Used Kaban Cd 3050 for sale (7,128)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total height: 2,020 mm, total width: 960 mm, total length: 1,350 mm, pressing force: 50 t, table width: 450 mm, table length: 450 mm, operating speed: 30 mm/s, reverse speed: 42 mm/s, pressing speed: 6 mm/s, This press has been specially designed for bending, embossing, forming, punching, assembly, and deep drawing operations. Force options are available in variants from 50 to 150 tons. Model: CD-50/NC Force: 50 T Motor power: 4 kW Tjdjwlgcispfx Af Tof Ram stroke: 250 mm Working speed: 6.3 mm/sec Approach speed: 30 mm/sec Return speed: 42 mm/sec Maximum pressure: 320 Piston stroke: 250 Lower table: 450×450 mm Ram with anti-rotation device Open height: 400 mm Weight: 1,480 kg CYLINDER AND HYDRAULICS: The double-acting cylinder is equipped with a guide bush, a hard-chromed piston rod, and wear-free guide elements. To prevent wear on the piston rod, the presses are fitted with a removable and replaceable pressure plate. Tools can be mounted in place of the pressure plate. An anti-rotation device is fitted to the cylinder by means of a clamp and guide rod. The hydraulic unit features two speeds and is equipped with automatic high-speed shutoff. A decompression valve for the cylinder is also included in the delivery. ELECTRICS AND SAFETY: A SIEMENS SIMATIC S7 1200 safety PLC and an MTP-400 4-inch touchscreen (positioned above the electric foot pedal) are integrated as standard. These allow programming of the operation mode (semi-automatic or automatic), force, stroke, and dwell time of the upper cylinder. The system offers storage for up to 99 programs, with each allowing configuration of all previous parameters. The control cabinet includes a switch for selecting the desired operation mode (manual or automatic) and a key switch for maintenance work. The electrical and hydraulic controls are designed to be redundant and self-monitoring. The hydraulic safety block is equipped with electrically monitored valves for the required safety. Operation is via a Category IV safety two-hand control button. For maximum safety, fixed side guards with a front opening of 650 mm are installed. A hydraulic cushion or hydraulic ejector can be optionally installed. The machines are supplied complete with operating instructions. The presses in the CD series meet all essential safety requirements and criteria in accordance with CE regulations.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2606, type of input current: AC, total length: 9,000 mm, total height: 2,350 mm, overall weight: 2,500 kg, Form 1 Todpfxoxcx Hxj Af Tsf 2-piece tray: 8.5(12) x 28(32) cm Form 2 3-piece tray: 4.5(11) x 18.8(25) cm Form 3 2-piece tray: 11(17) x 18(24) cm, included with the machine with some package material too.

Condition: good (used), Rewinder to the digital printer. Complete - full working. I have 2 units for sale. Tsdpfx Afevvnwqj Tjf

Condition: used, Deburring/polishing tumbler TROWAL CD 110 Tsdpfx Aoxbt Dijf Tef

Year of construction: 2003, condition: ready for operation (used), Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible. Tsdpfx Aexaph Usf Tof

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Year of manufacture 1993 Todpoguvtdofx Af Tef Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 6851350, Resolution (Z) 0.38 µm (175 mm) / 0.19 µm (350 mm); system: 0.04 µm Contact speed (Z) 0.1 – 1 mm/s Positioning (X/Z) X: 0.2 – 8 mm/s; Z: 0.2 – 10 mm/s Measurement speed 0.2 – 4 mm/s Measuring length (X) 0.2 – 120 mm Measuring range (Z) 50 mm Arms 175 mm, 350 mm Guideway deviation < 1 µm / 120 mm Stylus radius 25 µm Measuring force 1 – 120 mN Additional features Automation, protective elements, advanced calibrations, user safety Tsdpow S Egxefx Af Tof

Condition: used, empty load weight: 4,160 kg, maximum load weight: 34,840 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2008, suspension: air, tire size: 385/65R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Location: Bovenden, 3 axles, BPW axles, air suspension, ABS (anti-lock braking system), underrun protection, front support legs, side aluminium side protection, landing gears. Todpfowtzrzsx Af Tjf Superstructure: 3-axle container chassis for ISO and tank containers 20ft/30ft with ADR, 3x 9t BPW axles, drum brakes! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: good (used), functionality: fully functional, Year of construction: 1983, We are selling a used guillotine shear from the manufacturer Digep DLB 4 3050. The machine is fully operational, connected to power, and fitted with sharp blades. Todpsw Rdzlsfx Af Tof Technical specifications: - Sheet thickness: 4 mm - Sheet width: 3050 mm - Machine dimensions: 3.7 x 2.1 x 1.4 m - Machine weight: approx. 4.65 t The price is ex works loaded at the location in Werdau.

Condition: repair required (used), Year of construction: 2004, The device has had little use. The envelope inserter is 100% operational. The Mueller input module – reading station – is damaged. It's possible to sell only the envelope inserter without the channel at a lower price. Tedpon Slkiofx Af Tjf

Year of construction: 2008, condition: ready for operation (used), Stroke: 100mm, max. electrode distance: 230mm, electrode distance: 20kN, controls: Siemens S7-1500, with documentation, was hardly used. Tedpfx Afolp N Eye Tof

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Masch. No. 352 / 92 Year of construction 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds Tedpfx Aoguvtasf Tsf - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: good (used), Simatic panel, operator panel, machine control, interface panel, operating unit, control panel, keyboard, control panel teach pendant -Manufacturer: Xycom, Operator Panel from OMSO CD Printing Machine -Type: 2005 -Dimensions: 420/280/H315 mm -Weight: 6.9 kg Tedpfx Aswz H E Nsf Tjf

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Webomatic Model: CD-60-D Year of manufacture: 2015 Pump: 100 m3 Chamber size: 80 x 50 cm, 2 sealing bars Function: Gas flushing available Tsdpfx Afsw Ngxds Tof Shipping possible upon agreement

Condition: excellent (used), Year of construction: 1995, operating hours: 1,234 h, functionality: fully functional, 1 GUBISCH - window production line type CENTROMAT-CD-SUPER (output 3 - 4 parts per minute. Number of units to be produced in 8 hours, approx: 200 pieces) with the following machine components: 2 cross-cut saws Tsdpfx Aev A It Sjf Tef > 2 cross-cut saws electronically controlled: yes > Number of tools: 1 piece > Spindle speed: 3000 rpm > Tool diameter max.: 350 mm > Motor power: 3 kW 2 left and 2 right vertical slot spindles > Number of tools: 3 pieces > Spindle stroke: 3x100 mm > Spindle speed: 4200 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 3 profiling spindles vertical right > Number of tools: 3 pieces > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW 3 Profiling spindle vertical left > Number of tools: 3 pcs. > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW Other features: > Online capable: yes > Double parts package: yes > Screen control: yes Detailed description on request.

Condition: good (used), Year of construction: 2008, operating hours: 7,840 h, functionality: fully functional, machine/vehicle number: 3212.08, turning diameter over cross slide: 260 mm, spindle bore: 106 mm, turning length: 2,000 mm, turning diameter: 475 mm, center width: 2,000 mm, turning diameter over bed slide: 475 mm, CNC LATHE – Cycle Lathe CD480 Manufacturer: DMT Kern Model: CD480 x 2000 Control: HEIDENHAIN "MANUALplus 620" Year of manufacture: 2008 Condition: Good / Very good Operating hours: 7,840h Scope of delivery: - Original documentation - Tailstock Todpfx Afow Exlvo Tjf - Automatic twelve-position turret with driven tools Tool mounting DIN 69880, Q5 30mm, mounted on the rear cross-slide - Additionally, Multifix B at the front - Main spindle with DIN 55026/A8 mount, bore 106mm, spindle bearing diameter at the front 140mm - Special speed range, max. 2,500 rpm - Fixed steady rest with roller jaws - … and many other factory-fitted special features (see description) - Tool holders, various lathe chucks, mounts for the tool turret, driven tools etc. can be purchased as an extra package and are not included in the main machine delivery!

Condition: ready for operation (used), Year of construction: 2002, Speed: 4500rpm, max. bowl diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62293h. Including spare parts. On-site inspection is possible. Tjdpfx Afju Av H Ds Tsf

