Used Jogger Table for sale (16,808)

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, overall weight: 100 kg, total length: 800 mm, total width: 2,000 mm, total height: 900 mm, Work Table AT 2000 with Beechwood Top and Sliding Door Mobile Baker's Work Table Beechwood Worktop Sliding Doors Stainless Steel Construction Dodpfsyunbqex Aaysuw Dimensions approx.: 2000 x 800 x 900 mm (W x D x H) Used device, cleaned Top sanded & newly oiled Visit our large showroom!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Cutting length: 3200 mm Maximum width: 1300 mm Blade diameter: 300 - 350 mm Saw blade tilt: 0-45° Blade rotation speed: 4000 rpm Dedpfx Aszk H Rboaysuw Approximate weight: 1300 kg.

Condition: good (used), Year of construction: 1997, machine/vehicle number: AB/113309, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 95 mm, cutting width (max.): 1,300 mm, saw blade diameter: 300 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,000 rpm, total width: 1,300 mm, overall weight: 750 kg, year of last overhaul: 2025, Equipment: CE marking, saw blade guard, scorer, SCM Si 320 Panel Saw Used machine Serial No. AB/113309, Year of Manufacture 1997 Article Number: JA_G260501 History The machine comes from a vocational school. Due to investment reasons, a new saw was purchased in 2026. The last maintenance was carried out in 2025, during which belts and various small parts were replaced. Description Cutting height 90° max. 95 mm Saw blade max. 300 mm Adjustment manual Scoring saw yes Cutting width 1300 mm Adjustment manual Table length 3200 mm Saw blade swivel 0° - 45° Adjustment manual Angle stop yes Power 400V / 50 Hz 4.0 kW Speed 4000 rpm Weight approx. 750 kg Dust extraction 100 + 80 mm Dimensions LWH 3600 x 2100 x 1400 mm Condition / Work Carried Out • Machine cleaned • Machine function tested • Age-related and usage-related signs of wear • Available from stock Subject to errors and changes in technical specifications. Note: Used Goods • Prices are quoted as ex-works prices (unless otherwise stated!) from our location in Ottendorf-Okrilla/Germany - free loading! (if not otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT shown. • All items are sold as seen, without any warranty claims. The buyer is free to inspect the items at our location. • Our general terms and conditions apply. • Special agreements are only possible in writing. Djdpfxey Uurqj Aayeuw • Any items in the background of the picture are not included in the scope of delivery. • Saw blades are for illustrative purposes only and are not included in the scope of delivery. Shipping Options: • We will gladly provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla, free of charge by arrangement. • (Optional: Our trained service personnel can assemble the machine at your location and provide a brief instruction. Travel, transport and service times are subject to an additional charge.)

Condition: good (used), Year of construction: 2010, machine/vehicle number: 423.04.253.10, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: AC, Equipment: CE marking, type plate available, We are offering a professional and immediately ready-to-use workshop set from the Austrian premium manufacturer Felder. The set consists of the precise Felder K 700 panel saw (year of manufacture 2010) and the matching mobile dust extraction system AF 14. Both machines are in well-maintained, fully functional condition and have operated flawlessly in a professional workshop environment until recently. Perfect for carpentry shops, interior design, or ambitious woodworkers looking for a complete solution. 1. Felder K 700 panel saw: Motor power: 5.5 kW (powerful S6-40% version) Voltage / frequency: 400 V / 50 Hz (three-phase) Equipment: Smooth-running aluminum sliding table, large extension table with pull-out stop bar and folding stop, solid parallel fence on round bar guide with fine adjustment, workpiece hold-down (eccentric clamp). 2. Felder AF 14 mobile dust extraction system (including): Model: Felder AF 14 (movable on rollers) Performance: Powerful motor with robust steel fan wheel Volume flow: Max. 2,350 m³/h for excellent chip extraction Comfort: Practical chip bag quick-change system Accessories: Includes a flexible extraction hose (as shown) for direct connection to the panel saw. The system is completely coordinated – connect and work dust-free immediately! Dsdsy Iptcepfx Aayjuw The machines can be inspected on site and tested under power after prior arrangement.

