Used Kam 40 Profi for sale (24,659)

Condition: used, machine/vehicle number: 5240, Housing for 101 plates. Delivery supply: with 2 end plates of stainless steel. Intermediate plates are not included Plates maximum: 100 Plate formats: 400x400 Platefilter features: Manual spindl Dimension  ca. 300x60x100 cm dimensio between the first plate to the spindle ca. 170cm Fgsdpj Ahlkyjfx Ah Eoi

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, Technical features - Power supply V 200/230 - Phase ph 1 - Installed MAX power kW 2.6 - Production per hour: 0-300 pieces - Sealing bar useful dimensions: 420x280mm - MAX product dimensions: 400x250x160mm - MAX coil dimensions (diameter): 250mm - MAX film reel dimensions (width): 500mm - Work table height: 940mm Fgedpsuakkpjfx Ah Eei - Machine dimensions with open lid: 1160x700x1310mm - Machine dimensions with closed lid: 1160x700x1150mm - Machine weight (net/gross): 90/111 kg

Condition: ready for operation (used), ERD Column Drilling Machine Type B35/40 Fedpfx Ahjztd Ivo Eogi - Machine type: ERD B35/40 - Design: Column drilling machine with gear drive - Drilling capacity in steel: up to 50 mm - Spindle mounting: MK 4 (Morse taper 4) - Quill stroke: 190 mm - Overhang (spindle to column): 325 mm - Column diameter: 140 mm - Table size: approx. 565 x 565 mm - Table adjustment: Height-adjustable, rotatable (360°) - Spindle speeds: 6-speed, manual via belt / lever - 670 / 470 / 295 / 210 / 150 / 90 rpm - Note on speed change: Change speed only when the spindle is running down - Feed types: Manual and automatic feed - Feed speeds: 0.1 / 0.2 / 0.3 mm per spindle revolution (switchable during operation) - Motor power: 2.2 kW (three-phase) - Supply voltage: 400 V Dimensions: L x W x H: 0.9 x 0.5 x 2.05 meters / Weight: 800 kg Errors and omissions excepted.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 4,000 mm, total width: 2,550 mm, total length: 13,900 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 60 dB, input current: 150 A, energy consumption: 75 kWh, Equipment: documentation/manual, rotational speed infinitely variable, Mobile treatment system for digestate, slurry, and slaughterhouse wastewater Biogas plants and animal husbandry operations are facing increasing costs for the disposal and transport of liquid digestate and slurry. This system treats the wastewater on-site, separating it into clean permeate and a nutrient-rich concentrate. The permeate can be discharged, used for irrigation, or as utility water, and the concentrate can be used as fertilizer. The volume that needs to be transported is significantly reduced. The entire system is mounted on a trailer. It is delivered, connected, and put into operation. Foundations, buildings, or permits for permanent installations are not required. PROCESS 1. Pre-separation: equalization tank, peristaltic pump, two cyclones for the removal of sand and heavy solids 2. Ozone oxidation reactor: oxidative decomposition of the organic load with ozone directly in the water stream 3. Lamella separator: separation of coarse suspended solids 4. Microflotation (DAF): separation of suspended particles with microbubbles and ozone 5. Multi-layer filter: fine separation before the membrane stage 6. Reverse osmosis: open-channel modules with parallel spacers, up to 70 bar, very fouling-tolerant. The RO concentrate is returned to the DAF. RESULTS FROM PILOT OPERATION (Evaluation by the Fraunhofer Institute) Fedpfxsw Uf Ihj Ah Esgi Biogas digestate (decanter): - COD: over 20,000 mg/l in the influent, 12 mg/l in the permeate - Total nitrogen: 4,800 mg/l in the influent, 25 mg/l in the permeate - N removal: 99% Slaughterhouse wastewater: - COD: over 20,000 mg/l in the influent, 26 mg/l in the permeate - Total nitrogen: 2,750 mg/l in the influent, 120 mg/l in the permeate - N removal: 95% Pig slurry (separated): - COD: over 20,000 mg/l in the influent, 34 mg/l in the permeate - Total nitrogen: 2,500 mg/l in the influent, 180 mg/l in the permeate - N removal: 91% The values are from pilot operation and laboratory validation. We will determine the performance for your wastewater after a water analysis, and we can also offer an on-site trial run. YOUR ADVANTAGES - Reduced volume for storage, transport, and application - Permeate can be used for discharge, irrigation, or as utility water - Concentrate can be used as fertilizer - Mobile: can be used at different locations, trial run without investment - Energy-efficient ozone oxidation, power consumption per m³ on request - Fully automatic PLC control APPLICATIONS - Biogas plants: digestate treatment after the decanter - Pig and cattle farming: slurry treatment - Slaughterhouses and the food industry - Other industrial wastewater with high organic loads, after evaluation TECHNICAL DATA System type: mobile wastewater treatment, ozone oxidation + DAF + RO Design: 40-ft trailer Process stages: cyclones, ozone oxidation reactor, lamella separator, DAF, multi-layer filter, reverse osmosis RO modules: open-channel, 26.5 m² per module, up to 70 bar COD influent: over 20,000 mg/l (pilot) COD permeate: 12 to 34 mg/l (pilot) N removal: 91 to 99% (pilot) Control: PLC, fully automatic Electrical: 400 V / 50 Hz, connected load 75 kW, fuse rating 150 A MARKETING - Rental with or without operation - Treatment per m³: RIEFILT provides and operates the system; you pay per treated cubic meter - Purchase on request - On-site trial run possible to confirm the performance data NOTES ON THE INFLUENT For the design, we need an analysis of your wastewater (at least TS, COD, N-total, NH4-N, conductivity, pH) and the

