Used Internal Grinding Device for sale (22,030)

Condition: good (used), 1 used surface grinding machine Manufacturer: Jung Model: HF 50 Technical specifications: - Z-axis travel: 400mm Iisdpsxgbb Tsfx Aquec - X-axis travel: 500mm - Y-axis travel: 200mm - Table length: 720mm - Maximum spindle speed: 4000rpm - Table width: 200mm - Minimum spindle speed: 1000rpm - Transport dimensions: 2300mm x 1500mm x 1700mm (L x W x H) - Transport weight: 2000kg Equipped with: - Digital readout - Diaform device

Year of construction: 1968, condition: good (used), 1 used thread whirling machine for lathes make Burgsmüller type L 2 Iisdjpit Afspfx Aquoc serial number 68/1724

Year of construction: 1973, condition: good (used), 1 used spline shaft grinding machine make Fritz Werner type FKR 16 year 73 No. 5275/8012 technical data center height 185 mm Iiodpfx Aon Atchoquoc max.grinding length1600 mm passage diameter 55 mm pitches 4-32 L 5900 x W 2300 x H 2000 mm weight 7 to

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, grinding length: 4,000 mm, grinding width: 500 mm, spindle speed (max.): 1,400 rpm, overall weight: 11,000 kg, TECHNICAL DETAILS Max. grinding length: 4,000 mm Max. grinding width: 500 mm Max. distance between table and spindle center: 900 mm Table speed: 3 - 25 m/min Spindle speed: 1,400 rpm Grinding spindle motor: 11 kW MACHINE DETAILS Weight: approx. 11 tons EQUIPMENT Iiedpfezd Rqlsx Aquec Including complete electrical system Permanent magnet table Cast iron bed (overhauled in 2011) New hydraulics and digital Z-axis Swiveling spindle

Condition: used, Used crane runway system with vacuum handling Year of manufacture: 2017 Load capacity: 250 kg (at lifting device) Crane runway: 6 m Bridge: 6 m Vacuum lifter B 3 UW H K 250 V with 2 oval suction plates 500 x 2500 mm Vacuum generation: pneumatic with ejector Operating pressure: 7 bar, filtered compressed air required Air consumption: approx. 7 NL/sec. with ABM electric chain hoist Lifting speed: 0...10 m/min, infinitely adjustable Iedpfxezc Agdj Aquoic Operation via special handle on the vacuum lifter. Lifting movement is infinitely variable by frequency converter Availability: by arrangement Storage location: Hesse

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Type PSG 63 – UAN Year of manufacture: 1988 Grinding length: 600 mm Grinding width: 320 mm Max. workpiece height: 500 mm Table travel (longitudinal): 750 mm Table travel (cross): 340 mm Grinding wheel diameter: 350 mm Grinding wheel width: 40 mm Spindle speed: 1500 rpm Rapid vertical feed: 400 mm/min Power: 3.7 kW Isdpfozd N N Tox Aqusic Automatic feed Magnetic chuck Coolant system Weight: 2500 kg Price: EUR 2,000—plus VAT, ex location

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Guiding roller width: 30 mm Guiding roller diameter: 30 mm Iiodszczvdepfx Aquoc Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Space required L x W x H: 250 x 100 x 150 mm Weight: 5 kg Good condition

Condition: used, Year of construction: 1988, turning speed range 0 - 1.500 U/min curb weight 240 kg engine output 1,7 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. The offer consists of: Iedpfx Aezczh Hoqujic 1x Vibratory finishing system, CN 150, year of manufacture 1988 1x Trowalpur wastewater treatment system RT 02-SK, year of manufacture 1997 Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Year of construction: 2018, liter capacity 200 l Ijdpfxszczkze Aqujic feed pressure max. 200 bar coolant capacity 950 l Control Siemens total power requirement 45 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,4 x 1,5 x 2,9 m

Condition: good (used), Year of construction: 1998, working area 3 - 50 mm lip angle 40-180 ° drill diameter 3-50 mm weight of the machine ca. 0,18 t dimensions of the machine ca. LBH 0.9 x 1,0 x 1,40 m Incl. workpiece head for switchable 1:1 / 1:2 ratio Incl. special web-thinning attachment for split-point grinding Incl. 6-jaw chuck Incl. work light Iisdszczhgopfx Aquec Incl. operating manual

