Used International 1486 for sale (9,510)

Condition: used, Year of construction: 1970, material width 200 mm Kjdpfx Afovzxtgeijnc coil weight 0,075 t coil internal dia. 290 - 450 mm coil external diameter 800 mm 26 U/min power requirement 0,25 kW Dimensions (WxDxH) 0,9 x 0,8 x 1,7 m motoric driven, with manual centralized expansion as is where is, WITHOUT any additional work (see video)

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. (preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - Kjdpfx Ajxp Rywefisnc - All dimensions, weight and performance data are non-binding

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Bed Type Milling Machine Lagun GBR 42 Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel ranges: X: 4000 mm Y: 1200 mm Z: 1000 mm Spindle speed (max.): 4,200 rpm Tool holder SK50 DIN 69871 Internally cooled tools with 20 bar Table load capacity: 10,000 kg Swivel head: 45° diagonal milling head with 2.5° increments Kjdpfxexp Nxlo Afionc Tool changer: Drum-type changer with 24 tool positions (vertical tool change) Machine enclosure: Front cover with 2 doors, rear cover with additional door, lateral louvres for machining of extra-long workpieces Chip conveyor in longitudinal direction (discharge to the right) Control cabinet air conditioning Swivel arm for machine control (operation at front and rear) Can be inspected under power. Available immediately.

Condition: like new (used), Year of construction: 2015, operating hours: 14,717 h, functionality: fully functional, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 480 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 845 mm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, workpiece weight (max.): 7 kg, total height: 2,247 mm, total length: 2,890 mm, total width: 5,193 mm, overall weight: 7,800 kg, CNC controller: Siemens 840D sl with CELOS ERGOline Capacity X-axis travel mm: 480 (–10) Y-axis travel mm: ±100 Z-axis travel mm: 845 B-axis travel mm: ±110° (0,001º) C-axis: 360º (0,001º) Turning length mm: 800 Max. turning diameter mm: ø: 500 Distance between spindle centers mm: 1.020 Turn-mill spindle Speed spindle rpm: 12.000 Drive power kW: 22 / 19 Tool magazine Magazine places: 24 Tool holder: HSK-A63 Tool length max. mm: 300 Tool diameter max. mm: 125 Tool weight max kg: 7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 25 / 34 (100 / 40%) Spindle bore mm: 67 Maximun torque Nm: 380 / 280 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 20 / 27 (100 % / 40%) Spindle bore mm: 52 Maximun torque Nm: 170 Counter spindle travel mm: 800 Coolant system Tank capacity liter: 600 L High-pressure bar: 8 / 20 Equipment Chip conveyor Blowing air through spindle center selectable via M-function Signal lamp Tool measuring arm Workarea light Coolant gun Internal coolant supply Interface for Bar feeder Paper band filter Working time hours Under power: 36.049 Cutting Time: 14.171 Basic machine dimensions / weight Length mm: 2.890 Width mm: 5.193 Height mm: 2.247 Kodpfx Afexdlynsijnc Weight kg: 7.800

Condition: used, mileage: 200,000 km, Year of construction: 2016, Serial number: YV2XT40C6GA78xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21582 Specifications: Model year: 2016 Mileage: approx. 200,000 km EU-approved until 31.10.2025 Euro 6 Wheelbase: 460/137 cm 6x2 510 hp Full air suspension Retarder Kodpfxsxp Alro Afijnc Sand spreaders Extra lights Toolbox Full side opening Tail lift Remote control Tires (see photos) Internal length: approx. 6.98 m ( 16 pallets) Internal width: approx. 2.48 m Internal height: approx. 2.51 m Automatic Radio/CD Bed Video available Ready for delivery Description:2016 Volvo FM 500 6x2 box truck with full side opening and tail lift.Video available.Ready for delivery. Km: 200000 HK: 509 Technical approved: Yes EU-approved until: 31.10.2025 Own weight: 12676 Total Weight: 27500 Payload: 14749 Width: 260 Length: 937 Euro: 6 Model: FM 500 6x2 skapbil m/ full sideåpning og lift.

