Used International S 1700 for sale (71,920)

Year of construction: 1995, condition: ready for operation (used), There are four Wrapping Machines H&S available, year of construction: 1x 1984, 1x 1986, 2x 1995. Iijdpfxsipv D Us Aquec

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Iodpfx Aswfg E Doqujic

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Isdpjwty Etjfx Aqujic

Condition: ready for operation (used), Year of construction: 2016, A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible. Iisdpfx Aewqqv Dsqusc

Condition: used, Manufacturer : Halvor Forberg A/S Model: F-1000 Iijdpfx Asx R Db Hequec Type : Paddle mixer Nominal volume : 1000 L Min volume : 400 L Max volume : 1400 L Total discharge : pneumatic Power : 15 kW Weight : 3000 kg

Condition: good (used), Metal detector for conveyor belts, all-metal detection system, tunnel metal detector -Manufacturer: SS Temafa, Metal Detector All-Metal Detection System -Metal detector: SS TFX 4000/440 -Detector opening: Ø 440 x 530 mm -Control: Temafa MSG 4-FF Iiodjrz Syyopfx Aquoc -Individual components: see photos -Dimensions: 750/530/H790 mm -Weight: 96 kg

Condition: good (used), Static Mixer, Disposable Mixer, Plastic Spiral Mixer -Manufacturer: tsi, Static mixer SULZER QUADRO MGQ 10-19D 15 pieces -Version with Luer-Lock attachment for dispensing needles Iisdpfsu Aiftsx Aqusc -Industrial standard connection can also be used for other cartridge systems -Thread: MGQ Series 7/8" - 9 UNC coarse thread -Quantity: 3 bags with 15 pieces each available -Distribution/Price: per bag, minimum order 2 bags -Bag dimensions: 190/130/H40 mm -Weight: 0.2 kg/bag

Condition: used, Cutter head, milling holder, carbide cutter, indexable cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head SK50 -Type: Secodex 220.17-0063 -Recording: SK50 -Cutter head: Ø 63 mm / 3 carbide inserts -Total dimensions: Ø 97 x 230 mm Iijdpfsub D Rrex Aqusc -Weight: 3.6 kg

Year of construction: 2020, condition: used, Shock absorber, gas spring, shock absorber, start-up damper, impact damper -Manufacturer: Bansbach, gas pressure spring easylift type HONOF42-685-1417-001 060N -Piston: Ø 22 mm -Total length: 1435 mm -Piston rod: Ø 10 x 685 mm Iiedpjtlzhbsfx Aqujc -Quantity: 20x gas pressure spring available -Price per piece -Dimensions: Ø 22 x 1435 mm -Weight: 0.9 kg/piece

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 9,999 h, machine/vehicle number: 0013, BERNARDI ASPHALT MIXING PLANT 100T/HR Isdpfx Aqsyhl Hdjujic 3 PC. OF BITUMEN TANKS GAS HEATER FULLY MOBILE ON TRAILERS 60T HOT MIX STORAGE

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Isdpfx Aqjw H Naasujic Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas suction fan Ijdpfxerw A U Io Aqueic -Manufacturer: Coral, dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg

Condition: used, functionality: fully functional, Vertical insulated stainless steel tank Exterior dimensions: Dia Ø 2850/3000 mm, total height 5500 mm. Vertical, insulated stainless steel tanks – 2 units. Capacity: 30,000 L 50 mm insulation, completed with aluminium TRP plates. Conical bottom with 3" outlet. Iiedpfsxp Hihjx Aqujc Conical top with ventilation. Manhole in lower part of the cylinder. Brand: Gjettermann & Nielsen A/S Quality: AISI 316 (V4A).

Condition: new, Year of construction: 2025, operating hours: 3 h, functionality: fully functional, feed rate X-axis: 7 m/min, workpiece weight (max.): 1,000 kg, working width: 2,500 mm, volume flow: 8,000 m³/h, year of last overhaul: 2025, overall weight: 3,200 kg, type of input current: three-phase, passage height: 210 mm, total height: 2,350 mm, total length: 2,450 mm, total width: 3,500 mm, working height: 950 mm, Ceetec DuoFlex Spray – The Coating Machine for Joiners, Furniture Makers, CLT and Glulam BSH Suppliers, and much more cases. Wherever a solid, straightforward, yet exceptionally well-equipped machine is needed, the DuoFlex Spray surface spray machine comes into play. Spraying doesn’t have to be complicated – not when you have a robust, long-lasting machine (made in Denmark, electronics from Germany – Beckhoff and others) that puts the operator at the center of it all. Everything is intuitive and easy to use, yet you get features you’ll struggle to find elsewhere – or only in significantly more expensive machines. Here are some hard facts about the DuoFlex Spray: 1. Color changes in just 3–5 minutes 2. System volume only 2.5–3L of paint/lacquer 3. Suitable for both solvent-based and water-based coatings 4. Two fully separated circuits – ideal for solvent/water or clear/topcoat separation 5. Maximum reproducibility – thanks to smart programming that stores all key parameters automatically 6. Quick to learn – after just 4–6 hours of training, even a baker can spray better than a manual sprayer with 10 years’ experience 7. Modular expandability – drying systems, sanding units, preheating, robotic integration – all from a single source 8. Service that speaks your language – our owner spent nearly 10 years as a coatings manager and brings hands-on expertise to your shop. The machines are extremely durable, and if anything should go wrong, we maintain well-stocked spare parts warehouses in both Germany and Denmark Processing dimensions for the DuoFlex Spray: 1. Standard: 1,300 mm width × 200 mm height 2. Larger: 1,800 mm width × 200 mm height 3. Up to: 3,200 mm width × 330 mm height Length: from 250 mm up to virtually unlimited. If you want to coat CLT ceiling panels 16, 18, or 20 meters long, we’ll simply build the right handling system for you. Iisdpfx Aqjffc Tyjuec Sound interesting? Would you like to try the machine in our technical center? Do you have specific requirements and wonder if we can deliver? Then I’ll be happy to help you personally. Best regards, Martin Bruhn Owner, Bruhn Lackieranlagen // Exclusive Sales Partner of Ceetec A/S – Middelfart, Denmark

Condition: new, Working width 3500 mm Iodpfx Aqsd Ih H Sjujic Working height 2300 mm Number of cylinders 4 St.

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- Iisdpod Ih H Nefx Aqujc quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. Iiedpfx Aqjhg Rcxeuec To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: excellent (used), functionality: fully functional, Evaporative Condenser Baltimore Aircoil International VXC-250 Iiedpfoxpxiaex Aqusc Manufacturer: Baltimore Aircoil International Model: VXC-250 Serial Number: H160220703 Dimensions: 3600 × 3530 × 5000 mm The BAC VXC-250 evaporative condenser is a high-performance unit designed for industrial cooling and HVAC systems. It operates based on the principle of evaporative cooling, which provides low energy consumption and efficient heat dissipation even under heavy loads. Robust construction and optimized fan efficiency ensure reliable operation and long service life. The VXC-250 model is adapted for operation in demanding industrial environments, offering high performance in a compact size.

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 20161259/2017, Filling system for all liquids. The system was used to fill disinfectant bottles. The system was put into operation in 2017 and is still as good as new, having only been in operation for a few hundred hours. Iisdpfx Ajvmnkroquoc The article produced was only sold during Corona. It is also possible to purchase the complete product. Unfortunately there are only a few photos, but we would be happy to send you a video of the system in operation.

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces Iodpjuz Hmxefx Aqusic - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, Winkworth PV500 Mixing Tank with Load Cell Weighing Capacity 500 LTS Stainless Steel Ijdjwq Sn Ujpfx Aqujic Jacketed Load weighing Cells With Ancillary Equipment

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/8 Belt width: 500 mm Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum Motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Suitable for the following bulk materials, among others: Iiedpexk Tg Nofx Aqujc Potatoes, Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: used, Winkworth Jacketed Stainless Steel Mixer Tank Capacity 1000 LTS Jacketed Iijdpfx Aqjwq Sw Njujc Stainless Steel With ancillary equipment

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, laser wavelength: 1,060 nm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 35 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, table length: 3,100 mm, table width: 1,550 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 150 mm, positioning speed: 280 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 2,150 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 14 bar, overall weight: 12,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,500 mm, warranty duration: 12 months, space requirement height: 2,500 mm, space requirement length: 10,000 mm, space requirement width: 2,550 mm, Equipment: cooling unit, safety light barrier, Our flagship model: G3015 HF Expert 12KW Fiber Laser Cutting Machine The price includes delivery, installation, training, CAD-CAM software, and filtration system. Machine location: Germany. Delivery within Germany is free of charge. The HF Expert is one of our highest-quality and most compact fiber laser cutting machines. It is the perfect entry into professional laser part manufacturing and serial production. Han’s Laser stands out with utmost precision, robust industrial quality, and state-of-the-art fiber laser technology, and ranks among the industry’s leading manufacturers with around 17,000 employees and over 100,000 machines sold worldwide. This machine is ideally suited for steel fabricators, sheet metal workers, and series production facilities looking to cut up to 50 mm steel with 12 kW laser power while minimizing post-processing requirements. Thanks to its high energy efficiency, this machine can save up to 25% energy compared to a similar plasma system or CO2 laser system with the same cutting capacity. German customer service in NRW (Rhineland region) with 400m² parts warehouse. German-speaking telephone and on-site support with short response times. All our machines are installed and serviced by us. 80% of the machine’s components are German or European-made. 1.5 x 3 m cutting area X-axis [mm]: 3100 Y-axis [mm]: 1550 Z-axis [mm]: 180 Maximum speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions: Length [mm]: 10000 Width [mm]: 2550 Height [mm]: 2500 Maximum sheet weight [kg/table]: 2150 Available laser power: 6 kW, 12 kW, 20 kW Cutting capacity at 6 kW: Steel - 25 mm, Stainless steel - 18 mm, Aluminum - 18 mm Cutting capacity at 12 kW: Steel - 35 mm, Stainless steel - 35 mm, Aluminum - 25 mm Iedpfxsv Nzt Eo Aqusic • Fully enclosed for laser safety • Compact design reduces shipping costs and shortens installation time • Improved accessibility with side sliding door running the full length • Ergonomic loading and unloading for small workpieces • High dynamics and productivity thanks to powerful control and motors • Integrated control cabinet and laser source with maintenance-friendly access • Fast service response with “Remote Service” • Fully enclosed machine with OD5+ laser safety windows • Small footprint • Versatile operation with adjustable control panel, front door, and side sliding door Higher Dynamics & Productivity • The optimized machine bed and extruded aluminum portal, equipped with the fast real-time Han’s 901 controller (Rexroth) and powerful Rexroth motors, enable the HF Mini S to reach extremely high speeds and acceleration. Configuration and component selection: Control system: Han’s 901 (Rexroth, Germany) Servo drivers: Rexroth, Germany Cutting head: Precitec, Germany Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Exchange table: Han’s, China

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 64 S, Wiesheu Bread Oven Euromat – 2X 5 Trays | Year of Manufacture: 2020 | Excellent Condition | Incl. Mobile Base For sale: Wiesheu Euromat bread oven (10 trays) from 2020. The oven is in excellent condition and has always been well maintained. Iiedpfxsxyyazo Aquec Delivered including mobile base, ideal for flexible placement in a bakery, shop, or food truck. Specifications • Brand: Wiesheu • Model: Euromat 10 trays • Year of manufacture: 2020 • Condition: Excellent / minimal signs of use • Including mobile base • Professional quality, reliable and energy-efficient • Perfect for bakeries, hospitality, catering or market use Wiesheu is known for its durable and high-performance ovens. The Euromat series is popular due to its fast heat-up times, even baking results, and user-friendly operation. Prices excl. VAT Viewing possible. #Wiesheu #WiesheuEuromat #BreadOven #BakeryOven #CommercialOven #InstoreBaking #WiesheuOven #BakeryEquipment #ProfessionalOven #MIWE #Wachtel #Bongard #Debag #SvebaDahlen #Salva #CateringEquipment #BakeryOven #BakeryMachines