Condition: used, Year of construction: 2022, turning speeds 0,7-9,0 U/min Torque 2,5-10 Nm table load capacity - central/maximum 50 kg Dsdpfx Aaozip Iyjysuw welding current 400 A voltage 230 V

Condition: excellent (used), Year of construction: 1990, ALTENDORF F45 tilting circular saw with scoring unit Scoring unit Double roller carriage, tilting, parallel fence Extension table, table extension, anodized aluminum, table widening, anodized aluminum, upper guard, narrow and wide ----- Technical data ----- Tilting range: 45°, carriage length: 3,200 mm, cutting width: 1,250 mm, max. saw blade diameter: 450 mm, motor power: 5.5 kW, 3 speeds dust extraction port diameter: 80 / 120 mm Dujdpfx Aezipw Ijaysw Location: in stock at 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1992, Machine comes from a plant closure Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Dusdpfszimx Aex Aayow Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation Dujdpfxezimgtj Aayew - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, overall weight: 1,500 kg, Professional grinding table, scissor type with built-in fume and dust extraction. Used in grinding, polishing, soldering, welding and cleaning processes with hand tools. Dujdpfx Aov Tbaajaysw Built-in metal pre-filter, which separates coarse dust particles, metal filings and is designed to capture sparks so that they do not get into the filter (spark catcher). Electrically lifted table. Table equipped with rollers and pneumatic connections for connecting tools. New filter inserts have been installed in the extractor. Built-in table lighting. Device in very good condition. Parameters: Extraction capacity - 3000 m3/h Negative pressure - 2400 Pa Year of manufacture - 2011 Work table width - 1.90m Work table depth - 0.80m Overall dimensions: Work table: Length - 2.10m Depth - 1.40m Height - 2.30m Extraction: Length - 1.20m Width -1.00m Height - 2.35m Total weight - 1500 kg

Condition: like new (used), For sale is a used Felder K-540S panel saw with a cutting length of 3200 mm. The machine was only used for a short period and has been inspected and refurbished by our service team. Technical specifications: - Cutting length 3200 mm - Cutting width 850 mm - Cutting height 140 mm Duedpfx Aaszil Ebeyow - Max. saw blade diameter 400 mm - Height-adjustable + tilting - Incl. protractor scale - Motor power 5.5 kW / 7.5 hp - Year of manufacture 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Panel, circular saw, panel saw, Felder Reference: R-L0B9N

Condition: used, machine/vehicle number: 007686, X axis working area: 3765 mm Y axis working area: 1560 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Duedpeu Tliyefx Aayow Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 12

Condition: excellent (used), Saw motor: 5.5 kW Dusdpfszkvdqox Aayew Undercutting motor: 0.75 kW Max. saw blade diameter: 350 mm Angle adjustment Clearance: 100 cm Table length: 280 cm

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 910718, 1 Cloos workpiece positioning unit, consisting of a swiveling and rotating device with a protective screen in the center of the table. Center distance 2x2m, center height 1300mm, 180° swiveling unit, type GR502, motorized. Two rotating devices with opposing bearings are mounted on the platform of the rotary table. The drive side of the rotating device is designed as in type WPV-DP-5000 N. Load capacity per rotating device approx. 500 kg. Previously mounted on a Cloos welding robot ROMAT 76 S with Rotrol control, manufactured in 1990. No exchange, return, or warranty possible. Duodpfozkvarox Aaysw

Condition: used, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Service Performed General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance carried out regularly by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance included - Ideal for research, testing, and development applications Duedpfezii A Dsx Aayow Technical Data – Test Bench Feature / Value - Overall height of test bench: 1215 mm (without clamping device) - Width of test bench: 2005 mm - Depth of test bench: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Measurement transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Feature / Value - Overall height of control cabinet: approx. 1800 mm - Table top height: 1080 mm - Width of control cabinet: 650 mm (narrow table top) / 1450 mm (wide table top) - Depth of control cabinet: 700 mm (narrow table top) / 800 mm (wide table top) - Weight: 152 kg (small table top) 187 kg (large table top); with granite plate: 247 kg Site Requirements Feature / Value - Required space: 4.3 × 3.0 m - Required ceiling height: 2.5 m - Floor load capacity: 234 N/cm² Power Requirements Feature / Value - Voltage: 400 V three-phase AC with neutral and protective earth - Phase rotation: clockwise sequence - Voltage fluctuation: ≤ ±10 % - Short voltage dips: < 20 ms - Limits for continuous interference: interference class A according to VDE 0871 - Frequency: 50 Hz ± 1 % - Protective earth / ground resistance: < 0.3 Ω Connection and Fusing Feature / Value - Power supply: 400 V / 50 Hz (clockwise phase sequence) - Connector: CEE plug, 5-pin, 16 A - Fuse rating: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications!) Further questions can be answered by phone.

