Used International 1486 for sale (8,235)

Condition: ready for operation (used), Vogel SKF piston pump KFG10-5W2-S1-486 grease/NLG12, max. 90-264 VAC 47-440Hz, 120-370 VDC, serial number: filled! - used, in good condition, 100% functional, delivery as per photos. Isdpfxjx Evbho Ah Neal

Condition: ready for operation (used), Bosch UVF 160M / 4B-21S /527 / 55432-1 servo motor / 1070914867, professionally completely overhauled and tested with a 12 month warranty, 100% functional, scope of delivery as per photos, The agreed sales discounts do not apply to this article. Please enquire about price separately! ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iodpfxok Ru Dco Ah Nsal

Condition: ready for operation (used), Bosch UVF 160M / 4B-21S / 202 / 3531139-6 servo motor, 1070914867, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, The agreed sales discounts do not apply to this article. Please enquire about price separately! ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Isdpfx Ahok Ru A Uj Neal

Condition: ready for operation (used), Bosch UFV 160M / 4B-21S / 739 / 342776-1 servo motor UVF 160M / 4B-21S / 739 / 342776-1 / 107-914867, professionally completely overhauled and tested with a 12 month warranty, 100% functional, scope of delivery as per photos, The agreed sales discounts do not apply to this article. Please enquire about price separately!, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iasdoi D Hg Aopfx Ah Nel

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, load capacity: 2,500 kg, throat depth: 2,500 mm, empty load weight: 713 kg, construction height: 3,350 mm, pivoting range: 360 °, Column Slewing Crane M25-2.5 TECHNICAL DETAILS Load capacity: 2,500 kg Jib outreach: 2,500 mm Height: 3,350 mm Slewing range: 360° Outreach: 2,500 mm Underside of jib: 2,980 mm Overall height: 3,350 mm Bolt circle diameter: 530 mm Flange outside diameter: 610 mm Beam flange width: 150 mm Minimum approach dimension (Aa): 420 mm Internal approach dimension (Ai): 820 mm Support column length: 1,530 mm MACHINE DETAILS Weight: 713 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 48 V EQUIPMENT Electric travel trolley Electric chain hoist Lifting capacity: 2,500 kg Lifting height: 4 m Lifting speed: 4 / 0.7 m/min Crane trolley Motorized travel trolley Flange width range: 138–195 mm Flange width: 150 mm Travel speed (max.): 10 m/min Travel speed (min.): 3 m/min MACHINE DETAILS Travel motor (trolley) Power: 0.3 kW Rated current: 1.2 A Starting current: 4.2 A Hoist Hoist motor power: 3.6 kW Hoist motor rated current: 8.2 / 4.3 A Iajdpfx Ahox Nvtlj Nsl Hoist motor starting current: 39 / 6.7 A Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 48 V

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller model: OSP-P200M, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 460 mm Travel Z-axis: 460 mm Spindle speed range: 50 - 15,000 rpm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 32 m/min Tool magazine: 32 positions MACHINE DETAILS Control: OSP-P200M Main drive motor: 22 kW Dimensions & Weight Required space (L x W x H): 2,850 x 2,810 x 2,750 mm Machine weight: 7,200 kg Iaedpfx Ahjx I Ecye Njl EQUIPMENT Chip conveyor Internal coolant supply Standard filtration unit

