Used Kallfass for sale (45)

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle Wrapping Machine Super Wrap 500 Year of manufacture: 2017 Lrodpfx Ajxl Dp Ded Nsg Dimensions: approx. 2160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical data: Film: flat film, up to approx. 120 µm Film roll width: max. top 550 mm, bottom 550 mm Working height: 815 - 915 mm Passage width: 500 mm Passage height: 400 mm Electrical connection: 400 V three-phase Rated current: 7.2 A This particularly versatile banding machine operates with 2 flat film rolls. Product feed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and thus maintenance-free. The film rolls are simply placed on the machine, film feed is motorised. Inspection and demonstrations are possible at our premises by prior arrangement. Functional guarantee, no warranty.

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Ljdpfexnzlhjx Ad Njrg Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: used, Vollautomatische Seitenschweißmaschine zur Verpackung von Produkten – unabhängig von ihrer Länge – mit Volleinschlag und ohne Folienüberlappung. Mit neuem Querstempel. Lsdpjxcufdsfx Ad Njrg Fully automatic side sealing machine for packaging products – regardless of their length – with full wrap and without film overlap. With new cross seal bar. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic flow pack machine for packaging products—regardless of their length—in a full wrap with no film overlap. Product feeding is carried out via a conveyor belt, which simultaneously folds the product into a centre-folded film using a forming shoulder. Product indexing is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted to different product widths. Longitudinal sealing is accomplished by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Technical Specifications - Cross sealing bar: 450 mm - Film: centre-folded film, approx. 12 - 80μm - Film roll outer diameter: max. 400 mm - Film roll width: max. 600 mm - Min. product length: 120 mm - Min. product width: 80 mm - Passage height: 200 mm - Working height: 780 – 930 mm - Power supply: 400 V three-phase current, 50 Hz with protective earth - Rated power: 3.5 kVA - Rated current: 5.1 A Tunnel passage width: 650 mm Tunnel passage height: 200 mm Ledpew U A Eqsfx Ad Nerg Viewing and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: used, Board packing mechanization. Lredpfx Adov Ebcxo Neg The line includes: - board hill, - roller conveyor brings boards to one end, - cross conveyor with separation function, - board packer, - liner cassettes, - board package elevator, - output conveyor chains. Material length up to 1.8 m. Manufacturer Kallfass Country of manufacture: Germany

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic side sealing machine for packaging products – regardless of their length – with full wrapping and without film overlap. The maximum output is 120 cycles/minute. Product feeding is performed via a conveyor belt while simultaneously inserting the product into a center-folded film through a forming shoulder. Lrjdpfx Adow E Igvo Njg The infeed conveyor can be easily adjusted for different product widths. The film tube containing the wrapped, aligned products is completely sealed on the side via a side sealing unit. After the product is wrapped with film, transverse sealing is carried out by a continuously heated, follow-along sealing system. The height of the forming shoulder and sealing units is manually adjustable. The remaining film scrap is taken up by a film winder. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing bar: 550 mm Film: center-folded film, approx. 12–80 µm Maximum film roll outer diameter: 400 mm Maximum film roll width: 600 mm Minimum product length: 120 mm Minimum product width: 80 mm Working height: 780–930 mm Tunnel passage width: 450 mm Tunnel passage height: 200 mm Inspection and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Year of construction: 2005, condition: good (used), As the machine has plenty of special equipment and technical features (e.g. electromechanical sealing frame closure, motor-driven film holder, goods conveyor belt with adjustable speed, and much more), it is particularly suitable for flexible service provider operations. Ljdpfjmcw T Eox Ad Njrg It is technically completely overhauled and cleaned. If you are interested, we would be pleased to arrange a viewing appointment with packing samples. The price is ex works, unpacked and plus VAT.

Condition: used, Winkelschweißmaschine /Semi-Automatic Foil sealing machine Kallfass KC 8060/650 Großformat Winkelschweißmaschine / Large Size Foil sealing machine Baujahr / Year 1985 - Serial-No. V 7.85.029 Schweißrahmenabmessungen / Sealing Frame size 600 x 800mm Schrumpftunnel Abmessungen Breite 710mm und Höhe 290mm Shrink Tunnel Dimensions Width 710mm and High 290mm Durchlasshöhe Produkte 280mm Folie, Halbschlauchfolie 12 - 80 μm Transportbandgeschwindigkeit 2,5 - 12 Meter / Minute Lrsdpjv Hp R Hofx Ad Nog Verpackungsleistung, max. 20 Takte / Minute Spannungsversorgung 208 - 480 Volt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2005, Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/450 UniversalYear 2005 - Serial-No. VD 12.05.741 Mobile on mobile frame After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Lsdpfsqxwk Tsx Ad Nerg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2000, Vollautomatische Einschweißmaschiene mit Einschweißtunnel - Automatic Foil sealing machine Kallfass Universa 400 NT - Universal 450 NYear 2000 - Serial-No. S 04.00.9 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Lsdpfxjr H N U Hs Ad Nerg On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1989, Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/400Year 1983 - Serial-No. V 6.83.1891 Mobile on mobile frame After sealing - automatic transport into tunnel Ljdpfxeinla To Ad Njrg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Shrink Tunnel Compact 650 D Year of construction: 2008 Dimensions: approx. 2600 x 1500 x 1400 mm (LxWxH) Weight: approx. 750 kg net / 830 kg gross Technical specifications: Lrsdpfjwmcuwox Ad Njg Tunnel passage width: 650 mm Tunnel passage height: 200 mm Length of heated tunnel hood: 1800 mm Working height: 800 - 900 mm Power supply: 400 V three-phase current Energy consumption: approx. 6 kWh Rated current at 400 V: 21.0 A in single-unit operation Compact and economical shrink tunnel with the patented ring nozzle heating system and particularly effective air flow regulation. Equipped with a continuously adjustable plastic link belt. This tunnel is particularly suitable for shrinking small to medium-sized products. Viewings and demonstrations are available at our premises by appointment. Functional guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Fully automatic flow wrapping machine for packaging products—regardless of their length—in a complete wrap without film overlap. Product infeed is carried out via a conveyor belt, while simultaneously being wrapped in centerfold film using a forming shoulder. Product timing is achieved via a photoelectric sensor. The infeed conveyor can be easily adjusted to accommodate different product widths. Longitudinal sealing is produced by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing and defective parts have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Technical data: - Cross sealing bar: 450 mm - Film: centerfold film, approx. 12–80 µm - Max. film roll outer diameter: 400 mm - Max. film roll width: 600 mm - Min. product length: 120 mm - Min. product width: 80 mm - Pass-through height: 200 mm Lrsdpfx Asw Ddb Tjd Njg - Working height: 780–930 mm - Power supply: 400 Volt three-phase, 50 Hz, with protective earth - Rated power: 3.5 kVA - Rated current: 5.1 A Inspection and demonstration can be arranged by appointment at our premises. Function guarantee, no warranty.

Condition: excellent (used), Dimensions of the entrance opening 400x200 Dimensions Length 2995 mm Lredpfotrtztox Ad Njg Width 1250 mm Height 1550 mm

Condition: excellent (used), Year of construction: 1991, Manufacturer: Kalfass Pgsb Aeq Htfnsz Hpn Esr Model Number: Universa8060 Rate 40units/min Productdimensions 750x 500 x 140mm Maximum width 800mm Dimensions Welder2200 x 1400 x 1800 mm - Oven 1750 x 1350 x 1300mm -Mat 1700 x 600 x 1100 mm (band width 400mm) Compact L-sealer with shrink oven Ledeq Htfnjpfx Ad Nsrg Created for the demand of industrialapplications The Kallfass 8060/650 compact L-sealers in combination with high-performance shrinktunnels. The qualities of this series of machines becomeevident when Subjected to hard, continuous use.

Condition: refurbished (used), Year of construction: 2007, Kallfass Universa 400 with Compact 650 SO shrink tunnel and 1000mm pre-strip Kallfass Universa 400, built in 2007 The system is available immediately. The price of the complete system includes the Universa 400. The machine is being technically overhauled and is in very good condition. Technical specifications: - Length of cross-sealing die: 450 mm - Sealing die passage: max. 200 mm - Min. product length: 80 mm - Film support plate optional - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing die with replaceable sealing bar - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2007 - Kallfass Compact 650SO shrink tunnel - 1000 mm long pre-belt The cross-sealing and side sealing systems are currently being inspected and overhauled. Infeed and discharge belts, and conveyor belts will be checked and replaced if necessary. The machine will be available after inspection and repair at the end of April. Installation of the system is included in Germany, Austria, Western Europe, parts of Eastern Europe, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in full wrap and without film overlap. Product feeding is via a conveyor belt, with simultaneous wrapping in a semi-tubular film via a forming shoulder. Product timing is achieved via a light barrier. The feed belt is easily adjustable to accommodate different product widths. After the product is wrapped in film, it is transversely sealed using a continuously heated sealing system. Longitudinal sealing is achieved using a continuous side sealing device. The height of the forming shoulder and sealing devices is manually adjustable. Ljdoiqtuwjpfx Ad Norg The remaining film strip is taken up on a film rewinder. If required, we also offer installation and service on this or systems from other manufacturers. Subject to prior sale. Prices are EXW. No guarantee is given for technical data.

Condition: ready for operation (used), Year of construction: 1991, A Kallfass Pack-Jet 2000 film packaging machine with a Kallfass Universal 450N shrink tunnel is available. Max. film roll width: 760 mm, rated power: 9 kW, operating voltage: 380 V, control voltage: 24 V, main fuse: 3x 20 A, rated current: 18 A. With Kallfass Universal 450N shrink tunnel, rated power: 16.5 +1 kW. System length: approx. 9000 mm, width: 1400 mm. The transformer for the sealing stamp is defective. On-site inspection is possible. Lrsdpfjw Nykmex Ad Njg

Condition: used, Year of construction: 2004, A film sealing machine is for sale. Type: KW 8060 Universal Ljdev Hx Nxjpfx Ad Njrg Year of manufacture: 2004 Machine number: RZ 05.04.105

Condition: refurbished (used), Year of construction: 2007, Kallfass Universa 400 with Compact 650 SO shrink tunnel and 1000mm pre-belt Kallfass Universa 400, built in 2007 Ljdpfxoh N Dwfs Ad Norg The system is available immediately. The price of the complete system includes the Universa 400. The machine is being technically overhauled and is in very good condition. Technical Specifications: - Length of cross-sealing die: 450 mm - Sealing die passage: max. 200 mm - Min. product length: 80 mm - Automatic length compensation to reduce the die gap - Film support plate available as an option - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing die with replaceable sealing bar - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2007 - Kallfass Compact 650 SO shrink tunnel - 1000 mm long pre-belt The cross-sealing and side sealing systems are currently being inspected and overhauled. Infeed and discharge belts, and conveyor belts will be checked and replaced if necessary. The machine will be available after inspection and repair at the end of April. Installation of the system is included in Germany, Austria, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in full wrap and without film overlap. Product feeding is via a conveyor belt, with simultaneous wrapping in a semi-tubular film via a forming shoulder. Product timing is controlled by a light barrier. The feed belt is easily adjustable to accommodate different product widths. After the product is wrapped in film, it is transversely sealed using a continuously heated sealing system. Longitudinal sealing is achieved using a continuous side sealing device. The height of the forming shoulder and sealing devices is manually adjustable. The remaining film strip is taken up on a film rewinder. If required, we also offer installation and service on this machine or systems from other manufacturers. We reserve the right to sell the product at any time. Price is EXW. No guarantee is given for technical data.

Condition: excellent (used), functionality: fully functional, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hard and soft wood Condition: Technically in excellent condition Included in the price: All machinery, auxiliary equipment, spare parts, and saw blades 🔧 Main lines of the plant 1. External loading and first cut • 25 m chain infeed conveyor for logs • Holtec ES 120 cross-cut saw (Year of manufacture: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw chain type: Chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk material • 5 m long discharge roller conveyor Lredpfxewh U Dmo Ad Neg 2. Internal wood processing • E. Gillette Europe automatic log infeed  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller diameter: 1600 mm  - Capacity: Logs up to 1200 mm in diameter  - Belt width: 100–160 mm  - Automatic infeed/outfeed with conveyor belt • Elmed ARGUS 3 metal detector  - Tunnel design with divisible opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edge milling machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / Width: 600 mm  - Automatic infeed and roller discharge 3. Shredding and removal • Vecoplan VTH 65/25/5/U Industrial Shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 Vibrating Table  - Surface: 650 × 2500 mm  - For even feeding to the shredder • Vecoplan KKF 500-1K-U Scraper Conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, and pellets 4. Automatic Cutting and Sorting • Kallfass RA4000R Automatic Cutting System (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC Multi-Blade Saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with spacers  - Max. log length: 2.5 m 5. Additional machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw grinder  - Saw blade diameter: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinder  - Grinding length: 400 mm / Width: 140 mm • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air flow: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction system • APW fan – 18.5 kW, built in 1998 (2 fans) • Lysair fans – built in 1995 and 2020 • 2 cyclones with rotary valves • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be viewed in Belgium by appointment. All equipment is ready for operation and ready for immediate use. Ideal for industrial wood processing or as a complete investment. _____

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact Shrink Wrapper KC 5040/450 Universal Year of Manufacture: 2015 Technical Data: Sealing frame dimensions: 500 x 400 mm Film roll width: max. 550 mm Lrodox U Dcrepfx Ad Nsg Working height: 870 – 970 mm Power supply: 380 V three-phase User-friendly L-sealer, combined with shrink tunnel. Especially robust design for industrial use. Sealing frame dimensions: 500 x 400 mm. Proven impulse sealing technology with PTFE-coated sealing wire for completely odor-free operation. Equipped with a locking mechanism featuring automatic pressure to ensure precise adherence to the set sealing time and trouble-free sealing, even with thick films. Inspection and demonstrations can be arranged at our premises by appointment. Function guarantee, no warranty.

Condition: excellent (used), Year of construction: 2020, Complete sawmill for pallet lumber consisting of: 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory log input measurement system by Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter from 20 - 90 cm. 2. Sawmill: Möhringer band saw, running bandsaw with Flexi Drive carriage. Slab scanning unit. Round timber intake with step-by-step singulation. Laser measurement by Bidac. Kallfass cross-cut unit. Resaw: EWD Optimes with chipper canter and double arbor saw NKU. Brodbaek edger system. Stacking system for main products, empty pallet handling for both main and side products. Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electric and electronic control cabinets, etc. Waste disposal. Detailed plans or video can be provided upon request. Lredpfx Adsx T Azws Neg

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm Lsdpfou Nu Hiex Ad Nsrg -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: good (used), - Bundle packer for shrink films - Dimensions 1780 x 1480 x 2105 mm (L x W x H) Ledjr Ndi Iopfx Ad Nerg - Working width 500 mm, good condition ready for use - Wide range of use, comes from current production - Connected loads 380V, 10A, 50Hz, 5kW - Price 1.500,00 €

Condition: used, Year of construction: 2000, The Kallfass KD 5040/450 Standard, manufactured in 2000 with serial number VD 02.00.393, is a shrink-wrapping machine designed for reliable and efficient packaging. With a tunnel passage width of 450 mm and an adjustable passage height ranging from 100 to 400 mm, it offers flexibility for a wide variety of products. The heated tunnel hood measures 900 mm in length, ensuring consistent shrink performance across different formats. This unit features a variable transport speed of 2.5 to 12 m/min and precise temperature control via an electronic thermostat with a switching accuracy of plusminus0.2 ??C, guaranteeing stable and repeatable results. Currently located in a printshop in Germany, the machine is in good condition without any damage, reflecting its durability and careful maintenance. Robust and dependable, the Kallfass KD 5040/450 Standard is a practical solution for consistent shrink-wrapping performance in professional production environments. Format: 450 mm Lrsdpfx Adexa Ebdo Neg Equipment: Good condition without any damage Tunnel passage width/tunnel passage height, adjustable: 450 mm/100 - 400 mm Length of the heated tunnel hood: 900 mm 900 mm Transport speed, variable: 2.5 - 12 m/min Temperature control via electronic thermostat: switching accuracy plusminus 0.2?? C