Used Laboratory for sale (1,409)

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 Dedpfx Ajd Sg Hroc Necc 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-170 B Electronic DC load, USB / Analogue / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNenn Overcurrent protection range 0...1.1 * INenn Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setting values Δ / K current / voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNenn Display: Accuracy ≤ 0.1% UNenn Remote sensing compensation Max. 5% UNenn Current control Setting range 0...173.4 A Stability at ΔU < 0.1% UNenn Accuracy (at 23 ± 5°C) ≤ 0.2% INenn Display: Accuracy ≤0.1% INenn Rise time 10...90% INenn < 23 μs Fall time 90...10% INenn < 46 μs Power control Setting range 0...2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance control Setting range 0.04...15.3 Ω Accuracy (at 23 ± 5°C) ≤1% of the final resistance value + 0.3% of INenn Display: Accuracy Included in the accuracy of the control value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, remote control on/off, R mode on/off Message signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation from the device Max. 400 V DC Sampling rate setpoint inputs 500 Hz Isolation: Input (DC) to housing DC minus: permanent max. ±400 V DC plus: permanent max. ±400 V + max. input voltage Input (AC) to input (DC) Max. 2500 V, short-term Climate: Cooling type Temperature-controlled fans Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x master-slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, Ether- CAT Galvanic isolation from the device Max. 400 V DC Connections: Dcjdpfx Acjuv Eudj Nsc Rear Share bus, DC input, AC input, Sense, analog interface, USB-B, Master- slave bus, interface module slot Front USB-A Dimensions: Housing (WxHxD) 19" x 2 U x 464 mm Total (WxHxD) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a GRIESER tripod dissolver laboratory. Product: Grieser laboratory tripod dissolver Type: GFD 11 LST Purpose: The machine is designed for mixing of powdery solids, liquids and pastes as well as to the work of fillers. The viscosity range can be from low viscosity to Pasty range. Machine design: The laboratory stand dissolver consists of machine frame, the Lifting device, the drive for mixing tool, the telescopic hood with Spring contact pressure, the Collet and the control panel (non-ex) with control and compact controller. The container (customer) and the telescopic hood form one in working position closed mixing room. The hood is intended, a hose connection Dcedpfjd Edm Ssx Ac Noc It is used according to the purpose. The drive of the mixing tool with a speed adjustment is by means of Frequency converter fitted. The arrangement, performance and speed of the Motors are indicated in the enclosed drawing of the project. On the display of the compact controller can the speed of the mixing tool, the Mixing time / mixing time, mixing sequences, as well as other functions are displayed be. Operation Switching on and off is done via corresponding buttons in the control cabinet Lifting of the mixing tool drive Lifting is carried out of the hub motor is switched on. This runs only as long as the Push button (2-hand safety circuit on-on) is pressed. After releasing the button

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-200 EA Elektro-Automatic Electronic Load (2,4KW) 0-80V 0-200A Technical data: Mains input: Mains voltage 115V/20V switchable Mains frequency 50/60Hz Mains fuse T2.5A DC input: Input voltage U rated 0...80V Input power P rated 0...2400W, with temperature-dependent derating Dcedpfxouv Ewre Ac Noc Continuous power 1500W at 20°C environment Input current I rated 0...200A Overvoltage protection limit 1.1 * U rated Maximum permissible input voltage 100V Voltage regulation: Setting range 0...80V Resolution display 100mV accuracy

Condition: used, GRIESER Type: VPL 3.0 Total volume of mixing chamber 3.0 liters Usable volume 0.3 to 2.0 liters Pressure in mixing chamber 0 to 1.2 abs. Pressure in stainless steel double jacket: N/A Critical speed 1800 rpm Speed range under load Blade mixing tool 38-282 rpm Scraper 9-90 rpm Dcodpfx Aov E I N Eec Noc Rated voltage: 3/PE/50Hz, 400V L/PE/N/50Hz, 230V Control voltage: 24V DC Power: 1.3KW Rated current: 5.0A Main switch: 32A Fuse: 16A Weight: 250 kg Sold ex location! Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Dedpfjd Nfq Isx Ac Njcc Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Chamber measure L 350 mm Chamber measure B 350 mm Chamber Measure H 350 mm Maximum temperature 260°C Digital screen Yes Electric connection 230 V Total size L 830 mm Total dimensions B 910 mm Total Measure H 560 mm Type: LCC1-16NV-3 Condition: used/used Delivery: (See picture) (Changes and errors in technical D

Condition: excellent (used), EA Elektro Automatik Model: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19" Rack – Laboratory Power Supply 0-80V / 0-170A, 5000W For sale is a high-quality programmable laboratory DC power supply from the renowned manufacturer EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Key features: - Autoranging (flexible combination of V/A up to maximum power) - Remote sense (up to 2.5 V compensation) - Low ripple: < 10 mV RMS / < 100 mV pp - Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus - Analog control (0–5 V / 0–10 V) - Fan-cooled, robust industrial design Technical data: Dedpfx Aow S T Rljc Nocc - Output voltage: 0 … 80 V DC - Output current: 0 … 170 A - Maximum power: 5 kW - Construction: 19" rackmount, 3U - Efficiency: approx. 93% - Weight: approx. 20 kg Scope of delivery (see photo): - EA-PS 8080-170 3U power supply - Power cable (Specifications and technical details subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: used, This listing is for a Thermo Fisher Scientific A500PV Laboratory Refrigerator The unit is in full working condition and is ready for immediate release Dcodpfx Aexv Dn Iec Nsc

Condition: used, This listing is for a Labcold Blood Bank RDBB11601 Laboratory Refrigerator. Dcodpfx Aoxx Awtoc Njc The unit is in full working condition and is ready for immediate release. .

Condition: used, This listing is for 1 of 3 Sartorius Practum 513-1S Laboratory Balances The unit is in full working condition and is ready for immediate release. The Practum series is described by Sartorius as offering “best value for your money, without compromises in precision and reliability.” The model 513‑1S is one of the higher‑capacity versions of the Practum range: a capacity of 510 g, with a readability (resolution) of 0.001 g (i.e., ±1 mg) for that capacity. It uses the typical features of the Practum line: rugged housing (aluminium die‑cast base and ABS housing) and technology built for standard applications. Connectivity: has a Mini‑USB interface for outputting data to a PC or compatible printer. Weigh‑below hook capability (for e.g., hanging weights beneath the balance) is supported. A front level bubble and adjustable feet support easy leveling, which improves accuracy and repeatability. Mechanical overload protection is built in to help ensure durability. The Practum 513‑1S is well‑suited for standard analytical/precision weighing tasks in laboratories where you need to weigh up to ~ 510 g with 1 mg resolution. Dcsdpfjxrt Ntsx Ac Nec Typical use‑cases: formulation work, general sample weighing, quality control, density determination, routine laboratory tasks. The documentation mentions modes like counting, percent weighing, averaging and “unstable conditions” for the broader series. Because of its resolution and capacity, it's a good fit when you don’t need ultra‑fine microgram resolution but need relatively high capacity with milligram resolution.

Condition: used, Cherwell Lidis 10 Machine Dedpfxjxzh Hfs Ac Necc

Condition: used, This listing is for a Liebherr LCv 4010 Mediline Laboratory Fridge Freezer The unit is in full working condition and is ready for immediate release The Liebherr LCv 4010 MediLine is a combined laboratory refrigerator and freezer designed to provide reliable temperature management for laboratory samples. It features a net capacity of 240 liters for the refrigerator compartment and 105 liters for the freezer compartment. The refrigerator operates within a temperature range of +3°C to +16°C, while the freezer maintains temperatures between -9°C and -30°C. The unit measures 2003 mm in height, 601 mm in width, and 618 mm in depth. Dodoxv D E Hjpfx Ac Necc The Liebherr range offers constant operation with excellent temperature stability. Built with innovative premium quality and an outstanding design, these units are engineered for low energy consumption, ensuring efficient laboratory function. Liebherr refrigerators are equipped with an advanced controller featuring inbuilt audible and visual alarms as standard. ATEX spark-free models are also available for the safe storage of samples and flammables. Features: ✔ Upright Fridge / Freezer Combi Model ✔ Digital Temperature Display ✔ Forced Air Cooling for the refrigerator ✔ Efficient Refrigeration System ✔ Temperature Alarm ✔ Temperature stability and consistency (EN 60068-3) ✔ Environmentally Friendly Refrigerants ✔ Defrost: Refrigerator – Automatic ✔ Defrost: Freezer – Manual ✔ 2-Year Warranty This model is equipped with an advanced electronic control system, ensuring precise temperature regulation. It also includes audible and visual alarms to monitor temperature deviations, enhancing sample safety.

Condition: excellent (used), Mettler Toledo Type: TGA/DSC 1 STAR® Description For sale is a METTLER TOLEDO TGA/DSC 1 STAR® system, a high-quality and precise laboratory instrument for thermal analysis of materials. The device combines thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) in a single system, making it ideal for applications in industry, research, materials testing, and quality assurance. Features & Applications - Thermogravimetric analysis (mass changes) - DSC analysis (heat flow, melting points, Tg) - Analysis of plastics, polymers, chemicals, pharmaceuticals, and materials - Temperature- and time-dependent measurements - High precision and stability - Network and PC-connectable (STAR® system) Technical Data (approx.): Dodpfxjx H R Ure Ac Njcc - Dimensions: approx. 500 × 500 × 600 mm - Manufacturer: METTLER TOLEDO - Model: TGA/DSC 1 STAR® - Sensor type: SDTA FRS2 - Power supply: 100–240 V / 50–60 Hz - Power consumption: approx. 300–600 W - Weight: approx. 35–45 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and correction!) Please feel free to contact us by phone for further questions.

Condition: good (used), laboratory power supply -0-1 A -0-20 V Dedpfx Aob A N Sfsc Njcc -Weight: 5 kg

Condition: refurbished (used), The unit has been refurbished. Dimensions (outside): 31"W x 26"D x 61 1/2"H Dimensions (inside): 24"W x 19 1/2"D x 28 1/2"H Power: 208V, 3ph, 60hz, 39A Cold Water Press: 200-600 KPa Warm Water Press: 200-600 KPa Dsdpfxsmrqcxs Ac Nocc Demi-Water Press: 200-600 KPa

Condition: ready for operation (used), functionality: fully functional, Nitrogen : 30 L/min 6.9 bar - 1.059 CFM 100 psi Min/ Max Operating Temperature : 5ºC - 25ºC / 41ºF - 77ºF Max Relative Humidity : 70% Maximum Altitude : 2000 Meters Pressure Dewpoint : -40ºC / -40ºF Particles : < 0.01 micron Suspended Liquids : None Phthalates : None Noise Level : 57 dB(A) Electrical Requirements : 230v 50/60Hz 8.4A Power Consumption 1932 watts Dsdpexlhcbofx Ac Nscc Dimensions (cm/ ins) : 95 x 59 x 71 / 37 x 23 x 28 Weight (kg/ lbs) : 145 / 320

Condition: ready for operation (used), Beckmann coulter SX4750 Rotor Max Rpm 3750 680 g Dedpsxtagbofx Ac Necc Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), Features: Maximum speed 15,000 rpm (depending on rotor) Minimum speed 300 rpm Maximum RCF 21,885 x g (microliter rotor) Temperature set range -9°C to +40°C Run time Standard mode: 1 min - 9 h 59 min, hold = permanent Extended mode: 1 min - 99 h, hold Power rating 120V, 60Hz, 12A Power consumption 1220W Dimensions (W x D x H) Djdpfxoxqq R Sj Ac Nscc 29 x 26 x 14.5 in Weight ~288 lb (~130 kg) Comes with a Heraeus Autoclavable rotor, on the pictures. Good working condition. Please check out our other listings as well.

Condition: used, Specifications Ilmvac Model: LVS 105 T-10 ef Free Air Displacement, l/min. 60/50Hz: 20 / 17 Dodoxx Na Uopfx Ac Nocc Ultimate Vacuum Pressure, torr: 1.5 Maximum Vacuum, in. Hg: 29.86 Tubing needed, I.D. in. (mm): 1/4 (7) Weight, lbs. (kg): 21 (9.5) Power (Kw): 0.83 Input Voltage / Frequency: 90V – 260V, 50/60 Hz Good working condition. Please check out our other listings as well.

Condition: good (used), Laboratory power supply, power supply unit, voltage generator, laboratory power supply device -Input: 230 volts -Output: 100-415 volts -Dimensions: 320/170/H130 mm Dcsdecqp Hhspfx Ac Nsc -Weight: 3.2 kg

Condition: excellent (used), Year of construction: 2010, operating hours: 553 h, overall weight: 210 kg, total length: 1,055 mm, total width: 850 mm, total height: 730 mm, Laboratory autoclave: Systec, Model: DE-150 Volume: 158L Year of manufacture: 2010 Only 553 operating cycles Dodpfx Acjx Dr Eke Nscc External dimensions L/W/H: 1055/850/730 mm Weight: approx. 210 kg

Condition: excellent (used), Manufacturer: Privileg Djdpfx Acsuid Rue Nocc Type: Appliance no: Capacity: approx. 300 l Internal dimensions: 6 compartments 480 x 350 x 200 mm Equipment: 6 safety glass shelves Connection: Temperature: up to 4°C Weight: Dimensions: 600 x 600 x 1,600 mm Condition: good Equipment: Interior antibacterial Refined, super eco - saving system

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter - 4x heating zones - dosing - Control system Dcjdpfx Acou Hik Ds Nsc

Year of construction: 2021, condition: as good as new (ex-display), It has a cylinder for 10 to 135 T and a small additional cylinder for 1500 kg to 7 T. Empty speed 2-10mm second pressing speed 2 mm second table size 1100x650x120mm 800 mm maximum open height table height max. 900 mm travel of the cylinder is 400 mm total height 2900 mm weight 2,3 T 200 L tank Pump with 60 L capacity 5 KW main motor Control system PLC SIEMENS or PILZ RSS4000- S 7 1200 Dcjdpfoigg E Hsx Ac Nec Safety control system PILZ Communication operator/press Color touch screen 10" OMRON/SIEMENS

Condition: used, Microbalance, Laboratory Balance, Precision Balance, Analytical Balance, Scale, Micro Balance METTLER TOLEDO Model XS3DU S/N 1129453969 Part No. 18.11.2.1518.756-1 Year of Manufacture: 2008 Functions: Weighing, Statistics, Formulation, Density, Percentage Weighing, Piece Counting Maximum Capacity: 3.1 g Readability: 0.01 mg Taring Range: 0 … 3.1 g Maximum Capacity (Fine Range): 800 mg Readability (Fine Range): 0.001 mg Repeatability (at nominal load): 6 μg (3 g) Repeatability (fine range at nominal load): 0.8 μg (0.2 g) Linearity Deviation: 10 μg (0.5 g) Corner Load Deviation (test load): 4 μg (1 g) Sensitivity Deviation (test weight): 45 μg (3 g) Temperature Drift of Sensitivity: 0.0001 %/°C Sensitivity Stability: 0.0001 %/a Repeatability (low load): 3 μg (0.2 g) Repeatability, fine range (low load): 0.5 μg (0.2 g) Linearity Deviation: 3 μg (3 g) Corner Load Deviation (test load): 1.2 μg Sensitivity Deviation (test weight): 9 μg (3 g) Minimum Sample Weight (USP): 6 mg Minimum Sample Weight (USP) fine range: 1 mg Minimum Sample Weight (U = 1%, k = 2): 0.6 mg Minimum Sample Weight (U = 1%, k = 2) fine range: 0.1 mg Stabilization Time: 6 s Stabilization Time (fine range): 10 s Interface Update Rate: 23 1/s Draft Shield Diameter: 68 mm Draft Shield Usable Height: 55 mm Weigh Pan Diameter: 25 mm - LCD Touchscreen - RS232C Interface - Printer Type RS-P42 - Tare Function Power Supply: Primary 100 – 240 V AC, 50/60 Hz; Secondary 12 V DC, 2.5 A Terminal/Display Unit Dimensions (L x W x H): 285 x 195 x 80 mm Weighing Cell Dimensions (L x W x H): 288 x 128 x 114 mm Printer Dimensions (L x W x H): 210 x 150 x 90 mm Total Weight: approx. 7 kg Good condition Djdpfx Acswrtbxs Necc