Used Label Punching Machine for sale (66,020)

Condition: used, Year of construction: 2019, Overview This Clever Machines S.r.l. GS 307 is a rotary shrink-sleeve label applicator, built in 2019 and supplied as a complete line together with an STJ3 steam shrink tunnel. It applies partial or full-body shrink-sleeve labels to PET bottles. A single-head sleeve feeding and cutting unit sits over a rotary star-wheel carousel, with the steam-powered STJ3 tunnel shrinking the sleeves downstream. The control system is a modern Allen-Bradley / Rockwell architecture (PowerFlex 525 drives, Kinetix 5500 servo drives and an Allen-Bradley PLC). The line is set up for 500, 1,000 and 1,500 ml PET formats. Technical data - Manufacturer: Clever Machines S.r.l. - Model: GS 307 (line: GS 307 applicator + STJ3 steam shrink tunnel) - Year of manufacture: 2019 - Machine type: rotary shrink-sleeve label applicator with steam shrink tunnel - Applicator: single-head sleeve feeding and cutting system - Capacity: 12,000 containers/h (manufacturer-rated per OEM technical data); seller reports production speeds up to 15,000 bph - Bottle formats: 500 / 1,000 / 1,500 ml PET - Bottle diameter: up to 120 mm - Sleeve-label height: 40 - 350 mm - Application: partial or full-body sleeve labels - Control: Allen-Bradley / Rockwell (PowerFlex 525 drives, Kinetix 5500 servos, PLC) - Power supply: 400 V, 50 Hz, 3-phase; approx. 10 kW installed; 20 A; Icc 10 kA; IP 55 - Compressed air: 6 bar min, approx. 150 l/min (approx. 70 m³/h) - Working height: 1,300 mm - Weight: approx. 1,800 kg Lsdpfxozk U E Te Abzsag Equipment - Clever GS 307 single-head sleeve label applicator - STJ3 steam shrink tunnel - Format / change parts for 500 / 1,000 / 1,500 ml PET bottles - OEM technical documentation Condition Used. Photographs show a clean, well-maintained stainless-steel machine with modern controls and normal signs of production use. The seller reports the machine as being in excellent condition with approximately 3,000 operating hours, dismantled and stored following the end of its private-label production. Availability Immediately available. Location: Italy. The machine is dismantled and stored, ready for loading; preparation, dismantling and truck loading by the seller (EXW loaded). Inspection on request.

Condition: used, Year of construction: 2007, Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data  - Capacity: 18,000 bottles per hour Lsdpfx Ajwhkhhebzoag - Label positions: Full bottle sleeve or partial bottom sleeve - Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  - CLEVER Machines GS 4001 sleeving unit - Shrink tunnel CLEVER Machines STJ 3

Condition: used, Tube end forming machine,Spiro Pneumatic Tube Notching Machine / Assembly Stand, Spiro Manual Tube Notching Machine, Used Machine Laedpjzwxwgsfx Abzjg Technical Specifications Manufacturer: Spiro Development AB (Made in Sweden) Year of Manufacture: 2008 Type: Manual Tube Notching Machine (with pneumatic assistance) Frame Construction: Heavy-duty aluminium machine-building profile frame Operation: Foot-switch-controlled pneumatic operation Design: Adjustable-height and adjustable-distance tube support stand for convenient positioning and machining of long tubes Overall Dimensions Width: 2350 mm Depth: 930 mm Height: 1450 mm

Condition: good (used), Logopak 920 IIP labeller Lasdpsu U I A Esfx Abzjg Serial: 2040294 2004, Print and apply labelling system, high speed pallet labelling, with label and ribbon rolls of up to 1200m, up to 240 pallets per hour, touch screen controls, with manual, 3Ph

Condition: good (used), Year of construction: 2003, functionality: fully functional, controller model: Basis Bosch Typ 3, Standard equipment: Machine - Working area 2500 x 1250 mm - Rotatable tool holder - Automatic repositioning with clamping device - Automatic tool changer with 19 stations - 2 clamping jaws - Programmable clamping device with pre-selectable - Clamping force - Dividing slide 200x200 mm - Part sorting into 2 containers - 2 good part containers - Ball tables - Tool spray lubrication - Punch scrap extraction - Scrap container - Quick shut-off for hydraulics - 10.4" TFT color screen - 3.5" floppy disk drive - Graphics programming ToPs 2000 - ToPs 2000 - Software package for PC (CD-ROM) - Safety light curtain, 2-beam Ledjzv Txpjpfx Abzjag - RJ45 network connection - Network connection including installation Extended machine equipment - Multitool function - Thread forming function - Marking/fast beading function - Roller tool function - Vibration-damped installation Automation - Loading and unloading device - Extended pull-out for raw material trolley - and unloading platform - Manually movable raw material trolleys - Scrap extraction system - Stop system with spread magnet - Sheet metal thickness gauge - Suction frame for loading - Gripper for unloading

