Used Lamella for sale (72)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 111,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: 16i-MB, total height: 3,300 mm, table width: 2,700 mm, overall weight: 9,000 kg, spindle speed (max.): 12,000 rpm, product length (max.): 3,700 mm, number of axes: 5, This 5-axis STAMA MC 734M was manufactured in 2006. It features a travel range of 800 mm in the X-axis, 520 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 48 + 90 tools. If you are looking to get high-quality machining capabilities, consider the STAMA MC 734M vertical machining centre we have for sale. Contact us for further details. Dwjdpfx Ajzzxa Nslbsb - Interference Radius: 252 mm- Connected Load: 51 kVA- Total Power Requirement: 46 kW- Connection Voltage: 400 V3 50 Hz- Nominal Current: 75 A- Additional Fuse: 3x 80 A- Min Cross Section Connection: 4x25 mm²- Spindle Taper: Capto 6- Spindle Bearing Diameter: 85 mm- Max Spindle Torque: 142 Nm (S6/20%)- Tool Magazine Capacity: 48 + 90 tools- Tool Clamping Force: 8,000 N- Max Tool Diameter: 160 mm- Max Tool Length: 300 mm- Feed Rate X / Y / Z: 1 - 10,000 mm/min- Rapid Traverse X / Y / Z: 60 m/min- Max Feed Force X / Y: 7,000 N- Max Feed Force Z: 8,000 N- Max Milling Capacity: 600 cm³- Max Drilling Diameter: 40 mm- Max Tapping Diameter: M30- Main Spindle Motor 1: Kessler DMQ .4.AFS/F (22.0 kW, 12,000 rpm)- X-Axis Motor: Fanuc A 06 B-0269-B 100 (5.5 kW, 3,000 rpm)- Y-Axis Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)- Z-Axis Motor: Fanuc A 06 B-0273-B 400 (5.5 kW, 3,000 rpm)- Tool Magazine Motor: Fanuc A 06 B-0235-B 000 (2.5 kW, 4,000 rpm)- 4th Axis B Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)- 5th Axis C Motor: Fanuc A 06 B-0236-B 100 (2.3 kW, 4,000 rpm)- 8th Axis X2 Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)- 7th Axis U Motor: Fanuc A 06 B-0213-B 400 (0.75 kW, 4,000 rpm)- V-Axis Motor: Fanuc A 06 B-0216-B 400 (1.0 kW, 4,000 rpm)- Supplementary Magazine Motor: Fanuc A 06 B-216-B 400 (1.0 kW, 4,000 rpm)- Flat Magazine Motor: Fanuc A 06 B-0235-B 100 (2.5 kW, 4,000 rpm)- Coolant Pump 1: Brinkmann BFS 238/70 (5.0 kW, 2,900 rpm)- Coolant Pump 2: Brinkmann TH 90/470-540 (3.3 kW, 2,900 rpm)- Dirty Water Pump: Brinkmann TAS 603/280-6156 (5.5 kW, 2,900 rpm)- Wash Gun Pump: Brinkmann TH 90/470-540 (3.3 kW, 2,900 rpm)- Self-cleaning Lamella Filter Motor: Motovario P 63 B 4 (0.18 kW, 1,360 rpm)- Chip Conveyor Motor: Bauer BS 06-74V/D 05 LA4/SP (0.25 kW, 1,350 rpm)- Hydraulic Unit Motor: Rexroth UPE5-4.00A10V5010ANT-H-1-025 (4.0 kW, 1,390 rpm)- Cabin Extraction Motor: Ziehl-Abegg RH 31 M-20K.5H.2R (0.75 kW, 2,880 rpm)- Conveyor Belt Motor: SEW-Eurodrive R 47 DT 7104/AS B1 (290 Nm, 1,380 rpm) Included Equipment: Chip conveyor, auxiliary magazine, coolant system, workpiece loader Technical Specification Through-spindle Coolant Yes

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer for sale a Bonded Panel Technology LTD (Duemas) Lamella Cutting System for mineral wool boards, complete with extraction unit, manufactured in 2014 and in very good technical condition. This equipment is engineered for precise cutting of mineral wool boards into lamellas with adjustable thicknesses from 40 mm to 200 mm, making it ideal for sandwich panel and insulation material producers. The system comprises: - Lamella saw with 35 Ø550 mm blades (15 new blades in original packaging) - Two 3-meter gravity conveyors - Additional main shaft (2 shafts in total) - Complete set of spacers and top boards for 40, 50, 60, 80, 100, 120, 150, and 200 mm - Complete dust extraction system with 15 kW Auto Shaker filter - Full ductwork and connection components Main technical data: - Maximum slab width: 1010 mm Dwjdpfx Aleyk Dmnsbob - Maximum slab thickness: 200 mm - Main motor: 15 kW - Power supply: 415V, three-phase - Approx. 3,000 operating hours (2014–2019) This equipment has been well maintained and is in very good working condition. Immediate availability.

