Used Inverter for sale (1,799)

Condition: as good as new (ex-display), Year of construction: 2021, Number of spindles 5 St. Working width 230 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ----- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Dsdpewgwmhefx Ailocn Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment range axial 20 mm Connecting piece D = 125 mm Aspiration individ...

Condition: used, Year of construction: 2013, Overview This KOSME JETCLEAN G 16/960 1T UP is a rotary air rinser built in 2013. It cleans empty bottles and containers automatically before filling: the containers are turned upside down and blown out with filtered air through moving air nozzles, so loose particles and contamination are removed before the containers reach the filler. It suits bottlers who want a dry cleaning step for empty PET bottles ahead of filling. The containers are held in grippers on the rotating carousel and inverted for the air treatment. The machine is fully enclosed by transparent safety doors and is operated from a KOSME touch panel with production data and recipe management. It covers container formats from 400 g/ml to 2 kg at an output of up to 6,000 containers per hour; the format currently set up is a 2 L PET bottle, other formats via the available change parts. Technical data - Manufacturer: KOSME - Model: JETCLEAN G 16/960 1T UP - Year of manufacture: 2013 - Machine type: rotary rinser for empty containers, air blowing - Treatment medium: filtered air - Format range: 400 g/ml to 2 kg containers - Output: up to 6,000 containers per hour - Current format: 2 L PET bottle - Dimensions: approx. 2.5 x 2.5 m Equipment - Rotary carousel with container grippers and inverting section - Moving air nozzles for blowing out the containers - Transparent safety doors - KOSME touch panel with production screen and recipe management - Electrical documentation and wiring diagram Condition Used. The machine is still installed at the operator's site in Germany and can be inspected by arrangement. Availability Dcsdpfsz Et Utox Ailjn Available after decommissioning in week 43 of 2026 (late October 2026). Location: Germany.

Condition: excellent (used), functionality: fully functional, Four-side Planer Weinig Unimat 2000 Djdpfey Emi Aox Ailecn Working width: 230 mm Working height: 160 mm Number of spindles: 8 Spindle arrangement: Bottom 11 kW 12,000 rpm Right 7.5 kW 6,000 rpm Left 11 kW 12,000 rpm Right 7.5 kW 12,000 rpm Top 11 kW 12,000 rpm Bottom 7.5 kW 12,000 rpm Top 11 kW 12,000 rpm Bottom 30 kW 6,000 rpm Feed speed adjustable via inverter up to 36 m/min 4 powered feed rollers in the worktable Pneumatic material pressure rollers Total machine power: 106 kW Year of manufacture: 2002

Condition: excellent (used), Catalog number 6393 TECHNICAL DATA - max. width of the workpiece 200mm - max. height of the workpiece 150mm - number of spindles 4: 1) horizontal, lower 200mm, 5.5kW 2) vertical, right 150mm, 4kW 3) vertical, left 150mm, 4kW 4) horizontal, upper 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm - spindle speed 6000 rpm From above: - 6 feeding rollers, toothed, including 2 double rollers - 1 feeding roller, rubber From below: - 1 feeding roller, toothed, twisted in the lower table - 3 side pressure rollers - 1 discharge roller, metal, smooth - all rollers are pneumatically pressed - length of the feeding table 2130mm Djdezu R N Nspfx Ailocn - table adjustable up/down - central lubrication - electric setting of planing thickness - lifting motor 1.1kW - stepless feed speed adjustment on a frequency inverter - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle 4x130mm - dimensions L/W/H 3550x1750x1800mm - weight approximately 3000kg ADVANTAGES – with 4 heads – ideal for wet and dry wood – DTR documentation – used machine, very good condition Net price: 49900 PLN Net price: 11605 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (the price may change in case of larger exchange rate fluctuations)

Condition: used, Technical details: load capacity: 800 t Dodpsv A Uzijfx Ailjcn total wight: 12,0 / 8,6 t voltage: 380/440 V dimensions L x W x H: 6,9 x1,5 x1,8 m dimension L-W-H: 5,8 x 1,25 x 1,25 m Welding positioner 1x mounting bracket with integrated electric cabinet driven 1x rotating mounting bracket Running speed infinitely variable via frequency inverter Clockwise/anticlockwise rotation *

