Used Installed for sale (8,028)

Condition: new, color: blue, Applicable material: Concrete Empty weight: 28.000 kg Dimensions (LxBxH): 1550 x 290 x 430 cm Cargo space capacity: 100.000 l Capacity: 100 m^3/h Water tank: 600 AGGREGATE STORAGE HOPPER – 4 x 12 m3 AGGREGATE WEIGHING HOPPER – 2 m3 AGGREGATE TRANSFER CONVEYOR – 800 x 11.000 mm TWIN SHAFT MIXER WITH LUBRICATION SYSTEM – 2 m3 CEMENT WEIGHING HOPPER - 600 kg WATER WEIGHING HOPPER – 300 lt ADDITIVE WEIGHING HOPPER – 20 lt AIR COMPRESSOR – 300 lt CONTROL CABINET WITH AIR CONDITIONER CONTROL PANEL, PC AND PLOTTER, POWER PANEL MOBILE CHASSIS CEMENT SILO – 100 Tons capacity SCREW CONVEYOR – Ø219 * 8.000 mm SILO TOP FILTER – 14 m2 SURFACE AREA SAFETY VALVE, LEVEL INDICATORS, SILO ACCESSORIES GENERAL FEATURES OF THE PLANT Dedpfx Aex D A Hxsb Tewf Plant Capacity : 100 m3/h Control Type : Full Automatic Mixer : 3000/2000 Twin shaft Mixer, 2 m3 wet concrete capacity. Weight of the plant : 28 Tons without cement silo. Plant Sizes : 16.5 (L) x 2.8 (W) x 4.2 (H) meters Total Motor Power : 165 kW Screw conveyors including . Voltage / Frequency : 380 V / 50 Hz Required area for installation : 300 m2 (excluding storage areas, truck park area and administrative building) No of operator to work the plant : 1 Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns

Condition: used, functionality: fully functional, 8 m Office Container / Shipping Container – with WC, Storage & Full Equipment – Immediately Available! PRICE: €7,500 negotiable SHORT & TO THE POINT: ✅ Office, WC & storage combined in one container ✅ Fully equipped: heating, sink, three-phase power, awning ✅ Immediately available – only 8 units in stock! DETAILS & HIGHLIGHTS: We offer well-maintained 27FT office containers (8 m length) in excellent condition – ideal for use as office containers, site cabins, or storage containers. These containers come from the French CARGLASS fleet and feature high-quality fittings. All technical components are fully functional and ready for immediate use. The condition is guaranteed and confirmed on the invoice. Equipment overview: ✅ Separate WC with washbasin ✅ Office area with plenty of natural light ✅ Kitchenette with sink & water heater ✅ Storage space ✅ Heating & air conditioning unit ✅ Electric awning (3x7 m) with remote control ✅ Three-phase power hookup, electrical installation & external lighting Djdpfx Asx Ea Sbob Tewf ✅ Ramp & fire extinguisher Special features: ✅ Practical layout: office – WC – storage ✅ Original pictures – condition as shown ✅ Ideal as construction site office, portable office, or mobile service point ✅ Fully functional and ready for immediate use DELIVERY & AVAILABILITY: ✅ Delivery within max. 2 weeks ✅ Delivery cost (excl. unloading): on request ✅ Immediate availability: 8 units ✅ Inspection possible Enquire & reserve now! Additional photos, technical drawings and further details available on request. MAGITU GmbH

Condition: new, Year of construction: 2025, Little used machine with appr. 275 working hours Your advantages: + extremely large cutting unit opening with 1300x1200mm Dwsdpfx Abogbkkrj Tsf + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Djdpox D Uz Iofx Ab Tswf Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Year of construction: 2019, operating hours: 8 h, condition: ready for operation (used), This 4-axis Mitsubishi EA28V ADVANCE die-sinking EDM machine was manufactured in 2019. It features a CNC Mitsubishi Advance M700 with a 15” touchscreen, pre-installed 3D CAD/CAM software, and supports Parasolid 3D file imports. The machine offers X/Y/Z travels of 650 × 450 × 350 mm and a C-axis with an EROWA quick-release system. Consider the opportunity to buy this Mitsubishi EA28V ADVANCE die-sinking EDM machine. Contact us for more information about this machine. Dwodpfx Abox D Enfe Tjf Application Types EDM