Condition: excellent (used), Year of construction: 2024, operating hours: 50 h, Lamella Production Machine The automatic acoustic panel stapler is equipped with an advanced three-axis NC control system, providing exceptional precision and flexibility in the manufacturing process. Below are the detailed advantages of each axis: 1. X-Axis: Precise Stapler Positioning Along the Horizontal Axis - The X-axis ensures accurate horizontal positioning of the staplers along the panel. This guarantees that staples are precisely applied at designated points, ensuring consistent stitching quality across the entire length of the panel, regardless of its size. 2. Y-Axis: Vertical Movement - The Y-axis allows vertical movement of the stapler, enabling stapling at various locations on the panel, regardless of its dimensions or shape. This enables the stapler to work with non-standard sized panels while maintaining full accuracy. 3. Z-Axis: Depth and Stapling Force Control - The Z-axis controls the depth and force with which the staples are driven into the panel. This allows the process to be precisely adjusted according to the thickness and hardness of the acoustic panel material. As a result, staples are embedded with optimal strength, ensuring the durability and aesthetics of the finished product while minimizing the risk of material damage. ### Automatic Changeover Automatic changeover is a key feature that significantly enhances production efficiency. With this function: - Changeover of the X, Y, and Z axes is fully automatic. ### Production Process Optimization Integration with production management systems such as MES (Manufacturing Execution System) and ERP (Enterprise Resource Planning) enables: 1. Full Control Over the Manufacturing Process: - Thanks to MES and ERP integration, every stage of production can be fully monitored and managed. 2. Optimization of Media and Material Consumption: 3. Optimization of Production Plans: ### Significant Relief for Operators Automation of the acoustic panel stapling process directly reduces manual workload: Dedpfxsy Sw I Nj Albswb - Elimination of manual control requirements - Increased work efficiency ### Capability to Develop Algorithms for Media Demand Analysis Thanks to advanced integration with manufacturing management systems, the stapler allows for the creation of sophisticated algorithms to analyze production media demand: 1. Media Demand Analysis: 2. Adapting Production to Variable Conditions: ### OEE (Overall Equipment Effectiveness) Analysis The stapler also facilitates advanced OEE analysis, a key performance indicator in production operations: 1. Comprehensive Production Monitoring: 2. Automatic OEE Calculation: - The MES system automatically calculates the OEE value based on collected data, allowing immediate assessment of the stapler’s operational efficiency. This tool enables rapid identification of areas requiring optimization, such as downtime reduction, product quality improvement, or machine performance enhancement. 3. Early Detection of Problematic Areas: 4. Optimization of Production Plans: ### TPM (Total Productive Maintenance) and Automated Condition Monitoring The stapler also supports the implementation of TPM philosophy, focusing on maximizing machine efficiency and reliability...

Condition: used, The machine is in good working order and ready for use. It was previously used in a company that specializes in vegetable washing. Dedpfxezc Ef Ae Albswb The machine was used to pre-treat wastewater. Please check out my other listings.

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Djdpsppyhtsfx Albowb Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: ready for operation (used), Two Artinox inclined clarifier/lamella clarifier systems made of stainless steel are offered for the continuous mechanical separation of dirt particles, sludge, or sediments from water or process liquids. 1) Artinox inclined clarifier/lamella clarifier, pipe connection: Ø 108mm, additional connection: Ø 168mm, main module dimensions: approx. 2400mm/1350mm/2360mm, hopper width bottom/top/center: approx. 1323mm/1896mm/1546mm, inclination: approx. 1.1°, function: solid-liquid separation by sedimentation, application: process water, wastewater, wash water, liquids containing settleable solids, separation principle: sedimentation with lamella packs/inclined plates, flow direction: horizontal, lamella packs: available, sedimentation hopper: available, equipped with multiple basin modules, lamella clarifier sections, sludge hopper, upper pipe distributor, connection nozzles and flanges, lifting lugs, frame, maintenance access. 2) Artinox inclined clarifier/lamella clarifier, smaller module dimensions: approx. 2300mm/1250mm/1371mm, hopper height/inclined bottom section: approx. 1050mm, inner/lower hopper dimension: approx. 775mm, lamella/sheet spacing: approx. 293mm, function: separation of settleable solids from liquids, design: rectangular clarification tank with hopper bottom, flow path: via inlet, clarification zone, overflow edge, sludge hopper: available, separate pre-collection tank: available on the side, discharge pipe/flange connection: available, maintenance ladder: available, wooden cover: available, equipped with main clarification tank, hopper bottom, side-mounted attachment tank, pipe connection, flange, maintenance ladder, upper cover. Inspection possible by appointment. Dwodpfx Alezhb Hfebsb