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA and electric welding hand Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Dcjdeu U Ihzjpfx Ailsn Protection class IP 23 Water-cooled and frost protection Gas-cooled torch head with remote control for welding current Shielding gas / solenoid valve Equipment: Hose package 7.0 meters Ground clamp and ground cable 3.3 meters *

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 640 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 16,400 W, number of axes: 3, This 3-axis KNUTH X.mill 640 CNC was manufactured in 2009. It features a total power of 16.4 kW and operates at 400 Volt with a frequency of 50 Hz across 3 phases. The machine is equipped with a new frequency inverter and a new braking resistor. If you are looking to get high-quality machining capabilities, consider the KNUTH X.mill 640 CNC vertical machining centre we have for sale. Contact us for further details. Djdpfez Ep N Hsx Ailscn - Voltage: 400 Volt- Frequency: 50 Hz / 3 Phases- Frequency Inverter: New- Braking Resistor: New- Manufacturer Error Description: Main spindle motor feels loose or offers resistance when turned manually (possible issue with belt, pulley, or top spindle mechanism). Main spindle motor encoder may require repair (sends positive signals only, negative signals required for proper positioning).

Condition: excellent (used), CATALOGUE NUMBER 7220 Dodpfxoztzd Us Ailecn TECHNICAL DATA - min – max width of workpiece: 20 – 230mm - min – max height of workpiece: 8 – 160mm 7 spindles: 1) horizontal, lower: 230mm, 5.5kW 2) vertical, right: 160mm, 5.5kW 3) vertical, left: 160mm, 5.5kW 4) vertical, right: 160mm, 5.5kW 5) vertical, left: 160mm, 5.5kW 6) horizontal, upper: 230mm, 7.5kW 7) horizontal, lower: 230mm, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm From above: - 10 toothed, metal feed rollers, including 2 double rollers - 3 side pressure rollers From below: - side pressure roller at the infeed - toothed, feed roller, rotatable in the lower bed - 2 side pressure rollers - grooved bed - toothed, metal feed roller - smooth, metal feed roller - pneumatically adjustable rollers - length of infeed bed: 2410mm - central lubrication of the bed - electric adjustment of cutting depth - lifting motor: 1.1kW - stepless feed speed adjustment via inverter: 6-30 m/min - feed motor: 5.5kW - feed via Cardan shafts - enclosed in a cabinet - diameter of dust extraction port: 7x160mm - dimensions (L/W/H): 5100x2190x1800mm - weight: 5400kg ADVANTAGES – with 7 heads – ideal for both wet and dry wood – DTR documentation available – used planer, very good condition Net price: 138900 PLN Net price: 32300 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may be subject to change in case of significant exchange rate fluctuations)

Condition: excellent (used), For sale: SEW-EURODRIVE MOVIDRIVE inverter, complete with a power module. Visual condition as shown in the photos. Technical data: Control unit: Manufacturer: SEW-EURODRIVE Model: MDX61B0550-503-4-00 Dcsdpfx Aijzphccelen Controller type: MDX61B-00 P/N: 08279691 Control unit P/N: 08243492 SO#: 01.1304473308.0001.09 Control unit SO#: 0189307 Protection class: IP00 Country of manufacture: Germany (Made in Germany) Power module: Model: MDX60A0550-503-4-00 Sach. Nr.: 8226636 Nr.: 0591425 Input power supply: 3×380–500 V AC ±10% 50–60 Hz ±5% 94.5 A AC (400 V) Operating temperature: 0…40°C Protection class: IP10 Output: 3×0 V 0–180 Hz 105 A AC (400 V) 73.5 kVA Lastart: M Installed communication modules: DFP21B DEH11B Additional markings: SEW Werk Wien service sticker: Rep. No.: 12424 Repair: 12/2011 Final inspection: 42/2011 Weight: 32.75 kg Condition: Visually in good condition. The housing has a crack (visible in the photos). Normal signs of use, minor scratches, and scuffs are visible. Sold exactly as shown in the photos.

