Used Internal Grinding Device for sale (22,518)

Condition: excellent (used), Control SIEMENS 840D Gsdpfx Asyrhl Rjhvjip

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 280 h, load capacity: 1,500 kg, lifting height: 6,600 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Special equipment Load centre: 600 Mast type: Triplex Condition: As new Technical condition: Very good Description: Machine fully workshop-checked, cleaned, UVV and inspection newly carried out! Gisdpfx Ajyty E Eehvjp

Year of construction: 1999, condition: used, pulling force - max. 6,0 t max. ram stroke 1250 mm dimensions of the machine ca. 1,20 x 1,20 x 3,25 m Giodpfjd Il A Nsx Ahvsp

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Weinig Rondamat 980 Gijdpewvvylsfx Ahvep Year 2010 Technical data: Max. tool width: 330 mm With PowerLock: 322 mm Tool flight circle: 100 - 300 mm With PowerLock (optional): 100 - 250 mm Grinding wheel diameter: 125 - 200 mm Spindle speed frequency-controlled: 1500 - 4600 rpm Grinding spindle drive: 1.5 kW

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Gijdpfx Ahoytr Swjvop Dismantling by buyer.

Condition: used, Year of construction: 2013, type of input current: AC, input voltage: 400 V, We are offering this used ELB-Schliff smartline surface grinding machine, year of manufacture 2013. Machine designation: smartline Machine number: 52362 Year of manufacture: 2013 Operating voltage: 400 V AC Frequency: 50 Hz Godpfx Ahsytrrqevoip Total connected load: 50 A Max. feed current: 22 A If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 150 kg, grinding length: 500 mm, grinding wheel diameter: 455 mm, grinding diameter: 300 mm, workpiece weight between centers: 150,000 g, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 500 mm, grinding wheel width: 75 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 7,500 W, overall weight: 4,600 kg, warranty duration: 12 months, year of last overhaul: 2026, Demonstration CNC cylindrical grinding machine prepared for automation Manufacturer: OKAMOTO Model: OGM-350 P NCIII Year of manufacture: 2023 Control system: Fanuc Oi Model D Operating hours: approx. 200 h Technical Specifications Max. swing diameter: 320 mm Max. distance between centers: 500 mm Max. workpiece diameter to be ground: 300 mm Max. workpiece weight between centers: 150 kg Max. workpiece weight (flange + chuck + workpiece): 40 kg Grinding Wheel Dimension (Diameter x Width x Bore): 455 x 75 x 127 mm Wheel speed: stepless Peripheral speed: 45 m/sec Grinding spindle head (X-axis) Travel, max.: 300 mm Swivel angle: not swiveling Workpiece table (Z-axis) Travel: 870 mm Swivel angle: 0 – 10° Workpiece spindle head Type: fixed/pivoting Spindle taper: MT 4 Spindle bore diameter: 20 mm Spindle speed: 10 – 500 rpm Swivel angle: not swiveling Tailstock Type: manual fine adjustment Quill travel: 30 mm Taper: MT 4 Drive Power Grinding wheel drive: 5.5 kW Total connected load: 20 kVA Dimensions / Weight L x W x H approx.: 3400 x 2330 x 1950 mm Machine Weight approx.: 4,600 kg Standard Equipment Carbide center points: 2 pcs Complete FANUC keyboard with radius compensation for generating ISO programs Workshop programming graphical software for grinding and dressing cycles with teach function GAP eliminator Gsdpsytqagefx Ahvjip Shoulder positioning Constant coolant flushing of the table LED lamp Documentation Leveling bolts and base plates Operator tool set Accessories Robot interface automatic machine shutdown 3-color signal lamp Precise positioning of the work spindle for workpiece loading dial gauge for table swivel angle balancing arbor automatic door complete grinding wheel guard when the door is open tailstock with electric quill retraction flange: 1 pc belt filter system Commissioning and training upon request. (Commissioning by Okamoto is required for warranty) Transport on request

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Godpjytn Hksfx Ahveip Maximum Depth: 165 mm Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Condition: new, Year of construction: 2022, Suction nozzle diameter: 180mm Nominal volume flow: 4200 m³/h Scavenging bag volume: 2 x 175 l Filter cleaning: manual Motor power: 3.8 kW / 400V Machine height: 1700 x 600 x 2400 mm (L x W x H) Weight: 69 kg Gjdpfx Asd Txblohvsip

Condition: new, Precision Heavy Duty Cylindrical Grinder Working Capacity: Max Length: 4000mm Max Diameter: 550mm Max Weight: 1,000kg Gsdpfx Aeytnh Ishvjip Center Height: 280mm Grinding Wheel Size: φ710×50~100×φ203.2 Grinding Wheel Speed: 890 RPM Main Spindle (5 steps by belt): 25~165 RPM Main Spindle Taper: MT#5 Tailstock Quill Taper: MT#5 Tailstock Quill Stroke: 30mm Table Swing Angle: 1° 30' Power: Grinding Wheel + Inverter 15HP Main Spindle + Inverter 3HP Hydraulic Pump Motor 3HP Cooling Pump 1/4HP Lubricant Motor 1/2HP

Condition: new, Year of construction: 2025, Suction nozzle diameter: 120 mm or 100 mm Nominal flow rate: 1900 m³/h Chip bag volume: 1 x 0.1426 m³ Gisdpjwhuufefx Ahvep Filter cleaning: manual Motor power: 1.1 kW Machine height: 1000 x 500 x 1800 mm (L x W x H) Weight: 39 kg

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor Giodpfx Ajug Ty Hehvop 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Weight:

Condition: new, Year of construction: 2025, Working width: 380 mm Working height: 250 mm Giodpsv R U Ifsfx Ahvsp 1st unit, rotor group: Group of two oscillating rotor brushes, Ø 200 mm, one 1.5 kW motor per brush, variable speed drive 2nd unit, rotor group: Group of two oscillating rotor brushes, Ø 200 mm, one 1.5 kW motor per brush, variable speed drive Both units with oscillation: yes Height adjustment: handwheel Height indicator: mechanical counter Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum carpet: yes Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Condition: used, Year of construction: 1997, Catalogue number 7724 TECHNICAL DATA - number of working spindles: 6 pcs - spindles pressed pneumatically onto the material - milling units adjustable up/down, right/left, and at angles - 6 pneumatic clamps - stepless feed speed adjustment - max milling height: 130mm Gisdsya Hl Eopfx Ahvsp - max milling length: 2500mm - max milling width: 330mm - shaft diameter: 40mm Motor power: - milling units 1-2: 2 × 5.5kW - milling units 3-4: 2 × 4.5kW - milling units 5-6 universal (sanding or milling): 2 × 4.5kW - extraction nozzle diameter: 10x152mm - air supply requirement: 6-8 bar - dimensions (L/W/H): 8000x3000x2420mm - weight: approx. 6000kg ADVANTAGES – Italian manufacture – For through-feed processing of curved elements according to template – 6 milling units – Not repainted – Safety guards – Original DTR + CE documentation – Used machine in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (based on 4.2 EUR exchange rate) (Prices may change depending on exchange rate fluctuations)

Condition: reconditioned (used), functionality: fully functional, The machine is retrofitted and modernized in 2025. The modernisation consists of adding the automatic infeed and auto cycle functions. The HMI and operating panel is offered in English, German and French. Dimensions Grinding Wheel (OD x ID x width) Ø 350 x Ø 127 x 100 mm Grinding wheel width 100 mm Ø min / max to rectify 1.5 / 50 mm No. infinite grinding wheel speeds Min / max speed of regulating wheel (r.p.m.) 10/250 rpm Infeed : Auto Auto cycle : Yes Godpfxjvtl Rps Ahvoip Dressing : Manual Dimensions Regulating Wheel (OD x ID x width) Ø 230 x Ø 76.2 x 100 mm Regulating wheel width 100 mm Maximum length to be rectified in plongeé 200 mm Length 1800 mm Width 1300 mm High 1600 mm Weight 2000 Kg Accessories: New Coolant tank with paper filtration system

Condition: good (used), Year of construction: 2018, Internal item no.: 25119 Mobile Surface Roughness Tester Mahr Marsurf PS10 Year of manufacture: 2018 Godpoyqzwkefx Ahvjip The measuring device is fully functional and can be inspected under power by appointment in a heated storage area of over 500 m².