Condition: used, Lamella separator 2 pieces identical in construction: - Manufacturer and year of manufacture unknown (probably late 70s) - Rectangular design, with discharge screws to the funnel - Dimensions: Length 9700mm, width 3500mm, height 6100mm Dedpfxot Ay Sce Albswb

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Cabinet length: from 250 to 2500 mm Cabinet depth: from 250 to 700 mm Cabinet height: from 150 to 1400 mm Dwsdpezphrkofx Albeb Working height: 300 mm Pressing pressure (fixed): max. 15 kN Positioning speed (fixed): 25 mm/s Transport interface: no Control: via contactors/protection devices Weight: approx. 2.2 t

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 66 kW (89.73 HP), cutting height (max.): 300 mm, cutting width (max.): 400 mm, Equipment: CE marking, Horizontal thin-cut band saw with 3 stations Manufacturer: Allwin Type: AW-400-3 Year of manufacture: 2013 Horizontal thin-cut block band saw with 3 stations, originating from a parquet manufacturing facility. Suitable for cutting individual lamellas. Max. cutting height approx. 300 mm Max. cutting width approx. 400 mm Approx. 22 kW / 30 HP per station Dodpfxozyx Epo Albowb Data partially estimated!

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min Dedpfx Aljw H Rq Hjbswb - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Year of construction: 1999, condition: used, The DSG 200 vertical sawmill is an ideal option for carpentry shops specializing in furniture and wood flooring, it is efficient and performs effectively. A used Wintersteiger mini wood sawmill is a very good investment, a big plus of this machine is that it doesn't take up as much space as standard devices of this type, and at the same time it is great for processing raw material. It is used for cutting individual pieces and fitting them to the appropriate size. Operation of this device is not particularly complicated and can be learned quickly. The biggest advantage of our sawmill is its rich equipment, which includes, first of all, a saw sprinkler system, controlled from the panel, which allows precise cutting of wet raw material. It has an independent control for adjusting the height of the upper rollers, which makes it possible to set the height of cut faster. Pneumatic pusher to assist the feed TECHNICAL DATA: -Total power 27.3 kW -Air Jet system motor 2.3 kW -Siemens control panel Dwodetvm Hdjpfx Albsb -Propulsion up to 2m/min -Stroke of traction frame 210 mm -Stroke count 400/min -Cutting height, continuously (steplessly) adjustable on our frame 45-250 mm -Maximum cutting height possible is 400 mm ! -Cutting width with side pressure 80-205 mm -Block length min. 250 mm -Lam thickness from 1.5 mm - depending on the type of wood and cutting height -Blades used : 0,9-1,1 mm -depending on cutting height -Length approx. 5000 mm -Width approx. 1300 mm -Height approx. 2600 mm -Weight : 5000 kg Pneumatic pusher to assist the feed We add to the machine: -complete large saw frame , -small saw frame, -frame pins, -clamps for stretching the frame, -saw attachments, -wet cutting saws, -dry cutting saws , -a set of top pull rollers, - 4 pcs of bottom pull rollers, -complete sliders, -frame yokes, -pocket cutting guides , -loading magazines, -DTR documentation -electrical diagram