Condition: used, ISO 40 collets, various clamping devices, cutting inserts Fgsdpfx Aj Ahq I Aeh Eei two cabinets

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, suspension: steel, 40-ton low-loader with ramps – extensions – hooks for securing machinery – total weight 40,000 kg – unladen weight 8,200 kg – Distance from axle 1 to axle 2: 1410 mm Fgsdpfxjz Hy Ehe Ah Eoi Distance from axle 2 to axle 3: 4530 mm Distance from axle 3 to axle 4: 1410 mm = Further information = Year of manufacture: 2019 Suspension: Leaf spring suspension Front axle 1: Steerable Front axle 2: Steerable Unladen weight: 8,200 kg Payload: 31,800 kg GVW: 40,000 kg Reference number: 48 Please contact Miguel Cubas for further information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), Year of construction: 2020, operating hours: 6,403 h, functionality: fully functional, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, nominal power (apparent): 35 kVA, controller model: Haas NGC-Steuerung, total height: 3,300 mm, total length: 7,400 mm, total width: 2,600 mm, table load: 1,814 kg, overall weight: 13,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22 W, number of spindles: 1, number of slots in tool magazine: 51, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, HAAS VF-10/40 – CNC Vertical Machining Center – Year of Manufacture 2020 High-performance CNC vertical machining center with a large work area, a 15,000 RPM high-speed spindle, and a side-mounted tool changer with 50+1 magazine positions. The machine features a modern HAAS NGC control system with numerous activated functions, including high-speed machining, macro programming, rigid tapping, and rotation/scaling. Technical Data: • Manufacturer: HAAS • Model: VF-10/40 • Year of Manufacture: 2020 Fgjdpj Ahyvyjfx Ah Eji • Control System: HAAS NGC (Next Generation Control) • X-axis Travel: 3,048 mm • Y-axis Travel: 813 mm • Z-axis Travel: 762 mm • Table Size: 3,048 × 711 mm • Maximum Table Load: 1,814 kg • T-slots: 5 × 16 mm • Spindle Speed: 15,000 RPM • Spindle Power: 22.4 kW • Tool Holder: BT40 • Tool Magazine: 50+1 positions • Tool Changer: Side-mounted tool changer • Coolant Tank: 360 liters • Through-spindle coolant (TSC): Activated via control system • Power Supply: 400 V / 50 Hz / 3 phases • Machine Weight: approx. 13,654 kg • Shipping Dimensions (L × W × H): approx. 7,320 × 2,600 × 3,380 mm Control System and Equipment: • HAAS CNC control system with widescreen monitor • High-speed machining • Macro programming • VPS – Visual Programming System • Rotation and scaling • Rigid tapping • M19 spindle orientation • Fourth axis activated via control system • Coolant supply through the spindle activated via control system • Extended program memory: 1 GB • Correction tables • Media display Operating Hours (as of October 30, 2026): • Power-on hours: 15,717 h • Cycle start hours: 6,403 h • Feed hours: 3,735 h • Tool changes: 127,433 • Spindle hours: Not listed separately Technical specifications based on available information and control system photos. Model designation and individual equipment features subject to confirmation. Errors, changes, and prior sale are subject to change.