Condition: used, Year of construction: 2010, functionality: fully functional, 1 pc Surface Grinding Machine FS 640 SC with Fagor control Make: Geibel & Hotz Year of manufacture: 2010 Technical Data Working Area: Grinding area - Maximum grinding area 600 x 450 mm - Standard magnetic chuck size 600 x 400 mm - Clamping area (table to spindle center) 140 - 525 mm - Standard grinding wheel 300 x 50 x 76.2 mm Gjdpfxex Dgvqj Ahvjip - Table load incl. magnet 600 kg - Grinding spindle motor power approx. 3.7 kW - Total connected load approx. 11 kW - Table speed 2 to 28 m/min - Cross/vertical feed speed 100-1000 mm/min Required space 3.95 x 3.16 x 2.47 m Machine weight approx. 2.1 t Equipment Machine-specific accessories, belt filter system, magnetic separator, extraction unit Magnetic chuck with adjustable holding force, automatic wheel dressing incl. compensation, Dressing diamond, balancing device, clamping device, 4 grinding wheels Technical data subject to change.

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Godpfjyqr Sxsx Ahvoip

Condition: used, Year of construction: 1980, machine/vehicle number: 19780, grinding length:600 mm grinding width:300 mm workpiece height:375 mm number of spindle speeds:1000 - 3000 UpM Gedpfx Aecxxrzshvsip grinding wheel dimensions::300 x 50 x 76,2 mm grinding spindle drive:2,8 - 8,4 kW weight of the machine ca.:3,5 t CNC-controlled, 3D-controlled profile-dressing unit, Unicom ELB-CNC control with integrated 024 CNC Unicon electric hand wheel, display screen, analogue spindle load display, stepless adjustable cross feed, coolant device with magnetic-roller chip collector, full housing, separate electrical cabinet, additional grinding wheel with flange

Condition: used, Year of construction: 1982, grinding length:500 mm grinding width:225 mm Gjdpfx Ascxxtmshvoip workpiece height:400 mm total power requirement:5,5 kW weight of the machine ca.:3,4 t NC81 NC-control, table belt drive 100-25000 mm/min., automatic feed, electronic dressing unit 020 NC-K with RPM-compensation, coolant pump, emergency cut-off

Year of construction: 1997, condition: ready for operation (used), A CNC cylindrical grinding machine Karstens including a coolant system Knoll VRF 150/620 (1997) and an emulsion separator KGH KFM-1200 (2000) is available. Grinding length: 650mm, center height: 190mm, max. grinding diameter: 3800mm, max. workpiece weight between centers/flying: 250kg/100kg, table swivel: +/-12.5°, table feed: 4m/min, machine dimensions X/Y/Z: approx. 3250mm/2150mm/1800mm, weight: approx. 3500kg, control: CNC 20. An inspection on site is possible. Gijdpfx Aeytgnyehvep