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 607 mm, travel distance Z-axis: 286 mm, controller model: Fanuc 32i A, grinding spindle speed: 30,000 rpm, The offer includes a CNC hard turning lathe with FMB automation! Iedpfex I A Hpox Ah Njal The machine is from year of manufacture 2013, but it was only commissioned in 2017 (showroom machine)! HARDINGE GT27SP GG-134HS TECHNICAL DETAILS X-axis travel: 607 mm Z-axis travel: 286 mm Max. spindle speed: 6,000 rpm Number of axes: 2 MACHINE DETAILS Control: Fanuc 32i A Dimensions & Weight Machine dimensions with robot cell (L x W x H): 4,600 x 1,600 x 2,700 mm Weight: approx. 2,100 kg Operating hours: 34,536 h EQUIPMENT MARPOSS measuring system MicroCentric 4-410-3-QC chuck Jäger HF spindle (spindle speed: 30,000 rpm) Oil mist filter S400 Spindle cooling possible FMB Unirobot LR Mate (Serial number: E-83200 (robot) / E15X36204 (controller), year of manufacture: 2015) Robot model: FANUC LR MATE 200iD7L-P2TB Controller: FANUC R30iB Max. part feed: 70 mm Axes: 6 Robot cell weight: approx. 1,000 kg GENERAL EQUIPMENT Knoll filter system KF110/500 (capacity: 500 l) Grinding spindle holder Grinding wheel arbor RINECK Reversing station in robot cell Feed conveyor for raw/finished parts 2,900 mm 2x MAS-MEX20-GT27-1-S385H adapters 2x MAS-MEX20 turn sleeves 2x MAS-turn rings 2x Hydro-expansion holders for internal turning tools Holder for turning tool + turning tool MARPOSS probe with holder

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,200 h, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,000 rpm, table diameter: 635 mm, TECHNICAL DETAILS Travel X-axis: 1,016 mm Travel Y-axis: 635 mm Travel Z-axis: 635 mm B-axis: 120-35 ° C-axis: 360 ° Spindle: SK 40 Speed: 8,100 rpm Table diameter: 635 mm Tool changer: 30 stations MACHINE DETAILS Number of axes: 5 Operating hours Power-on time: 4,300 h Cycle time: 2,200 h EQUIPMENT Control panel with touchscreen Network interface Wi-Fi connection 1 GB part program memory Power failure detection module Control cabinet with air conditioning unit Wireless measuring system Coolant unit Programmable coolant nozzle Prepared for retrofitting internal coolant supply Iedpfox I Ag Asx Ah Neal Hinged belt chip conveyor

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 7600-101325, load capacity: 340 kg, arm reach: 2,800 mm, pivoting range: 360 °, warranty duration: 4 months, Equipment: documentation/manual, Robot with a 4-month warranty General overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Changing the oils for all six axes. - Battery replacement: All internal batteries were replaced with new batteries. - Mechanical maintenance: Gears and counterweight were inspected and serviced after repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, teach pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in the original color or a custom color upon request. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Control: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 revolutions Dynamics (max. rotation speed per axis) Axis 1: 75°/s Axis 2: 60°/s Axis 3: 60°/s Axis 4: 100°/s Axis 5: 100°/s Axis 6: 160° °/s Position and Path Precision Position Accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization Time (Pst at ±0.4 mm): 0.18 s Path Accuracy (AT): 2.05 mm Path Repeatability (RT): 0.23 mm Iajdex Syivepfx Ah Nel FEATURES - 6-axis industrial robot with a high payload class - Large swivel range on axis 6 with up to 67 revolutions - Precise path guidance with repeatability of less than 0.3 mm - High speed of the wrist axes for fast movements - Perfectly suited for heavy-duty handling and precise motion sequences

Condition: ready for operation (used), Year of construction: 2010, operating hours: 47,512 h, functionality: fully functional, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 850 mm, table load: 6,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,230 mm Travel Y-axis: 1,400 mm Travel Z-axis: 850 mm Table size: 2,000 mm × 1,250 mm Table load capacity: 6,000 kg Spindle speed: 6,000 rpm Spindle drive / Power: 38 kW Tool holder: SK50 Rapid traverse: 12 m/min Number of tool stations: 40 MACHINE DETAILS Control: HEIDENHAIN iTNC 435 Iaedpfx Ahjx Sqrhj Nol Dimensions & Weight Machine dimensions (L × W × H): 6,135 × 4,338 × 4,150 mm Weight: 22,000 kg Operating Hours Spindle hours: 47,512 h Program run time: 48,891 h Power-on hours: 72,846 h EQUIPMENT Coolant system Chip conveyor Internal cooling Electronic handwheel control Automatic tool measurement Workpiece measuring probe Chip flushing