Condition: used, functionality: fully functional, Offered here are used 20DV office containers from Berlin. CONTAINER TYPE: 20DV Office Container CONDITION UPON DELIVERY: used, wind- and watertight, without equipment All containers are equipped with electrical installation and heating; the entrance door is located on the short side. Containers are sold in used condition and may exhibit defects, contamination, color variations, rust, etc. DIMENSIONS LxWxH: 6058 x 2438 x 2800 mm, internal height 2500 mm. Kedpfxjxp Hq Ss Afisnc AVAILABILITY: immediately TRANSPORT: You can provide us with your postal code so that we can send you a free, non-binding quotation for containers including delivery and, if necessary, unloading from the truck. ASSORTMENT: We also offer shipping containers in all standard sizes (20DV, 40DV, 20HC, 40HC...) for every requirement, whether for storage, construction projects, logistics solutions, or maritime transport. We look forward to hearing from you! MAGITU GmbH

Condition: used, material width 320 mm coil weight 2,6 t material thickness 0,5 - 2,0 mm coil internal diameter 400 - 510 mm coil external diameter 1200 mm no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 band speed 0 - 30 m/min power capacity 1,5 kW weight 1,5 t Dimensions (WxDxH) 2,0 x 1,4 x 1,9 m Straightening machine with infinitely variable drive, straightening rolls individually manually adjustable, pneumatic alligator opening of the roller cassette Decoiler with pneumatic lag break, manual centralized expansion Knjdpfx Asvuk Shofisc as is where is, WITHOUT putting into operation in our warehouse Price for commissioning (in given condition) on request

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, turning length: 1,105 mm, turning diameter: 610 mm, spindle speed (max.): 3,500 rpm, spindle bore: 70 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,137 mm, mount diameter: 63 mm, rotational speed (max.): 6,000 rpm, type of input current: AC, Equipment: rotational speed infinitely variable, The machine is in good condition. Major maintenance work in recent years: 30.04.2020: Milling spindle overhauled CHF 35,000 16.07.2021: Software update (Wenk AG) CHF 1,600 20.06.2022: Central lubrication pump replaced CHF 400 (All prices are in CHF) Known issues: - Error message during startup - Coolant from internal cooling leaks out at the rear of the milling spindle - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 different tool holders included Knodpfsxp Hmaox Afijc - Spare magazine sleeves for tool magazine - Spare limit switches for tool changer position monitoring - 2 x 3-jaw chuck diameter 250 mm (mounted for inspection) - 1 x 3-jaw chuck diameter 250 mm - 1 x 3-jaw chuck diameter 300 mm - 1 x 4-jaw chuck diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Various sets of used soft jaws - Spare filters for the high-pressure system (Kowap) (5 units in stock; approx. 2 units available by delivery – 1 filter approx. CHF 20-25) - Coolant cleaning system or oil separator (custom built) - Storage cabinet customized to fit the tool magazine for KM63 holders, numbered for 80 positions - Specific clamping equipment suited for the KM63 holders, allowing direct indexable insert clamping - Iscar disc milling cutter suitable for a D160 mm holder, 4 mm width - Gear milling cutter suitable for a holder (custom built – for soft jaws, pitch = 1.5 mm) - Cleaning/deburring brush suitable for a holder We are also happy to provide leasing and financing offers for the machine. A viewing appointment can be arranged upon request.

Condition: used, total height: 1,700 mm, total length: 3,200 mm, total width: 1,800 mm, Empty weight: 3.000 kg Price: On request - Documentation available: No - Control: Conventional - Motor power: 7.5kW - Center distance: 1000mm - Model: inderslijper intern & extern - Travel X: 1100mm - Center height: 180mm - Grinding diameter: 350mm - Table length: 2000mm - Max. spindle speed: 1500rpm - Table width: 180mm - Transport dimensions: 3200mm x 1800mm x 1700mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Knodpowrb Nwefx Afijc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2015, Technical details: turning diameter: 410 mm turning length: 500 mm control: 840 turning speed range - drive spindle: 5000 U/min spindle bore: 65 mm total power requirement: 65 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 3,67 x 2,10 x 1,91 m CNC lathe, without tailstock, prepared for robot-handling, autom. door, C-axis, chip conveyer filtermist flush gun internal cooling system 600 l , 20 bar , paperfilter driven tools on all stations hollow clamping unit, Kjdpovtzu Defx Afijnc Ethernet, inkl. collet chuck Hainbuch inkl. 3-jaw chuck D = 250 / 65 inkl. 10 pcs. static toolholder, approx. 27.100 h "machine on", approx. 11.400 h "spindle on" machine in very good condition, under power in our showroom *

Condition: used, mileage: 235,000 km, Year of construction: 2016, Serial number: WDB9630031010xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21579 Specifications: Mileage: 235,000 km Transmission: Automatic Full air suspension Euro 6, 320 hp Engine brake 4x2 15-pallet box Full side opening Internal height: 2.68 m Internal width: 2.48 m Internal length: 7.87 m Tail lift with remote control Decent tires On Spot traction system Toolbox Cooling/freezing unit Reversing camera Webasto heater 2 x side doors Radio/CD Climate control / AC Serviced at local workshop Ready for delivery Knjdjxp Alfepfx Afijc Description:Mercedes Antos box truck from 2016.Equipped with a 15-pallet box with full side opening and a cooling/freezing unit.Lightly used over the past 2 years. Serviced at a local workshop.Ready for delivery. Km: 235000 HK: 319 Technical approved: Yes EU-approved until: 28.03.2026 Own weight: 12282 Total Weight: 19000 Payload: 6643 Width: 260 Length: 1030 Euro: 6 Model: Antos 1832 m/ Full sideåpning og Kjøl/frys. Gearbox: Automatic Number of pallets: 15

Condition: used, Electric paint booth, good condition Internal dimensions: 4300 x 1900 x 2200 mm Kodpov Tm N Tefx Afienc Currently disconnected, ready for transport. If you have any more questions, we will be happy to answer.

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm Knodpjvuugiefx Afisc number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, workpiece weight (max.): 200 kg, table width: 500 mm, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, For sale: HAAS UMC-500 5-Axis Universal Machining Center Condition: Absolutely brand new machine. Only one part was produced for test machining. The equipment has been unused and stored for 2 years. Ksdjxg Nd Nopfx Afionc Main technical specifications Travel: X-axis: 610 mm Y-axis: 406 mm Z-axis: 406 mm Table: Diameter: 500 mm Maximum workpiece weight: 200 kg 5-axis rotary/trunnion table (trunnion type) Spindle: Inline direct-drive 10,000 rpm 30 HP (22.4 kW) CAT 40 taper (40T) Through-spindle coolant: 300 psi (21 bar) Tool changer: 30 tool positions Side-mount, high speed Precision and compensation: Temperature compensation DWO/TCPC – Dynamic Work Offset and Tool Center Point Control Rigid Tapping Equipment and features: Haas NGC CNC control (FANUC compatible) 1 GB memory Ethernet connection, WiFi connectivity USB port, color 15” LCD display Early power-failure detection module Memory lock (keyswitch) Spindle coolant system Protective enclosure with doors Internal lighting Centralized lubrication system Top cover Measurement and calibration equipment: Renishaw WIPS wireless intuitive probing system (Haas Visual Programming System, macros, spindle orientation, coordinate rotation and scaling) Rotary-Axis calibration tool RJH remote jog handle with color display Chip and coolant systems: Coolant tank – 95 gallons (360 L) Initial fill with Blaser coolant emulsion Chip conveyor (belt type – CONVEYOR-H) High-pressure air system Documentation: Original machine documentation (in English) Application Haas UMC-500 is a compact yet powerful universal 5-axis machining center designed for the production of complex, multi-sided, and free-form surface parts. Suitable for simultaneous 5-axis machining as well as 3+2 machining, significantly reducing setup operations and ensuring high accuracy. If you have further questions, we are happy to assist.

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm feed length 0 - 500 mm power requirement 10,0 kW Knsdpsvuudujfx Afijc weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Condition: used, Year of construction: 1984, material width 300 mm coil weight 0,5 t material thickness 0,4 - 3,0 mm coil internal diameter 420 - 520 mm coil external diameter 1200 mm no. of straightening rolls 9 straightening roll diameter 50 mm number of draw-in rolls 2 diameter of draw-in rolls 50 mm Knjdpfx Afjvuk Icoisc power requirement 1,5 kW weight 1,55 t dimensions (WxDxH) 2,5 x 1,2 x 1,8 m Straightening machine with infinitely variable drive, supporting rolls, 2-point-adjustment of the straightening rolls Decoiler not driven, with pneumatic lag break, manual centralized expansion

Condition: used, Year of construction: 2004, material width 250 mm Kodpfx Aovut Ulofienc coil weight 2 x 3,0 t material thickness 1,5 - 6,0 mm coil internal diameter 470 - 530 mm coil external diameter 1800 mm material cross-cut 6,0 bei BB100 / 3,8mm bei mm² no. of straightening rolls 21 straightening roll diameter 30 mm number of draw-in rolls 4 speed - 20 m/min power requirement 18,0 kW Weight 4,2 t Dimensions (WxDxH) 2,4 x 2,7 x 2,6 m Weight 2,40 kg dimensions (WxDxH) 2,0 x 2,1 x 2,2 m Decoiler AH 3000/2/250/ST with infinitely variable drive, hydraulic centralized expansion, hydraulic snubber roll, hydraulic pivoting Straightening machine RM 3025.4/21 with infinitely variable drive, driven straightening rolls, manual adjustment of the roller cassette, rapid changing device of the straightening rolls coil loop control via ultrasonic

Condition: used, Year of construction: 2001, material width 410 mm coil weight 2,0 t coil internal diameter 380 - 520 mm coil external diameter 1400 mm power requirement 2,2 + 1,1 kW weight of decoiler 0,7 t dimensions decoiler (WxDxH) 1,4 x 1,4 x 1,65 mm Knodpfjvut Thjx Afioc weight of the pulling device 1,15 t required space of the pulling device (WxDxH) 1,7 x 1,1 x 2,2 m Decoiler 2370 DFPS without drive, with pneumatic lag brake, hydraulic centralized expansion, pneumatic snubber roll pulling device / hydraulic threading device 235 D with infinitely variable drive, coild loop control via ultrasonic material thickness up to approx. 6,0 mm roll diameter approx. 160 mm

Condition: used, Year of construction: 2000, material width 600 mm coil weight 5,0 t material thickness 0,5 - 5,0 mm coil internal diameter 360 - 660 mm coil external diameter 1500 mm no. of straightening rolls 9 straightening roll diameter 80 mm number of draw-in rolls 2 material cross-cut 1500 mm² material thickness at 600 mm material width 2,5 mm material thickness at 300 mm material width 5,0 mm power requirement 15,0 kW weight of the feeder-straightener 2,5 t weight of the decoiler 1,6 t dimensions of the feeder-straightener 1,7 x 1,7 x 2,6 m dimensions of the decoiler 1,8 x 2,0 x 2,3 m Feeder-straightening machine VCRL 650, yom 1994, General overhaul 2001 with infinitely variable drive, motoric height adjustment, hydraulic alligator opening, pneumatic intermittent lifting Decoiler SM 5000, yom 2000 with auxiliary drive, hydraulic expansion, hydraulic snubber roll. loop control via contact plate Knjdovut S Repfx Afisc as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1994, material width 650 mm coil weight 3,5 t material thickness 0,8 - 3,0 mm no. of straightening rolls 7 straightening roll diameter 80 mm number of inlet rolls 4 coil internal diameter 460 - 530 mm coil external diameter 1400 mm weight straightener 1,0 t Knjdpfxjvut Sdo Afiec weight decoiler 0,9 t dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4 with infinitely variable drive Decoiler DREHER 2380 FM-FPS Modell 891/5 motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll coil loop control Ultrasonic

