Used Jogger Table for sale (46,181)

Condition: good (used), Paoloni format saw 330cm carriage up and down blade electrically adjustable culaga on the right side electrically adjustable Hjdpfx Afen Atafoijnu inclination 0-45 degrees manually adjustable motor 5.5KW undercutter max blades 400mm weight 920kg, solid saw, checked, efficient

Condition: used, Pneumatic tilting roller table 1500x2000x900mm Hnodpfx Aouglrzjfieu Pneumatically tiltable roller table, stand. Size: 1500 x 200 x 900mm The height of the table in the open state: 1850 mm

Condition: used, We offer a table shot blasting machine - Škoda TMSO 2.4/5. The machine is equipped with two rotary work tables. Size of each table - diameter 1000 mm. Maximum workpiece size per table - diameter 1000 mm, height 500 mm. Turbine diameter is 320 mm. Turbine power - 11 kW. Filtration units - 2 units - each with power consumption of 2200 W. Total connected load of the machine - 23 kW. Hnjdpfx Ajxnwz Sefiju

Condition: used, Year of construction: 2009, Manufacturer : VDI Hjdpfovlzlgsx Afisnu Type: Accumulation table Year : 2009 Automatic unit counting / detection system. Belt width : 20 cm Plate size : 80 x 120 cm

Condition: used, Year of construction: 1971, Lot consists of: (1) High Table Cutter Technical Details: Strip cutter for textile cord Hedpfx Aoxfz Nhjfionu

Condition: excellent (used), Year of construction: 2005, table load: 15,000 kg, rotary table diameter: 1,600 mm, Specification Dimension of bed – width 1170 mm Hjdpew Uz S Aofx Afijnu height 290 mm length 2000 mm Dimension of slide - width x length (with no extensions) 1340 x 1300 mm height over the sliding surface 320 mm Length of travel along the „W“ axis 500 mm Rotary table surface clamping dimensions Ø 1500 mm Centering hole 100 H7 mm Height of the rotary table from the sliding surface 590 mm Number of clamping slots 9 Size of clamping T-slots. 22H7 Spacing of the T-slots 160 mm Speed of rotation smoothly controllable within the limits 1 ÷720 °/min Maximum centric load on the rotary table due to the workpiece mass 15000 kg Maximum eccentric load on the rotary table due to the workpiece weight (up to 750 mm distance of the workpiece center of gravity from the rotary table axis) 5000 kg Maximum rotary table bearing capacity – centre of gravity from table axis 500 mm Maximum torque on rotation 15000 Nm Maximum torque on stiffening 10000 Nm Maximum tilting moment to a plane perpendicular to clamping surface 15000 Nm Total time required for the table turning cycle through 360° 30 sec Working feed along the W-axis 1÷5000 mm.min-1 Fast feed along the W-axis 5000 mm.min-1 Oil working pressure (table stiffening) 5 MPa (drive pre-stressing) - MPa Table positioning accuracy Rotation Bilateral accuracy of the A-position setting by the ISO 230-2 16 µm Unilateral repeatability of the R-position setting by the ISO 230-2 8 µm Linear axis Bilateral accuracy of the A-position setting by the ISO 230-2 0,02 µm Unilateral repeatability of the R-position setting by the ISO 230-2 0,01 µm Table turning part peripheral accuracy ±0,01 mm

Condition: good (used), Table with grinding device (edge delamination) and two integrated breaking strips. Width: 3700 mm Depth: 2430 mm Hnjdpfx Asxnl Sfsfiou Height: 970 mm Weight approx. 1500 kg

Condition: used, Year of construction: 2015, functionality: fully functional, DrillMatic TA325/P/H/12/2/1/-180° rotating hydraulic/pneumatic index table 400x620 Manufacturer: DrillMatic Type: TA325/P/H/12/2/1/-180° Air connection: 4 ports. Hedpfx Afjukg Srjionu Index values: 3 4 6 8 12 Year of manufacture: 2015 Weight: 66 kg Table size: 400x620mm

Condition: good (used), -Stainless steel work table Hnjdpsb A I N Eefx Afiju -Design: stable -Base floor: 1 -Border -Storage -Dimensions: 2000/930/H930 mm -Weight: 82 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02020, We are selling a Delta LC400 rotary table surface grinding machine. Fully functional. Bearings and belts are new! Hnedpfjw A Rqxex Afieu