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis HAAS UMC 750SS vertical machining center was manufactured in 2015. It features a spindle speed of 15,000 rpm, a CT 40 cone type, and a tool magazine with 40 + 1 places. Additional features include internal cooling and a chip conveyor. A great opportunity to buy this HAAS UMC 750SS vertical machining center. Contact us for further details regarding this vertical machining center. Extra Information Machine still under power Iasdpfxoyalkms Ah Nsl Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), total length: 5,500 mm, total width: 1,400 mm, total height: 1,000 mm, empty load weight: 600 kg, Buisbuigmachine voor buis: dia 6 48 mm voor volledig materiaal: max 30 mm met gereedschap voor buisdiameter 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm Max dia tube x thickness: Ø 6 > 48 mm (45 kg / mm²) Iaodpfexcqi Eex Ah Nsl Max bendingradius: 180°

Condition: used, New: No Field of application: Freight transport Please contact ATS Norway for more information Please provide reference number upon request: 22162 Specifications: Internal length container 1: approx. 635 cm Internal length container 2: approx. 723 cm Brand new tarpaulins can be included at an additional cost Ready for delivery Iasdpfxoyaga Ns Ah Njl   Own weight: Model: 2x Krokkasser

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Iasdpeyagiksfx Ah Nol Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Table surface: 1600 x 2000 mm Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: used, maximum load weight: 34,270 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2026, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-axle STAS walking floor semi-trailer, full aluminium, 91.5 cbm First registration Internal dimensions (LxWxH): 13,500 x 2,475 x 2,650 / 2,825 mm Axle spacing: 1,310 mm Unladen weight: 7,790 kg Fifth wheel height: 1,150 to 1,180 mm Aluminium chassis JOST axles with large disc brakes, 430 mm, reinforced version WABCO trailer EBS with RSS rollover protection WABCO Smartboard with axle load indicator 1st axle: lift axle 3rd axle: lift axle with WABCO OptiTurn system Aluminium air tanks 6 x 385/65 R 22.5 tyres JOST crank-type landing gear, full-load ASPÖCK full-LED lighting 4 external LED work lights + 1 LED work light in load compartment 2x V2A stainless steel toolboxes Fully welded interior sidewall seams CARGOFLOOR moving floor with 21 boards, 10 mm thick, ribbed Remote control operation Rear closure plate in stainless steel 3 reinforced bow roof supports (waste version) Reinforced roof roll tarp, Panama 900 g 12 pairs of lashing rings in floor Sidewall protective tarpaulin RENTING is the new BUYING – also available immediately from us as full-service rental. Iajdpfexz Nchjx Ah Nol

Condition: used, mileage: 2,480 km, power: 315 kW (428.28 HP), first registration: 01/2026, fuel type: diesel, number of seats: 60, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, +++Voltage Converter+++ Engine: Mercedes Benz, AdBlue Emission Standard: EURO6 Total seats: 60 Seating configuration: 57+2+1 sleeper seats with lap belts Transmission: Automatic General * 8-speed PowerShift * Secondary water retarder, manufacturer: Voith * Trailing axle with active steering * Hill start assist * Starter batteries * Inverter 2,300 W * Fuel consumption display * Color: pure white (RAL 9010) Safety * ABS (Anti-lock Braking System) * ASR (Traction Control) * ESP (Electronic Stability Program) * Active Brake Assist (ABA 6) * Adaptive cruise control (ART) * Additional stop-and-go function for ART * Lane departure warning system * Sideguard Assist * Traffic sign recognition assistant * Frontguard Assist * Attention assist * Immobilizer * Engine compartment fire extinguishing system * Tire pressure monitoring system * Reversing camera * Video surveillance at middle entry * Additional wiper on upper windshield Passenger Compartment * Travel Star Eco sleeper seats * Luxline upholstery * Leather headrest inserts * Side-adjustable seats * Footrests * Folding tables * Seat back nets * Crank armrests * Reading lamps * Automatic climate control * Driver’s area air conditioning * Nozzle ventilation * Heated windshield * Convector heating for passenger compartment * Tinted double glazing * Glass roof hatches * Toilet (WC) * Galley * Coffee machine * Cooler box * Waste disposal unit * Safe * Curtains * Synthetic floor mats * Wood-effect floor * Luggage racks Exterior * Lifting and lowering system * Kneeling function * Bus stop brake with start inhibit * Luggage compartment flaps as lift-up doors * Central locking for luggage compartments * Detachable tow bar * Ski rack mount * Electrically heated and adjustable exterior mirrors * LED headlights (low and high beam) Audio, Communication, Electronics * Navigation system * Driver’s microphone * Tour guide microphone * CD player * DVD player * COACH infotainment system * 2x flat screens * HDMI socket * Tour guide call system Iaodpfx Aswciimeh Nel * Hands-free system for mobile phone * Double USB charging socket * 29x power sockets per double seat in side wall Miscellaneous * German registration certificate * Twin tires * Vehicle dimensions: Length 13.93 m, Width 2.55 m, Height 3.68 m * Aluminum wheels * Tires: front axle approx. 90%, middle axle approx. 90%, rear axle approx. 90% Our internal vehicle number: 11509 Subject to errors. Images and description may differ from the actual vehicle. Over 300 vehicles constantly in stock.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, controller manufacturer: FANUC, controller model: 310is-WA, number of axes: 5, This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information. Additional equipment Isdpsyali Aofx Ah Noal • Includes all accessories in the photos • Includes digital documentation Machine Benefits Technical Machine Benefits • Internal dimensions of the work tank: 1100 x 800 mm • Wire diameter: 0. 1 mm to 0. 3 mm (0. 25 mm present on the machine) • Wire spool capacity: up to 16 kg • Automatic wire cutting and feeding Extra Information Machine still under power

Condition: ready for operation (used), 6-kolomspers met 4 hydraulische zuigers opwaartse slag diameter van de zuiger: 450 mm slag: 550 mm Maximale kracht van 2000 ton max opening zonder verwarmde tafels: 780 mm max opening met verwarmde tafels: 655 mm Verwarmde tafels met stoom of olie Maximale temperatuur: 300° C Totale oppervlakte: 2000 x 2000 mm Twee tafels van 2000 x 1000 mm (kunnen samen of apart gebruikt worden) 2x 11 kW hydraulisch vermogen met invoerroltafel: 4260 x 1550 x 1250 mm Olietank op platform: 2000 x 2000 x 2500 mm Totale hoogte van de pers: 3600 mm Iodpfxjv Rwftj Ah Njal De pers zit 920 mm in de grond Werkhoogte is 750 mm Toepassingen: - composietmateriaal - vulkaniseren - buigen / strekken

Condition: ready for operation (used), Year of construction: 2015, total height: 2,100 mm, overall weight: 8,600 kg, controller manufacturer: SIEMENS, controller model: Siemens 828D ShopTurn Touchscreen Control, number of axes: 2, This XYZ XL780 was manufactured in 2015. A robust horizontal turning machine featuring a Siemens 828D ShopTurn control, it offers a swing over bed of 780mm and a maximum cutting length of 2,900mm. The spindle supports a 160mm diameter with speeds up to 1300 rpm. Includes a 3-jaw manual chuck and multiple steady rests. If you are looking to get high-quality turning capabilities consider the XYZ XL780 machine we have for sale. Contact us for more information. Additional equipment • Various Chuck Sizes depending on Machine • Air Assist ‘Floating’ Tailstock with Towing Hitch • Joystick Control for Rapid Movement • Coolant // Worklight • Automatic Lubrication • Electromagnetic Spindle Brake • Chuck Guard (Interlocked) // Swarf Guard (Interlocked) • Dead Centres and Sleeves • Networking // USB Port • Compact Flash Card Slot Machine Benefits Technical Machine Benefits • Power requirements: 54a • Air requirements: 6 bar • Cross slide travel: 430 mm • Distance between centres: 3000 mm • Swing in gap: 1090 mm • Swing in gap: 1090 mm • Maximum cutting length: 2900 mm • Bed width: 50 mm • Bed width: 50 mm • 4 station auto indexing toolpost Extra Information Accessories 3-jaw manual chuck, Ø 500 (capacity Ø 730) Iajdpfxoyaixue Ah Nel 3 Adjustable Steady Rests (Ø 250, 400, and 540) 2 Sets of Hard Jaws for Internal/External Grip on Plate 1 Set of Hard Jaws for Single-Piece External Grip 4 Sets of Soft Jaws for Plate 1 Cm6 Live Center, Röhm Brand Dimensions Machine Depth 5400 mm