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Lodpfjzv Twxox Abzjag Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function Ljdpfx Abezv Sarszeag + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: good (used), Year of construction: 2017, functionality: fully functional, X Working range max.: 2000 mm (without repositioning) Y Working range max.: 1250 mm Control: Bosch PNC-P Machine - C-frame - Coordinated guidance - Linear magazine with 15 positions for clamping jaws and tools - Hydraulic clamping jaws (2 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable retaining device - 1st stop pin (right, inside) - Dividing slide Punching head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable retaining device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 15" TFT color screen - Integrated technology data - Teleservice interface via the internet - Automatic shutdown - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives Extended standard equipment - Ball tables Lsdpfx Aszv Safobzoag - Chip container - Initial oil filling - Additional clamping jaw - Foot switch for start - Warping detection - Vibration-damped installation - 5 RTC cassettes with die plates

Condition: excellent (used), Year of construction: 2024, operating hours: 3,540 h, functionality: fully functional, punching force: 280 t, X working area max.: 3080 mm Y working area max.: 1540 mm Operating hours: 3540 hrs Lajdoy N Dwrjpfx Abzsg Control: CNC control LABOD with graphics Standard equipment Hydraulic punching machine - Punching force: approx. 280 kN (28 tons) - Throat depth: approx. 1750 mm - Max. punching diameter: 70.0 mm - Max. stroke height: 90 mm, steplessly programmable up and down via control - Table width left + right: 3430 mm each - Table depth: 3160 mm - Table height: 900 mm + 8 easily exchangeable cassette holders + Rotary drive, tool holders top and bottom continuously rotatable 360° + 1 piece, indexable Revotool tools + Programmable clamp positioning + Scrap slug extraction system + Spray device + Brush table + Brush table extension tables + Multitalk, USB, SD memory card and network connection + Digital stroke height adjustment + Three-sided safety light barrier + Various intermediate matrix plates for Trumpf tooling sizes 1 and 2 + Tooling package + 1 set of keys and operating manuals + Boschert EasySharp tool grinding device

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 818745 / (PPS 2013- 001), This machine was updated in 2013 with a two-hand safety system. It is a semi-automatic machine that prints labels and presents them in a fixed position. The operator places the box in the fixture and presses the OK button with both hands for safety. Afterward, the label will be applied. The unit consists of an Allen printer 53XL80 and a table-top version – Herma 414 from 2011. The table height can be adjusted by pressing a button. The control system is integrated into the HERMA 400 labeler. Machine capabilities: Labeling of cartons. Output: max. 30 pcs./min. Size – Cartons (55 x 30 mm and 95 x 120 mm). Label specifications: Laedpfx Aszx D I Tobzog Label size: 70 x 20 mm, 100 x 70 mm, 100 x 45 mm, 140 x 25 mm. Label specifications: K: Core diameter 76 mm R: Reel diameter max. 300 mm B: Label width max. 160 mm L: Label length max. 800 mm Label winding outside.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Lodpszxzagjfx Abzeag Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Pres En: 6,50 m Pres Genişlik: 4,50 m Dakikadaki Vuruş Sayısı(maksimum): 70 spm Ledpfxszxqz Tj Abzjag Çalışma Reglajı: 300 Kurs Değeri: 80-360 Used machine

Condition: new, Year of construction: 2026, functionality: fully functional, D-T50 – CNC Turret Punch Press | Heavy Duty CNC Turret Punch Press – D-T50 | 500 kN | Sheet size 2500×1250 mm Heavy-duty CNC turret punching machine engineered for high-volume sheet metal fabrication. With a punching force of 500 kN and a stroke rate of 160 hits per minute, the D-T50 guarantees excellent productivity and precision. Key Specifications: • Capacity: 500 kN • Hit Rate: 160 strokes/min • Sheet Size: 2500 × 1250 mm • Max. Sheet Size (with single reposition): 5000 × 1250 mm • Max. Sheet Thickness: ≤ 6.35 mm • Accuracy: ± 0.1 mm • Feeding Speed: 80 m/min • Turret Stations: 16 / 24 / 32 • Air Pressure: 0.65 MPa • Machine Dimensions: 5000 × 5200 × 2300 mm ✅ High hit rate – ideal for mass production ✅ Extended sheet capacity with repositioning up to 5000 mm ✅ CE certified | Warranty included | Spare parts & service available D-Y80 – CNC Turret Punch Press | Heavy Duty | Thick Plate CNC Turret Punch Press – D-Y80 | 800 kN | Thick Plate up to 15 mm Heavy-duty CNC turret punching machine designed for processing thick sheet metal. The D-Y80 accommodates material up to 15 mm thick, delivering 800 kN punching force — perfect for structural and heavy-gauge tasks. Key Specifications: • Capacity: 800 kN • Hit Rate: 100 strokes/min Lodpey Swn Nsfx Abzeag • Sheet Size: 2000 × 800 mm • Max. Sheet Thickness: 6–15 mm • Accuracy: ± 0.15 mm • Feeding Speed: 60 m/min • Turret Stations: 6–12 • Air Pressure: 0.65 MPa • Machine Dimensions: 4100 × 4000 × 2400 mm ✅ Exceptional punching force – specialist for heavy-gauge sheet metal ✅ Robust design for demanding industrial applications ✅ CE certified | Warranty included | Spare parts & service available