Condition: new, We offer an SEW-EURODRIVE geared motor with a K87 gearbox, designed for industrial applications. Condition: NEW – warehouse stock. The unit is unused. It may have minor marks resulting solely from storage, transport, and handling. Technical data: Manufacturer: SEW-EURODRIVE Dcodpfx Aiozwx Raolen Type / gearbox number: K87 CM112L/BR/HR/TF/VR/RH1L/KK50 Identification number: 01.7380484601.0001X16 Gearbox: K87 Gear ratio: i = 8.29 Maximum gearbox torque: 2100 Nm Torque M₀: 65 Nm Torque Mpk: 157.5 Nm Motor speed: 0–4500 rpm Gearbox output speed: approx. 543 rpm System voltage: 400 V Frequency: 225 Hz Current I₀: 67 A Maximum current Imax: 184 A Brake voltage: 380–431 V AC Degree of protection: IP65 Insulation class: F Mounting position: IM M1–M4A / 80° Gear oil: CLP HC 150 Synth. Öl Oil quantity: 10.60 l Weight: approx. 146.9 kg Operation: only with a frequency inverter Manufactured in: Made in Germany

Condition: excellent (used), We offer an industrial frequency inverter/converter, the FLENDER LOHER DYNAVERT. Technical specifications: Manufacturer: FLENDER LOHER Series: DYNAVERT Type: A 2T2A-05400-002BADIOO EP. No.: 1079041 Serial number: 7375662 Input voltage: 3 × 400 (460) V Input frequency: 50–60 Hz Input power: 4 kVA Output voltage: 3 × 0–400 (460) V Output power: 3.8 kVA Output frequency range: 0–50–200 Hz Current: 5.5 A Operating temperature: 0 to +40°C Protection class: IP20 Design: S9 Dodpfezwx Tuox Ailscn CE marking Made in Europe The device is equipped with an operator panel featuring a display and a control keyboard, as well as communication connectors, as shown in the pictures. Condition: Used device, in good visual condition. The housing shows signs of use and storage. In one spot, there is damage/scratching to the housing's paint coating – see the pictures. The damage is superficial. The item being sold is exactly the one shown in the pictures.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: AE150, Stainless Steel Food Mixing Machine: Intended for sauerkraut mixing with carrots, beets, salt, spices, also for salad, kimchi mixing etc. The drum is rotated by inverter motor 1.5kW, with adjustable speed. The machine is solidly constructed and has a massive structure, made entirely of stainless steel. Mixing blades are screwed, and it is possible to replace them with a different shape of mixing blades. Dcjdpfx Aijd R Iwwslsn General Features: Machine-made entirely from high-quality stainless steel. Can mix high acidity products as fermented foods; Volume 100 liters, in one load, can mix up to 100 kg of products; Gentle mixing, minimal product damage. Very good for sauerkraut mixing; Can be used for Musli mixing. For other product, please, contact us; Can be equipped with wheels with a fixation for easy transportation; Easy to clean, can be washed with low-pressure water; All food contact elements made of stainless steel; Inverter motor can be rotated from 0-60 turns per minute; Automatic product discharge; Various electrical connections and standards available on request;

Condition: reconditioned (used), functionality: fully functional, power: 44 kW (59.82 HP), overall weight: 70,000 kg, total height: 5,400 mm, total length: 22,200 mm, total width: 5,400 mm, Rotary Drum Dryer Dutch Dryers - DX 3000 Rebuilt in 2021 Motor power 2 x 22 kW Drive chains and sprockets new Frequency inverter new Dodpfx Ajyxm E Rsilocn Can be disassembled into 6 parts Total weight approx. 70,000 kg Hardly any signs of wear

