: blue lacquered - Levels: floor + 2 - Pallet positions: 324 incl. floor locations - Condition: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 037 x uprights (approx. 400 x 105 cm), pre-assembled - 144 x beams (approx. 270 cm) - 288 x safety pins Price: €6,580.00 net €7,830.20 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner freight forwarder – shipping costs depend on the postal code - Professional installation and dismantling by trained teams available as an option - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department is happy to provide you with a non-binding offer tailored to your requirements. Whether new construction, conversion, or extension – we offer professional advice on your racking configuration. SHOWROOM: Visit us in our showroom! See a wide range of our pallet racking, warehouse shelving, and other solutions on display. Many systems are assembled and can be experienced firsthand. Our specialists are available for questions and personalized advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone. Our phone number can be found on our company page. ☎️ You can reach us by phone Monday to Friday, 8:00 am – 4:00 pm. Dedezzaaqepfx Albecl Alternatively, send us a message with your name and number, and we will call you back as soon as possible.

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 - Working width 1.300mm - Type. Flash off dryer, VEN DRY Flash Off - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW - Air speed 2-5m/s - Max. Drying temperature 30°C - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm Dcsdpfxozv Tdxe Albjl - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: good (used), Year of construction: 2009, For sale GIARDINA MOS/4PLUS paint line Dcedpfx Alstxnp Njbol

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07022/01, We offer this used Cefla Finishing SPRAYBOTIC RU MW machine, manufactured in 2007. Dodpfx Aljzhbd Rjbecl Machine type: SPRAYBOTIC RU MW Year of manufacture: 2007 Serial number: 07022/01 Supply voltage: 380 V Electrical frequency: 50 Hz Total installed power: 38.5 kW If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2015, operating hours: 600 h, functionality: fully functional, machine/vehicle number: DB 504404C, feed length X-axis: 20 mm, working width: 1,300 mm, working height: 940 mm, Machine for smoothing lacquer using a silicone belt with UV curing Dedpfx Aloy Effcjbjcl

Condition: used, Year of construction: 2013, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display Djdpfjzv Tb Rex Albocl

Condition: good (used), functionality: fully functional, working width: 500 mm, total width: 1,100 mm, total length: 2,250 mm, total height: 1,400 mm, Water-cooled LED-UV dryer in operation; the machine is equipped with a control system allowing speed adjustment. It features two powerful water-cooled LED lamps for immediate surface drying. Djdpey Exz Rsfx Albscl

Condition: used, Year of construction: 2016, techncal data: Dcodpfxjzf N Rgj Albol - Producer: Printworld - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital - control and monitoring - UV radiation protection: Built in on the machine frame - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) - Outlet height: 850 – 900 mm (or by appointment) - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE - Current 135A - Location: on stock

Condition: used, Year of construction: 2005, - Manufacturer: Cefa - Type: KLEENSPRAY - Year of manufacture: 2005 - Working width: 1,200 mm - Working height: 900 mm + - 20 mm - Operating side: right - Price for reconditioned machine - Gun drive: Duo version - Height-adjustable sprayers - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity ~ 6,500 m³/h - Paper belt transport system - Feed speed continuously adjustable 1.5 - 7 m/min - PLC control with touch screen - Number of sprayers installed 0 - Number of paint pumps 0 - Suitable for solvent-based paints - Suitable for water-based paints - Length 4.300 mm - Width 3.360 mm + 1.850 mm - Height 2.700 mm - Total connection ~ 7.1 kW / 28.6 A - Volts, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with a quote for assembly and commissioning of the system, as well as training for employees. On request, we also offer regular maintenance and servicing of the machine. Dcjdezv Tgtspfx Albel For further information, please contact us!

Condition: used, functionality: fully functional, On offer: SAC RTE 1000 wide belt sander, with pressure shoe The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its ability to calibrate and precisely finish-sand. The unit with a hard rubber roller is responsible for leveling the surface, and the pneumatic pressure shoe with a "creep feed" function allows for precise finishing of the component. The two-speed motor and two conveyor speeds allow the operating parameters to be adjusted to the material being processed. Specifications: • Manufacturer: SAC • Model: RTE 1000 • Working width: 1000 mm • Maximum height of the workpiece: 165 mm • Number of sanding units: 2 • One combined unit: hard rubber roller, 160 mm diameter + pressure shoe Dsdpfx Ajzvuy Islbscl • Pneumatic pressure shoe with "creep feed" function • Main two-speed motor: 10 / 12 kW • Number of conveyor speeds: 2 • Electric adjustment of the work table height • Abrasive belt blowing system • Abrasive belt dimensions: 1900 × 1000 mm • Dust extraction port: Ø200 mm • Overall dimensions: 145 × 210 × 190 cm (L × W × H, without the guard) Applications: • Calibrating and leveling solid wood components • Sanding panels and glued components • Inter-operation sanding • Precise finishing sanding using the pressure shoe • Processing components with a width of up to 1000 mm and a height of up to 165 mm • Preparing surfaces for lacquering, oiling, or further processing Additional information: • The photos show the actual condition of the machine being offered • Free machine operation training at our company's premises • The price stated in the auction applies to export/intra-community sales with a VAT rate of 0%; for domestic sales, 23% VAT will be added. Financing and transport: • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The delivery cost depends on the destination and the method of transporting the machine.

Condition: not inspected (used), Year of construction: 2013, functionality: unexamined, working width: 330 mm, passage height: 120 mm, Infrared drying tunnel for profiled wood Manufacturer: Makor Type: FTC-IRE Year of manufacture: 2013 The Makor FTC I.R.E. paint drying tunnel is designed for the accelerated curing of paints and surface coatings using electric heating elements, which are applied to frame timbers, moldings, profiled wood, and generally all types of wood profiles. It can also be used for preheating the profiles before the painting process to improve the paint quality. Passage width approx. 330 mm Passage height approx. 120 mm Infrared heating elements from above and below Includes output conveyor belt, manufacturer: Makor Dsdpfjzhap Eex Albocl Length 4000 mm, conveyor belt width 250 mm Connection value approx. 55 kW Dimensions: Drying tunnel approx. 5000 x 1400 x 1750 mm L x W x H Operator terminal approx. 1200 x 500 x 1100 mm L x W x H Additional output conveyor belt approx. 4000 x 600 mm L x W Total weight approx. 2200 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 320/08/8, Tecno Azzurra paint booth with overpressure water curtain Internal dimensions - Length 10000mm - Width 5000mm + 300mm drip grid Dsdpfjwfriujx Albjcl - Height 2700mm Lrjc R Dewfrdxer T Ncok Water wall dimensions 4000x2500mm placed on the side wall 4 x sliding doors measuring 2000x2300 Air blowing 24,000m3/h Air extraction 15,000m3/h Dismantling on the buyer's side Net price

Condition: excellent (used), Wide-belt sanding machine KÜNDIG Premium for finishing coats Type Premium 1 1100-C - used - constant working height thanks to adjustable upper section, combined unit with contact roller and sanding pad, Dsdpfx Ajzkvd Rolbocl contact roller with rubber coating, pneumatic activation of the contact roller, electronic segmented sanding pad, digital display for sanding height, automatic thickness adjustment, infinitely variable feed rate, automatic carpet centering, operation via touchscreen, belt cleaning, air-sprung sanding pad, sanding belt oscillation, workpiece cleaning via compressed air nozzles, table extension at the infeed and outfeed, finishing coats possible ----- Technical data ----- Working width: 1,100 mm, Number of belts: 1 piece, Sanding belt speed: 3 - 15 m/sec., Feed rate: 3 - 15 m/min., Segment width sanding pad: 22 mm, max. workpiece thickness: 205 mm, min. workpiece thickness: 3.5 mm, Dust extraction port Ø: 180 /120 /100 /100 mm, Motor power: 11 kW, Dimensions (LxWxH): 1,660x1,700x2,250 mm, Weight: 2,150 kg Quality information: - Belt run / imbalance checked - Sanding pad checked / refurbished - Height adjustment checked - Complete thorough cleaning - Electrical system checked - Ready for immediate use