Condition: good (used), Year of construction: 2006, machine/vehicle number: 06202305, functionality: fully functional, total length: 14,000 mm, working width: 360 mm, Schober Converting Machine Lodpfxsw Ec U Ie Abzoag - Die-cutting units - Reel to sheet - Fanfold - Magnetic stripes - Air shock web width 360 mm

Condition: like new (used), functionality: fully functional, ESPERA ES 5000 ID.NO. 2779 Espera ES 5000 price labeler / Check scale this machine applies the label from the top of the package. Dimensions 155 x 90 cm Height 150 cm. Band width 30 cm. Wave length 37 cm. Lajdpfx Aeua D Injbzog

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Laedszil S Ijpfx Abzeg Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Year of construction: 1977, Stamping Press Manufacturer: Bruderer AG, Arbon, Switzerland Type: BSTA 110 Ljdpfxszil Sus Abzsag Serial number: 4343 Year of manufacture: 1977 Press force: 110 tonnes Stroke rate: 100–850 strokes/min Stroke (adjustable): 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment: 89 mm Max. tool installation width: 1,170 mm Max. strip feed width: 400 mm Strip feed height above clamping plate: 80–180 mm Bed opening: 1,120 x 400 mm Connected load: 50 kW Supply voltage: 3 x 380 V AC, 50 Hz Control voltage: 24 V AC Compressed air connection: R ½", 6–10 bar Machine dimensions (H x W x D): 3,930 x 3,320 x 2,250 mm Total weight incl. strip feed: approx. 24,600 kg Strip Feed Unit Manufacturer: Bruderer AG, Arbon, Switzerland Type: BBV 320/200 Max. feed: 200 mm Max. strokes/min: up to 1,000 (feed-dependent) Accessories Kohler unwinder Heспо straightener SYS PHS 5000 Sound-insulating enclosure (orange)

Year of construction: 2012, operating hours: 25,897 h, condition: refurbished (used), Labelling machine Wilux DLS 2100 / WLS-1206-LH-PA-90°, year of manufacture: 2012, Serial number: 25897 Max working width: 120 mm Max. roll width 80 mm Electric connection: 230 V, 50 Hz, 500 W Own weight: 50 kg Total dimension L 1000 mm x W 800 mm x H 1900 mm Description Including mobile frame, documentation available Working speed 30m per minute Saves in the software the models of over 100 labels Lodjg H Tmbjpfx Abzjag It has both configurations on the left LH and on the right Rh, at the customer's option Luminous LCD display (the display changes colour depending on normal mode, warnings, and faults). The control panel is 90 ° rotatable Label counting system Check the labels and any label slips on the roll The label glueing system can be set as fixed or as variable with Tacho The controls are fully integrated into the machine For the Romanian companies, there is the possibility of selling in instalments. Price Euro 2.900 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Iwasaki LDH 200 label printing machine, machine number 1499, 2 colors, die-cutting unit, embossing unit, various mounting plates, laminator, UV dryer, unwinder, slitter-rewinder, working width: 20 cm, in good condition, available immediately. Iwasaki LD 200 label printing machine, machine number 1174, 3 colors, die-cutting unit, various mounting plates, UV dryer, unwinder, slitter-rewinder, in good condition, available immediately, working width: 20 cm. A total of 3 machines are available (2 Iwasaki and 1 Labelmen). Working widths: 20 cm and 18 cm. Ljdpjiphikefx Abzjag If you are interested, we would also be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our facility after prior appointment.