Condition: new, welding current 15 - 40 A cutting capacity 1 - 16 mm open-circuit voltage 96 V Required air-pressure min. 4 bar connected load 3,6 kW connected load frequency 230 V weight 9,0 kg Dimensions (LxWxH) 371 x 153 x 232 mm Dcodpsupxfhofx Ailon Exhibition machine !! Inverter plasma cutter with accessories: Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen Dsdpfxjfg E H Uj Ailecn electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Dcodpfx Aszcaufjilon Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Condition: used, *TECHNICAL DATA* Labelling machine for self-adhesive labels with 2 stations Front, back or wrap-around (roll-on) label Label width: 5-300 mm Label length: 10-500 mm Bottle format: round bottles and square bottles Capacity: up to approx. 6000 bph. (depends on bottle size) Complies with CE directive Weight: approx. 600 KG Dimensions:  2800(L) x 1300(B) x 2400(H) mm YouTube Video: *EQUIPMENT:* TouchScreen SIEMENS Control SIEMENS Inverter SIEMENS Station 1 front label Station 2 back label/wrap-around (roll-on) label Dcedpfxjz Iaw Hs Ailen -belt conveyor for stabilising the containers with drive -2 side belt conveyors in the infeed for separating the products Video:

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,550 mm, total width: 2,250 mm, total height: 2,530 mm, overall weight: 5,200 kg, Special Offer – 5% Discount Available! Surface Grinding Machine SGC512AHD – Moving Column Type The MTP SGC512AHD Surface Grinding Machine is a heavy-duty precision grinder designed for machining large flat surfaces in tool rooms, production facilities, and metalworking workshops. Its moving column design, rigid cast-iron construction, and Mitsubishi PLC touchscreen control ensure high accuracy, excellent stability, and reliable performance. Hardened and precision-ground guideways with Durcite-B coated sliding surfaces reduce friction and provide smooth, accurate movement. The hydraulic table drive guarantees stable operation, while the precision spindle produces an excellent surface finish. Main Features • Mitsubishi PLC touchscreen control • Electronic handwheel • Moving column construction • Hardened and ground guideways • Durcite-B guideway coating • High grinding accuracy • Hydraulic table drive • Heavy-duty cast-iron construction • CE certified Standard Equipment • PLC touchscreen control • Electronic handwheel • Grinding wheel • Wheel flange • LED work light • Electromagnetic chuck • Balancing stand • Balancing arbor • Safety guards • Demagnetizer • Coolant system • Diamond dresser • Machine feet • Central lubrication • Tool kit Dedpfx Aioy Hr Uyelscn Included Equipment • Magnetic separator with paper filter • Full machine enclosure • Parallel dressing device • Dust extraction system • 2-axis digital readout (DRO) • Integrated magnetic chuck controller • 6 kW frequency inverter • Diamond dresser • Additional wheel flange Technical Specifications • Model: SGC512AHD • Brand: MTP • Table size: 500 × 1200 mm • Magnetic chuck: 500 × 1200 mm • Longitudinal travel: 1140 mm • Cross travel: 540 mm • Maximum spindle-to-table distance: 570 mm • Maximum workpiece weight: 800 kg • Grinding wheel: 350 × 20–40 × 127 mm • Hydraulic table speed: 5–25 m/min • Spindle motor: 5.5 kW • Spindle speed: 1440 rpm • Hydraulic motor: 2.2 kW • Vertical feed motor: 0.75 kW • Machine dimensions: 3550 × 2250 × 2530 mm • Machine weight: approx. 5200 kg Applications • Tool rooms • Manufacturing plants • Metalworking workshops • Precision grinding of tool steel, structural steel and cast iron • Production of precision machine components Transport & Delivery We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected for transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide technical advice, spare parts, and comprehensive after-sales support. Contact us for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: new, - manufactured entirely from stainless steel AISI 304, - designed for the internal rinsing of new bottles and jars, -completed with the use of pre-filtered air or water via spray nozzles prior to container filling *Method of function.* Djdpfez Icl Hjx Ailecn - the operator manually collects the container and inverts it over the spray nozzle; - the application of light pressure opens the liquid/pneumatic valve internally rinsing/blowing the container; - a short standing time should be allowed for any residual water to drain; - the machine will be supplied with water or air filtration system to suit customer requirements. *Production*: indicative up to 300 b/h *Dimensions:* 600mm X 500mm X H 600 *Weight:* 25 kg. Optional: recirculation with pump

Condition: used, machine/vehicle number: 208.023, capacity / hour ca.: 8000 Dcodpoz Icdcjfx Ailsn amount of capping heads: 8 working direction: right-left (CCW) Drive: inverter

