Used Inspection Machine for sale (71,349)

Year of construction: 2019, condition: ready for operation (used), An automatic optical inspection machine Göpel for inline quality control of electronic printed circuit boards is available. Inspection types: 2D/3D/360°/AOI, viewing angle: 45°, 3D camera module: ViewZ, resolution X/Y: 21µm/10.5µm, component clearance below/above the assembly: 50mm/40mm, max. inspection speed: 100cm²/s, max. inspection dimensions X/Y: 570mm/510mm, max. printed circuit board weight: 5kg, min. printed circuit board width: 80mm, machine dimensions X/Y/Z: approx. 1200mm/1450mm/1650mm, weight: approx. 950kg. Including licences. Documentation available. An on-site inspection is possible. Lhsdpeymfccofx Ahvod

Year of construction: 2014, condition: ready for operation (used), Two automatic optical inspection machines Koh Young for inline quality control of electronic printed circuit boards are available. Resolution: 15µm, height accuracy: +/-0%, max. 3D measurement height: 5mm, inspection speed: 18.3cm²/s, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 510mm/580mm, PCB thickness range: 0.4mm-5mm, component clearance below the assembly: 50mm. Machine dimensions X/Y/Z: approx. 1000mm/1270mm/1650mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Ljdpfoymfciox Ahvjhd

Year of construction: 1995, condition: ready for operation (used), Max. roll diameter: 400mm, height: 1753mm, documentation available. Lsdpfefwml Rsx Ahvehd

Condition: ready for operation (used), Year of construction: 2013, A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Lhodoxqgxrspfx Ahved

Condition: ready for operation (used), Features: automatic edge guidance for high quality roll presentation, measuring function, large inspection area, cut length function, foot operated on off switch, speed control, reverse capability, emergency stop, locking wheels allow easy movement. Cradle: with 6 rollers, max. roll width: 1800mm, inspection surface: 600mm, max. re-roll diameter: 400mm, operating speed: 0-45m/min, motor: 1x230V/50Hz, 1x120V/60Hz, length: 2450mm, width: 1500mm, height: 1110mm, weight: 302kg. Condition: counter not connected, was removed, switch for the backlight is missing, on off switch is missing, foot pedal for start/ stop is missing, cutting knife is missing. Operating hours unknown. An on-site inspection is possible. Ljdpfexz Ew Uox Ahvjhd

Year of construction: 2011, condition: ready for operation (used), Various laboratory devices are available for quality testing in the textile industry. 1) Textile tensile tester Textechno FPA ME, year of manufacture: 2000, max. speed of pull-off clamp: 5000mm/min, clamping dimensions X/Y: 46mm/10mm, clamping pressure 3bar/5bar/8bar: 1200N/2000N/3200N, max. clamping distance: 960mm, force transducer: E 10N/E100N/E1000N, accuracy: +/-1%, machine dimensions X/Y/Z: approx. 885mm/700mm/1730mm, weight: approx. 200kg, control: Textechno Bus. 2) Illuminated table White Screen Normlight, lighting: 3x 36W, machine dimensions X/Y/Z: approx. 1250mm/800mm/850mm. 3) Textile length measuring machine Yuan More YG086, year of manufacture: 2011, measurement: linear yarn density, yarn count: 1-6, frame circumference: 1000mm (+/-1mm), frame speed min./max.: 30r/270r/min, max. yarn frame turns: 9999, yarn traverse stroke: 35mm (+/-0.5mm), single yarn tension range: 0cN-100cN, machine dimensions X/Y/Z: approx. 850mm/680mm/550mm, weight: approx. 50kg. 4) Digital microscope Di-Li. 5) Light box Just color Viewing Light. 6) Cardwinder Graf & Co CCW15. Documentation available. On-site inspection is possible. Ledjuanrwspfx Ahvshd

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Lsdpotz Dkyjfx Ahvjhd

Condition: ready for operation (used), Four fabric inspection machines are available (1) Menzel WOB 1.600mm fabric inspection machine, working width: 1600mm (2) Menzel WOB 3.200mm fabric inspection machine from Hoftex, working width: 3200mm (3) Bauch Maschinenbau CB-WU 380 fabric inspection machine (4) Maag CT 5206-Ah fabric inspection machine. On-site viewing is possible. Ledpsw R Uzvsfx Ahvohd

Year of construction: 2009, condition: ready for operation (used), A Polytex foam coating machine is available. Roll width: 1900mm. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2500mm, weight: approx. 2400kg. Documentation available. An on-site inspection is possible. Ljdpfx Ahoxt Rm Sjvjhd

Condition: ready for operation (used), Year of construction: 2009, Two Polymaster sample display machines for the film industry are available. Working width: 1900mm/2100mm, roll weight: 100kg, machine dimensions X/Y/Z: approx. 2550mm/1050mm/2000mm. Documentation available. An on site inspection is possible. Ledpoyh Nvtsfx Ahvjhd

Condition: ready for operation (used), Year of construction: 2021, An automatic Gise inspection machine for nails is available. Inspection method: image processing system, camera system: Keyence CV-X300F, throughput: approx. 60nails/min, detection accuracy: 98%, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1100mm, weight: approx. 150kg, control system: Siemens S7-1500. Including segmented conveyor. Documentation available. An on-site inspection is possible. Ledpsyarqasfx Ahvjhd

Year of construction: 2003, condition: used, functionality: fully functional, OPTREL SEMI-AUTOMATIC INSPECTION MACHINE, MODEL PWL Lsdeycxayspfx Ahvohd Semi-automatic inspection machine, ideal for small volumes and critical products requiring inspection. Particles and imperfections are visually inspected by an operator using a high-magnification lens and a brightness-adjusted setup. Built in 2003. CHARACTERISTICS - Wide product range (ampoules, vials and cartridges for injectable liquid products) - Change parts optimized for quick change over PRODUCTION - Output: 100 units/min - Working height: 900 ± 25 mm - Size: 2250 x 1750 x 2100 mm

Year of construction: 2025, condition: new, functionality: fully functional, Flexor 440IS with EyeC ProofRunner Web 450 print image inspection system and REA-JET HR 4K printing system. The Flexor 440IS is the ideal fully integrated 100% inspection solution. The 440IS machine allows the operator to inspect a web width of up to 440 mm and remove defects. The machine offers flexibility and high performance demanded by customers with the highest quality standards. High-speed inspection, low maintenance costs, and full integration of the 100% inspection camera provide converters with a package that exceeds all expectations. The offer price is exclusive of camera and inkjet unit. These can be selected according to customer requirements and preferences. Lodpfjwkt D Djx Ahvohd Have we sparked your interest? We would be happy to assist you!

Condition: used, Year of construction: 2022, Koh Young Machine AL-SL-00713 1. LZALPHA L-S-20-4W-L-6.5M  1  AL-SL-00713 Zenith Alpha HS L-Size Single Lane 4W/8M L→R 20um L (Lean) Platform Platform: L (Lean) Platform (standard version) Type: Zenith Alpha, L-Size Camera Resolution: 20 microns Projection: 4-way grating projection Camera: 6.5 Megapixels Illumination: IR-RGB LED Operating System: Microsoft Windows 10 IOT Enterprise LTSC (Standard) Conveyor: Single lane Conveyor Type: Front fixed (Standard) Conveyor Belt Type: Timing belt - ESD (Standard) Conveyor PCB Transfer Height: 870–950 mm (Standard) Conveyor PCB Direction: L→R (Standard) Max. PCB Size: 490 × 510 mm (front fixed, Standard) Min. PCB Size: 50 × 50 mm PCB Thickness: 0.4–5 mm ESD: Standard + Extended Safety Option CE Declaration: English (Standard) Specification conforms to standard setup System Dimensions (W×D×H): 1000 × 1295 × 1627 mm HS Code: 9031.4990 Country of Origin: Republic of Korea 2. 803020-009105  1  to AL-SL-00713 AOI REVIEW STATION (REVIEW STATION SET, WINDOWS 10) Includes DELL XE3 PC with Windows 10, monitor, and keyboard HS Code: 8471.4900 Country of Origin: People's Republic of China 3. 101020-003007  1  to AL-SL-00713 UPS OPTION AOI_SPI (SMT750) APC – C-platform HS Code: 8504.4030 Ljdpfx Ahsx Tzhpsvohd Country of Origin: Philippines

Condition: like new (used), functionality: fully functional, Year of construction: 2017, control type: PLC-controlled, degree of automation: automatic, actuation type: pneumatic, input voltage: 230 V, input current: 9 A, input frequency: 50 Hz, compressed air connection: 5.5 bar, overall weight: 839 kg, We offer this near-new Eagle Pack 430 Pro X-Ray inspection machine, year of manufacture 2017. Lhodpsx Sv Dvofx Ahvjd Air supply: 80 psi Voltage: 230 VAC 1~ Current: 9.2 A Frequency: 50/60 Hz Fuse: 15 A Protection class: IP65 Weight: 839 kg SCCR: 5000 A Document number: E178741 Drawing number: 28320776 Production date: March 2017 The machine uses X-ray detection to identify all foreign bodies in foodstuffs, such as metals, stones, etc., and automatically removes them from your product. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, SPECOLA - FABRIC INSPECTION MACHINE TECNOTEAM USED, WORKING WIDTH 190 CM, TOP LIGHTING Ledpfxjx A Inls Ahvohd

Condition: used, functionality: fully functional, BREVETTI CEA CARTRIDGE INSPECTION MACHINE, MODEL K32-400 Automatic inspection machine for the presence of bubbles, cap defects, stopper defects or wrong position in cartridges. With three inspection units for checking for particles. CHARACTERISTICS Height of infeed/outfeed: 900 +/- 25 mm AVAILABLE FORMAT PARTS - For containers: with a diameter of 8 to 52 mm and a height of up to 150 mm - For cartridges: Ø 8.65x63 mm and Ø 8.65x76 mm PRODUCTION -Output: up to 400 cartridges/min ENERGY CONSUMPTION - Electricity: 400V, 50/60Hz, 3Ph - Power: 8 kW - Compressed air: 5 bar DIMENSIONS Lhsdpfsxzupgjx Ahvod - Size: 2400 x 2600 x 2440 mm (approx) - Net weight: 2800 kg (approx)

Condition: used, Year of construction: 2006, functionality: fully functional, MW TECHNOLOGIES BENCH TOP INSPECTION SYSTEM, MODEL MIH-DX Year of construction: 2006 Small machine optimized for small workstations, laboratories or production lines. For the inspection of vials, ampoules and other components for particulate particles. Suitable for integration in GMP-controlled environment; the stainless construction and enclosed hood facilitate cleanliness and inspection tasks. As the unit is rated 115 V/60 Hz, for operation in Europe (230 V/50 Hz) adapter or transformer may be required unless internal wiring has been converted. 7 units of this machine are available. CHARACTERISTICS - Enclosed hood with viewing window and adjustable lighting system - Stainless-steel construction, robust and easy to clean - Controls on front panel: power switch, lighting selector, intensity dial - Lighting: On/off selection, intensity adjustment knob (as visible in photo) ENERGY CONSUMPTION - Voltage: 115 V AC (standard US mains) Lhsdpfxexzuito Ahvod - Phase: single phase (1 PH) - Current: 5 A - Frequency: 60 Hz

Condition: good (used), Year of construction: 2006, Stork FIM NT12+ HD Final Inspection Machine Poultry Manufacturer: Stork Lhjdpjv Hx Nfjfx Ahvjd Model: FIM NT12+ HD Year: 2006 Number of units: 12 Capacity: 8000-9000 BPH Machine Dimensions LxWxH: 1.365x1.205x2.750 mm Machine Weight: 750 kg.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 470 mm, center width: 1,000 mm, TECHNICAL DETAILS Distance between centres: 1,000 mm Swing diameter over bed: 470 mm Spindle speed ranges 1: 50–270 rpm 2: 150–850 rpm 3: 450–2,500 rpm MACHINE DETAILS Electrical supply Mains voltage: 415 V Phases: 3 Frequency: 50 Hz Control voltage: 24 V Lhjdjywg Rdspfx Ahvod Main motor power: 7.5 kW Main motor current draw: 13 A Auxiliary motor power: 0.173 kW Auxiliary motor current draw: 1.55 A Total motor power: 7.673 kW Total current draw: 14.55 A

Condition: used, Year of construction: 2014, Technical details: Lhsdjyv Erdjpfx Ahvod max. turning diameter: 350 mm turning length: 540 mm control: 0i-TD swing dia.: 510 mm bar material dia.: 66 mm spindle bore diameter: 76 mm travel -x axis: 200 mm travel -z axis: 560 mm Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5 kW turret stations / rotary tool stations: 12/0 BMT 55 Rapid traverse feeds x/z: 24/ 24 m/min tailstock quill taper MT: MK4 (Live) Tailstock Travel: 490 mm tailstock quill stroke: 80 mm tailstock quill diameter: 75 mm dimensions of the machine ca.: 3500 x 1400 x 1850 mm total power requirement: 32 kW weight of the machine ca.: 4 t Accerories Chip conveyor Parts catcher Spindle 1 Chuck 200 mm manual tool eye Samsung turning center in excellent condition with rotary tools, y-axis and subspindle for complete manufacturing of components. *

Condition: used, Year of construction: 2015, Technical details: Lhjdpfeyv En Ssx Ahvsd max. turning diameter: 350 mm turning length: 540 mm control: 0i-TD swing dia.: 510 mm bar material dia.: 52 (66) mm spindle bore diameter: 61 (76) mm travel -x axis: 200 mm travel -z axis: 560 mm Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5 kW turret stations / rotary tool stations: 12/12 BMT 55 Power rotary tools: 3,7 /2,2 kW RPM of rotary tools: 6000 1/min torque rotary tools: 26,2 Rapid traverse feeds x/z: 24/ 24 m/min tailstock quill taper MT: MK4 (Live) Tailstock Travel: 400 mm tailstock quill stroke: 80 mm tailstock quill diameter: 75 mm dimensions of the machine ca.: 3500 x 1400 x 1850 mm total power requirement: 32 kW weight of the machine ca.: 4 t Accerories Chip conveyor Parts catcher Spindle 1 Chuck 200 mm manual tool eye Samsung turning center in excellent condition with rotary tools, y-axis and subspindle for complete manufacturing of components. *

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. Lhsdpfx Asq N Ud Ishvjd 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: 12097, CNC Milling Machine XYZ SMX3500 The machine is in very well-maintained condition. ● Condition: Not inspected ● Delivery terms: Free on truck (FOT) ● Location: 42477 Radevormwald, Germany ● Availability: By arrangement – Collection date for the item is set for 06.05.2026. Unfortunately, collection outside of this timeframe cannot be accommodated. ● Payment terms: Advance payment by bank transfer ● Internal ID: DÄ10 ● Power-on demonstration possible: Yes Lsdpfeyvi Enex Ahvjhd Technical specifications: ● Control: PROTO TRAK SMX ● Table dimensions: 1200 x 300 mm ● Spindle speed: 5,000 rpm ● Main drive power: 3.75 kW ● 400 V ● 50 Hz Scope of delivery: ● Available manuals (completeness not guaranteed) ● Hoffmann vice, jaw width: 125 mm ● Machine lamp Dimensions & weights: ● Installation dimensions (L x W x H approx.): 2000 x 2000 x 2500 mm ● Weight approx.: 2,500 kg If you have any questions or would like to arrange an inspection, please feel free to contact us! Additional notes: ► On request, we can offer transport to the destination ► The quoted price is net, plus VAT ► The goods are sold under exclusion of any warranty ► Technical data provided without guarantee ► Subject to prior sale ❗Sale of the item is exclusively to businesses❗

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: SL375, CNC Lathe XYZ SLX355 ● Condition: Unchecked ● Delivery terms: Free loaded on truck ● Location: 42477 Radevormwald, Germany ● Availability: By arrangement – The pickup period for the equipment is set for 06/05/2026 and 07/05/2026. Unfortunately, collection outside this timeframe cannot be accommodated. ● Payment terms: Advance payment – by bank transfer ● Internal reference number: DÄ5 ● Inspection under power: Yes Technical specifications: ● Control system: PROTO TRAK SLX ● Drive power: 5.5 kW ● Spindle speed: max. 4000 rpm ● Turning length approx.: 750 mm ● Swing over bed approx.: 400 mm ● Swing over cross slide approx.: 180-200 mm Equipment: ● Three-jaw chuck (diameter: 200 mm) ● Tailstock ● Quick-change tool post Scope of delivery: ● Available manuals ● Set of quick-change tool holders with turning tools ● Four-jaw chuck (Röhm, diameter: 160 mm) ● Toolbox with accessories as shown in the images Dimensions & weight: Lhodpfx Ahsyvi A Tjvod ● Footprint (L x W x H) approx.: 2300 x 1400 x 1900 mm ● Weight approx.: 2000 kg If you have any questions or wish to arrange an inspection, please do not hesitate to contact us! Additional notes: ►Transport to the destination can be offered upon request ►The offer price is net plus VAT ►The equipment is sold with exclusion of any warranty ►Technical data provided without guarantee ►Subject to prior sale ❗Sale exclusively to business customers❗