Condition: used, SCM shaper with tilting spindle, model T160, complete with a 4-roller feed system. Dodpjzktzgjfx Aaysuw

Year of construction: 2017, condition: new, functionality: fully functional, Universally applicable bridge-type swing-beam cutting machine with lift table. Model: 5300A Designed for the manual cutting of sheet and roll materials. Machine configuration includes the following components: • Model 5300A / 1600 x 800 / 800 kN • Blade holder rails for fixed sheet width mounted on the bridge • Plastic cutting pad, type HY 78 Additional equipment: • Automatic die shifting device • Unwinding unit with powered feed for roll materials • Material hold-down device mounted at the table infeed for securing roll material during cutting • Laser material positioning device with 4 cross lasers • 1 spare cross laser Automatic die shifting device Material hold-down device mounted at the table infeed for fixing roll material during cutting Unwinding device with motorized feeding for roll materials Laser positioning system with 4 cross lasers and 1 spare laser Technical data: Cutting force: 800 kN Table area: 1600 x 800 mm Table height, approx.: 1000 mm Max. material passage height: 190 mm Stroke, adjustable: 15 – 165 mm Adjustable stops: 40 mm Height of safety light curtain: 750 mm Machine weight, approx.: 5,100 kg Hydraulics and drives: Bridge travel drive power requirement: 1.5 kW Bridge travel time, approx.: 2 sec. Closing speed: approx. 90 mm/s Cutting speed: 33 / 5.5 mm/s Return speed: approx. 52 mm/s Hydraulic motor power: 4 kW Oil requirement: 200 l (ISO VG 46) (The required quantity of oil is not included in the delivery.) Plastic cutting pad: Quality: HY 78 natural Shore hardness (D): 78 Dimensions: 1600 x 800 mm Pad thickness: 10 mm Material: polypropylene Duodpfx Ajyly R Eoaysw

Condition: new, Year of construction: 2026, This machine is a powerful, precise and universal device in a compact body, created for all workshops, furniture manufacturers and carpenters looking for a powerful machine. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Precise saw cutting and height adjustment through a knob Parallel guide with microadjustment Table ground, made of cast iron with expansion capability Stable, uniform table saw design, intended for any carpentry work Integrated side table provides great cutting capabilities Technical data Maximum saw diameter 254 mm Duodpsvxhlgsfx Aayow Disc bore diameter 30 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 50 mm 90º maximum cutting depth 80 mm Worktable dimensions 350×800 mm Movable table dimensions 240×1320 mm S1 continuous work motor power 2.2 kW Power supply 400V Weight 180 kg Dimensions 1550×1900×820 mm

Condition: used, Year of construction: 2015, functionality: fully functional, operating hours: 240 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, year of last overhaul: 2023, Equipment: scorer, We are offering this used Altendorf F45 EvoDrive panel saw, manufactured in 2015. Main motor: 5.5 kW Saw blade diameter: 250-450 mm Scoring saw motor: 0.75 kW Saw blade that can be swiveled to one side Digital stops Parallel fence with a cutting width of 1300 mm Control panel at eye level Touchscreen control and buttons for input Double roller carriage with a carriage length of 3200 mm Front support roller 240 operating hours Included are 8 saw blades for wood, aluminum, and plastics. Some of these may need sharpening. The saw received a major service last year. During this service, defective parts were replaced, the roller carriage was serviced, and all angles were readjusted. Djdozkp D Djpfx Aayeuw Available from July 27, 2026. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), total height: 350 mm, overall weight: 5,000 kg, total width: 1,500 mm, table height: 350 mm, total length: 4,200 mm, Used steel clamping table 4200 x 1500 x 350 mm Djdpjuzaafofx Aayjuw Weight approx. 5000 kg

