Used Infrared Thermometer for sale (381)

Condition: good (used), Year of construction: 1993, functionality: fully functional, SPECIFICATION Flexographic Printing Machine KDO, UK-made – 6 printing stations. - Web width for printing: 260 mm (10.5”) - Maximum unwinding diameter: 304 mm (12”) - Minimum unwinding diameter: 152 mm (6”) - Lateral adjustment: o 9 mm when the machine is stopped o 3 mm during machine operation - Unwinding: o Shaft diameter: 76.2 mm (3”) o Reel diameter: 450 to 500 mm - Rewinding – 2 stations, shaft diameter: 76.2 mm (3”) - Waste removal during die-cutting: o 2 stations, shaft diameter: 76 mm - Longitudinal slitting - Die-cutting device – 3 stations: 1. Label die-cutting station Lsdpfx Ahjx S Hxqovsri 2. Edge punching station 3. Cross perforation station - 3 cutting cylinders, 12” - Printing & inking stations – dual roller system: o Rubber roller o Anilox raster roller - Drying – each printing station equipped with a dryer, infrared lamp, and fan with adjustable drying power - Drive – electric motor 380/420 Volt - Power supply: 3 x 415V - One revolution: 12” (~30.5 cm) - Web guiding - Web activation station - Raster rollers: o 300/20 LPI – 3 pcs. o 450/14 LPI – 3 pcs. - Printing cylinders: o 12” – 6 pcs. o 11” – 6 pcs. - Ink trays – 6 pcs.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) Lrodpfxsykuh Nj Ahvei ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program Lrodpfx Ajykud Rohvsi TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25NEOS05, Mobile stretch winder NEOS TECHNICAL DETAILS: HMI touch panel 7" two maintenance-free AGM batteries 12 V - 120 Ah connected in series Standard charger: 230 V - 1L+N+PE - 50 HZ Autonomy 200 - 300 pallets per load High frequency battery charger with LED indicator Winding height machine (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop function of the machine according to CE standards Ø 22 mm ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: F01 - 01 - cross winding (up/down) F01 - 02 - Single wrap (up only or down only) F01 - 03 - Complete wrap cycle with foot wraps at the same starting height F01 - 04 - Fast cycle (with limited or no foil overlap) F01 - 05 - layer cycle F01 - 06 - Economical winding program Soft start cycle for applying edge protection Winding cycle with reinforcement and adjustable number of windings Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: 99 storable winding programs All function parameters can be set via the display F00 - Screen lock program change Adjustable machine speed around the pallet up to 90 m/min Lifting carriage speed can be adjusted up and down independently of each other Lift carriage speed from 1.3 up to 5.4 m/min Lifting carriage speed down from 1.3 to 5.4 m/min Number of wraps on the pallet foot (1 - 10 wraps) Number of wraps on the pallet head (1 - 10 wraps) Adjustment pallet wrapping height Foil application tension foot & head winding / ascent & descent independently adjustable Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable Ergonomic height for foil change Display foil consumption (option for PRS - PS) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE: Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm Lrjdpfoykua Eex Ahvsi -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% - PATENTED "ARYA" SYSTEM FOR PRS / PS - ARYA system for automatic foil blowing and cutting, incl. infrared remote control -Manual cord formation on the foil carriage to strengthen the winding -Automatic cutting unit (FE, PRS & PS) - Machine version for temperatures down to -5° C (only version without HMI touch panel) Other systems available immediately from the Ludwigsburg warehouse Illustration similar.