Condition: excellent (used), Catalog number: 7885 TECHNICAL DATA - Max. main blade diameter: 400mm - Max. cutting height: 120mm - Main blade adjustable up/down and at an angle - Large blade guard - Spindle diameter: 30mm - Cutting length on the carriage: 1400mm - Cutting width with guide: 1300mm - With a sliding carriage Fgsdpfx Ahsztavis Eoi - Guide on the sliding carriage adjustable at an angle - Main blade motor power: 4kW - 2 types of rotational speeds: 3000/4500 rpm - Table dimensions: 1120x1020mm - Table dimensions with extension: 1630x1730mm - Diameter of the dust extraction port: 80mm, 140mm - Dimensions (L/W/H): 3300x2180x1450mm – weight: 1040kg ADVANTAGES – Made in Poland – DTR documentation available – Used saw - Very good condition Net price: 9900 PLN Net price: 2302 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, For sale is a refurbished Gillardon pillar drill press. Fodpfe Ah Dztjx Ah Eegi The machine has been completely disassembled and refurbished (including a new spindle bearing). Gillardon GB 40 VE Year of manufacture 2003 Electromagnetic feed 0.1/0.16/0.25 on the joystick at the touch of a button Infinitely variable speeds 2-speed motor Work light Emergency stop button 200mm spindle stroke 350mm throat Table size 630x535mm Clamping surface 400x500mm MT 4 chuck Keyless chuck 3-16mm Total height 2060mm Weight 500 kg Pickup and inspection in 89558 Böhmenkirch possible by arrangement. Shipping for an additional charge. Forklift available for loading.

Condition: new, axle configuration: > 3 axles, Equipment: ABS, Ebert TL 40 ST special low-loader, continuous flatbed design, self-supporting construction, permissible total weight: 40,000 kg, unladen weight: 8,900 kg, payload: 31,100 kg, dimensions: 14,000 mm x 2,550 mm (also available in a wider version), fully air-suspended, trailing lift axle, SAF axles. Mr. Ebert (Tel. ...) will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! = Further Information = Fedpoyfrfzsfx Ah Ejgi Please contact Tobias Ebert for more information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2017, total width: 2,550 mm, total height: 1,720 mm, suspension: air, tire size: 385/65/22.5, wheelbase: 7,510 mm, color: grey, Equipment: ABS, = Additional Options and Accessories = - Disc brakes = Further Information = General Information Year of Manufacture: 2017 Axle Configuration Tire Size: 385/65/22.5 Brakes: Disc brakes Suspension: Air suspension Rear Axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Rear Axle 2: Max. axle load: 9000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Rear Axle 3: Max. axle load: 9000 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Weights Unladen weight: 5,700 kg Payload: 33,300 kg GVW: 39,000 kg Condition Technical condition: very good Fedpfx Aow Rx S Soh Eogi Optical condition: very good Further Information Please contact Bas Wolfs for further information.

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Format: Fgjdpfx Ahsvphzij Eoi Equipment: 40 nozzles for consistent adhesive application