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, table length: 3,050 mm, table width: 1,550 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, safety light barrier, skyCUBE XLs class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XLs class, produced by PFEIFER technology in Saxony, Germany, is engineered for your professional cutting tasks. It combines advanced productivity with economic efficiency and precision. The machine housing is manufactured from welded and bolted steel construction, specifically designed for industrial and commercial applications. The drive system developed by PFEIFER technology ensures both precision and high repeat accuracy. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, providing you with maximum safety. The ergonomic design with a pull-out worktable facilitates easy loading of the machine. Drawers in the lower section collect cutting residues efficiently. Tedpfx Asw Ebzmof Tsf The skyCUBE laser software with file import capability generates precise laser cutting geometries for your requirements. Optimize your cutting quality and speed—even with thick materials—thanks to the 6kW laser power, including when using compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Monitor your production with ease: the large front doors allow convenient access to the entire working area. Position the operator console wherever you prefer. It is mobile, providing optimal visibility of the cutting process at all times. Naturally, your safety is the highest priority when operating the skyCUBE laser! The skyCUBE XLs is a Class 1 laser system. There is no risk of coming into contact with laser beam emissions or reflections during operation. With all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Special safety glass panels and a perfectly shielded cutting area reliably protect you from laser radiation risks, while an independent safety system enables loading without interrupting production. Select the laser power that best suits your requirements; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a factory-new laser machine from our own production) Maximum dimensions (L × W × H): 2310 × 8505 × 2505 mm / Laser machine: 4.0 T Power supply: depends on laser source (6kW), 400V/50Hz, 3-phase / 27kW Process gas control for: oxygen / nitrogen / compressed air according to material and process

Condition: new, Dough mixer Tsdpfx Afsuu Evwj Tof Container volume: 80 liters Dough mixers are intended for professional use in the bakery and catering industry They are used to prepare primarily dough, but they can also be used to prepare other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger amounts of dough continuously They consist of a container for ingredients and a mixing tool (spiral) Features: Flour capacity: 30 kg Test capacity: 50 kg Container capacity: 80 liters Mixing speed: 125/250 rpm Bowl speed: 12.5/25 rpm Voltage: 380V 50Hz Electricity: 3.5kW Machine size: 950x590x1100 mm Weight: 290 kg

Condition: good (used), Year of construction: 2004, Swing over bed Ø 320 mm Swing over cross slide Ø 150 mm DBC Turning Length 750 mm Spindle bore 52 mm Spindle power 16 kW Tailstock spindle Ø 60 Ø Tedswu Dq Aepfx Af Tef Stroke pinole 140 mm Spindle taper 4 Mk Speeds / ranges 3000 Rpm Feed rate X-Axis 1000 mm/min. Feed rate Z-Axis 2000 mm/min.

Year of construction: 2017, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 12345, Plastic production has stopped, so I am selling off all machines and accessories in good condition. Demag Intelect. 2005 Tedpow Dqk Uofx Af Tsf Demag Systec 170-520. 2008 Demag Systec 500-270. 2000 Demag Ergotec 35-320-80.2000 Arburg Allrounder 420c 1000-295. 2006 Arburg Allrounder 270C 400-100. 1999 Arburg 470E 1000-290. 2017

Condition: good (used), Extremely high spec machine. 622mm wide. 13.2m long. Currently set up for 2 x 2 x 230mm x 175mm packs. Was previously packing gammon steaks. Todswlflcepfx Af Tof

Condition: used, fuel type: diesel, lifting height: 29,500 mm, axle configuration: 4x4, Year of construction: 2013, Equipment: all wheel drive, Technical information Chassis type: rigid Drive: Wheel Top speed: 20 km/h Empty weight: 23.000 kg Functional Lifting capacity: 4.999 kg CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 8,08x2,55x3,15 Production country: FR Additional information Please contact Christian Theißen for more information Tjdpjv Ti Hnsfx Af Tjf Manufacturer Manitou Type MRT3050 Build in 2013 Features Max. Lifting height 29,45 m Max. Lifting capacity 4.999 kg Max. lateral reach 18,45 m Length forks 1,20 m Engine Diesel Dimensions (without forks) LxB 8,08 x 2,55 m Building height 3,15 m Swivel range 360° Weight 23.000 kg Specifics wheel Connection for auxiliary devices support

Condition: good (used), Year of construction: 2009, 1 used CNC lathe Brand DMT/Kern Type CD 480 x 3000 Year of manufacture 2009 Control Manual Plus 620 Todpfxsu A Ducj Af Tsf Technical specifications: Center height 230 mm Turning diameter over bed 475 mm Center distance 3000 mm Cross travel 255 mm Spindle head DIN 55026/6 Spindle bore 82 mm Power consumption 30 kW Tool holder turret VDI 40 Equipped with Turret Hinged belt conveyor Complete documentation available! Machine is ready for use and can be tested on-site!

Condition: ready for operation (used), Control Techniques CD II 75 frequency inverter , serial no. according to photo ,used, normal traces of use, 100% functional, scope of delivery according to photos Todpfxji D Umzj Af Tef