Year of construction: 2023, condition: excellent (used), Mettler Toledo Type: DSC 3 Mettler Toledo DSC 3 STARe System – FRS5+ Sensor – Thermal Analysis + Accessories Year of manufacture: 2023 Installation/Commissioning date: 06.11.2023 For sale is a high-quality Mettler Toledo DSC 3 STARe System, one of the leading laboratory instruments for Differential Scanning Calorimetry (DSC). Ideal for research, development, material testing, and quality assurance. The device comes from a controlled laboratory environment and is in excellent optical and technical condition. Device Functions: With the DSC 3, the following thermal properties can be analyzed, among others: - Melting point / glass transition - Crystallinity & phase transitions - Heat capacity (Cp) - Reaction kinetics (curing, cross-linking, decomposition) - Purity determination - Oxidation induction time (OIT) Thanks to the FRS5+ sensor, the device offers maximum sensitivity and stability. Technical Specifications: - Model: DSC 3 STARe System - Sensor: FRS5+ - Temperature range: up to 500 °C - Furnace power: 200 W - Gas controller: GC 005 - Cooling: fan / air cooling - Software version: 3.20 / 1.3.13 - Power supply: 100–240 V AC, 50/60 Hz - Weight: approx. 20–22 kg Dwodpfx Abox D Ufyj Tjf Important note: "The table shown in the photos is not part of the sale." Condition: used Included in delivery: (see pictures) - Mettler Toledo DSC 3 main unit - Touchscreen control unit - FRS5+ sensor - Gas controller GC 005 - Sample punch (Mettler) - Brooks Sho-Rate flowmeter - Comprehensive documentation & training materials - Multiple folders (STARe System, E-DOC, EDU packages) - Accessories as shown in the images (Specifications and data are subject to change and correction!) For further questions, we are happy to assist you by phone.

Condition: new, power: 154 kW (209.38 HP), fuel type: hybrid, color: blue, Year of construction: 2020, Type of fuel: Hybrid (electric and petrol) Applicable material: Concrete Empty weight: 38.000 kg Dimensions (LxBxH): 1600 x 280 x 420 cm Make of engine: Siemens Cargo space capacity: 135.000 l Capacity: 135 m^3/h Water tank: 1200 UNITS AGGREGATE STORAGE HOPPER – 4 x 30 m3 1 AGGREGATE WEIGHING BELT CONVEYOR 1000x13000mm 1 AGGREGATE TRANSFER CONVEYOR – 1000 x 11.000 mm 1 TWIN SHAFT MIXER WITH LUBRICATION SYSTEM – 3 m3 1 CEMENT WEIGHING HOPPER - 1500 kg 1 WATER WEIGHING HOPPER – 1000 lt 1 ADDITIVE WEIGHING HOPPER – 50 lt 1 AIR COMPRESSOR – 800 lt 1 CONTROL CABINET WITH AIR CONDITIONER 1 CONTROL PANEL, PC AND PLOTTER, POWER PANEL 1 MOBILE CHASSIS -DOUBLE 1 GENERAL FEATURES OF THE PLANT Plant Capacity : 120-135 m3/h Control Type : Full Automatic Mixer : 4500/3000 Twin shaft Mixer, 3 m3 wet concrete capacity. Weight of the plant : 45 Tons without cement silo. Plant Sizes : 16.5 (L) x 2.8 (W) x 4.2 (H) metersx2 Total Motor Power : 215 kW Screw conveyors including . Voltage / Frequency : 380 V / 50 Hz Required area for installation : 300 m2 (excluding storage areas, truck park area and administrative building) No of operator to work the plant : 1 Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns Number of trucks for transport : 1 pcs Head-Truck w+ 2 pcs Tented Truck PLANT DETAIL Dedpsx D A Ezjfx Ab Tswf BRAND POLYGON MODEL POLYGON PMC120 CONCRETE PLANT PLANT MODEL CONCRETE PLANT WITH TWINSHAFT MIXER PLANT CAPACITY Fresh Concrete 120 m3/Hour AGGREGATE BUNKER CAPACİTY 4x30= 120 M³ CEMENT WEIGHT CAPACITY 1500 kg WATER WEIGHT CAPACITY 1000 kg MIXER CAPACITY 4500-3000 LT TWINSHAFT MIXER( PMX 3000) TOTAL ENGİNE POWER 215 Kw NUMBER OF MIXER ENGINES 55x2 kw GAMAK VOLTAGE 380V - 50 Hz 1.9 MIXER TECHNICAL SPECIFICATION Feature Value/Unit Capacity Loading Capacity m3/h 3 Fresh Concrete Capacity m3 3 Capacity Lt 4500 Gearbox /Engine KW 55x2 ERMAKSAN/GAMAK 1500 rpm/m Sıde wears mm 8 HARDOX Mixer Body Wear m3 10 HARDOX Number Of Scraper pcs 4 Number Of Mixing Arms pcs 14 Scraper and Mıxıng Pallets mm 32 mm NI-HARD-4 Engine Power Kw 110 Water Distributer Available Pneumatic Discgarge Cover Kw Available Maintenance and Safety Valve Available Emergency Button Available Mixer Cover System Hydraulic Cover Open/Close Sensor Available

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00532, load capacity: 125 kg, arm reach: 3,100 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/125L manufactured in 2016.12. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iC/125L Model Number: A05B-1333-B261 Year of Manufacture Robot: 2016.12 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3100 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1115   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2016.12 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Dwjdpfx Aox D Uftjb Tof Teach Pendant Cable Length (m): 10

Year of construction: 2019, operating hours: 3,934 h, condition: ready for operation (used), Control Unit Brand HAAS Model NGC Dsdex D Nxhspfx Ab Tjwf Main Drive Spindle speed range 4000 Spindle motor power 14.9 kW14.9 kW Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm Media Chip conveyor Yes Additional Equipment ATP – Automatic tool probe Install Kit – Bar feeder installation kit with adapters for bar diameters 9–44 mm / Programmable, pneumatically operated finished part catcher (max. part dimensions: 108 mm x 54 mm, max. weight: 2.27 kg) CONVEYOR – Chip conveyor (belt type) LINER ADAPTER 2.00 – Haas liner adapter for spindle with bar diameter 2" (51 mm) HAAS Bar Feeder – Compatible with HAAS lathes (ST-10 to ST-35), for automatic bar feeding LT-6K-UP – Option to increase the speed of driven tools up to 6000 rpm PCAT – Pneumatic part catcher, programmable, for parts up to 96 mm x 152 mm PTS – Hydraulic tailstock This 3-axis HAAS ST-20Y was manufactured in 2019. A robust horizontal turning machine, it offers reliable performance for precision machining. Consider the opportunity to buy this HAAS ST-20Y horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Applicable material: Concrete A POLYGONMACH PCC60 60 M3 compact concrete batching plant, if high quality and well designed, can provide users with many advantages: 1. Thanks to its high production capacity, it provides a fast supply of concrete used in large and complex construction projects. 2. Depending on its technical characteristics, especially mold, pump, etc. When used, it simplifies the concrete pouring works and speeds up the works without sacrificing quality. 3. Thanks to the automatic control systems, the concrete quality is ensured at a consistently high level. This ensures excellent results in construction projects. 4. Thanks to its compact design, it takes up little space and is easy to transport, install and disassemble. Thus, users can quickly move these exchanges from one place to another. 5. With energy efficient and environmentally friendly design options, operating costs are lowered, thereby saving more money for users. 6. If properly cared for, it is long lasting and generally delivers a high quality product. Because of all this, a high-quality and well-designed compact concrete batching plant with a capacity of 60 M3 is preferred by construction companies and contractors. Dwjdpjx D A Aysfx Ab Tof A POLYGONMACH 60 M3 compact concrete batching plant can use different types of additives, cements and aggregates depending on its type and properties. These factors determine the desired properties of concrete. Cement: The cements generally used in concrete batching plants are ordinary ported cements, blast furnace slag cements and reactive powder additive cements. These different types of cement can change various properties of concrete. Mobility: stationary Other characteristics: compact, automatic Capacity: 60 m³/h(2,118.88 ft³/h)

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00533, load capacity: 20 kg, arm reach: 3,110 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/20L manufactured in 2015.03. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/20L Model Number: A05B-1125-B205 Year of Manufacture Robot: 2015.03 Djdpfex D Ubnsx Ab Tewf Warranty term (months): 12   Payload (kg): 20 Reach (mm): 3110 Repeatability (mm): ± 0.11 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 540   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2015.03 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Year of construction: 2011, operating hours: 18,595 h, condition: ready for operation (used), General Data Measurements width 4600 Measurements depth 9950 Measurements height 2400 Machine weight 12000 Control Unit Brand SIEMENS Model Sinumerik 840 D Main Drive Spindle speed range 300 Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Workpiece Z 115 mm Max Material Thickness Steel 20 mm Stainless steel 15 mm Aluminium 15 mm Additional Equipment Closed machine frame with an integrated laser unit Torque drive combined with direct linear drives Enclosed beam delivery via fiber optic cable Water-air chiller for machine cooling Integrated electrical cabinets with internal lighting Automatic pallet changer (lengthwise installation) Power supply through TruDisk integrated into the machine Working area lighting Wide longitudinal conveyor Positioning laser diode Dwsdpfsx D Sgzox Ab Tjf This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information. Application Types Cutting

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: R-00530, load capacity: 50 kg, arm reach: 2,050 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C302#EGN, Refurbished FANUC M-710iC/50 manufactured in 2010.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/50 Model Number: A05B-1125-B201 Year of Manufacture Robot: 2010.05 Warranty term (months): 12 Dwsdpfx Asx D Tmcjb Tef   Payload (kg): 50 Reach (mm): 2050 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2010.05 RCC Length (m): 7   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 12

Year of construction: 2007, condition: ready for operation (used), General Data Machine weight 2000 kg Main Drive Number of axis 2 Dwodpex D H N Defx Ab Tof This BRUDERER BSTA 25 was manufactured in 2007. A high-speed precision stamping press, it features a vertical main ram for precise stamping and a horizontal feed mechanism for workpiece positioning. Ideal for sheet metal forming, stamping, pressing, and metal shaping, it operates at high speeds with computerized control. Compact design ensures space-saving installation. Consider the opportunity to buy this BRUDERER BSTA 25 metal press. Contact us for more information. Application Types Forming

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: R-00531, load capacity: 50 kg, arm reach: 2,050 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C302#EGN, Refurbished FANUC M-710iC/50 manufactured in 2010.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/50 Model Number: A05B-1125-B201 Year of Manufacture Robot: 2010.05 Warranty term (months): 12   Dwodpfx Abox D Tl Sj Tjf Payload (kg): 50 Reach (mm): 2050 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2010.05 RCC Length (m): 7   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 12

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand MAZATROL Movement X-Axis Movement 615 mm Y-Axis Movement 260 mm Z-Axis Movement 1585 mm W-Axis Movement 1574 Additional Equipment Overload detection system / M-coolant (equipped) prep M-thru 7MPa / Mazak Monitoring System B (RMP600) / Mazacheck / C-axis through milling head during rotation / M-code to be switched coolant/air thru / Ethernet operation function / B) Cylindrical & Polar Coordinate (EIA) / 5-Axis Machining Package for SmoothX / Signal Tower (3 colors lights, square) / 2nd Spdl C-Ax. Sync (fact. install only) / Raw/tube connection parts til 1 & 2nd spindle / Mayfran, Consep2000 side / Mayfran, Variflow HP Pack #1 (7 variable flow/pressure stages), 7.5 K/ Mayfran, HP Twin in-line cartridge filter upgrade / Mayfran, coolant gun This 5-axis Mazak Integrex i-400S was manufactured in 2017, featuring a 1500 mm bed, 72 Capto-tool magazine, and a Mazak Monitoring System B. It includes a 5-axis machining package for SmoothX and Ethernet operation functionality. If you are looking to get high-quality turn-mill capabilities, consider the Mazak Integrex i-400S machine we have for sale. Contact us for more information. Application Types Turning Dwodpfx Absx D Emue Tsf

Condition: ready for operation (used), Year of construction: 2005, operating hours: 79,600 h, General Data Machine weight 22500 kg Dsdpfx Asx D Hnajb Tjwf Clamping Unit Clamping force 4000 kN Injection Unit Shot weight 1860 g Screw diameter 90 mm This Arburg 820S-4000-3200 was manufactured in 2005. It features a clamping force of 4000 kN, a screw diameter of 90 mm, and a shot weight of 1860 g. The machine operates with a SELOGICA control system and has a total installed power of 96.2 kW. Consider the opportunity to buy this Arburg 820S-4000-3200 hydraulic injection moulding machine. Contact us for further details regarding this machine. Application Types Injection Moulding

Year of construction: 1998, condition: ready for operation (used), General Data Machine weight 8600 kg Control Unit Model Delem 65 CNC control Main Drive Bending length 2550 mm Additional Equipment Extended Installation Height and Stroke: Additional 150 mm each 2nd Foot Switch This 6-axis TRUMPF TrumaBend V85S press brake was manufactured in 1998. It features a bending length of 2,550 mm, an 850 kN bending force, and a 6-axis back gauge. The Delem 65 CNC control enhances precision, while the electro-hydraulic twin cylinder drive ensures robust performance. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85S machine we have for sale. Contact us for more information about this machine. Dwjdpfsx D N Susx Ab Tsf Application Types Bending