Condition: ready for operation (used), Year of construction: 2009, operating hours: 35,981 h, punching force: 41 t, sheet thickness (max.): 15 mm, overall weight: 4,900 kg, total width: 2,250 mm, total height: 2,100 mm, product length (max.): 5,800 mm, CNC punch press manufactured in 2009. This BOSCHERT CU-Profi features 4 Amada tool stations and a parting station of 60x10 mm, including tooling. It comes with a tooling package of punch and die sets for stations A and B, along with integrated infeed and outfeed roller conveyors for efficient material handling. If you are looking to get high-quality punching capabilities, consider the BOSCHERT CU-Profi machine we have for sale. Contact us for further details. - Punching Force: 400 kN (40 tons)- Maximum Sheet / Material Thickness: 12 mm to 15 mm (copper/aluminum flat bar: standard 3 – 12 mm, up to 15 mm max; copper up to 10 mm with diameter 31.7 mm, copper up to 12 mm with max. diameter 20 mm)- Maximum Workpiece Width: 15 – 200 mm- Maximum Workpiece Length: Up to 3 m- Tool Stations: 4+1 stations (4x Amada holder size B + 1x separation/cutting station 60 x 10 mm / 60 x 8 mm)- Maximum Punch Diameter: 4 x 31.7 mm or any contour within 31.7 mm (B station)- Stroke Rate: Approx. 85 strokes/min max. (optional fast hydraulics approx. 180 strokes/min)- Stroke Counter: 4,541,086 strokes- Operating Hours - Machine On: 35,855 h- Operating Hours - CNC On: 35,981 h- Operating Hours - Drives On: 35,799 h- Operating Hours - Hydraulics On: 8,465 h- Material Infeed: Material gripper feed via guide unit and AC servomotor; zero-waste gripper design; repeatability ±0.1 mm- Clamping System: Hydraulic Y-axis material clamping before and after the punching head- Parts Discharge: Finished part unloading system downstream of punching head; automatic scrap disposal- Support Surface: Roller support table and guide track system; large support table for copper busbars- Control System & CNC: CNC Control LABOD with graphic path control; DOS-based architecture; 3.5" floppy disk drive; tool library for 500 tools with graphical shape display; automatic overlap and cutting force monitoring- Software & Connectivity: 1x PC version (runs on Windows 95/98/NT 4.0); 1x CNC/CAD (cncKad / Metalix CAD/CAM with DXF, IGES, CADL, DWG import; server-capable); 1x Multitalk (SD card 256 MB storage for ~100,000 programs, USB interface with external cabinet cable mount, 256 MB USB stick, network port with FileZilla Server integration)- Safety: Front light curtain safety barriers and safety interlock guarding compliant with CE standards- Hydraulics: H&L hydraulic unit with oil cooling (4.7 kW standard / 11 kW optional); 160 l oil capacity- Connected Load (Anschlußleistung): 18 – 25 kVA- Power Supply (Netz): 3 x 400 V, 50/60 Hz- Control Voltage (Steuerspannung): 24 V- Required Fuse Protection: 3 x 35 A- Dimensions (L x W x H): 5.8 m x 2.25 m x 2.1 m- Machine Weight: 4,900 kg- Machine Color: Gentian Blue (RAL 5017)Not included in the scope of delivery:- Punch and die sets for stations A and B, punch reduction adapter from B to A, die holder adapter from B to A, separation/cutting tool (excluding copper stock and tooling/punches) Fgjds Ahkaispfx Ah Eei

Condition: used, mileage: 168,200 km, power: 140 kW (190.35 HP), first registration: 03/2017, fuel type: diesel, overall weight: 3,100 kg, fuel: diesel, energy efficiency: B, color: brown, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 6, total width: 2,249 mm, total height: 1,901 mm, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill-start assist, EG9 Garmin MAP PILOT, T55 Electric actuation for right sliding door, T56 Electric actuation for left sliding door, FB4 AMG spoiler lip on tailgate, 7O1 Communication module Hermes, compatible with 2G/3G, BS1 Brake calipers with Mercedes-Benz lettering, CA1 AGILITY CONTROL chassis, CL1 Steering wheel adjustable for tilt and height, CL3 Leather steering wheel, CL4 Multifunction steering wheel with trip computer, CM2 Bumpers and attachments painted in vehicle color, D14 Anodized roof rails, E34 Buffer battery for starting, E70 Switch position, lower control panel, EA1 Audio 20 CD, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12 V socket in trunk/cargo area, ES3 12V sockets for rear seat rows on the right and left, ET4 Active Distance Assist DISTRONIC, EV5 Pre-installation for Garmin MAP PILOT, EY2 Digital extra: Live Traffic Information, EY3 Communication module Mercedes me Connect services, EY5 Mercedes-Benz emergency call system, EZ5 Parking package, EZ7 Active Parking Assist, F65 Exterior mirrors, automatically folding, F66 Lockable glove compartment, F69 Exterior mirrors, electrically adjustable and heated, with integrated turn signal, F72 Exterior and interior mirrors, automatically dimming, FC1 Electronic key in chrome finish, FG0 Center console with roller shutter, FG9 Cup holder that can be attached to the rear armrests, FH7 Decorative elements, wave-like design, anthracite, FP3 Mirror package, FP5 Sport package exterior, FR8 Rear view camera, FS5 Illuminated mirrors for sun visors, FZ5 Anti-theft and burglary alarm system, FZ8 Comfort opening and closing with IR remote control, G42 7G-TRONIC PLUS, H00 Warm air duct to passenger compartment, H12 Auxiliary hot water heater, H15 Seat heating for front passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH4 Air conditioning, by telephone, we are available Monday to Friday until 8:00 PM and Saturday until 4:00 PM!! Further:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! Fgedps Afyknjfx Ah Eoi -All information without guarantee ... more on our homepage

