Used Itec for sale (201)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: Ncsdpfx Ajud N Hded Nol KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 Ncjdpfsud H Dmex Ad Njl SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, Year of construction: 2012, volume capacity 60 l/mim engine output 2 kW turning speeds 2850 U/min feed pressure 9 bar Ncodowa Umxspfx Ad Nsl Dimensions (LxWxH) 2400x1060x560 mm Total Dimension 2400x1250x1200 mm empty weight 280 kg

Condition: used, Year of construction: 1986, tube diameter 4-20 mm wall strength 2 mm bending radius min. 10 mm bending radius max. 75 mm Ncodpfxjwbi Hcj Ad Nol bending speed 35 mm/min pull up length of tube 2000 mm total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions ca. 3100x1000x1400 mm

Year of construction: 2013, condition: not inspected (used), functionality: unexamined, controller manufacturer: Siemens, controller model: SIMATIC, No minimum price – guaranteed sale to the highest bidder! Submitting a bid constitutes an obligation to collect the item within the specified timeframe, no later than 31/07! TECHNICAL DATA Joining force: max. 60 kN MACHINE DETAILS Dimensions & Weight Machine complete, operational: 22,000 kg Base machine: 20,000 kg Pure water tank: 1,500 kg Chip conveyor: 500 kg Machine with coolant tank and chip conveyor (without chip bin) W × D × H: approx. 5.40 m × 5.95 m × 3 m Machine during maintenance (space required to open control cabinet doors): approx. 6.0 m × 6.55 m × 3 m Storage conditions Temperature: -10°C to +50°C Relative humidity: max. 80% (non-condensing) Operating conditions Temperature: 15–35°C Temperature fluctuation max.: ±2°C/12 h and 2°C/h Relative humidity: max. 80% (non-condensing) Dust content at installation site: 1 mg/m³ Installation: in a closed, draft-free room Connection rating: 63 A EQUIPMENT With SIEMENS SIMATIC touch panel Ncsdpewyldnefx Ad Njl With partial conveyor belt

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 10700049, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 320 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 14, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Siemens Sinumerik 828 D X-axis travel: 450 mm Y-axis travel: 300 mm Z-axis travel: 320 mm Table Table length: 500 mm Table width: 350 mm Table clamping area: 450 × 300 mm Table load: 150 kg Number of T-slots: 3 T-slot spacing: 100 mm Spindle Njdpowd Sp Sofx Ad Nocl Spindle speed: 10,000 rpm Tool holder: SK 30 / BT 30 Spindle cooling: 25 bar internal cooling Rapid traverse and feed rate X-axis rapid traverse: 48 m/min Y-axis rapid traverse: 48 m/min Z-axis rapid traverse: 36 m/min Working feed rate: 12,000 mm/min Tool magazine Tool changer: 14-station Tool holder included: 20 × SK 30 Max. tool diameter: 90 mm Max. tool length: 200 mm Max. tool weight: 3 kg Chip-to-chip time: 2.8 s MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 20 A Connected load: 15 kVA Weight: 2.4 t EQUIPMENT - GRUNDFOS coolant pump - Cooling unit - 20 SK 30 tool holders included

Condition: used, Year of construction: 2018, Operational unit! Ncodjwctqbopfx Ad Nol Ask for additional information!

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, We now offer a flexible, reliable and affordable packing line based on 3 interconnected belt conveyors. The belt conveyors are a full 800 mm wide and are equipped with motors that can handle packages weighing up to 50 kg. The total maximum load per belt conveyor is 150 kg of simultaneous weight. The packing line is, for example, excellent for transporting packages/goods from manual packing tables to unloading, or as part of a simpler assembly line in manual production. The total length of the packing line is approximately 17 meters divided into the following 3 modules: - 2 belt conveyors with 7,950 mm in length - 1 belt conveyor with 1,080 mm in length. The packing line is equipped with 3 emergency stop buttons and a simple control cabinet where the speed of the conveyor belts can be adjusted with a simple control. The short belt conveyor is equipped with a gas spring that allows it to function as a stop function, i.e. if the track is lifted, the other conveyors stop. The conveyor tracks can also be purchased separately. Shipping is additional. Overview Model year: 2022 Nodpfx Adswcgaij Nscl Dimensions: Height: 0.85 m / Width: 0.8 m / Length: 17 m Manufacturer: Flexitechs Year of manufacture: 2022 Height: 750 - 850 mm Width: 800 mm Length: 17,000 mm total, 2 tracks of 7,950 mm, 1 track of 1,080 mm Speed: Up to 1 m/s Maximum weight: Up to 50 kg/package

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, The Rollertech-E PM 2000 is a machine designed for automatic pallet wrapping where traditional wrapping methods are not possible due to dimensions, load instability or lack of access to a turntable. TECHNICAL DATA • Wrapping height: 2000 mm • Display: 7-inch touchscreen • Control system: PLC controller • Charger: Built-in, high-frequency, 110–240 VAC, 50–60 Hz, 0.4 kW • Power supply: Batteries: 2 × AGM 12V, 85 Ah (24 VDC total) • Performance: Up to 100 pallets (80 pallets for PM version) per charge • Machine weight: 300 kg • Pallet height sensor: Photoelectric sensor • Pallet height: Manually set via control panel • Programs: 99 pre-programmed cycles • Speed adjustment: Lifting, lowering, upper and lower rotation • Photo sensor delay: Adjustable • Cycle types: Lifting; Lowering; Lifting and lowering with reinforcements at defined heights; Start from specific height; Top-only wrapping; Bottom-only wrapping • Password protection: Available for parameter security • Diagnostics: Shown on display • Charging monitoring: Shown on display • Distance from pallet: 110 cm • Minimum pallet weight: 80 kg (without film) • Minimum pallet dimensions: 40 × 40 cm Specyfikacja folii • Film roll height: 500 mm • Maximum film roll diameter: 275 mm • Film core diameter: 76 mm • Maximum film roll weight: 20 kg Njdpfxswn Hc Ie Ad Nocl • Maximum film thickness: 35 microns

Condition: like new (used), It's in an excellent condition Ncedpfx Adov Rbxqe Njl

Condition: used, Year of construction: 2017, Operational condition SPI machine. Ncjdpfx Asw Ty Rbsd Njl Ask for specification!

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Ask for specification! Ncjdsw Ty Hcepfx Ad Nol

Year of construction: 2019, condition: new, The subject of sale are the Steritech AV20 autoclaves. Ncodpfx Adjuabr Dj Nsl Steritech Company Year of production 2019 / New Type AV 20 Capacity 6 trolleys Working temperature 158 degrees Celsius Working pressure 5 bar Control Siemens Simatic

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 400 h, product width (max.): 450 mm, working width: 450 mm, Material width 450 mm Print width 445 mm Jumbo rolls D 1000 mm Print length 228.6 mm to 609.6 mm 8 flexographic printing units 8 UV cassettes 2x hot air drying Printing speed max 150 m/min Feed printing unit +/- 4 mm Punching width 450 mm Punching length from 304.8 mm to 609.6 mm Rewind diameter D 800 mm Materials to be printed: Self-adhesive labels (paper, PET, BOPP, PVC) Paper from 30 to 200 gsm Film from 20my (BOPP), 35 my PVC/PET, shrink 12 my PET Cardboard up to 400 gsm Accessories: 16 impression cylinders 8 anilox cylinders Ncsdeqa Ax Njpfx Ad Nel 1 die-cutting cylinder 1 IEEC corona treatment (one-sided) 1 Meech web cleaning unit (double-sided) 2 punching units optional 1 turning cross 1 Delam/Relam 1 Coldfoil unwinder 8 LED cassette dryer GEW We would be happy to make you an offer.

Year of construction: 2025, condition: new, The rotor mills RM 250 is ideally suited for the milling of soft & medium-hard samples like chemicals, charcoal, limestone, ceramic (porous), coal, chalk, sulfur, citric acid, sugar, titanium chips, glas, tire wire and many more! Ncedpfx Adef Ulibe Nol Max. feed size*

Year of construction: 2025, condition: new, The hammer mill HM 300 is ideally suited for grinding soft, medium-hard, brittle materials such as catalysts, electronic scrap, gypsum, epoxy resin and many more. Max. Feed size Njdpfef Ulynex Ad Nscl

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 04006, For sale is a stretch wrapping machine with a conveyor belt and scale. The machine was in the shipping department. Several programs can be started directly on the machine or via a cable switch (operated from the forklift). Nedpfx Adewl Hp Ne Njcl Process: The package is placed on the roller table of the machine by a forklift. The machine starts at the push of a button, is wrapped automatically, the film is separated, the package moves along a roller conveyor to the unloading station, and is weighed. The package is unloaded from the unloading station by a forklift. All information is provided without guarantee. Sale to commercial customers only. Viewing by appointment in 94424 Arnstorf (Germany). Pickup in 94424 Arnstorf (Germany).

Year of construction: 2025, condition: new, The LITech hammer mills HM 120/200/300/400 are ideal for the pre-shredding of medium-hard, hard-tough & brittle materials such as floors, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals and much more many more!! Ncodpfxsg Ay Dhe Ad Nsl

Year of construction: 2025, condition: new, The LITech jaw crushers are ideal for pre-crushing extremely hard, medium-hard, hard-tough and brittle materials such as rubble, bentonite, soil, precious metals, ores, ferroalloys, glass, kaolin, catalysts, ceramics, clinker, coal, coke, minerals, non-ferrous materials -Metal, Slag and many, many more!! Nsdpfx Aegchb Ujd Nscl

Year of construction: 2024, condition: new, The shredder is ideal for shredding heterogeneous materials. Njdpfx Adsgkr I No Nscl

Year of construction: 2024, condition: new, The jaw crusher JC 300 is ideally suited for crushing of hard, brittle, hard tough samples like ceramics, clinker, coke, construction materials, ferro alloys, glass, minerals, ores, precious metals, rocks, silicon, slag and many more. Max. feed size* Nedpfof Uclfox Ad Nscl

Year of construction: 2025, condition: new, The pulveriser PM 2 is ideal for grinding hard, brittle, hard-tough materials such as ceramics, clinker, coke, building materials, ferro-alloys, glass, minerals, ores, precious metals, minerals, silicon, slag and many more. Nsdpfsf Ulyrex Ad Necl

Year of construction: 2024, condition: new, The Ball mill is ideal for grinding hard, brittle, hard-tough materials such as catalysts, ceramics, clinker, building materials, glass, minerals, ores, minerals, silicon, slag and many more. Nsdpfx Ajku A H Ued Nscl

Year of construction: 2024, condition: new, The Rod mill R-BM is ideal for grinding hard, brittle, hard-tough materials such as ceramics, clinker, building materials, glass, minerals, ores, minerals, silicon, slag and many more. Ncedpfx Aogbubcjd Nol

Year of construction: 2024, condition: new, LITech riffle splitters are used to accurately divide laboratory samples such as sand, gravel and similar materials. Designed for large capacities, the RS 100 riffle splitter qualitatively and quantitatively divides your laboratory sample quickly and easily. Ncedpfjgi A Nxox Ad Nel You can effortlessly set the following sizes: 12 - 24 - 36 - 48 - 60 - 72 - 84 - 96 - 108 mm. The scope of delivery includes a 26 litre feed funnel and 2 collecting trays.