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 3,105 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height with scoring (max.): 150 mm, saw blade diameter: 450 mm, height adjustment type: electric, table height: 910 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, power: 7.5 kW (10.20 HP), Altendorf F45 Pro Drive The machine is new and configured as follows: Working height: 910 mm Hsdpfx Afjxaudhoijnu Sliding table length: 3200 mm Control panel at eye level for comfortable operation Cutting height: 150 mm with a 450 mm saw blade Main motor: 7.5 kW with three rotation speeds; features the AKE saw blade changing system 2-axis scoring unit with a safety LED light in the scoring area, enhancing operator awareness when the scoring unit is active Main motor and scoring unit ON/OFF buttons on the sliding table for convenient machine startup Mitre crosscut fence, extendable to 3500 mm, with angle correction Cutting width: 1300 mm with CNC, programmable via the screen Gobjxaudhskr A Tq Djkc Motorized rise, fall, and tilt adjustment (0–46°) for the main saw blade, with automatic cutting height correction when the blade is tilted The Altendorf F45 has long been recognized as the flagship of sliding table saws, consistently setting the highest quality standards for this type of machine.

Condition: new, Work and Assembly Table New Machine Year of Manufacture: 2023 The ergonomic work and assembly table ErgoPlan EP1 is equipped with a bench top made from selected, solid red beechwood. The surface is waxed and polished. The stepless height adjustment under load is smooth and precise—even with asymmetrical loading of the tabletop. TECHNICAL DATA Bench top without vises: 1,700 x 640 x 120 mm 2 vise keys: - Front vise made of solid cast iron/steel construction - Rear vise with robust aluminum box guide (with adjustable guide prism and plastic slide guide) Top thickness: 120 / 60 mm Usable lift: 300 mm ErgoPlan height: 780 mm Weight of bench top: approx. 95 kg Total weight: approx. 240 kg Hedpskwhwzofx Afienu An attached cover on the rear side serves as protection against shearing and as a pinching guard. The lifting unit is concealed in the left lifting column and thus protected from dirt and damage. Load capacity up to 400 kg Maximum overall height: 1,080 mm 2 ErgoPlan bench hooks, consisting of aluminum round bench hooks with ball locking mechanism, 30 mm, length 200 mm 1 vertical clamp for securing the workpiece from above, with 1 indexing bolt, adjustable up to 200 mm workpiece thickness, 360° swivelling Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1998, Lift table HANDY type 1250E - No 2 Table size: 700 x 700 mm Capacity: 250 KG Year of construction: 1998 Maxi lifting height: 1350 mm Voltage: 12 V Dimensions (L x W x H): 1400 x 600 x 1900 mm Hsdpfsxnb E Uex Afijnu Weight: approx 250 KG

Condition: used, Year of construction: 1995, functionality: fully functional, construction height: 360 mm, lifting height: 1,050 mm, load capacity: 3,000 kg, overall weight: 450 kg, total length: 1,350 mm, total width: 900 mm, for sale in excellent condition Scissor lift table HYMO SXU hydraulic Lift table 3000kg load capacity manufacturer: HYMO Type: SXU 30 8/9 year of manufacture: 1995 Platform size: 1350 mm x 900 mm Max. height: 1050 mm load capacity: 3000 kg manual control Hnjdpewav D Sefx Afiou Minimum height: 360 mm (from the floor to the top edge of the blue platform) motor: 1.1 Kw 380/220V 50Hz IP54

Year of construction: 2009, condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, Flat short-stroke linear axis for manual adjustment -Type: unfortunately without type designation -Travel: 25 mm -Position indicator: Fiama OP3A -Number: 1x linear axis available -Dimensions: 315/135/H55 mm -Weight: 3.3 kg Hnodpfsxln T Hex Afiju

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Hnedpfx Aou Dbkdjfieu Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm

Year of construction: 2023, condition: new, A hand-operated budget table grinding machine for the deburring, grinding and edge rounding of sheet metal parts. Hnedpfx Aelbmm Esfiou The ProGrinder is a manually operated deburring machine which is suitable for finishing sheet metal parts. With the ProGrinder you can deburr semi-automatically for an attractive price. With this machine, Q-Fin gives you the possibility to achieve high-quality edge rounding with little effort, simply remove burrs and even polish the surface to a high-gloss finish. Optionally, you can also mount an orbital head on the ProGrinder so you can apply a nondirectional finish to the product. New machine from 2023, can be delivered from stock. Ask us about the attractive price. Machine comes with 1 year warranty (excluding wear parts). Machine is located in Bergeijk, NL. Machine Power Supply: 230 V |50 Hz | 4 A | 1kW Maximum workpiece height: 120 mm Maximum workpiece width: 780 mm / Lengte onbeperkt Dimensions (LxWxH): 1435 x 1100 x 1510 mm

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total height: 300 mm, lifting height: 950 mm, load capacity: 1,000 kg, total length: 1,650 mm, total width: 630 mm, table width: 600 mm, roll diameter: 70 mm, power: 1.1 kW (1.50 HP), roll width: 600 mm, In total - 10pcs. Hnjdpjwgwktjfx Afisu

Condition: used, Year of construction: 1998, Lift table HANDY type 1250E Table size: 700 x 700 mm Capacity: 250 KG Year of construction: 1998 Maxi lifting height: 1350 mm Voltage: 12 V Dimensions (L x W x H): 1400 x 600 x 1900 mm Weight: approx 250 KG Hedpfx Aoxnb Enofijnu

Condition: used, Pneumatic tilting roller table, assembly table /ct1817/ Pneumatically tiltable roller table, stand. Hnjdpfx Aeuglz Nsfieu Manufacturer: Lenhardt Size: 2500 x 2000 x 900mm In the open state, the height of the table: 2250 mm

Year of construction: 2008, condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, positioning table flat short-stroke linear axis for manual adjustment -Type: RK C 80/194 -Travel: 50 mm -Number: 6x linear axis available -Price: per piece -Dimensions: 305/80/H45 mm Hsdexln N Iopfx Afisnu -Weight: 1.6 kg/piece

Condition: used, Ball transfer table 1600x490, 1600x785, 1000x1000 RA2030 Technical data: Year of manufacture: unknown Condition: good (used) available dimensions: 1600 x 490 mm, 1600 x 785 mm, 1000 x 1000 mm (with cutout at the corner) distance balls: 100/110 mm Height OK plate: 53 mm height OK balls: 73 mm Scope of delivery: one ball transfer table Optional: feet Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Hnodpfx Aok Abvyofisu

Condition: like new (used), Year of construction: 2017, Manufacturer: Kraus Hsdpfenr Hfysx Afienu Year of manufacture: 2017 board length: 1600 board width: 1400 Roller diameter: 100 mm, material: steel. Axle distance between rollers: 120 mm Load capacity: 2000 kg Lifting height: 1700mm Without hydraulic power supply unit! Chain drive, with gear electric motor. 1.1kW, 400V, 50Hz

Condition: used, Ball transfer table 1600x490, 1600x785, 1000x1000 RA2030 Technical data: Hodpfx Afok Abvveisnu Year of manufacture: unknown Condition: good (used) available dimensions: 1600 x 490 mm, 1600 x 785 mm, 1000 x 1000 mm (with cutout at the corner) distance balls: 100/110 mm Height OK plate: 53 mm height OK balls: 73 mm Scope of delivery: one ball transfer table Optional: feet Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Rotary table disc conveyor 1700-1600-Ø1500 with ejector 1330-100 Hedpfjrc D Nrex Afienu RA2025 Technical data rotary table: Length table: 1700 mm width table: 1600 mm diameter turntable: 1500 mm Overall height: 100 mm Adjusted table height: 790 mm, can be moved down to 590 mm Electrical data SEW motor: 380-415 V, 0,37 kW Electrical data drum motor: 24V Technical data diverter: Length/ belt length: 1330 mm belt width: 100 mm overall height: 840 mm Electrical data: 380-415 V, 0,25 kW Included in delivery: Turntable with feet Side guide Ejector with stand Optional: Light barriers 24V power supply for drum motor control cabinet/control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics