Conveyor belt

Mass International S.r.l. NDS

Condition: new, Year of construction: 2024, NDS 2 • Aluminum profile construction Fjdpfx Ajwktn Ajbgjgi • Adjustable angle/tilt • Length of inclined part: 1300 mm • Usable width: 350 mm • Loading length: 600 mm • Separating length: 800 mm • Minimum height (H min): 600 mm • Maximum height (H max): 1000 mm • Separator with blades included

Year of construction: 2013, condition: ready for operation (used), Clamping force: 250kN, distance between tie bars: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, screw diameter: 25mm, injection volume: 49cm³, injection weight (PS): 45g, injection pressure: 2000bar, cores: 2+5, heating zones: 12, pump hours: 2388h, automatic operation: 1600h. Including Multilift H with B-axis, clean room module. Fsdpfx Astyax Ejbgogi

Condition: excellent (used), Year of construction: 2008, operating hours: 56,000 h, For sale: Arburg 570-2000-800 injection moulding machine, year 2008. In very good technical and visual condition, operates very quietly, no oil leaks. Selogic control system. Bimetallic injection unit, 45 mm diameter. 1 x air, 2 x hydraulic core, robot interface. The machine is sold without material or colour additive feeders. Fgsdpfsukirbjx Abgji

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The cutting mills in the GSL series 300/400 to 300/800 are primarily intended for the shredding of production-related scrap material in the injection molding and blow molding sectors. In addition to the key advantages of the GSL series, the slow-running cutting mills GSL 300/400, GSL 300/600 and GSL 300/800 are particularly suitable for large-area parts, such as car door panels, bumpers or hollow bodies. The "V-arrangement" of the rotor blades keeps the pre-shredded material in the center of the rotor. This significantly reduces wear on the grinding chamber walls when grinding glass fiber reinforced plastics. Material sticking to the side walls is avoided. The staggered arrangement of the rotor disks means that only individual blades are used at any one time, so a higher cutting force is available in each case. Fedpfxsghgbho Abgogi

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/28 TECH Baujahr: 2007 Schließkraft: 28 Tonnen Holmabstand: HOLMLOS Fodou Eu Tnopfx Abgegi Schnecken DN: 25 mm Max. Hubvolumen: 49 ccm³ Spritzteilgewicht 44 g/PS Steuerung: CC200 Ausstattung: - 1 x Kernzug

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Fsdpfxog Ezars Abgsgi Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), Year of construction: 2019, ENGEL Victory 120 Injection Moulding Machine – Tie-Bar Less Machine parameters Model: ENGEL VC 500/120 Fjdpswq Splofx Abgsgi Clamping Force: 120 tons Control System: ENGEL CC300 Technology: Tie-bar-less design (VC – Victory series) Screw Type: S8 Screw Diameter: 40 mm L/D Ratio: 20 Drive System: Hydraulic with ECODRIVE SHV1 Additional Equipment: Plate Platen size HxV: 740x680mm Min Mould height: 300 mm Maximum distance between platens: 800mm Working hour: 12187 Key Features: 1. Modern tie-bar-less concept for flexible mould area access 2. High energy efficiency due to ECODRIVE technology 3. Precise control with ENGEL CC300 system 4. Robust hydraulic unit designed for demanding cycles Applications: 1. Plastic injection moulding for small to medium-size parts 2. Suitable for various materials depending on configuration

Year of construction: 2022, condition: new, For sale is a NS 2 conveyor belt from Mass International. You can buy the belt both with and without separating roller. Separator roller costs an additional € 332 Feed : 600 mm ascending belt : 1300 mm GB: 405 mm NB: 350 mm Fedpfof E E Iqsx Abgjgi Belt speed constant: 3m /min

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Fgodpfx Absilhfcogji

Condition: used, machine/vehicle number: 11415, Rotor diameter: 260 mm Rotor width: 260 mm 3-blade rotor, 2 rows of stator blades Inlet cross-section approx. 260 x 260 mm Drive motor 5.5 kW Fsdoghgl Ispfx Abgegi Grinding mill with built-in feeder for bar stock. Weight approx. 500 kg