Condition: excellent (used), mileage: 137,672 km, power: 240 kW (326.31 HP), first registration: 11/2018, fuel type: diesel, tire size: 315/60 R 22.5, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,650 mm, loading space width: 2,300 mm, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, airbag, crane, differential lock, electric window regulation, electronic stability program (ESP), hill-start assist, parking heater, power assisted steering, power mirror, retarder, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - External thermometer - Heated mirrors - Passenger seat - Differential lock - Digital tachograph - Air conditioning - Air suspension - Particulate filter - Radio/CD player - Rearview camera - Side door - Lane departure warning system - Stability control - Auxiliary heater - Warming automatic system - Toolbox - Xenon lighting - Power take-off (PTO) - Towing hook = Additional Information = Transmission Lsdpoykt Ubjfx Ahvori Transmission: ALLISON, automatic Axle configuration Brakes: Disc brakes Front axle: Tire size: 315/60 R 22.5; Max. axle load: 7,500 kg; Steered; Tire tread left: 60%; Tire tread right: 60% Rear axle 1: Tire size: 295/60 R 22.5; Twin tires; Max. axle load: 11,500 kg; Tire tread inner left: 90%; Tire tread outer left: 90%; Tire tread inner right: 90%; Tire tread outer right: 90%; Reduction: single reduction; Suspension: air suspension Rear axle 2: Tire size: 315/60 R 22.5; Lift axle; Max. axle load: 7,500 kg; Steered; Tire tread left: 60%; Tire tread right: 60%; Suspension: air suspension Weights Unladen weight: 12,665 kg Payload: 13,835 kg Gross vehicle weight (GVW): 26,500 kg Functional Mast: Telescopic (4 sections) Bodywork brand: HIAB 111 ES-4 HiDuo ROEFS OPBOUW CE marking: yes Condition Technical condition: very good Visual condition: very good Identification Registration number: 41-BLN-6

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm Ljdpfx Asyktrtehvsri 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: new, overall weight: 400 kg, Uras 3-Head Large Format Printer Printing Machine 3 x 4720/3200i, 2400 dpi 3 Print Heads: 1800mm Thanks to the high-speed print heads featuring new technology, you achieve powerful results at low production costs with a print speed of 110 m²/hour in 2-pass mode. Highlights: - 3 x 4720/3200i Print Heads with 2400 dpi high resolution - 2-stage ink system (220 ml ink cartridge and 1.5 l ink tank) - Integrated housing heater, infrared heater, and fan system - Unwinding spindle to prevent paper bubbling - Printing up to 600 meters with tension rewinding system Lredpoq Rd Nujfx Ahvei - 2-pass mode (360x1200 dpi) 110 m²/hour Product Specifications: - Print Heads: Piezo print head, 3 units (3200i/4720) - Media: - Width: 1820mm - Thickness: 1 mm or less - Weight: up to 60kg - Max. print width: 1800mm - Color unit: 4 x 220 ml cartridges and 1.5 l color tank - Print resolution: 2400 dpi - Print modes: - 2 passes (360 x 1200 dpi): 110 m²/h - 3 passes (360 x 1800 dpi): 84 m²/h - 4 passes (720 x 1200 dpi): 74 m²/h - Media drying system: Integrated housing heaters, infrared heaters, and fan system - Interface: USB 3.0/LAN - Power specification: AC 220V ± 10%, 50/60 Hz - Dimensions: 3190 mm (L) x 650 mm (W) x 1030 mm (H) - Net weight: 400kg Condition: Display item, very few prints. All information provided without guarantee. Financing through our bank is also available. komplett-konzept.leasingo.de More printers in different sizes – new and used – can be found in our shop! International shipping rates on request!

Condition: good (used), Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Technical data Lsdpfsuzhcuex Ahveri Rated voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Nominal output: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse protection: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Flow: Flange SDIN2633 DIN100 PN16 Return flow: Flange SDIN2633 DIN100 PN16 Overflow / drain: 2” female thread Inlet well water: 2” female thread Well water drain: 2” female thread Adiabatic inlet: 3/4” female thread Filling: manual 3/4” female thread Water circuit Heat transfer medium: Water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank volume: 4000 liters Free cooler circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer circuit Pump type: (pressure booster system) Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 20-foot AIS-DSC-22-28 External dimensions mm (LxWxH) 6,058 x 2,438 x 2,591 Internal dimensions mm (LxWxH) 5,898 x 2,352 x 2,390 Internal floor area m2: 13.88 Control 2000 ME compact control unit Compact microprocessor control unit for infinitely variable control and cascade control of pumps with MGE motor with integrated frequency converter for demand-dependent, energy-optimized operation of multi-pump systems. With automatic activation and deactivation of the individual speed-controlled pumps by a digital controller adapted to centrifugal pumps. Grundfos R100 infrared manual control and diagnostic device for commissioning, data monitoring, reading out fault messages and configuring Grundfos pumps. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 Ledpfx Ahewbqrtsvjri RRP: € 29,006.25 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more new and used items in our store! International shipping costs on request!