Condition: used, Year of construction: 1996, material width 500 mm coil weight 2,5 t material thickness 0,2 - 3,0 mm coil internal diameter 480 - 530 mm coil external diameter 1300 mm material cross-cut 1000 mm² no. of straightening rolls 10 straightening roll diameter 80 mm number of draw-in rolls 2 roll diameter 120 mm speed 20 m/min power requirement 4,0 + 1,1 kW weight of straightening machine 2,3 t dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm weight of decoiler 0,95 t dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm Straightening machine BRMS 4/500/10 with infinitely variable drive Decoiler BSH 3-500 with main motor for fix speed, ausiliary drive (declutchable), pneumatic snubber roll Knodovut Raepfx Afijc coil loop control via light guard can be offered without putting into operation or with putting into operation in given condition video at seller's site before dismantling available

Condition: used, Year of construction: 1969, material width 100 mm coil weight 0,1 t coil internal diameter 190 - 800 mm coil external diameter 900 mm weight 0,1 t dimensions (WxDxH) 0,65 x 0,9 x 1,4 m motoric driven, with manual expansion, coil loop control Knsdpfxevzxnqo Afijc can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1985, material width 500 mm coil weight 1,0 t material thickness 0,4 - 5,0 mm coil internal diameter 420 - 520 mm coil external diameter 1200 mm material cross-cut 1500 mm² no. of straightening rolls 9 number of draw-in rolls 2 speed 0 - 80 m/min Knjdpsvut Hzjfx Afioc Weight 1,70 t Dimensions (WxDxH) 2,7 x 1,3 x 1,9 m Weight 1,35 t dimensions 2,2 x 1,2 x 2,0 m Straightening machine with infinitely variable drive, intermediate lifting of the inlet rolls, hydraulic threading wedge Decoiler with auxiliary drive, hydraulic centralized expansion, snubber roll

Condition: used, Year of construction: 1994, material width 500 mm coil weight 3,0 t material thickness 0,2 - 2,5 mm coil internal diameter 470 - 530 mm coil external diameter 1400 mm no. of straightening rolls 9 straightening roll diameter 40 mm number of inlet and outlet rolls 4 material cross-cut 1200 mm² speed 1,5 - 30 m/min dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m weight decoiler 1,1 t dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m weight straightener 3,0 t - Straightening machine RYD 40 x 500 with infinitely variable drive (driven lower straightening rolls), straightening rolls individually adjustable by motor, supporting rolls, outlet roller basket Knjdpfxovut Eqo Afioc - Decoiler DY 500 x 3000 with hydraulic auxiliary drive, pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, hydraulic insertion aid, hydraulic coil lifting device - coil loop control can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1971, material width 300 mm coil weight 2,0 t Knodpfxovut Dtj Afijc material thickness 1,0 - 5,0 mm coil internal diameter 440 - 520 mm coil external diameter 1320 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 70 mm power requirement 1,1 kW weight of decoiler 2,0 t dimensions decoiler (WxDxH) 2,0 x 2,0 x 1,7 mm weight of straightening machine 1,3 t dimensions straightener (WxDxH) 2,7 x 1,3 x 2,4 mm Straightening machine RM-S 300 with infinitely variable drive, pneumatic intermittent lifting, hydraulic inlet table, bending roll, alligator opening, coil loop control Decoiler H 2 with auxiliary drive, pneumatic snubber roll, hydraulic expansion, manually shiftable as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request