Condition: excellent (used), Year of construction: 2010, Palmary GU20x40NC universal grinding mahcine Year: 2010 SPECIFICATIONS: Capacity Swivel over table Ø210 mm Distance between centers 400 mm Max. external grinding diameter Ø200 mm Max. load of centers 60 kgs Grinding wheel O.D. x width x I.D. Ø355 x 38 x Ø127 mm Linear velocity 33 M/s Grinding wheel - X axis Manual distance 135 mm Auto. rapid advance 25 m/min Max. stroke 185 mm Gijdpfxsytftbj Ahvjp Min. setting unit 0.001 mm One turn of handwheel (graduation) 2 (0.005) mm Table - Z axis Traverse speed 1.5 m/min Max. stroke 480 mm Auto. reciprocate min. stroke 8 mm Feed of one turn of handwheel (2-step) 20 mm (2 mm) Swivel angle -3° , +12° Work spindle head Swivel angle -30° ~ +90° Center taper M.T. No. 3 Spindle speed (variable) 10~300 r.p.m. Max. load of spindle (tool holder included) 15 kgs (max. length: 100 mm) Tailstock Center taper M.T. No. 3 Stroke 20 mm Fine adjustment range ±0.03 mm Motor Wheel spindle 2.2 kW (4HP) Power Total voltage 7 KVA Tank Wheel spindle lubricant tank 7 L Hydraulic tank 46 L Coolant tank 110 L Machine weight 2000 kgs Accessories/options: - grinding wheels - flanges - internal grinding spindle - Marposs activ measuring system - DRO system for 2-axis, SINO - hand tools - documentations Under power in our warehouse.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 37,000 h, functionality: fully functional, Timn Scope of Supply • Item 1: Timesavers machine model 71-serie-1600-WW-RT (for No. 4 finish). • Item 2: Timesavers machine model 71-serie-1600-BB-RT (for SB finish). • Item 3: Filtration equipment • Item 4: Laminator UNIVERSAL LAMINATOR UL 2931 • Item 5: Extensive set of spare parts (contact rollers, billyrollers) • Additional equipment: tables and pallet stacks • Year of manufacture: 2007 • Operating hours: 37,000 • Machine in working condition. 1.2.1 ITEM 1: First Machine: 1 TIMESAVERS, 71 series-1600-WW-RT General Description: Grinding machine equipped with two wide abrasive belt top contact rollers for grinding and finishing stainless steel coils to a NO. 4 finish. Operation: • Load meter indicates percentage of head motor load, allowing full utilization of available horsepower. • Mitsubishi E 1070 Control unit including: • Electronically digital feed speed read-out in mm/min. • Electronically digital thickness set-up read-out in mm. • EMC Filter (for fluctuations in the electrical supply). 1st Head for No. 4 finish: • Contact roller: Ø280 mm, with special vulcanized oil and heat-resistant rubber, 55 Shore hardness, with special profile groove. • Heavy-duty grinding head. • Fine height adjustment of the head, precision to 0.01 mm for pressure or abrasive belt thickness adjustment. • Displacement can be read out on the dial indicator. • Outboard support: quick-release M20 bolt for fast abrasive belt changes and rigid head support. • Abrasive belt tension: air-operated and activated by thumb switch. Air tensioning automatically compensates for belt stretch. • Machine cannot be started unless belt is tensioned. • Abrasive belt tracking: electronic system automatically keeps the high-speed abrasive belt on the head. • Belt trimmer: lever to correct belt mis-tracking. • Tracking limit switch: safety stops the grinding head in case of tracking failure. • Frequency-controlled main motor, 45 kW, 8-22 m/sec for achieving different finishes. 2nd Head for No. 4 finish: (Specifications identical to the 1st head: 280 mm contact roller, frequency-controlled 45 kW motor, etc.) Technical Specifications (Item 1): • Max. working width: 1600 mm • Abrasive belt dimensions: 1600 x 2620 mm • Working height opening: 0.5-50 mm • Feed speed (frequency controlled): 0-30 m/min • Main motors (1st & 2nd head): 45 kW each • Total installed power: Approx. 100 kW • Machine weight: 9,000 kg _____ ITEM 2: Second Machine: TIMESAVERS, 71 series-1600-BB-RT General Description: Brushing machine equipped with two brush units for SB Scotch-Brite brush finish. Brush Head Specifications (1st & 2nd Head): • Scotch-Brite brush: Ø400 mm • Motorized height adjustment • Adjustable oscillation: 200 to 700 oscillations per minute • Frequency-controlled main motor, 22 kW per head Technical Specifications (Item 2): Godpfx Ahexvbxdevoip • Max. working width: 1600 mm • Brush diameter: 400 mm • Working height opening: 0.5-80 mm • Brush oscillation motor: 3 kW • Machine weight: 12,000 kg

Condition: new, New Electric Belt Hoist SWF - PFAFF Silberblau Type ATHLO belt - BH203L3E Textile belt hoist, crane hoist with trolley Serial No.: 3540053G01007 Year of manufacture: 2003 (new - unused) Lifting capacity: 1,600 kg Hook path: 6 meters Main hoisting speed: 6.5 m/min Creeping hoist speed: 1.0 m/min Trolley travel speed: 10 / 2.5 m/min Distance from undercarriage wheel to load hook: approx. 450 mm Giodoypw Hrjpfx Ahvep Pendant control cable length: approx. 6 meters 3 load strands = 1,600 kg Main hoist motor power: 1.9 kW Creep hoist motor power: 0.3 kW Trolley motor power at 10 m/min: 0.25 kW Trolley motor power at 2.5 m/min: 0.06 kW Power connection: 400 Volt, 50 Hz - Emergency stop - Very quiet, low-maintenance, and safe operation - Trolley for I-beams, with 2 travel speeds - Suitable for I-beams with approx. 100 to 200 mm width - TELEMECANIQUE position limit switch type XCR Space required L x W x H: 1100 x 700 x 600 mm Weight: 140 kg As-new condition – unused from stock

Condition: used, Year of construction: 1998, Technical details: grinding diameter: 250 mm grinding length: 2710 mm max. module: Gedpfjudf E Ajx Ahvoip min. module: total power requirement: 45 kW weight of the machine ca.: 15 t space required L x W X H: 7,1 x 4,7 x2,7 m max. wheel dia.: 450 mm Spindle drives Arena Siemens For Worm grinding we have not module, but pitch. Pitch is freely programmable from 0.001 to big value i.e. 500mm *