Used Kappa 550 for sale (2,772)

Condition: good (used), Year of construction: 2005, functionality: fully functional, The machine was serviced annually under a maintenance contract with Okuma. Okuma Mac Turn 550 W / 9-axis turning-milling center Year of manufacture: 2005, Control system: OSP-E 100 L / Expansion Kit “M” Kit One Touch IGF Milling spindle carriage X/Y/Z/B, Counter spindle W-axis, Main spindle with C-axis, Counter spindle with C-axis, Turret carriage below X/Z axis, Max. turning diameter: 720 mm, Turning length: 2,000 mm, Distance between tailstock center and spindle center: 2,505 mm, Y-axis: 250 mm / +/- 125 mm, Main spindle speed: up to 3,500 rpm, Spindle power: 30 kW Turret below: 12-station without driven tool stations, Nco Dmnbyeyt Nvtoujt Turret below with steady rest, therefore only 9 stations instead of 12, Self-centering steady rest: 35 - 240 mm, Milling spindle: infinitely variable B-axis 0.001°, Magazine: 80-station, Mount: HSK 100, New Forkhart three-jaw chuck Ø 400 mm, value 12,000 €, Counter spindle without chuck, currently with arbors / delivery without arbors, Enlarged main spindle: 110 mm Ø 150/110 mm, Spindle nose: Size 11, 2-stage clamping pressure, Counter spindle as a hollow shaft motor, speed up to 3,800 rpm, Ethernet LAN interface, Renishaw in-process measurement, Additional measuring system for Y-axis, Tool length: 450 mm instead of 350 mm, Nsdey Uhfkopfx Alnscu Door automation for both doors, Chip conveyor, Gravity belt filter with clean tank 900 liters, Supply pump, frequency-controlled up to 20 bar, The machine was serviced annually under a maintenance contract with Okuma. In 2023, the cable carrier for the W-axis, including all hoses, was replaced. In October 2024, the linear guides X/Y/Z were replaced. Work performed by Okuma. Machine cleaned. Sheets and covers removed. 8th axis removed. Travel stand removed and lifted out of the machine. ATC removed and lifted out of the machine. All linear guides removed. Mounting surfaces of the Z-axis cleaned. New linear guide for Z-axis including shoes installed and tightened with the specified torques. New ball screw for Z-axis including bearing mounted and installed. Base plate of the travel stand installed and tightened with the specified torques or screwed onto the shoes. Lubrication lines connected. ATC including attachments installed and connected. New linear guides YA and XA installed and tightened with the corresponding torques. New ball screw YA including bearing installed. Travel stand installed and lubrication lines connected. Base plate XA placed and aligned. 8th axis placed and aligned. H1 turret installed - Install drive motor for the 8th axis - Assembly of 8th axis + new H1 and adjust geometry - Functional test of 8th axis and H1 - Run-in program for B-axis approx. 12 hours, then drain old oil from the 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various sheets - Install chuck - Adjust zero points - Check tool change

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Nsdpfstk N Dkex Alnocu

Condition: new, Year of construction: 2026, machine/vehicle number: 7735357, fuel type: diesel, motor manufacturer: Scania DC13 072A, General information Field of application: Construction Weights Empty weight: 5.215 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 467 x 160 x 245 cm CE mark: yes Other information Fuel consumption: 72 Liter / Hour at 75% Load Generator: Mecc Alte ECO40 3S4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 1750 l Ncjdpfxoy T D Dys Alnju Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Stage V Generator Stage V Aggregaat Stage 5 Generator Stage 5 Genset Stage V Gen set Stage V Generator set EU Stage V Generator StageV

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 3,324 h, load capacity: 5,000 kg, lifting height: 4,425 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,260 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic Condition: Refurbished without warranty Technical condition: Very good Front tire type: Superelastic Front tire condition: New Rear tire type: Superelastic Rear tire condition: New Description: Price includes new UVV inspection and service, very good paintwork, 4x nearly new SE tires, sideshift, 3rd valve, rear and front work lights, roof cover, full free lift, CE certificate. Nsdpfxsy Rbcno Alnocu

Condition: used, Year of construction: 1955, groove width 90 mm drawing length 550 mm Ncedpfx Aoy D A Dyolnju table surface area 400x300 mm a lot of tools

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Cone crusher product group is designed especially for the hardest material, cone crushers are one of the best choices for crushing river gravel, basalt and granite, along with abrasive materials in the mining industry. The working principle of cone crushers is to break the material by compression, by squeezing it between its walls, which are completely covered with resistant mantle and a bowl liner. It has longer life than other crushers thanks to its long life wear parts. Model: FABO CCS-440 Capacity: 300-550 t/h Max. Feed opening; EC 450 mm C 400 mm MC 300 mm Motor: 220-250 kW, Head diameter: 1300 mm Dimensions (width * height): 3100 *2850 mm Countershaft Speed-rpm: 750-1200 Weight: 31000 kg * Hydroset Control * Automatic Load Protection * Practical discharge * High capacity cubic production * High-performance contactless labyrinth * High productivity, low energy production and lower wear costs, long service life and high product yield with desired fine powders. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Ncjdpfx Ajy Tnylslneu

Condition: good (used), Year of construction: 2017, - Cutting width (mm): 4300 - Cutting depth (mm): 4200 - Cutting height (mm): approx. 80 Ncedpfey Tm Dcox Alneu - Power (kW): 16 - Vacuum suction pads: included

Condition: used, Year of construction: 2010, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, An automatic saw with unloading chain conveyors Njdpfx Ajy Tl Slelnscu

Condition: used, functionality: fully functional, machine/vehicle number: 0171793397124, input voltage: 220 V, input frequency: 50 Hz, used Muhr & Bender HIW 550/510 Price negotiable Ncodpfx Aljy Tivusnju

Year of construction: 1999, condition: excellent (used), Max. Saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 manual controls Nedpfx Aloucpqtonecu Pneumatic material clamps Minimum quantity spraying device Table can be rotated on both sides with locking points at 45° Roller conveyor 4000 mm and stops 4400 mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, Line 1 – Hessapp Line 1 consists of 3 Hessapp lathes integrated with gantry loading. Following the turning operations, the line includes: • 2 twin-spindle multi-operation machining centers, make SW BA400, for drilling operations • 1 gear machining machine, make Unisign Univers 6 • Complete robot automation including infeed and outfeed conveyors Line 2 – Maus Line 2 consists of 3 Maus lathes integrated with gantry loading. Following the turning operations, the line includes: • 2 twin-spindle multi-operation machining centers, make SW BA400, for drilling operations • 1 gear machining machine, make Unisign Univers 6 • Complete robot automation including infeed and outfeed conveyors Line 3 – EMAG / Diedesheim / Unisign Line 3 consists of: • 2 EMAG VSC 500 DB machines • 2 Diedesheim VDM55-11 machines • 1 Unisign Univers 6 for gear machining Nsdpfxjy S Tx De Alnocu • Complete robot automation including infeed and outfeed conveyors

Condition: good (used), Year of construction: 2005, functionality: fully functional, Toyoda FH 550, Year of manufacture 2005, Fanuc 31i MA control system, Travel range X/Y/Z 750/800/850 mm, Pallet size 550 x 500 mm, Spindle speed up to 15,000 rpm, Ncodpfxsy S Rp Tj Alnou 60-tool automatic tool changer, BT 40, Coolant system, 70 bar, Chip conveyor.

Condition: new, Year of construction: 2021, Technical Specifications – kappa 400 / x-motion: Saw blade diameter: 250–400 mm Cutting height: max. 133 mm (at 90 degree) Saw blade tilting: 0 – 45 degree Speeds: 3500 / 4500 / 5500 rpm Motor power: 5.5 kW (7.5 HP) Motor voltage: 3x 400 Motor frequency: 50 Hz Sliding table length: Standard 2500 mm Cutting width: 800 mm"X-Roll" system: (maintenance-free, roller bearing guidance) Control system: x-motion CNC control, 3-axis control Control panel: 5.7” (145 mm) TFT touch colour screen Features: Maintenance-free tilting segments: "Easy-Glide" Dust extraction port: Ø 120 mm (bottom) / Ø 80 mm (top) Weight: approx. 900 kgs Nedpfey Nc Dkex Alnjcu The machine is in new condition and never has been used at all.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 550 mm, roller (top) diameter: 550 mm, side roll diameter: 450 mm, roller length: 3,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 70 kW (95.17 HP), warranty duration: 12 months, Equipment: emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The bottom and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overloading * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * Easy roll position reading via three digital indicators * Easy removal of bent parts thanks to hydraulically opening head and automatically lifting shaft * Very user-friendly operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support when bending large diameters * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Njdpfxoxbzpte Alnjcu Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, saw blade diameter: 550 mm, grinding wheel diameter: 150 mm, total width: 1,200 mm, total length: 1,200 mm, total height: 1,250 mm, type of input current: three-phase, input current: 4 A, input frequency: 50 Hz, grinding spindle motor power: 1,900 W, input voltage: 400 V, overall weight: 220 kg, spindle speed (min.): 3,700 rpm, Equipment: rotational speed infinitely variable, Loroch SW 550 machine in good working condition, ready for operation. The machine is suitable for professional workshop use. - saw blade dia. from 100 - 550mm - suitable for HSS saw blades for wood and metal cutting. - HSS saw blades geomeries - A, B, BW, C - Water cooling - additional device for shaping band saw blades Nodpfx Asy Sgqtelnecu - Manual in Czech language (but it is simple machine)

Condition: new, Roller conveyor length 6000 mm Roller conveyor width 550 mm Ncodpfxey H N I Re Alnsu

Condition: new, Year of construction: 2026, machine/vehicle number: 20132586945, fuel type: diesel, power: 440 kW (598.23 HP), motor manufacturer: Volvo TAD1346GE, General information Field of application: Construction Weights Empty weight: 4.860 kg Functional Generator capacity: 550 kVA Njdjxvk Inspfx Alnecu Dimensions of cargo space: 432 x 152 x 243 cm CE mark: yes Other information Fuel consumption: 76.7 Liter/Hour at 75% Load Generator: Stamford S5L1D-D41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 900 l Production country: TR Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: 20250320017, fuel type: diesel, motor manufacturer: Perkins 2506C-E1STAG2, General information Field of application: Construction Weights Empty weight: 5.395 kg Nsdpfxoyzl Atj Alnscu Functional Generator capacity: 550 kVA Dimensions of cargo space: 451 x 160 x 235 cm CE mark: yes Other information Fuel consumption: 81 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 775 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 2806J-E18TAG1, General information Field of application: Construction Weights Empty weight: 6.740 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 542 x 204 x 243 cm CE mark: yes Other information Fuel consumption: 94.5 Liter / Hour at 75% Load Generator: LL6114K Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 1125 l Production country: CN Nodpfx Alow A E T Uonjcu Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = EU STAGE 5 Compliant 50/60 Hz switchable frequency via terminal link 550 kVA Prime power Spark arresting silencer

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 2506A-E15TAG2, General information Field of application: Construction Weights Empty weight: 5.071 kg Ncjdpox S Umisfx Alnou Functional Generator capacity: 550 kVA Dimensions of cargo space: 493 x 166 x 232 cm CE mark: yes Other information Fuel consumption: 73.6 L/Hour at 75% Load Prime Generator: FG Wilson FG29A400 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 888 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, power: 440 kW (598.23 HP), motor manufacturer: Perkins 2506A-E15TAG2, General information Field of application: Construction Weights Empty weight: 3.699 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 380 x 113 x 222 cm CE mark: yes Other information Fuel consumption: 73,6 L/Hout at 75% Load Prime Generator: FG Wilson FG29A400 Ncedpjxpg U Dofx Alnju Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 888 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: 20250214003, fuel type: diesel, motor manufacturer: Cummins QSZ13-G3, General information Field of application: Construction Weights Empty weight: 4.950 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 425 x 160 x 245 cm CE mark: yes Other information Fuel consumption: 74.2 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 775 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery Ncsdpfx Aloxfpr Ronju - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, power: 440 kW (598.23 HP), motor manufacturer: Cummins QSZ13-G10, General information Field of application: Construction Weights Empty weight: 5.350 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 452 x 178 x 262 cm CE mark: yes Other information Nsdpewddwnofx Alnjcu Fuel consumption: 77.1 Liter per Hour at 75% Load Generator: Stamford S5L1S-D4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 995 l Production country: PT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 550 h, load capacity: 1,000 kg, lifting height: 1,560 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,940 mm, battery capacity: 138 Ah, battery voltage: 24 V, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Load center: 600 Mast type: Mono Condition: Refurbished, no warranty Technical condition: very good Front tire type: Vulkollan Rear tire type: Vulkollan Ncodpey Rviijfx Alnju Battery voltage: 24V Battery capacity: 138Ah Battery type: Lithium-ion Battery year of manufacture: 2023 Description: Serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Without paint. - with initial lift

Condition: excellent (used), Year of construction: 2025, Format 4 Kappa 450 x-Motion 2-axis control, height and tilt adjustment Technical data: - Cutting length: 2800 mm - Cutting width: 1300 mm - Cutting height: 155 mm - Max. saw blade Ø 450 mm - X-motion control - Angle scale with length compensation - Extractable Ø 120 mm - Motor power: 10 kW - Year of construction: 2025 Duplex mitre fence Ncsdpfx Aley Rp D Tjneu