Condition: like new (used), functionality: fully functional, Hydraulic punching machine Brand: Boschert Model: Ecco Line EL 500 Digital Features: Punching force: 28 t Work table dimensions (width x length): 500 x 1000 mm Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) Ledpforn Swkex Abzeag Maximum die diameter: 105 mm (up to 1 mm sheet thickness) Maximum number of strokes: 180 strokes/min Switch-on value: 5 kW Voltage: 3 x 400 V / 50 Hz Total weight: 2 tons Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 tool drawers Foot pedal Includes all the accessories shown in the pictures.

Condition: used, Year of construction: 2023, Labelling machine for the cold-glue application of paper front, back and belly labels onto glass bottles. Equipped with a Domino CO₂ laser for label marking. The labelling machine was upgraded in 2023 with a mechanical overhaul and a refurbishment of the electrical systems. Additional title: cold glue labeling Capacity appr.: 60000 bo/h Current: 32 A Voltage: 400 / 230 V Frequency: 50 Hz Ledpfx Aozu Rzlsbzoag Formats: 0.5 l Longneck Operation / Control: Simatic S7-1500 Position: in stainless steel housing on feet Base construction: carousel-type machine Features: label magazines; glue pumps; safety doors; control cabinet; operator terminal with visualisation

Condition: used, Stanzautomat für Kalender und Notizbücher / Punching Machine for Calender and Notebooks Stanzautomat / Calender - Block Punching Machine Plastograph PZ 599 Baujahr / Year 1998 Arbeitsbreite / Working width 120 - 600mm Papierlänge / Paper length 100 - 550mm Arbeitsbreite min. 95mm - max. 600mm Hubzahl einstellbar / number of Strokes adjustable 30 - 120/min. Flachstapelanleger / Flat Pile Feeder 5 Stanz-Formen / 5 Punching Tools: Types Wire-O 2:1 / 3:1 - Plastik-Effekt / 3:1 4x4mm / 3:1 4x6mm Werkzeug 4x4mm mit Daumenstanzung / Tool 4x4mm with calender hole punch Laodpfjzuz R Dsx Abzjg Auslage Rüttler / Delivery Jogger Panel Operation and Controls Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Engine and transmission for GRM 80 – according to the previous owner, the transmission was overhauled and has not been used since. Laodpfozw I Hqsx Abzsg ATTENTION!! This offer includes only the engine and transmission!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, punching force: 28 t, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 6 mm, punching diameter: 76 mm, overall weight: 16,000 kg, throat depth: 1,500 mm, Equipment: safety light barrier, Boschert Multipunch 1500 8-station tool changer incl. 4-station and 8-station multi-tool base bodies (with current tooling consisting of 18 punching tools) Punching force: 280 kN (28 tons) Ljdpjzw Dz Dsfx Abzjag Travel ranges: x – 30500 mm (repositioning up to 9999 mm) y – 1580 mm Punch arm overhang: 1850 mm Tooling system: Trumpf Gr2 (76mm) as well as Boschert Revotool Labod 32065 graphic control / workshop programmable Max. sheet thickness: 6 mm (clamp opening) Max. installation height: 90 mm, stroke length 30 mm upwards and downwards, steplessly programmable. Table width, left + right: 3250 mm each Table depth: 3250 mm Table height: 900 mm Overall width: 6860 mm Overall depth: 5040 mm Overall height: 2080 mm Drive power: 25 kVA Machine weight: 16,000 kg Hydraulic oil capacity: 160 l Color: Blue RAL5017 / Light gray RAL7035 Machine year of manufacture: 2011 Ball roller table Punching slug extraction Fast hydraulics (400/800 strokes) very well-maintained condition new screen with accessories

Condition: good (used), Year of construction: 1998, Boschert TRI1000 x 2000 CNC Z TRUMPF quick tool change system Punching force: 280 kN (28 tons) Travel distances: x – 2000 mm (adjustable up to 9999 mm) y – 1200 mm Punch arm reach: 1350 mm 3 punching heads, Trumpf tool system, size 1-3 (105mm) Head 1-3 Control system: Labod 32040 graphic control / workshop programmable Max. sheet thickness: 6 mm (clamp opening) / 10 mm Stroke height: 45 mm, infinitely adjustable upwards and downwards Lasdpfx Aoizctcebzsg Table width left + right: 2100 mm each Table depth: 1800 mm Table height: 900 mm Overall width: 4082 mm Overall depth: 3500 mm Overall height: 2080 mm Drive power: 20 kVA Machine weight: 11,200 kg Hydraulic oil capacity: 80 l Color: Blue / Light Grey RAL7035 Machine year of manufacture: 1998 Good condition / refurbished, new safety light barriers New memory module with USB/SD card and LAN New HMI with display Lots of accessories 4 tool cabinets suitable to be placed under the machine table