Condition: used, Year of construction: 2015, operating hours: 1,255 h, load capacity: 150 kg, drive type: Elektro, Vertical lift Fedpfx Aeu D Sx Esh Eegi Technical condition: normal Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no return. Viewing possible by arrangement. Our AGB apply. Max. Load capacity: 150 kg (platform 40kg + 1 person 110kg) Operator in basket: 1 Max. Working height: 4 m Built-in height: 1.63 m Max. Height of basket: 1.96 m Max. Max. height of loading platform: 2.87 m Lift of loading platform: 520 mm Internal dimensions of basket: 680 x 650 mm Dimensions of loading platform: min. 450 x 660 mm - max. 650 x 660 mm Power supply: 24 V Battery: 2 AGM 12V/33Ah Charger: 110V - 220V

Condition: used, maximum load weight: 33,470 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2023, Year of construction: 2023, Equipment: ABS, * Kässbohrer tipper silo * First registration: 05-2023 * Volume: 40 m³ * 4 compartments * Lifting axle Fsdpfxs Ahmpnj Ah Ejgi * Independent hydraulic system * Aluminum rims * BPW axles * Tare weight: 5,530 kg * Gross vehicle weight: 39,000 kg * More pictures and videos available via WhatsApp * Information without guarantee, subject to prior sale.

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Welding turntable MB Milano, TGA 75: swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min * Fgedpfx Asu Nkxhsh Eei

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 400 mm turning diameter over support: 220 mm turning length: 1100 mm centre height: 180 mm spindle passage: Ø 45 mm range of revolution per miute: 31,5 - 1.400 / 12 step U/min range of feed in x - axis: längs: 0,08 - 1,10 m/min range of feed in y - axis: quer: 0,028 - 0,40 m/min tailstock quill taper MT: MK4 tailstock quill adjustment: 200 mm total power requirement: 4,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,5 x 1,1 x 1,4 m Fgjdpfsu Ix E Hsx Ah Eei Equipment: -Three-jaw chuck Ø 250mm manufacturer Forkardt with interchangeable jaws -Multifix steel holder -Cooling water device with pump -chuck guard -chip collecting tray -chip guard Accessories: -chuck spanner -tool holder -2 pieces gears *

Condition: used, fuel type: electric, General information Year of manufacture: 2011 Weights Empty weight: 6.940 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 1.430 cm Dimensions of cargo space: 653 x 150 x 198 cm Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 691 m Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: Z40/23N RJ Year of build: 2011 Condition: Used Data: Max. working height: 14,32 m Platform height: 12,32 m Max. reach: 6,91 m Platform lifting capacity: 227 kg Platform dimensions LxW: 1,17 x 0,76 m Swivel range: 355° Max. climbing capacity: 30 % Fgjdpfxev Tii As Ah Eei Total dimensions LxWxH: 6,53 x 1,50 x 1,98 m Ground clearance: 0,24 m Drive type: Battery Own weight: 6.940 kg Special features: Swivel work basket 180°, vertical cage arm 128°, white tires. Location: 41468 Neuss: immediately available

Condition: new, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018w25-000298, overall weight: 3 kg, total length: 180 mm, volume flow: 2.5 m³/h, operating pressure: 10 bar, final pressure: 10 bar, power: 6 kW (8.16 HP), input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, Unused stock item: KSB Calio S 25-40. Highly efficient heating and drinking water pump for energy-saving use in heating and drinking water systems. Its compact design and high efficiency ensure a durable and cost-effective solution. Type: Calio S 25-40 Machine number: 29134756 Product number: 2018w25.000298 Fgedpfev Tm Hfex Ah Eei Nominal diameter: DN 25 Maximum head: 4.9 m Voltage: 230 V Efficient, variable-speed circulation pump Integrated control system for optimized performance

Condition: excellent (used), Year of construction: 2019, Motor power 1.5 kW Saw blade speed 2800 rpm Saw blade DM 250 mm Saw blade bore 30 mm Cutting length 400 mm (with 20 mm workpiece thickness) Fedpfoulzchjx Ah Eogi Cutting length at 45 degrees 230 mm Cutting depth 65 mm Swivel locking of the arm +/- 45 degrees Weight 140 kg Motor protection switch Brake motor Emergency stop switch CE including dust collection hood for extraction connection DM 120 mm Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, mileage: 32 km, power: 121 kW (164.51 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,500 kg, color: orange, gearing type: mechanical, number of seats: 2, total length: 5,767 mm, total width: 2,474 mm, total height: 2,341 mm, loading space length: 3,205 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4845.NW26.TB22025 Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Wheels: All-season tires (suitable for winter) * Seat Package 7: Driver's seat, 4-way adjustable - Single passenger seat, 4-way adjustable - Headrests, height-adjustable - Driver's seat & passenger seat, individually and variably heated - Interior armrest for driver & passenger - Lumbar support for driver & passenger - Airbag, passenger side - Seat cover: Fabric - Heated steering wheel - Leather steering wheel * Technology Package 15: Exterior mirrors, electrically adjustable, foldable and heated - Blind Spot Information System including Cross Traffic Alert - Ford Audio System - Fog lights - Pre-Collision Assist, camera and radar-based - Lane Keeping Assist with lane departure warning - Traffic Sign Recognition System, extended - Front Park Assist System - Adaptive Cruise Control - Rear view camera - Navigation system OTHER EQUIPMENT Fgsdpfoz Tawrox Ah Esi * 1 battery * Axle load increase - front to 1850 kg * Axle ratio 4.10 * Airbag, driver side * ABS with electronic brake-force distribution - ESP with traction control - Hill Start Assist - Side Wind Assist - Emergency Brake Assist - Rollover protection - Emergency brake support including hazard warning light - additional trailer stabilization only in connection with trailer coupling (surcharge applies) * Exterior mirror, short arm * Battery: Battery runtime, programming the battery runtime to 10 minutes * Floor covered with rubber up to the bulkhead * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO-Mode * Headliner in driver's cab * Roof marker lights * Vehicle modem - including live traffic information and 5G WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices) * Electric windows with quick-down/up function for driver's side * Parking brake, electronic * Ford Easy Fuel - convenient fuel filler cap and misfueling protection * Heated windshield * Glove compartment, lockable * Interior lighting with delay function with reading lamps in the front * Automatic climate control * Driver Drowsiness and Attention Alert including driver camera * Emergency Assistance * Particle filter: Diesel particulate filter * Platform: Standard platform (wide) - Front wall extension, retaining straps for tailgate * Radio: 12-inch multifunction display and Ford SYNC 4 communication and entertainment system with voice control as well as Bluetooth and USB interface - Integration of various telephony functions - Playback of music - Integration of storage media - Emergency Assistance - Ford Power-Up software updates - AppLink (wireless) - Support for Android Auto and Apple CarPlay - Capacitive touchscreen technology - 15 different languages, graphically and acoustically * Tire pressure monitoring system * Wheels: Full wheel covers * Wheels: Steel wheels 6.5 J x 16 with 235/65 R 16 tires * Windshield wipers with rain sensor * Headlights: Halogen headlights with daytime running lights * Power steering * Seat belts - Seat belt pretensioners and force limiters in the front * Recirculation/heating in the front * Immobilizer * Central locking with remote control - 2 keys, one of which with remote control * Overhead storage compartment in the front ... and more. ----First owner. German version. Errors and prior sale excepted. 2 years manufacturer's warranty from date of first registration (can be extended on request). We will gladly accept your vehicle in

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Fgsdpfx Ahe Aa Nf Re Eei Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Fgjdpo Aa Ng Iefx Ah Eoi Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2005, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 300 mm Fsdpfx Ahs Afp A Hj Eegi bore stroke 160 mm threading M 30 in ST turning speeds 70.0 - 4.000 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm T-slots 2 x 14 x 224 mm engine output 1.8 / 2.9 kW weight 450 kg Machine height 1865 mm Current new price approx. 22.000 euros Special price upon request In well-maintained condition (!!) Features: - Robust pillar drilling machine - INDUSTRIAL GRADE - * Drive: V-belt - VARIO (variable speed) - - Automatic spindle feed * With electromagnetic feed clutch * 4 feed rates: 0.1, 0.2, 0.3, 0.4 mm/rev * Feed overload protection - Infinitely variable speed adjustment * Digital speed display - Tapping (thread-cutting) function - Emergency stop button (front-mounted) - Main power switch (front-mounted) - Original operating manual Included special accessories: - Adjustable machine work light - Tapping attachment with footswitch - Automatic drilling depth control * Includes: drilling depth programming, chip-breaking function, . retract/clearance function (adjustable via digital potentiometer) . digital display (including drilling depth readout) - Fine adjustment for drilling depth and fixed stop * Setting increment: 0.1 mm - 4x anti-vibration machine mounts