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, CNC Precision Surface and Profile Grinding Machine This machine is ideally suited for precision applications in tool and mold making. Technical Details: Grinding surface: 800 x 450 mm Grinding area: 800 x 400 x 375 mm Table load (max.): 700 kg X-axis = Longitudinal movement of worktable Table longitudinal stroke: 20 - 850 mm Table drive: Electromechanical with toothed belt drive Table speed: 5 - 35,000 mm/min Table setup: Electric handwheel and direction push button Y-axis = Vertical movement Distance from table to spindle center: 140 - 525 mm Vertical drive: Electromechanical with ball screw Vertical speed: 50 - 2,000 mm/min Vertical adjustment via electric handwheel and direction pushbuttons Minimum infeed 0.001 mm Measuring system: glass scale Z-axis = Transverse movement Maximum transverse travel 400 mm Drive type: electromechanical with ball screw Transverse speed 50 - 2000 mm/min Transverse travel adjustment via electric handwheel and direction pushbuttons Measuring system: glass scale C-axis = Grinding spindle Grinding spindle motor 7 kW Grinding spindle speed 1400 rpm Grinding wheel standard 300 x 50 x 76.2 mm Spindle bearing: Precision roller bearing Lubrication: Lifetime lubrication Connected load: approx. 19 kVA Total weight: 3500 kg Equipment: - Electro-permanent magnetic chuck Clamping surface 800 x 400 mm, Pole spacing 18 mm, with 16-stage holding force control and automatic Iiedpfjzcyyhox Aqujc Magnetic pole reversal for demagnetization - Leveling blocks For setting up and leveling the machine - Grinding wheels and two flanges - Partial enclosure Open at the top for loading with a sliding door - Dressing system Consisting of a holder for a prism arm or fork dresser Practicle arm for single-point diamond (MK O) or shaped diamond - Grinding spindle speed control Peripheral speed 10-32 m/s The peripheral speed of the grinding wheel is kept constant (V-constant control) with a 7 kW grinding spindle motor - Universal paper belt filter unit UPF 100 Tank capacity approx. 280 liters, Pump capacity 20 liters/minute at 1.5 bar - Air purifier Flow rate approx. 1000 m³/h - Compressed air ports For easier removal of large workpieces with a manual compressed air valve in the machine's work area. - Mobile balancing unit With optical operator guidance for dynamic balancing of the grinding wheel directly in the machine. Imbalance size and position are calculated automatically. With transport case. - Cleaning set Hand-held impulse nozzle for cleaning the work area - Documentation/Manual For sale is our reliably operating grinding machine from mold making. The machine was purchased new in 2016 and is in good technical condition, having been used for a maximum of 20 hours per week. It runs perfectly and is being sold solely due to an investment in a larger model.

Condition: used, Year of construction: 2002, Technical details: grinding length: 1500 mm Isdpfx Aqoq Sbh Uoujic grinding width: 700 mm workpiece height: 580 mm table load capacity: 2380 kp table speed -stepless-: 5 - 35 m/min grinding wheel dia. x width: 500 x 100 x 203 mm grinding wheel motor: 18 kW speeds:: stufenlos elektronisch total power requirement: 35 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 5,3 x 2,9 x 3,8 (3,18) m surface grinding machine, paper-filter, DRO 3 axis, automatic infeed, dwheel, full cabin *

Condition: used, Year of construction: 2021, functionality: fully functional, grinding length: 6,000 mm, grinding width: 800 mm, total height: 800 mm, Technical specifications: • Application: Surface grinding and profile grinding • Grinding area: 6000 x 800 x 800 mm • Grinding wheel: 500 x 100 x 203.20 mm • Spindle power: 43 kW • Connected load: 89 kW • Operating hours: approx. 4,400 machine operating hours / approx. 1,600 spindle operating hours • Year of manufacture: 2021 The machine is currently fully functional and can be inspected at the supplier’s premises by appointment. Price is quoted ex works in Lower Saxony; the machine will be prepared/packaged for transport. The machine can be taken over immediately. Equipment: • CAM profile grinding software “WinWop” • Diamond roll dressing unit with 160 mm diamond wheel Ijdpfx Aezcyccsqujic • Coolant recirculation system • Grinding mist extraction system • Automatic balancing • Spark detection system • Belt filter system with magnetic separator • VPN connection for remote diagnostics/remote maintenance

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 76900 € 1453.41 € 1015 mm 610 mm 1.000 x 400 mm 400 x 1.000 mm 1050 mm 5 - 25 m/min 0 - 2.250 mm/min mm 450 mm 480 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 1.800 1/min 3.75 kW 1.5 kW 1.1 kW 1.1 kW 4280 mm 2080 mm 2100 mm 3500 kg 220 kg 440 kg 355 x 50 x 127 mm mm 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Iijdpfjwiqyasx Aquoc Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH * The exact configuration of the dresser must be clarified before ordering

Condition: new, The Cowley 150x2000 mm belt sander is a professional machine designed for sanding, smoothing, and polishing metal, wood, and plastic workpieces. Thanks to its powerful 4 kW motor and high belt speed, this sander ensures fast, precise, and efficient processing, even of large-sized workpieces. Its robust construction and reliable operation make it ideal for intensive industrial use as well as professional workshops. Features: Suitable for sanding and polishing metal, wooden, and plastic workpieces. Powerful 4 kW motor ensures continuous and efficient operation. High belt speed – 29 m/s for fast and smooth surface processing. Strong and stable construction designed for long-term and intensive use. Perfectly suited for professional workshops and industrial applications. Technical Specifications: Power supply: 400V / 50Hz Motor power: 4 kW Belt speed: 29 m/s Belt dimensions (width × length): 150 × 2000 mm Noise level: 87 dB Product Dimensions: Iiodpfozd E S Rjx Aqusc Length: 700 mm Width: 530 mm Height: 1130 mm Weight: 90.0 kg Packaging Dimensions: Length: 850 mm Width: 550 mm Height: 1060 mm Weight: 103.0 kg

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, paper weight (min.): 40 g/m², paper weight (max.): 300 g/m², Hunkeler RW 6 TECHNICAL DETAILS Paper weight, standard: 40–300 g/m² Roll width: min. 165 mm Roll width: max. 520.7 mm Roll diameter: max. 1,370 mm Edge trim width: 8–40 mm Roll weight: max. 800 kg Speed: 10–100 m/min Note on speed: > 150 m/min from min. 200 mm roll diameter MACHINE DETAILS Nominal current: 7 A Active power: 1.1 kW Apparent power: 1.5 kVA Ambient temperature: 10 °C to 32 °C Relative humidity: 15 % to 85 % Optimal ambient temperature according to paper specification: 18 °C to 24 °C Optimal relative humidity according to paper specification: 40 % to 60 % Weight: 694 kg Hunkeler UW 6 TECHNICAL DETAILS Paper weight: 40–300 g/m² Roll width: min. 165 mm Roll width: max. 521 mm Roll diameter: max. 1,370 mm Roll weight: max. 800 kg Speed: 10–100 m/min Nominal current: 4 A Active power: 720 W Apparent power: 950 VA Ijdpfx Aqjyzppdjusic Ambient temperature: 10 °C to 32 °C Relative humidity: 15 % to 85 % Optimal ambient temperature according to paper specification: 18 °C to 24 °C Optimal relative humidity according to paper specification: 40 % to 60 % Weight: 648 kg Hunkeler RW 6 Vacuum Buffer TECHNICAL DETAILS Paper web width: min. 165 mm Paper web width: max. 521 mm Paper weight: 50–180 g/m² MACHINE DETAILS Ambient temperature: 10 °C to 32 °C Relative humidity: 15 % to 85 % Optimal ambient temperature according to paper specification: 18 °C to 24 °C Optimal relative humidity according to paper specification: 40 % to 60 % GENERAL EQUIPMENT Prepared for online operation with roll printer OCE Variostream 8650.

