Used Lab Extruder for sale (2,047)

Year of construction: 1993, condition: ready for operation (used), A counter-rotating side-feed twin-screw extruder Krauss-Maffei used in the coextrusion process is available. Screw diameter: 40mm, material: rigid PVC, screw speed: 50rpm, throughput capacity: approx. 50-80kg/h, operating hours: approx. 42100h. Including roller guide with subframe. Documentation available. An on-site inspection is possible. Kljdpfx Asyvix Uekxjr

Year of construction: 2022, condition: used, Model: TJ-750 Suitable Sheet: PP/PS/PET Max. Sheet Width: 750mm Sheet Thickness Range: 0.35-2mm Screw Rod Dia.: 75mm Screw L/D ratio: 40:1 Main Motor Power: 110kw Total Power: 350kw Max. Output: 300-400kg/hr Power supply: AC 380V, 50Hz, Three-phase, Four-wire Dimension: L22500xW3200xH3600mm Weight: About 15T Ksdoyvh Ubepfx Akxslr

Year of construction: 2020, condition: good (used), functionality: fully functional, Great offer! Extruder Farmet FE1000 Clever Max, ideal for texturate/pet food/ fish food/grain. With Clever command box, including PLC, frequency changer, touchscreen, SS steam conditioner and cutting head. Complete solution for manufacturing various products/mixtures. Klsdpoxfcwmsfx Akxor Capacity 1.000-1.800 kg/h Extruder was working for 2 years, the rest of accessories never used!

Condition: good (used), Year of construction: 2001, Extruding pressing line for soybean, Instapro, made in 2001, consisted of 2 extruders, 2 presses, original AMA automatic filtration for oil, and cooler for the cake. Capacity is up to 1.200kg/h. Kljdsxuahbepfx Akxor

Year of construction: 1999, operating hours: 16,484 h, condition: good (used), Brand: Collin Lab & Pilot Solutions GmbH Ksdpfx Aeyub Rlskxolr Extruder model: E 30 M Low Boy Screw type: Single screw Screw diameter: 30 mm L/D ratio: 25 mm Operating hours: 16,484 h

Year of construction: 1999, operating hours: 17,620 h, condition: good (used), Brand: Collin Lab & Pilot Solutions GmbH Extruder model: E 30 M Low Boy Screw type: Single screw Screw Ø: 30 mm L/D ratio: 25 mm Operating hours: 17,620 h Year of manufacture: 1999 Kljdpfxeyub Nbj Akxer

Condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 180 kg, empty load weight: 150 kg, shovel volume: 1 m³, Year of construction: 2026, LK100 Laboratory Jaw Crusher - Stone crusher pilot scale crusher Ksdoytnl Tepfx Akxslr

Year of construction: 2024, operating hours: 10 h, condition: like new (used), functionality: fully functional, Extrusion Line with Densifier – Ideal for Recycling Applications This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins Kjdpfx Aketziudoxelr • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials.

Year of construction: 1989, operating hours: 24,048 h, condition: good (used), machine/vehicle number: DS 85 777, Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Klodpjvuzqzsfx Akxjr Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Connection Load 90 kW

Year of construction: 2020, condition: new, Oxygen and temperature measurement in molten metals Kledpfogqr A Dsx Akxsr

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer Kedpfx Aovfxqyjkxjlr 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, Extrudex Extruder complete line with UWG (underwater pelletizer) Technical data: Output: 300–500 kg/h, depending on feed material Year of construction: 1995, but completely overhauled in 2018 and in as-new condition since then Included in the line: Extruder Complete control system Sieve changer "Kreyenborg" K-SWE 150 Ekochem RW-400 underwater pelletizer + WP-220 centrifuge Vibrating screen (classifier) Storage hopper (10 cbm) Chiller for water (cooling capacity: 80 kW) Various smaller peripheral devices Kedpfjyrn Rtjx Akxjlr Sale is also possible without the underwater pelletizer, alternatively with strand die, water bath, and strand pelletizer.

Operating hours: 54,000 h, condition: ready for operation (used), functionality: fully functional, CINCINNATI PROTON 60-30G Kledpfx Akeyrihgexer Screw diameter: 60 mm, L/D = 30 Grooved feed section Throughput: approx. 450 kg/h PE Motor (DC drive): 163 kW Screw speed: max. 221 rpm Tool zones: 5 pcs + 1 pc for adapter Melt pressure & temperature sensors included Control system: Cincinnati EXc Pro-NT Cylinder in bimetal design – condition: good Screw with wear-protection and hardened feed section – condition: good Dimensions (L x W x H): 2,580 x 1,430 x 1,800 mm Weight: 2,500 kg

Year of construction: 2004, condition: excellent (used), Twin-screw extruder Rollepaal T-REX 2-90-30 Application PVC PIPE The extruder is in very good condition and ready for operation. Location: Germany:D-26345 Bockhorn-Grabstede, Bahnhofstr 6 The extruder is my property Kedpfxoxcp T Ne Akxolr

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version Klodpfxstqu Dio Akxer The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. 5) The automatic filling system activates for the new product.

Condition: used, Used Winkworth model ZX500-6 stainless steel jacketed z-blade mixer / extruder. Approximate working capacity 500 litre with total capacity 778 litre (product dependent). 304 stainless steel chamber measures approximately 1,090mm long x 956mm wide x 735mm deep. Unit has domed hood/lid with clamps. 304 stainless steel external jacket. Each Z-blade driven by 30kw motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Kledsykn Tfjpfx Akxjr

Condition: good (used), Year of construction: 2006, machine/vehicle number: Serien Nr. 64019447, Used Coperion Werner and Pfleiderer ZSK 34 Mvc twin-screw extruder for sale. The extruder was used for powder coatings Klsdpfx Ajvcyk Nokxer

Year of construction: 2017, condition: good (used), Used Xtrutech extruder XTS 24 available. The extruder is fully operational and was used in powder coating applications, supplied with many spare parts. We can offer the extruder with Brabender dosing and a cooling belt. Kodpfx Aevcynujkxolr

Condition: new, functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off Klsdpfxsrg Ebcj Akxer - Control system

Condition: excellent (used), Year of construction: 2015, total power requirement 5,5 kW Kedpfjyiu N Rjx Akxolr

Condition: excellent (used), functionality: fully functional, Silverson 150l Inline Lab Mixer With Brook Hansen 0.75kW Motor Klodpfx Aeym Al Iekxjr Complete on trolly for easy transportation. Removed from "blue chip" pharma company in Cork. IE

Condition: used, Used Becomix model Beco Mini Lab homogenizing mixer.  Manufacturer: Becomix. Capacity: Working capacity maximum of 5 Litres approximately Dimensions: 820mm x 820mm x 1250mm high approximately Pressure: -1/+1 Bar maximum working pressure  internally; 4 Bar maximum working pressure of the external jacket Conical welded bottom with a clamped dish top. Pressure and vacuum sealed by a double acting axial seal rings and cooled by barrier water flow. Bottom entry homogenizer: Power 1.55kW Torque 2.5Nm Weight: Estimated: Kg250.0 Kjdpoyhd I Hsfx Akxolr Dimensions: 820mm X 820mm

Condition: used, Year of construction: 2008, machine/vehicle number: ET226, Machine Overview Automatic inline pressure‑sensitive labelling machine equipped with two self‑adhesive application stations for front and back labels. The system conveys containers in a linear path and provides positive product control via an integrated spacing device, wrap/rolling unit and a top hold‑down counter‑belt. At the machine exit a dedicated smoothing system ensures optimal label adhesion and finish. The unit is suited for medium to large containers in the 1–10 L range and has been refurbished in 2022 to extend lifecycle and reliability. Designed and built by P.E., model PACK LAB, year of manufacture 2008. Key Technical Data Configuration: Linear labeller with 2 self‑adhesive stations Labelling method: Pressure‑sensitive (adhesive) labels Label placement: Front and Back (single or dual application) Optical centering: Not equipped (mechanical guidance and product handling) Container range: 1–10 L containers (typical rigid bottles/cans with stable base) Product handling: Container spacing device, wrap/rolling unit, top hold‑down counter‑belt Outfeed: Label smoothing system at machine exit Protection class: IP54 (machine and electric motors) Year: 2008 | General overhaul: 2022 Productivity: 6000 bph Automation & Control Control architecture: Industrial PLC‑based control with 24 VDC auxiliaries for machine logic Electrical distribution: 400 V ±5%, 50 Hz, 3P + N + PE (neutral and separate protective earth) Instrumentation supply: 24 VAC / 230 VAC Operator interface: HMI with recipe/format management and station status (typical for this series) Ksdpfx Asyhcgzekxjlr Sensors and interlocks: Safety‑interlocked guards, product presence and label application monitoring Line Integration Infeed control: Integrated spacing module stabilizes product pitch before labelling Product stabilization: Top hold‑down counter‑belt and wrap/rolling unit for accurate label placement Outfeed quality: Smoothing/pressure elements at discharge to ensure adhesion and finish Mechanical interface: Linear conveyor path suitable for integration into existing bottling/packaging lines Utilities interface: Standard industrial electrical connections as specified below; no optical centering required Condition & Maintenance Refurbishment: Comprehensive overhaul performed in 2022, including verification of application stations, drive components, belts/rollers, guarding and electrical sections Preventive maintenance: Routine service recommended on label unwind/rewind groups, rollers, belts and sensors according to operating hours and label materials Spare parts: Standard wear components readily serviceable for long‑term support Performance & Versatility Applications: Front and back labelling on a wide variety of rigid containers in the 1–10 L segment (e.g., food, beverages, household/industrial chemicals) Materials: Compatible with common pressure‑sensitive label stocks (paper and film) and standard adhesives Changeover: Recipe‑based adjustments with mechanical guides and positioning scales to reduce format setup time Quality: Stable product handling and final smoothi...

Condition: good (used), Krispy Kreme machine in lovely condition. Try and find another, probably the only one for sale in Europe and in much nicer condition than the ones for sale in the US. Kljdpfx Aevtg U Ajkxjr

Year of construction: 1997, operating hours: 31,850 h, condition: good (used), Conical twin screw extruder - Manufacturer: CINCINNATI - Type: Titan 45 - Conical screws Ø45mm - Year: 1997 - 31850 operating hours - Engine power: 15kW - Flow rate: 120kg/h - Replacement motor Kjdpfjv D Nzmox Akxelr - Replacement vacuum pump - Replacement material feed screw