Used International 510 for sale (12,541)

Condition: excellent (used), IM Very good condition. Hfjdsw Ebwujpfx Afion

Condition: excellent (used), functionality: fully functional, operation weight: 4,700 kg, Year of construction: 2018, Description Hoeflon C10 compact crane This compact crane is ideal for work in hard-to-reach places. The Hoeflon C10 is renowned for its maneuverability and power. Contact us for more information and a viewing. Technical specifications: Hour meter readings: - contact: 616 - diesel engine: 150 - electric motor: 102 Hfsdpfxoxnxq Ij Afisn Year of manufacture: 2018 Color: Hoeflon original The crane will be delivered with maintenance service and inspection by Hoeflon Nederland.

Year of construction: 2018, condition: ready for operation (used), Various machines for sole assembly, heating, activation, pressing, and cooling of soles for the shoe manufacturing industry are available. 1) Cooling tunnel Elettrotecnica 491 PS, year of manufacture: 2017, temperature range: 0°C-10°C, belt width: 400mm, machine dimensions X/Y/Z: approx. 1150mm/800mm/1600mm, weight: approx. 250kg. 2) 3x sole activation units Elettrotecnica 0133 OP, year of manufacture: 2004, activation temperature range: 50°C-120°C, working area X/Y: 300mm/400mm, machine dimensions X/Y/Z: approx. 600mm/700mm/1300mm, weight: approx. 150kg. 3) 3x sole presses Elettrotecnica 160, years of manufacture: 2013/2014, pressing force: approx. 800kg, pressing time: 30s, machine dimensions X/Y/Z: approx. 1000mm/800mm/1500mm, weight: approx. 320kg. 4) Heat-Setter Mollina & Bianci CS 90 TS, year of manufacture: 2013, temperature range: 50°C-150°C, max. belt speed: 5m/s, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 350kg. 5) Cooling tunnel Elettrotecnica 488 PS, year of manufacture: 2014, min. temperature: 5°C, machine dimensions X/Y/Z: approx. 1100mm/800mm/1600mm, weight: approx. 250kg. 6) Heat-Setter International 5840, year of manufacture: 2015, temperature range: 60°C-180°C, machine dimensions X/Y/Z: approx. 1350mm/950mm/1550mm, weight: approx. 350kg. An on-site inspection is possible. Hodpfsxnp Rxjx Afiefn

Condition: excellent (used), load capacity: 6,000 kg, table load: 6,000 kg, Welding turntable with 6 ton load capacity Hfedpfjwz Rfyox Afijn Speed steplessly adjustable from approx. 0.01 to 1.1 rpm Diameter 2.15 m New electrics With hand and foot remote control

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut Hfjdpfxswrn Iyo Afijn For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: ready for operation (used), Apple International mobile depositor, model: WD, serial number: 1601710, year of construction: 2016, 240 Vac, 1 Ph, 16 A, 8 heads, inside dimensions: Ø 500 mm x 405 mm, total dimensions: 1900 mm x 850 mm x 1550 mm. Hfjdpfx Afeu D Hxaeien

Condition: excellent (used), REF: MM6222 1 X  J&E Hall Fusion 40ft Chiller/Freezer Container. The J&E Hall Fusion 40ft Container is a high-specification, industrial-grade refrigerated unit designed for flexible, large-volume cold storage and transportation. As a versatile solution, it operates as both a chiller and a freezer, offering exceptional reliability, precise temperature control, and superior energy efficiency. This 40ft unit is built into a standard ISO shipping container frame, making it robust, stackable, and easily transportable globally. It is an ideal asset for logistics, food processing, pharmaceuticals, and any business requiring high-capacity, critical temperature management. Key Features and Benefits Hfodpfx Afsxiw A Seien Dual Functionality: Operates efficiently as both a chiller (for fresh produce, dairy, etc.) and a deep freezer (for frozen goods) -25 degrees, offering maximum versatility. Fusion Technology: The cooling system is engineered for reliable, uniform air distribution and temperature stability, which is crucial for maintaining product integrity across the entire 40ft length. Robust Construction: Built on an ISO standard frame, ensuring structural integrity and suitability for harsh outdoor conditions and intermodal transport (sea, rail, road). High Capacity: The 40-foot length provides significant volume, making it perfect for bulk storage or large-scale temporary temperature control requirements. Hygienic Interior: Features smooth, non-corrosive internal finishes that facilitate easy cleaning and compliance with food safety standards.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: G-233F | G-203, Used Triotech G-203 Bubble Tester/Leak Detector Set/System Manufacturer: Trio-Tech International G203 Model: Trio-Tech G-233F Filtration system, Trio-Tech G-203 System with several tools, filtration system, stainless steel control unit, several baskets, air pump. Power: 220 volt. Hjdpjxiwb Usfx Afiefn Table not included

Year of construction: 2010, condition: excellent (used), Spotting ruler in transport box Hfodpfxofdzwce Afijn length 510 mm width 110 mm

Condition: excellent (used), CATALOGUE NUMBER 7571 Technical data: - shaft width 510mm - top length 3040mm - noise reduction comb - shaft cover - cast iron tops - both tops adjustable - original cast iron guide adjustable at an angle - 3kW engine - diameter of the exhaust port 130mm - dimensions length/width/height 3040x850x1000mm - weight 1032kg ADVANTAGES - German production - possibility of installing profile knives - long tops - used planer - very good condition Hfjdpfsv H Dugsx Afion Net price: PLN 8900 Net price: EUR 2090 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: Hjdou Ti Tvepfx Afisfn MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: used, Year of construction: 2021, operating hours: 380 h, functionality: fully functional, Available immediately ! Top offer ! Used machine from one of the world's largest manufacturers Dardi International / Flying Bridge version, 3x2 m cutting area, 2-D, linear guides with ball screws in all 3 axes, Yaskawa motors with controllers, ready for demonstration in our showroom with the following equipment: Machine: - 3x2m cutting area with stainless steel basin and undulating steel supports, individually replaceable completely new - ESA PC control WIN 10 - 1 cutting head 2-D version -hand wheel High-pressure feed via swivel joint - Central lubrication - High-pressure feed via stand profile and stopcock - Allfi® abrasive conveying system 1.3 To fully automatic - Allfi® Abrasive dosing system 2.0 without pneumatics and infinitely adjustable - KEYENCE light barriers for CE design High-pressure pumps available immediately on request at an extra charge: High-pressure pump Flow available immediately for an additional charge : Used Flow 7 XS 55, 3.8l/min, 37KW Only original 11500 operating hours Water-cooled design via integrated heat exchanger Hsdon I Uqnspfx Afisfn Software - IGEMS 2-D CAD/CAM programming system incl. automatic nesting to avoid material waste - IGEMS, pump and operator training as well as installation on site at an extra charge Price ex works Elsenfeld Delivery time for new orders approx. 12 weeks from order placement - 6-month warranty Other sizes available at short notice on request We are a European dealer for Dardi International with 26 years of experience in the field of high-pressure water jetting systems

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. Hsdpfehg Rcxjx Afisfn The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: used, Year of construction: 2012, High-speed polyethylene extrusion line, used for single-side polyethylene coating on paper cups and other paper containers. This is an industrial extrusion coating line designed for laminating polyethylene onto paper substrates. The machine produces PE-laminated paper, commonly used in the manufacturing of food packaging (paper cups, trays, boxes, etc.). It is a specialized piece of equipment for the paper packaging industry, providing barrier properties against liquids and grease. Main technical specifications Melt slot length: 1200 mm Finished product width: 500–1150 mm Operating speed: 100–150 m/min Hfsdjxdimfjpfx Afijn Extruded film thickness: 0.01–0.08 mm Maximum roll diameter: 1200 mm Maximum extrusion capacity: 120 kg/h Installed power: 97 kW Dimensions: 7500 × 7800 × 3200 mm Weight: 14 tons

Condition: excellent (used), Faceplate diameter 510 mm Hfedpfx Asfm Tquefien KKG 8 Weight 111 kg

Condition: used, Year of construction: 2024, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value Hfsdpeif Ek Rsfx Afion • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), Year of construction: 2008, DMG CTX 510 Sinumerik 840D Machine in perfect condition, equipped with bar feeder and C axis Spindle operating hours: 6720 Spindle bore: 95 mm Collet chuck Forkardt D=100 mm max; I also have a brand new Hainbuch SK100 collet chuck for this machine Tool holder VDI 40 Hfjdpfx Afor Ak S Noisn

Condition: good (used), Used Thetford International T3 waste compactor. Hfjdpehvi Ahofx Afien

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 70 kW (95.17 HP), type of input current: three-phase, overall weight: 750 kg, total length: 2,200 mm, total height: 2,300 mm, power: 70 kW (95.17 HP), Air-cooled Hitema chiller – 70 kW cooling capacity Hedpfx Afow Ufnhsiefn Also available for rental R410A

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Hedpfewty Etex Afijfn

Condition: excellent (used), Faceplate diameter 510 mm Height 100 mm Diameter centering flange 90 mm thread pitch 5,2 mm Weight 68 kg Hjdpfxsfm Tp Se Afijfn

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. Hfjdpfxofnlkwo Afien • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The angle conveyor from MASS is for sale: Type NC - SPEC 500/1800 x 600 Infeed section: 500 mm Incline section: 1800 mm Usable width: 600 mm, total width: 750 mm Hfsdpow Nrpbofx Afijn Conveyor speed (constant): 6 m/min Mobile base frame with brake rollers Discharge height: max. 1500 mm, min. 1100 mm Side guide: 60 mm PU belt with 30 mm cleat height, temperature resistant from -10°C to +90°C Motor protection switch with 5 m cable & CEE plug

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface Hsdpfx Afswgc I Reiefn • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut Hfjdpfx Ajfhgvwofijn For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.