Condition: good (used), Year of construction: 2001, For sale is a Felder KF-700 SP circular saw/milling machine with a cutting length of 3200 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical data: - Cutting length 3200 mm - Cutting width 850 mm - Cutting height 103 mm Djdpjzichyjfx Aayjuw - Max. saw blade diameter 315 mm - 4 milling speeds - Direction of rotation switch - 3 motors, each with 3 kW / 4.1 hp - Year of manufacture 2001 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, combined machine Reference: R-B17MP

Condition: as good as new (ex-display), Year of construction: 2025, CMS Agil Lam Duodpfxjwd If Ns Aayjw Cutting table for Laminated Glas Glas Max. workable Size: 3.810 x 3.300 mm Thickness: 8+8 mm Min. Glas Thickness: 2+2 mm

Condition: used, Year of construction: 1996, includes: 3-roller feed system, continuously adjustable control panel on top, table extensions with retractable support and emergency/off switch, swivel adjustment from -5° to +45° via handwheel, with dial gauges, right/left spindle rotation, spindle diameter 30 mm. Location: Nattheim. Duodpfx Aaoy Iddioyow

Condition: used, Year of construction: 2024, New machine – Special price – Year of manufacture 2024 HAND GUARD Edition Single Flex unit. The image shows the system. HAND GUARD is based on early hazard detection to protect the operator from injuries and works in any application. The camera-monitored system first gives a visual warning to alert the user to an impending danger. If the hazard persists, the saw blade is lowered without causing any damage to the machine or material. HAND GUARD supports the processing of various materials such as wood, metal, and plastic. • Contactless and injury-free • Quick commissioning • 100% damage-free • Operates with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter can be fully retracted under the one-sided tilting saw unit as standard. Tilting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and tilt adjustment with a maximum saw blade protrusion of 179 mm (removal of the scoring unit may be required in some cases). Additionally, the control unit is positioned at eye level, allowing you to adjust the blade height and tilt, as well as, depending on the control package, the RPM and other functions. The new, clear industrial design marks the exceptional status of the Altendorf brand: This sliding table saw combines distinctive design with timeless aesthetics. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be locked steplessly in any position. The large double rollers keep the upper carriage absolutely precise in connection with the lower carriage within the respective guide rods. This running quality is maintained for decades, even under heavy use and contamination. The carriage construction is extremely torsion-resistant and dimensionally stable. An additional front support roller with a width of 300 mm is included, offering valuable support for cutting long workpieces on the rip fence. Positionable at 90° under the double roller carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction at the rip and angle fence when tilting the saw unit • Stepless fine control of the axes via +/# keys • Easy axis calibration • Machine diagnostics, operating hours counter, USB interface • Recall last dimension entry (back function) • Conversion of pointed to blunt measurements at the rip and angle fence • Shear cut function with automatic calculation of missing angles or dimensions • Advanced tool management for up to 100 tool memory slots • Storage of scoring position (3-axis scorer) • Input for main blade core thickness & cutting width • Input for main tool speed Additional functions • Grooving: automatic step-by-step positioning of the rip fence • Chain dimension function: cutting sequences with identical distances at the rip fence • Oversize angle cut • Calculator function with result transfer to the axes • Geometric shapes, calculation of missing angles or dimensions • False miters, calculation of missing angles or dimensions • 9999 storable cutting programs • Standard provision for remote maintenance • Template holder directly next to the touchscreen Included accessories for Edition Single Flex: • Double roller carriage with carriage length of 3000 mm • Vario drive 5.5 kW (7.5 HP) VAR Dujdpfx Aasyyap Eeyow

Condition: used, Year of construction: 2006, Motor-adjustable parallel fence Lengthwise stop with display One-sided motorized pivoting Sliding carriage 3000 mm Djdpfx Aozawiusayjuw 5.5 kW Scoring saw Location: Nattheim

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers Duedju N D Rqopfx Aaysw - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *