Used Kaban Cd 3050 for sale (5,427)

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW Bcjdpjr U Skhjfx Aafsu spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 power chuck, tailstock, chipconveyor *

Condition: repair required (used), Year of construction: 2004, The device has had little use. The envelope inserter is 100% operational. The Mueller input module – reading station – is damaged. It's possible to sell only the envelope inserter without the channel at a lower price. Bjdpfxjn Slkij Aafecu

Condition: used, Year of construction: 1981, total height: 2,850 mm, total width: 1,800 mm, total length: 1,100 mm, Empty weight: 6.000 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 10340 - Control: Conventional - Table width: 550mm - Table length: 630mm - Ram width: 500mm - Ram length: 1100mm - Model: Hydraulic - Max. stroke: 160mm - Power: 100.0ton - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bcedexywkqepfx Aafou Lukas van Rossum

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment Bedpfoxacfgox Aafscu * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: used, Year of construction: 2010, Working container / Gross volume 350 Liter useful volume 176 Liter workpiece sizes max. 220 mm turning speeds 1000 / 1500 U/min total power requirement 2.6 KW weight of the machine ca. 633 kg original price in 2010 approx. 35.000 euros Special price on request Description: - WALTHER TROWAL rotary vibrator with flat container base Bcedpfsxz Hh Isx Aafsu - Suitable for polishing, smoothing, or deburring components - For bulky, large-volume, but also sensitive workpieces - Wear protection lining made of molded hot PUR - Flexible control and dosing technology - Pneumatic separator flap actuation - Extra-long screening zone - Original operating instructions Equipment: - WALTHER separate control unit - WALTHER sound insulation cover with bracket - WALTHER ZM 03 ECO process water purification system * Purification of process water from oils and dissolved metals * Using centrifugal force * Water savings of up to approx. 98% * Compound savings of up to approx. 90%

Year of construction: 1989, condition: used, Stop for press brake, edging bench, guillotine shears ... -Spare part: stop bar comes from a Dorstener BBM press brake type: APE80-3050 -Servo motor: manufacturer Stromag -Servo motor: Type: FGP311/005-40AA -Stop ruler: 2630 mm Bcjdpfxegrzu Uo Aafju -Length unit approx.: 800 mm -Dimensions 2630/800/H340 mm -Weight 480 kg

Condition: good (used), Simatic panel, operator panel, machine control, interface panel, operating unit, control panel, keyboard, control panel teach pendant -Manufacturer: Xycom, Operator Panel from OMSO CD Printing Machine -Type: 2005 -Dimensions: 420/280/H315 mm Bodowz H E Nopfx Aafjcu -Weight: 6.9 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Rexroth, double-acting hydraulic cylinder stroke 175 mm -Type: CD/T3/MP5/25/18/175/F/ .: 7472433440 Bjdpfov I Tanex Aafjcu -Piston rod: Ø 18 mm -Holes: Ø 20/12 mm / Distance: retracted 365 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 415/40/H60 mm -Weight: 2.3 kg/piece

Year of construction: 2004, condition: ready for operation (used), A horizontal bed cycle lathe DMT with extensive accessories is available. Turning diameter over bed/cross slide: 650mm/400mm, max. turning length: 1500mm, travel X/Z: 440mm/1500mm, speed: 2000rpm, spindle bore: 106mm, spindle bearing diameter: 150mm, rapid traverse X/Z: 5m/10m/min, tailstock quill diameter: 100mm, tailstock quill stroke: 200mm, tailstock taper: MT5. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2300mm, weight: approx. 5000kg. Documentation available. On-site inspection is possible. Bedpfx Aaox Uq Ubjfscu

Condition: used, Lippert rising falling Incline belt conveyor GF 3050+800-750-600 RA2258 Technical data: Conveyor length (NL): 3850 mm ( 3050 mm + 800 mm ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DR63LA/TH/Z Electrical data: 50Hz V380-500, kW 0,25 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Bcjdpfx Aaorrxc Sofou Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2007, scrubber-dryer, floor cleaning machine, mop Bcodjb A Hg Eopfx Aafeu -Scrubber-dryer with drive -Working width: 850 mm -Practical area coverage: 2860 m²/h -Charger -with drive -Special suction foot guarantees maximum suction power at low cost.

Condition: good (used), Year of construction: 2009, 1 used CNC lathe Brand DMT/Kern Type CD 480 x 3000 Year of manufacture 2009 Control Manual Plus 620 Technical specifications: Center height 230 mm Turning diameter over bed 475 mm Center distance 3000 mm Cross travel 255 mm Spindle head DIN 55026/6 Spindle bore 82 mm Bcsdpfx Aju A Ducoafju Power consumption 30 kW Tool holder turret VDI 40 Equipped with Turret Hinged belt conveyor Complete documentation available! Machine is ready for use and can be tested on-site!

Condition: excellent (used), functionality: fully functional, operating hours: 58,000 h, laser power: 5,000 W, TRUMPF Trumatic L 3050 - 5 kw TECHNICAL DATA: Make TRUMPF Type Trumatic L 3050 - 5 kw Year of manufacture 2005 Working area 3,000 x 1500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. Sheet thickness Mild steel 25 mm Max. Sheet thickness stainless steel 20 mm Max. Sheet thickness aluminum 12 mm Operating hours approx. 58,000 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - Laser unit: TLF 5000 CO2 laser, high-frequency excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Gantry drive in combination with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting Bcjdpfxjrgaw Hj Aafou - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change cutting head device - Automatic sheet outer edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Position laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated with nitrogen ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network connection - Electrical equipment for three-phase current 400 V / 50 Hz - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - Additional laser cutting head with 9-inch lens - NEW transmitter tubes on delivery

Condition: like new (used), Year of construction: 2007, operating hours: 106 h, functionality: fully functional, color channels: 5-colour with coater, paper width (min.): 585 mm, paper width (max.): 740 mm, Great XL 75 machine in excellent condition and equipment Lacquer tower (chamber blade system) Prinect Axis Control Prinect Press Center with remote control for ink zones, ink ducts, and circumferential, lateral, and diagonal register with Job Memory Card and touch screen Alcolor Vario film dampening units with recirculation and cooling CombiStar ink unit temperature control (water-cooled) Autoplate XL fully automatic simultaneous plate changing system (plate change in 1 minute for 5 plates!!) Preset automatic format adjustment automatic ink roller cleaning device automatic blanket and impression cylinder cleaning device Grafix powder sprayer IR dryer DryStar 2000 Bcjdpfx Aasx S Npfefou Extended high pile delivery Standard accessories

Condition: excellent (used), Year of construction: 2012, From previous federal ownership, we offer you this meticulously maintained Miele laboratory dishwasher, model G7883 CD, as a complete system including three racks, directly from first ownership. The entire system was purchased in 2012, has been continuously serviced until 2025, and is in impeccable optical and technical condition with no significant damage—see photos. Minor scratches on the housing and slight discolorations may be present due to normal use, but these do not affect the functionality of the system in any way. The machine was used exclusively for scientific purposes and has never seen commercial or industrial operation. It is an under-counter version, which means it does not have a cover and has a reduced installation height of 820 mm instead of 850 mm. Included in the scope of delivery are the three racks as shown in the photos. Technical specifications and features: - Capacity for up to 37 narrow-necked bottles, 96 pipettes, or 1,600 test tubes - Automatic Multitronic Novo Plus control system with 10 standard programs and freely selectable parameters - 2 integrated dosing pumps for cleaning agents Bsdpjx S Hv Nofx Aafjcu - HEPA filter H13 plus pre-filter - Circulating pump with a maximum of 400 liters/min - Dimensions (W x D x H): 900 x 720 x 850 mm (820 mm for the version without cover) - Weight: approx. 101 kg The device can be collected from us during normal business hours. The total shipping weight including pallet and accessories is approx. 140 kg! Shipping by freight forwarding is also possible for an additional charge. Sale is strictly to commercial customers. You will naturally receive an invoice with VAT shown. Private buyers may purchase the device on a commission basis; direct commercial sales to private individuals are expressly excluded! The item is sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to damage claims resulting from grossly negligent or intentional breach of duty by the seller, nor for injury to life, limb, or health. For any further questions regarding pricing or technical details, please feel free to contact us at the address provided.

Year of construction: 2013, condition: ready for operation (used), MULTIVAC R-275 – SLICKER CD SKIN/MAP – 2013 Bsdpfx Ajx A Aiqjafocu - YEAR OF MANUFACTURE – 2013 - THE MACHINE WORKED IN SWITZERLAND AND WAS VERY THOROUGHLY SERVICED. - IN 2025 – A COMPLETE TECHNICAL INSPECTION WAS PERFORMED BY MULTIVAC SERVICE IN SWITZERLAND. - MACHINE USING RIGID FILM. - PERFECT TECHNICAL CONDITION. - ONE SET OF MOULDS – ANY FURTHER SET UP UPON CUSTOMER REQUEST – ADDITIONAL PRICE FOR THE SET: 9,000 EUR. - THE MACHINE CAN BE VIEWED AT OUR OFFICE.

Condition: reconditioned (used), Mechanically overhauled machine with new LTG-StoreControl L control system 2 identical machines available External dimensions: Height 5,450 mm Width 3,380 mm Depth 2,920 mm 60 beams with a payload of 210 kg each Bjdpon D A N Hefx Aafecu with clear usable dimensions: W = 3,050 mm D = 813 mm H from 45 to 750 mm Total machine load capacity up to 2 x 33,650 kg Start of the service opening 900 mm above the top floor, then 800 mm high Color: GRAY/BLUE, beams sendzimier-galvanized, surfaces cleaned, signs of wear possible Performance values: Vertical drive 1 x 4 kW / 400 volts Horizontal drive 1 x 0.75 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: good (used), Year of construction: 2006, only approx. 145 million impressions Perfecting 2/3 or straight printing 5/0 Prinect AxisControl, CP 2000, Bcjdpfx Aaex R Snhsfeu Alcolor Vario, Preset feeder, Ink unit temperature control, Ink unit washing device, Blanket and impression cylinder washing device, Technotrans CombiStar CAN (air-cooled), Extended delivery, 2 modules (X2), DryStar 2000 air-cooled, PowderStar AP 232 powder sprayer, Chamber doctor blade system (coating unit), Anilox roller, StaticStar Compact antistatic device, RSP inline finishing system, Air supply via AirStar, air-cooled

Condition: good (used), Year of construction: 2006, only approx. 110 million impressions, CP 2000, Axis Control, Alcolor Vario, Preset streamfeeder, air-cooled ink temperature control, program-controlled washing units, coating unit with chamber doctor blade system, powder device Weko AP 262, air supply AirStar Pro air-cooled, perfecting 1/4 or straight printing 5/0 Bcedpfxex R Sl Tj Aafsu

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, Equipment: CE marking, Disc scalping screen, opening size 30 x 30 [mm], 9 shafts, passing 0/30 [mm], offset disc arrangement, driven by hollow-shaft gear motor. Auxiliary frame. Bedjxcb I Sjpfx Aafscu

Condition: new, The vertical shelving system is a sophisticated storage solution for the upright storage of long goods such as roof battens, skirting boards, pipes, or beams. It was specially developed for both commercial and private use and offers a particularly space-saving alternative to traditional horizontal storage. Thanks to the vertical storage, only a minimal footprint is required – ideal for confined storage areas or self-service areas in retail. The scope of delivery includes: 1x Vertical Shelving System, new Shelf height: approx. 3,050 mm Shelf depth: approx. 1,000 mm Bedpfowd Srmjx Aafocu Shelf length: approx. 2,360 mm Overhang: approx. 500 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: new, functionality: fully functional, power: 5.4 kW (7.34 HP), fuel type: diesel, color: yellow, overall weight: 181 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson Vibratory Plate Compactor DPU 3050 H, - NEW -! Weight: 181 kg, Frequency: 90 Hz, Centrifugal force: 30 kN, 500 mm working width, Hatz diesel engine 1B30 with 4.2 kW. Other sizes available! Location: Stock in D-46514 Schermbeck. _____ Bcsdpfx Ajx Rn Ecoafeu Wacker Neuson DPU 3050 H, buy DPU 3050, plate compactor 30 kN, vibratory plate 181 kg, new diesel plate compactor, Wacker diesel plate compactor, Wacker vibratory plate 500 mm, DPU 3050 Hatz 1B30, plate compactor with 500 mm working width, soil compactor 30 kN, reversible plate compactor, plate compactor Hatz diesel, plate compactor 4.2 kW, buy Wacker Neuson plate compactor, diesel paver compactor, Wacker Neuson compaction plate, DPU vibratory plate diesel, new Wacker DPU, construction machines Schermbeck, plate compactor immediately available, Wacker plate compactor in stock.

Condition: good (used), Year of construction: 1992, Spray machine -Closing force: 25 tons Bsdpfx Aeb A H Rnjafocu -Screw diameter: 22 mm -Unilog 2040 control unit -Slat spacing: 250x250 mm -Data collection terminal -Parts removal device, manufacturer ASS -Temperature control unit, manufacturer Single

Condition: like new (used), Year of construction: 2015, Lead and feed screw lathe Kern, operating hours: 3400 Turning length: 2000 mm Swing diameter: 650 mm Swing over cross slide: 420 mm Fixed steady rest Bjdpfx Aoxwm Rbsafjcu Multifix tool holder size C Schunk three-jaw chuck, diameter: 315 mm Operating manual,

Condition: excellent (used), Vötsch Bodpsw S E N Tofx Aafjcu Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)