Year of construction: 2009, operating hours: 1,629 h, condition: excellent (used), functionality: fully functional, Technical Description – Wintersteiger DSG Sonic Main Features: - Designed for thin-cutting of boards and panels in lamella/parquet production. - High-precision blade guidance without tolerances (no "play"), ensuring improved cutting accuracy. - Symmetrical saw frame construction provides uniform blade tensioning. - Revolutionary drive concept with servo-controlled precision feed. - High stroke frequency of the saw frame: 550 strokes/minute. - Modular and ergonomic design: split construction for easy access and simple maintenance. DSG Sonic — Maximum element cutting height: - For 380 mm saw: cutting height 30–88 mm (or 45–88 mm, depending on configuration) - For 420 mm saw: cutting height 30–128 mm (or 45–128 mm) - For 500 mm saw: cutting height 80–210 mm (or 45–210 mm) - For 550 mm saw: cutting height 80–254 mm (or 45–254 mm) Djdjx Avzyepfx Albswb Machine specifications and requirements: - Machine weight (basic unit): approx. 3,000 kg - Dust extraction/exhaust: two connections required — Ø 120 mm and Ø 150 mm; extraction capacity: approx. 3,200 m³/h (air velocity ~ 30 m/s). - Compressed air pressure: minimum 6 bar; air consumption: approx. 200 l/min. - Lubrication: central lubrication system with guideway monitoring. - Machine year: 2009 - Operating hours: 1,629 - Condition: very well maintained.

Condition: like new (used), Year of construction: 2025, Horizontal thin-cut band saw with 3 heads 300 mm working width With 3 cutting heads, to make max 4 slats in one run New 2025 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 970mm wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new * Dwedpevwbg Ujfx Albob

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: V 117812, input voltage: 380 V, input current: 11 A, Machine is in very good condition - Electric height adjustment and handwheel adjustment - Newly fitted bearings Dodpfx Aloyt Nx Uobswb - New knives installed - Gearbox lubricated - New protective lamellae installed - Planing width: 630 mm - Planing height: 250 mm - Feed speed: 8–20 m/min - Extraction nozzle: 160 mm - Weight approx. 870 kg - Rubber-coated infeed and outfeed rollers - Two-knife cutterblock with strip planing knives - Central lubrication - Star-delta switch

Condition: used, Year of construction: 2013, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Dodsvwfhiopfx Albowb

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 Dwjdoxg Dhcjpfx Albeb - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Condition: good (used), Year of construction: 2006, Manufacturer: TECNO VIBRAZIONI - year of manufacture: 2006 Dwedpfx Aljpl Ttcebjb - type: 28482 - overall dimensions: 2100x900x2900mm - strap width: 200mm - receiving size: 700x700mm - issue size: 200x130mm - transport speed: 6.0 m/min - electrical data: 400V; 0.18W; 0.7A

Condition: good (used), Year of construction: 2011, Manufacturer: Bonino Type: 37458 Weight: 230 kg Dwodpfxepl T A Es Albsb Inclusion dimensions: 2300 x 1000 x 2900 mm Year : 2011 Electrical data: 400 v; 50Hz; 0.7A; 0.18 kW Belt size (laminated): 180 x 2300 mm Hopper size: 210 x 210 mm Dispensing height: 1850 mm It has a track with active cooling.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Matec 30 L, year of manufacture 2010, Heidenhain iTNC 530 control, travel X/Y/Z 1300/600/700 mm, spindle speed up to 12,000 rpm, HSK 63 - A tool holder, electronic handwheel, ICS 20 bar, paper band filter, 80-position tool magazine, full enclosure of work area, direct measuring systems, chip conveyor, bellows with steel lamellae, 3D measuring probe, laser measuring device. Dsdpfx Aozdqk Eslbewb

Condition: used, Year of construction: 2023, functionality: fully functional, CLT Cross-Laminated Timber (CLT) production line with CNC machining center Capacity: approx. 25,000 m³/year (2-shift operation) Functional Description / Scope of Supply: - Longitudinal lamella feeding: Loading – Singulation - Cross lamella feeding: Loading – Vacuum destacking – Feeding to planer - Formation and buffering of longitudinal layers: Longitudinal layer preparation and discharge station Djdsxzy N Sopfx Albewb - Formation and buffering of cross layers: Two-stage cross layer buffer – Cross layer discharge station - Layup and gluing area: Vacuum layup gantry – Adhesive application gantry – Layup table - CLT press: TimberPress X331 - Outfeed area after CLT press: Cross transfer carriage to buffer stations, Reichenbacher system and discharge station with flipping unit - Reichenbacher CNC machining center CLT blanks (LxWxH): Min.: 6,000 x 2,000 x 60 mm Max.: 12,040 x 3,140 x 350 mm 3–9 layers Raw material: Longitudinal layers (LxWxH): Min.: 6,000 x 100 x 20 mm Max.: 12,040 x 280 x 50 mm Cross layers (LxWxH): Min.: 2,000 x 105 x 23 mm Max.: 3,140 x 285 x 53 mm Price and further information available on request.

Condition: good (used), Attachment: Lamella separator Dwodpfx Asb D Etkelbeb Condition: pre-owned m³/h up to 80 m Usage: Separation of solids and liquids by sedimentation. Lamella separator as a preliminary stage before filter presses are often used for thickening. The filter press in relation to the filter surface can be sized smaller through a thin slurry before thickening. The plant is in good condition and available for rent and for sale. Visit us at the factory is like possible agreement.

Condition: used, Year of construction: 2020, Industrial bandsaw CENTAURO SUPERCUT 80 BANDSAW FOR THIN SLICES WITH THE HIGHEST PRECISION Dwodpjzvflnsfx Albsb The major advantages of a compact and versatile machine for all applications in the field of thin slicing: Thin slicing from 2 mm material thickness Maximum cutting accuracy up to 0.15 mm Minimum cutting kerf from 1.3 mm Ideal for cutting dry and wet wood as well as alternative materials The surface of the thin lamella can be glued directly, without any further post-processing being required User-friendly electronic control Two programmable feed speeds of the conveyor belt from 0 to 30 m/min for optimal cutting quality and a longer service life of the saw blade Optical sensor for starting the cutting cycle and for automatic speed switching Ground work table Flexam feed belt for optimal performance 6 height-adjustable rubber pressure rollers, whose position can be adjusted to open/close, in order to ensure the optimal pneumatic clamping pressure on the workpiece during the feed and cutting process Oleopneumatic saw blade tension for optimal cutting performance Upper and lower Chaco saw blade guides, which ensure optimal stability of the saw blade during the cutting process Internal and external lubrication of the saw blade for removing resin residues and chips 4 dust extraction connections to optimize the extraction of dust and chips Maximum cutting height 400 mm (optional 500 mm) Maximum cutting width 400 mm Powerful quality motor with 15 kW (20 hp) Ethernet interface for online service and remote maintenance Carbide or stellite saw blades for optimal cutting performance Maintenance-friendly design and easy service

Condition: new, Main features of the machine: The TOP CUT 500 bandsaw offers high quality features and great opportunities, especially for companies, woodworking on various scales. The machine provides unparalleled stability and solidity. -touch panel with electronic display of cutting height -Control panel on the front of the machine for easy and convenient operation Dodpfjiim Tqsx Albjwb - electronically controlled and programmed cutting thickness - cutting unit lifted on two motorized pistons - feeding and return belt driven by a hydraulic variator -hydraulic cutting band tensioning system -pneumatic lubrication of the cutting band -Pneumatic system of pressure rollers ensures the accuracy of guidance -stable, steel construction of the machine guarantees precise work -accuracy and repeatability of cutting up to 0.01 cm Technical data: Maximum dimensions of the workpiece: 520x300 mm Transport belt width: 495 mm Transport belt length: 5535 mm Max cutting height: 300 mm Minimum element height: 5 mm Saw band diameter: 711 mm Saw wheel width: 45 mm Extraction port diameter: 100 mm Feed speed: 0 - 13 m / min Saw dimensions: 5200 x 35-55 x 1.6 mm Voltage: 380V Main engine power: 18.5 kW Total power: 21.5 kW Weight: 2400 kg Dimensions: 2800x2400x2000 mm

Condition: excellent (used), Year of construction: 1980, I sell the small double side moulder Holz-Her 1710. Feeding with top Feeder Working width 110mm Working height 90mm 2 spindles Configuration: right - left 3KW Total power apprx. 5,5kW Machine suitable for small elements, lamellas, beehives. Fully working! Very good condition. Dodpfxjyc N Eae Albewb Sellable immediately

Condition: good (used), functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 5,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 9, power: 95 kW (129.16 HP), input frequency: 50 Hz, Equipment: cabin, Four-sided planer Weinig Unimat 23, lamella machine 9 spindles, grooved bed Working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) 4-Right (5.5 kW) 5-Top (11 kW) 6-Bottom (5.5 kW) 7-Top (7.5 kW) 8-Bottom (37 kW) 9-Uni (11 kW) Dedpfx Aox Hkp Njlbowb 5 driven rollers in the table