Condition: ready for operation (used), machine for expanding and reducing tubes 3 heads no tooling included (can be supplied on demand) Dimensions: 1500 x 2000 x 2000 mm Iaedpfx Aswrt Tzeh Nsl Weight: 1600 kg

Condition: ready for operation (used), Year of construction: 2000, total height: 2,050 mm, overall weight: 4,000 kg, controller manufacturer: INDEX, controller model: C200-4 / C200-8, This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information. Additional equipment • Synchronous device for counter spindle machining • Tool carrier 3 for synchronous spindle (rear end machining) • Additional milling spindle • Thread milling and polygon turning device • Gripperless tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 Machine Benefits Technical Machine Benefits • Space requirement (without material guide): 3580 x 3108 mm • Control unit: resolution: 0. 001 mm (input/output/correction) • Comprehensive movement range with multiple axes configuration • High precision with 0. 001 mm resolution in numerical control • Versatile expansion stages and additional equipment for enhanced functionality Extra Information Movement Cross slide 1 (top) - XYZB axes: X-axis: Slide path 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Slide travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Slide path 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotating): 360° swivel range, angular steps 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross slide 2 (bottom) - XZ axes: X-axis: Slide travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Slide path 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Turret right: X-axis: Slide path 120 mm Z-axis: Slide travel 400 mm Tail Stock Center distance: 400 mm Pressure force (max): 5500 N Isdpsyailzofx Ah Nsal Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Delivery rate: 18 l/min System pressure: 90 bar Filling capacity: 70 liters Cooling lubricant system: Pump capacity (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Filling quantity: Approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Counter spindle: D140 external mount (only tensile clamping permitted for collet and chuck clamping) 1st spindle data (main/counter spindle): Spindle clearance (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle Ø in front bearing: 75 mm (with 30 mm clearance) / 85 mm (42 mm) / 100 mm (60+65 mm) Speed (max): 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Chip diameter (workpiece Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm

Condition: ready for operation (used), machine for expanding and reducing tubes 1 head no tooling included (can be supplied on demand) Stroke: 150 mm Power: 11 kW Iajdpfxjwrt Tuo Ah Nel Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg

Condition: ready for operation (used), machine for expanding and reducing tubes Iaedpfxewrt Tno Ah Njl 2 heads

Condition: ready for operation (used), controller manufacturer: Fanuc OM, total height: 3,240 mm, total length: 4,100 mm, total width: 6,850 mm, empty load weight: 18,000 kg, additional equipment features: yes, Type: ACE-H80 X-axes: 1250 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: 800 x 800 mm Max weight on the table: 2000 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 25 kW Number of axes: 4 axes: X,Y,Z,B Toolstore: yes Tools: 90 positions Frequency: 20 -> 4500 rpm Number of pallets: 2x Power principal motor: 70 kva Iaedpfxowttrmj Ah Nel Cooling-system: yes

Condition: ready for operation (used), empty load weight: 1,000 kg, cap: 50 x 2 x 2,5 mm length: 6000 mm Iaedpsyac U Nefx Ah Nsl