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1900 mm Measurements depth 6600 mm Measurements height 2400 mm Machine weight 14900 kg Injection Unit Screw diameter 50 mm Shot weight 482 g Stroke volume 530 cm3 Injection pressure 2426 bar Adjustable heating zones 5 Dodpfex D Nwqex Ab Tewf Nozzle pressure 110 kN Clamping Unit Clamping force 2500 kN Opening stroke 670 mm Max open daylight 1380 mm Mould height min 330 mm Mould height max 710 mm Ejector stroke 200 mm Ejector force for / back 81 kN Media Pump drive power 30 kW Oil tank 550 L This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2009, Additional Equipment Robot Arm: max. handling weight: 240 kg Djdex D Er Dspfx Ab Tewf Robot Arm: max. reach: Not provided Nominal Payload: 240 kg Additional Arm Load: 50 kg Additional Swing Load: 100 kg Maximum Additional Load (Arm and Swing): 100 kg Additional Carousel Load: 300 kg Maximum Total Load: 640 kg ForceTorqueControl: Yes This KUKA KR 240-2 2000 robot arm was manufactured in 2009. It features a robust 6-axis system capable of handling a maximum total load of 640 kg, with an arm length of 1100 mm. Ideal for complex automation tasks, this robot arm can be installed on floors or ceilings, enhancing versatility. A great opportunity to buy this KUKA KR 240-2 2000 robot arm. Contact us for further details regarding this robot arm. Application Types Robotics

Condition: ready for operation (used), Year of construction: 2002, General Data Measurements width 6000 mm Measurements depth 6600 mm Measurements height 3200 mm Machine weight 18000 kg Control Unit Brand SIEMENS Dwedpsx D Evvefx Ab Tsf Model SINUMERIK Main Drive Number of axis 4 This 4-axis DECKEL MAHO DMC 63 H was manufactured in 2002. A robust horizontal machining center, it features an installation weight of 18 tons and dimensions of 6.6m x 6m x 3.2m. Currently, the system does not boot up, displaying an error message with no other known damage. Consider the opportunity to buy this DECKEL MAHO DMC 63 H horizontal machining center. Contact us for more information about this machine. Application Types Milling

Year of construction: 2003, condition: ready for operation (used), This DIMTER S50 Opticut was manufactured in 2003. A robust optimizing cross-cut saw, it features a processing length of 5 m and a saw blade diameter of 500 mm. A new Movidrive converter was installed in 2018, enhancing its performance. If you are looking to get high-quality cutting capabilities, consider the DIMTER S50 Opticut machine we have for sale. Contact us for more information about this machine. Dsdpfx Ajx D Hxrjb Tjwf Application Types Sawing (Wood)

Year of construction: 2013, condition: ready for operation (used), Main Drive Laser power 4 kW Additional Equipment Air dryer with filter Documentation (1 copy on CD) T eleservice module (incl. modem and installation) CAM MAESTRO Windows. Dongel license on the USB PORT / MAESTRO software package includes: - Nesting module .dwg Import / .dxf Multiimport - CycleTimeLight “Quick Piercing” oil spraying device Djdpfx Abjx D N Tls Towf Automatic pallet changer T yp P A Nozzle changer Scrap conveyor Extraction system (2. 400m3) This Prima Power CP 4000 Zaphiro Laser Cutting machine was manufactured in the year 2013 and has 37978 laser hours. The machine has a laser power of 4 kW. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2019, This 6-axis Fruitcore Horst600 Fast robot arm was manufactured in 2019. It features a nominal load capacity of 3 kg, a maximum range of 584 mm, and operates quietly at less than 70 dB(A). The robot arm is designed for a compact installation area of 382 × 200 mm and is protected by an IP54 class. If you are looking to get high-quality automation capabilities, consider the Fruitcore Horst600 Fast machine we have for sale. Contact us for more information. Dwodpfx Aex D Nbvjb Tef Application Types Robotics

Year of construction: 2014, condition: ready for operation (used), General Data Measurements width 2260 mm Measurements depth 8950 mm Measurements height 4050 mm Machine weight 3900 kg This FOREL VW2800AO was manufactured in 2014. It features a comprehensive setup for glass processing, including edge deletion, inspection, frame placement, assembly, gas filling, pressing, spacer application, and sealing capabilities. Dimensions are substantial with a length of 8950 mm and height of 4050 mm. It operates under continuous conditions, adhering to CEI EN 60204-1 standards, with a total installed power of 35 kW. Contact us for more information about this machine. Application Types Other Machine Tools Dwsdpfxsx D Dxio Ab Tof