Condition: used, Year of construction: 2014, With paper web and belt conveyor with web cleaning.System consisting of: 1. Feeding conveyor 2,000 mm 2. Spraying machine 3,630 mm 3. Take-off roller conveyor 2,000 mm - Total length: 7,630 mm - Operator side: leftItem 1 Feeding belt: - Manufacturer: Venjakob - Model: Belt Conveyor AL - Year of manufacture: 2014 - Feed rate: approx. 2.5–5 m/min. - Max. load: 15 kg/m - Length: 2,000 mm - Motor power: 0.5 kW - Variable-frequency drive (VFD) controlledItem 2 Automatic Spray Machine:Can be operated with either the belt conveyor system or the paper belt conveyor system!- Manufacturer: Venjakob - Model: VENSPRAY Smart - Year of manufacture: 2014 - Working width: 1,300 mm - Working height: 920 mm ± 20 mm - Operating side: left Djdpfx Ajzv Tfvolbscl - Suitable for solvents and water-based coatings - Price for a refurbished machine - As-is condition; machine has not been refurbished - Spray gun drive in Duo configuration - Dry extraction - Exhaust port diameter: 400 mm - Exhaust air flow rate: 7,000 m³/h - Feed speed: infinitely adjustable ~ 2.5–5 m/min - Light curtain, part detection, Type LS 25 - Touchscreen control - Paper belt transport system - Belt squeegee and cleaning system Type R1 - Number of paint circuits installed: 2 - Number of spray guns installed: 4 - Quick-change system for spray guns - Spray guns, Type Kremlin Airmix AVX - Airmix spray system - Number of paint pumps: 1 - Pump manufacturer: Wagner Cobra 40/25 - Length: 3,630 mm - Width: 3,450 + 990 mm - Total power consumption: 16 kW - Location: not in stock - Voltage fluctuations: max. ±5%Item 3 Acceptance of roller conveyor: - Manufacturer: Venjakob - Type: Roller conveyor - Year of manufacture: 2014 - Feed rate: approx. 2.5–5 m/min - Max. load: 15 kg/m - Length: 2,000 mm - Roller spacing: 150 m - Variable-frequency drive controlled Images are for illustrative purposes only; they are not originals*

Year of construction: 2005, condition: used, machine/vehicle number: 203/05, Tecno Azzurra paint booth with overpressure water curtain Internal dimensions - Length 7000mm + 2000mm drip grid - Width 5000mm - Height 2700mm Dcodpfx Aowfrdxelbol Water wall dimensions 5000x2500mm 3 x sliding doors measuring 2000x2300 Air blowing 29,000m3/h Air extraction 22,000m3/h Dismantling on the buyer's side Net price

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW Dedpfx Alew H Aw Sjbscl - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: used, Year of construction: 2007, Technical Specifications: - Manufacturer: Venjakob - Model: VEN SPRAY Comfort - Retrofit 2026 (Year of manufacture: 2007) - Working width: 1.300 mm - Control panel on the right - Price for a refurbished machine - As-is condition, not refurbished - Dual-gun drive system - Dry extraction - Exhaust air capacity 7.000 m³/h - Exhaust nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 3–7 m/min - With belt cleaning system - With paint recovery via V-belt system - Automatic part detection via light curtain - Spray gun control, touch screen - 1 paint circuit installed - 4 airless spray guns, Krautzberger KAA1300 - 1 high-pressure airless pump - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total power consumption ~ 23 kW Measures: - Length: - Width: 3,690 mm - Height: 2,520 mm (2,360 + 440 mm) - Volts, Hz: 400 / 50 - Color: Light Gray 7035 + Black - Location: Not in stock, available from August 2026 Dcsdozv Tf Aspfx Albol - Voltage fluctuations: max. +/- 5% Some images are examples of a refurbished automatic spray machine of the same type._____Optionally, we can also provide you with a quote for installation and commissioning of the system, as well as employee training Upon request, we also offer regular maintenance and servicing of the machine. For further information, please feel free to contact us!

Condition: used, Promac brand paint machine, model S.3P.3L, consisting of paint pump, 3 paint guns, 3 UV lamps for drying and transport tape from 6200 x 10 mm, command panel, timers and ‘manual/automatic’ drives. Dsdpfx Ajy S Ac Ejlbecl Promac brand painter, model S.3P.3L, consisting of a varnishing pump, 3 varnishing nozzles, 3 UV drying lamps and a transport belt of 6200 x 10 mm, control panel, timers and drives 'manual/automatic'.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, working width: 200 mm, working height: 40 mm, Equipment: documentation/manual, Impregnation machine / Coating machine Manufacturer: Schiele Type: Impregmat VM Mini Year of manufacture: 2016 Board coating machine with brush application, suitable for coating profiled boards, moldings, and construction timber. Dcedjzpydrjpfx Albol Suitable coating systems: Suitable for water-based paints and coatings Suitable for solvent-based paints, stains, and coatings Working width: approx. 30 - 200 mm Workpiece height: approx. 5 - 40 mm Workpiece length: from approx. 800 mm - endless Feed speed: approx. 20 m/min pneumatic double-diaphragm pump Stainless steel machine body for easy cleaning with roller conveyors before and behind the machine, length approx. 2000 mm each Documentation & wiring diagram available