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning, rotary valve airlock, silencer, frequency inverter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the cleaned return air was fed back into the production area. The filter system is labeled with H1 and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial No.: 000909 Airflow rate: 10,500 m³/h Filter area: 62.5 m² Weight of the filter system: approx. 1,600 kg Filtration: surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter unit: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Dcodez Ikzpjpfx Ailjn Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is separately rated with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency inverter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary valve airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of blades: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Capacity: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: The system includes: - Silencer, connection Ø 400 mm - Return air duct to the production hall - Complete system control - Danfoss frequency inverter - Automatic pneumatic filter cleaning - Rotary valve airlock - Extensive galvanized dust extraction and return air ductwork Large parts of the existing pipelines can be taken over after consultation. The system is still in its assembled condition. This allows the installation, duct routing and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Removal by: July 31, 2027 at the latest The system is sold in its current assembled condition. Dismantling, removal, loading and transport are entirely the responsibility of the buyer and at their own expense. If sold abroad, transport, export/import and customs duties will also be borne by the buyer. Inspection possible by appointment. Sale as is, without warranty. Selling price: 15,500.00 EUR Price net, any applicable taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete industrial Aagaard/Finnrose dust extraction and filtration system, manufactured in 2006, from a wood processing facility. The system is designed as a screw filter and includes a complete dust extraction control system with heat recovery. Dodpoz Ik Atjfx Ailjcn The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filter system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Below the discharge is a matching hopper with approximately 6 m³ volume on a mobile trolley, which is included in the scope of supply. The complete control cabinet for the dust extraction control and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw, and four cleaning groups, as well as a Schneider-Electric frequency inverter for the dust extraction fan. Technical data: Aagaard / Finnrose industrial dust extraction system / screw filter Year of manufacture: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions filter elements: approx. Length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for dust extraction control and heat recovery Frequency inverter for main fan Heat recovery / return air system available 6-m³ hopper on mobile trolley included Existing steel substructure can be taken over Extensive existing piping can be included by agreement Dimensions: Filter tower incl. rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower incl. substructure: approx. 6,882 mm. Availability / Dismantling: Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed no later than July 31, 2027. Dismantling, loading, transport, and any customs clearance will be carried out entirely by the buyer at his own cost and responsibility. All necessary skilled personnel, lifting equipment, cranes, and transport means must be organized by the buyer. Inspection possible by appointment. Sale from location in the existing condition. Technical specifications provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 29,500 EUR Price net, any statutory taxes and duties are additional. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 976 mm, total width: 686 mm, total length: 1,152 mm, input voltage: 400 V, overall weight: 128 kg, type of cooling: water, welding current at 100% duty cycle: 350 A, input current: 24 A, welding current (min.): 5 A, welding current (max.): 350 A, input frequency: 60 Hz, Equipment: head guard, The EWM Tetrix XQ 350 puls AC/DC W EX 8P is a modern TIG welding machine designed for professional applications. This machine combines high efficiency, advanced welding functions, and energy-saving technology, making it an excellent choice for demanding professional welding tasks. * Energy savings thanks to high efficiency and standby mode. * Next-generation TIG AC/DC inverter welding machine. * Expert 3.0 control system with a 7-inch high-resolution display. * Welding processes and functions: * TIG AC/DC * TIG DC * TIG Pulse Dsdez Iltyjpfx Ailocn * activArc® * spotArc® * MMA * MMA Pulse * MMA CEL * MMA CEL Pulse * Compatible with remote control units and functional welding torches. * flexFit housing system allowing a wide range of accessories to be attached. * LED information bar indicating the current operating status. * IP23 protection class. * Automatic temperature-controlled cooling fan, reducing contamination and noise by operating only when required. * Tool-free welding polarity reversal. * Connectivity to the ewm Xnet software via LAN or Wi-Fi. * Earth fault monitoring with PE protection. * PC interface for PC300 XQ software. * High-performance 1500 W water-cooling system, high-performance centrifugal pump, and 8-liter coolant tank ensure excellent torch cooling.

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Dcodpfxow Tfw He Ailen Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Dcedpfxezgq Szj Ailen Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation