Used Koordinate Bhorr Machine for sale (91,475)

Condition: used, Year of construction: 2019, operating hours: 17,529 h, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Operating hours: 17,529 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes Iedpfjwgnigsx Afijtn m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21- axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Condition: workshop checked Rigid milling spindle; new bearings With table extension with extendable Frame support 2500 mm Motor 5.5 kW Speeds 3000/4500/6000/8000/10000 rpm Milling stop with 2 adjustment options; one overall stop and one rear removal jaw Suction hoods 120 mm Automatic motor brake Right-left rotation With Haffner feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Iedpfxew I Uins Afietn Location: Flörsheim

Condition: used, Year of construction: 2022, gebraucht 2022 9632 prompt, Zwischenverkauf v Italien 2900 € 1 38 mm Iodjwiqxiepfx Afistn 245 mm 300 mm 320 mm 23 kg 19 cm³ 38 x 1,5 mm 38 x 1,5 mm 35 x 3 mm 30 x 2 mm 35 x 1,5 mm 42 x 1,5 mm 42 x 1,5 mm 50 x 2 mm 50 x 2 mm 50 x 4 mm 20 mm 10 x 25 mm 25 x 20 (stehend), 25 x 1 mm 180 mm 36 mm 10 mm 2,8 U/min 0.9 kW digital adjustment of the bending angle from 0 - 180 ° single phase motor 220V / 900W electric engine brake indicator light for indicating overload basement made of cast iron, suitable for mounting a tripod (tripod not included) 90° bend in 6 seconds foot pedal without tools OPTIONAL EQUIPMENT: tripod € 330,-

Condition: used, Year of construction: 2022, 0,4 - 5 mm Itjdpfoxpn Ufjx Afion Workingpiece thickness from to 10 - 45 mm Feed speed 8 m/min.

Condition: good (used), Year of construction: 2012, ETERNA PE 1620 SA - ELITE Year: 2012 Max. Size: 1620 x 1200 mm Max. Cutting Force: 400 t Max. Speed: 3500 sheets/h Centerline Isdpfx Afexpnrweijtn QuickLock System Chaseloader

Condition: excellent (used), Year of construction: 2006, operating hours: 45,200 h, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM200-700C2 Baujahr: 2006 Schließkraft: 200 Tonnen Holmabstand 560 x 560 mm Schnecken DN: 45 mm Max. Hubvolumen: 305 cm³ Spritzteilgewicht: 278 g/PS Steuerung: MC5 Ausstattung: Itsdpexpnpijfx Afijn Roboter GHS Baujahr: 2004 Verschleißarme Plastifizierung 1 St. Kernzug 1 St. Förderband Sicherheitszaun Ca. 45.300 Betriebsstunden

Condition: used, Year of construction: 2006, functionality: fully functional, Description Headstock and tailstock manually adjustable. Ideally suited for machining one crankshaft type with different strokes. Workpiece Max. center-to-center distance of the outer main bearings: 920 mm Itodpfx Aswm Elfefisn Max. roll arm length (½ stroke + counterweight radius): 195 – 270 mm Max. number of machineable bearings: 8 main bearings, 6 pin bearings Main bearing diameter, min. / max.: 30 / 88 mm Pin bearing diameter, min. / max.: 30 / 84 mm Bearing width, min.: 18.5 mm Stroke, max.: 140 mm Bearing pitch, min.: 29.5 mm Deep rolling machines Max. deep rolling force: 30,000 N Headstock Main drive motor power: 20 kW Deep rolling speed: 120 rpm / 60 rpm Leveling rolling speed: 30 min¯¹ Machine Weight including auxiliary units: approx. 13,800 kg Dimensions including integrated control cabinet and hydraulics (L/W/H): approx.: 4.5 x 2.5 x 2.2 m Max. machining height: 1,100 mm

Condition: excellent (used), Year of construction: 2013, operating hours: 250 h, Lapping Machine Stähli FLM 750 Manufacturer: Stähli Läpp Technik AG Model: FLM 750 Year of manufacture: 2013 Voltage/Frequency: 3x400V + N + PE / 50Hz Power consumption: 11.5 kW Max. current: 25 A Weight: 2500 kg Rotary table diameter: 750 mm Inner diameter of conditioning ring: 300 mm Iodpfx Asxpnnxofietn Rotational speed: 6–75 rpm Drive power: 4.0 kW Number of pneumatic cylinders: 3 pcs Compressed air supply: 6–10 bar Dimensions: 1700 x 1250 x 2200 mm Noise level:

Condition: good (used), Year of construction: 2002, Robust Tilting Spindle Moulder T 26, tiltable from -45 to +45 degrees with 2-axis position control Duocontrol Tilting spindle moulder in excellent specification A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Height adjustment max. 150mm, electric adjustment When adjusting the height, the correction factor for the tilting angle is shown in the upper display, which can then be set on the stop, allowing settings according to drawings Four spindle speeds: 3,000, 4,500, 6,000, and 9,000 rpm Spindle diameter 30mm, quick-change spindle with torque wrench Isdpfx Afjvv H T Rsistn Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of height and fence Fence with lifting device can be swung away (for curved milling work) Table opening adjustable via eccentric table rings, electric adjustment Table extension on right and left with pull-out workpiece support Support can be extended by up to 700mm Table length approx. 2400mm Hinged fence for plunge routing Original Martin aluminium fence jaws with two bridges Aigner Centrex workpiece pressure device 3-roller power feed HolzHer 1117, with 8 speeds, reversible, new rollers Power feed socket, switchable from the control panel Extraction port 2 x 120mm Compressed air connection 6bar Emergency stop switch Some parts of the machine have been newly painted Approx. 7,400 operating hours Operating instructions CE marking Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier."

Condition: excellent (used), Year of construction: 1994, Holz Her Tilting Spindle Moulder with Holz Her Power Feeder Table extension on both sides with pull-out stop Swiveling spindle: Yes, -5 to +45° Height adjustment: manual Tilting adjustment: electric Fence adjustment: manual Height display: digital Tilting angle display: digital Fence position display: scale Spindle diameter: 30 mm Speeds: 1500, 3000, 4500, 6000, 9000, 12000 rpm Motor power: 5 / 6 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 1950 mm Machine depth: 1400 mm Weight: approx. 1100 kg Holz Her Power Feeder, type 1112 – 4 rollers Itjdpfexpm Evex Afien Location: Ex stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg Iedpjuzbaysfx Afijtn The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Condition: excellent (used), Year of construction: 2010, operating hours: 43,000 h, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM160-750CX Itjdpfx Aoxpnkasfisn Baujahr: 2010 Schließkraft: 160 Tonnen Holmabstand 520 x 520 mm Schnecken DN: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht: 228 g/PS Steuerung: MC5 Ausstattung: Roboter, Hersteller: GHS, Baujahr: 2012 Schnittstelle Temperiergerät Verschleißarme Plastifizierung 2 St. Kernzug 1 St. Förderband Sicherheitszaun

Condition: used, Year of construction: 2017, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Itjdpowgndkefx Afion Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21-axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 Ijdpfx Afjxnrtcsietn (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Year of construction: 2019, condition: ready for operation (used), Main Drive Itjdpoxpkpfofx Afisn Number of axis 2 This PEMA Column & Boom HD 4x4 Twin SAW was manufactured in 2019. It features a PEMA control panel with touch screen and WeldControl 100 for precise beam welding. The machine includes twin SAW heads, motorized traveling carriages, and a comprehensive wire feeding system. Ideal for longitudinal-shaped workpieces with a working range of 4m vertically and horizontally. Consider the opportunity to buy this PEMA Column & Boom HD 4x4 Twin SAW laser welding machine. Contact us for more information about this machine. Application Types Welding

Condition: used, Year of construction: 1981, Technical details: work height max.: 1100 mm voltage: 380 / 50 V total power requirement: ca. 15,1 kW weight of the machine ca.: 4,5 t dimensions electric cabinet LxWxH: 1,2 x 0,64 x 1,4 m dimension machine xH: 1,5 x 1,6 x 1,3 m The profile round bending machine can be used for bending thick-walled steel profiles, steel beams and steel rails. The machine works on two gears: 0-4 rpm and 0-6,5 rpm. - 1x driven bending roller can be adjusted vertically by 140mm and - 2x drive rollers with centre distance 360mm - Right and left rotation of the rollers possible Equipment: - Hydraulic power unit, manufacturer TOS - control panel Iodpfx Afowh Rq Njiotn accessories: - various bending rollers without profile *

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Condition: Function tested Itodpfexpla Sex Afijn Equipment and technical data: Milling unit: 6 kW, water-cooled Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Tool changer: 6-position, lateral Drilling head: 9 vertical drilling spindles, 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Groove saw in X direction Control: Twin CAM 32 Vacuum pump: 100 cbm/h Incl. vacuum suction cups Travels: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Installation dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Location: Emsland

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine elektrisch mit Angußpicker Hersteller: FERROMATIK Typ: EE50-55 ELEKTRA 50 evolution Baujahr: 2012 Schließkraft: 50 Tonnen Holmabstand 320 x 320 mm Schnecken DN: 22 mm Dosiervolumen: 29 ccm³ Spritzteilgewicht 26 g/PS Steuerung: MOSAIC Ausstattung: Itjdpfx Afsxpnc Aeien -1 x Kernzug -Angußpicker, Hersteller: WITTMANN, Typ: W702, Baujahr: 2012

Condition: used, Year of construction: 2019, operating hours: 17,349 h, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Operating hours: 17,349 Itjdpjwgnfuefx Afion Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21/C22 axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21- axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: 50, laser power: 12,000 W, cutting speed: 100 mm/min, workpiece weight (max.): 1,500 kg, total length: 260,000 mm, warranty duration: 60 months, working range: 715 mm, Equipment: cooling unit, HSG Laser | TX 3+1 Heavy-duty Tube Fiber Laser Cutting Machine Size: 7026mm, 9032mm, 12036mm, 12050mm Laser source power: 3000 - 12000W Itsdpfx Aertiirjfien Cutting Capacity: Round tube: Φ15-500 (TL Φ15-715); Square tube: □15*15 - 350*350 Rectangular diagonal ≤ 500mm Optional function: automatic loading and unloading system 3+1 Twin-chucks Clamping Cutting Technique

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Model Series 3i-B Main Drive Itjdpfexpkltex Afijn Number of spindles 2 Spindle speed range 3000 Number of axis 5 Movement Y-Axis Movement 300 mm This 5-axis DOOSAN SMX 3100 was manufactured in 2014, featuring a multi-tasking turning center with high rigidity and precision. It offers a maximum turning diameter of 660 mm and a length of 1540 mm. The machine includes a Y-axis stroke of 300 mm and a B-axis rotation of ±120°. It supports a main spindle speed up to 3000 rpm and a milling spindle speed up to 12,000 rpm. If you are looking to get high quality turning capabilities consider the DOOSAN SMX 3100 machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of spindles 1 Spindle speed range 4000 Spindle motor power 22/15 kW Tool taper VDI 40 Number of axis 2 Movement X-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm 280 mm Workpiece X 320 mm Tools Number of index 12 Iedpfxsxpkr Te Afiotn This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 10–5000 Number of axis 3 Itjdpfxjxpklas Afisn Movement X-Axis Movement 450 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Tools Type of tool holder SK40 This 3-axis EMCO Emcomat FB-450 MC was manufactured in 2019. It features a travel range of X450/Y350/Z400 mm, a fixed angle table of 800x400 mm, and a table load capacity of 450 kg. The spindle speed reaches up to 5000 rpm, complemented by a rapid traverse of 5000 mm/min. Includes a Sinumerik 828D interface with multi-touch display and a comprehensive 3-axis control package. If you are looking to get high-quality milling capabilities consider the EMCO Emcomat FB-450 MC machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2012, operating hours: 18,168 h, condition: ready for operation (used), Control Unit Model ITplus Brand HEIDENHAIN Main Drive Number of spindles 2 Spindle speed range 5500 Tool taper VDI30 Number of axis 6 Turret Isdpfx Aexpkp Sjfistn Number of tool slots 12 Rotating tools Yes This 6-axis DMG MORI CTX ALPHA 500 V6 was manufactured in 2012. It features a Heidenhain ITplus control, a 12-holder turret with driven tools, and both C and Y axes for enhanced versatility. Main spindle speed reaches up to 5500 rpm, and the counter spindle up to 6000 rpm. VDI30 tooling interface enhances its capability. A great opportunity to buy this DMG MORI CTX ALPHA 500 V6 horizontal turning machine. Reach out for further details regarding this horizontal turning machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2010, Main Drive Number of axis 3 Movement X-Axis Movement 800 Y-Axis Movement 1000 Z-Axis Movement 700 Additional Equipment Probes: 2 included Itsdsxcb Rgopfx Afien This 3-axis Wenzel XO 87 was manufactured in 2010. It features a robust CMM machine design with X-axis travel of 800mm, Y-axis at 1000mm, and Z-axis at 700mm. If you are looking to get high-quality measuring capabilities, consider the Wenzel XO 87 machine we have for sale. Contact us for more information. Application Types Measuring