Condition: new, JAINNHER Universal cylindrical grinding machine (SHU-321M / ШУ-321М) For sale is a JAINNHER SHU-321M / ШУ-321М universal cylindrical grinding machine. NEW condition . Surplus Inventory. Quantity discount available. If you are interested, please do not hesitate to contact us! APPLICATION Designed for precision grinding of external, end, conical and internal surfaces of high-precision cylindrical and cone-shaped parts. SPECIFICATIONS: Workpiece diameter Ø 0.025 – Ø 350 mm Distance between centers 750 mm Max. part weight (kg) Centers, 80 / In cartridge, 20 Wheelhead and feed Angle of rotation Deg. ± 15° Standard grinding wheel dimensions: OD x Width x ID, 405 x 32-50 x 152.4 mm Spindle speed rpm 1650/1850/2100 Longitudinal travel length 250 mm Feed handle One turn (diameter) 2 One division (diameter) 5 microns Headstock Spindle rotation Live/stationary center Angle of rotation Towards the operator 30°/From operator 90° Spindle speed rpm 6 speeds 50Hz: 50, 75, 100, 150, 200, 250 Central taper MK No. 4 / Quill taper MK No. 4 Through hole diameter mm 25/Tailstock Quill diameter mm 32 Table Rotation angle toward/away from operator 4°/9° Working distance One revolution 12.5 Feed mm/min. 50-4000 Attachment for internal spindle speed 20 000 rpm. Drive Drive KW (hp) 0.75 (1)/Headstock spindle KW (hp) 3.7 (5) Headstock spindle KW (hp) 0.4 (1/2) Spindle Lubricant Pump KW (hp) 0.1 (1/8)/Coolant pump kW (hp) 0.2 (1/4) Tank capacity Wheelhead spindle grease tank l (gallons) 24 (6) Hydraulic tank l (gallons) 60 (15)/Coolant tank l (gallons) 80 (20) DIMENSIONS: 3560 x 1520 x 1650 mm Net weight Approx. 2300 Kg Included equipment and accessories: Grinding wheels Wear parts kit (for 5000 hours of operation) Spare belts Set of fitter's and assembly tools (Box with tools) Diamond for dressing grinding wheels Spindle for internal grinding Set of mandrels for internal grinding. Adapter flange for 3-jaw chuck 3-jaw chuck ø200 mm. Iijdpfxjhwmhgj Aqusc Full list available after request for more information.

Condition: used, functionality: fully functional, machine/vehicle number: 36/060401177, Fully functional and in good condition. Ijdpfx Aozdz Uzsquoic

Condition: good (used), Min/max width : 20 - 220 mm Iisdpfxozdzk Ao Aqusc Max length : endless Engine size : 4 Kw Configuration : 2 x steel infeed wheels + steel infeed chain. 1 x 1500 mm rollers

Condition: excellent (used), Year of construction: 2010, Cylindrical grinding machine Fab. Robbi Group Typ. Omicron 600 RT5 Year 2010 Technical data Make Robbi Group, IT Type OMICRON 600 RT5 Year of manufacture 2010 table Center width 600 mm Sanding length max. 600 mm Swivel range + 9° / - 5° Center height above table 160 mm Workpiece weight between centers 120 kg Workpiece weight for fly grinding 40 kg Tailstock Quill stroke 25 mm Quill diam. 43 mm Internal mounting cone CM 4 Workpiece headstock Rotation speed 0 - 600 Internal mounting cone CM 4 Spindle passage 26 mm Grinding wheel Diameter 450 mm Width min 20 / max 50 mm Bore 127 mm Equipment - Manual or automatic cycle - Automatic dressing compensation - Simplified presetting of grinding wheel and workpiece All information without guarantee. A demonstration under power is possible at any time in our exhibition hall. Isdewhm Rfepfx Aqujic

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Isdoyw Rhmspfx Aquoic Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, / weight 75 kg Center height: approx. 215mm dimension Length: about 370mm Iodpfxjzcq Hxj Aquoic Width: about 260mm Height: approx. 340mm Chuck diameter: 190mm Lining passage: 60mm Weight: 75kg NEIGHBOR

Condition: used, / weight 140 kg Iisdpfx Aozcq Hlsqujc dimension Length: about 430mm Width: approx. 530mm Height: about 370mm Weight: 140kg

Condition: excellent (used), workpiece diameter 30 - 325 mm grinding depth 60 mm clamping length 1000 mm center hole 1 - 30 mm Iiedpfszcq Rqjx Aqujc weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 1,7 m dressing unit, counter steady, grinding stones

Condition: excellent (used), Year of construction: 1998, Grinding area: 600 x 500 mm Maximum grinding height: 523 mm Grinding wheel dimensions: max. 355 x 38 mm Bore: 127 mm Speed: 1,500 rpm Maximum table load: 700 kg Machine weight: 3,500 kg Includes documentation. Includes various grinding wheels. Iisdpjzcp R Nefx Aqujc