Condition: used, Year of construction: 2016, operating hours: 60,546 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, nominal power (apparent): 40 kVA, torque: 96 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece width (max.): 850 mm, workpiece height (max.): 850 mm, workpiece diameter (max.): 720 mm, workpiece weight (max.): 800 kg, total height: 3,400 mm, total length: 6,300 mm, total width: 2,750 mm, table width: 500 mm, table length: 400 mm, rotational speed (max.): 16,000 rpm, overall weight: 10,000 kg, Machine make/type: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: SC63 16,000 rpm, 40 kW, 96 Nm Tool clamping system: SK40 Lsdsyglrqopfx Ahvsri Magazine / slots: Chain magazine / 240 positions Comfort operation terminal, main-time parallel setup Rotary table: 360,000° X 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 X 400 Workpiece clamping: Mechanical Additional options, features: Drill breakage control (SBBK); FMS interface, infrared probe receiver (Renishaw), extraction interface; coolant chiller

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climatic Cycle Test Chamber Weiss SC 1000/+20 JU Corrosion Climatic Cycle Test Chamber The test system is a combination of a climatic test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. At-risk metallic components are tested for corrosion in a time-lapse manner according to the relevant standards. Temperature Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Climatic Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Relative Humidity: 10...98 % RH Temperature variation over time: 3...5 % RH Dew point: +12 °C ... +59 °C Salt spray test SS (ambient temperature range +5 °C ... +50 °C) according to DIN 50 021 (salt spray via dual-fluid nozzle, 1.5 x 0.5 mV 80 cm h) Control Digital measurement and control system SIMCON/32*-Net with touchscreen control panel Interfaces - Serial interface RS 232 C - Parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Air conditioning mode - Salt spray test - Direct spraying with saline solution - Condensate load - Flushing test chamber walls - Drying/ventilating test chamber Ledpfsph U Dhjx Ahvjri Temperature sensor: Pt 100 resistance thermometer Humidity sensor: Psychrome fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions Height up to sloped roof approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test room door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch control panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Power rating: 13 kW Weight: 1300 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Showroom machine from the manufacturer! Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Calendar collating machine Type - MKW RAPID UT - System Belt conveyor table 16 - Number of stations B3 - Format 35 x 50 cm / 13.78" x 19.68" GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 16 stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - Sheet sizes 3.94" x 5.51" up to 13.78" x 19.68" - High-Pile version with max. 70 cm / 27.55" stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Clocked blown air for accurate sheet layering - Electronically adjustable sheet layering - Electronic machine control by Industry-PC system - High quality 15'' color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Delivery control system for criss-cross with adjustable set interval - Transport table lighting with LED-Lamps - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PC - Ejector unit inclusive additional station at the delivery AW 3 incl. Lrjdpfxeur Ih Ro Ahvji (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated ASS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - LED signal lights to visualise the information of each station SOFU-HIVIS incl. (enables simple status detection) Alternative to Jogger: 1 High-Pile delivery Type MKW RAPID HA 350-UT / PN + T-BELT - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Pneumatic drive unit for staggering of sets - Automatic delivery on to buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: excellent (used), Year of construction: 2017, operating hours: 150,050 h, functionality: fully functional, controller manufacturer: Heidenhain, controller model: iTNC530, rotary table diameter: 500 mm, overall weight: 13,000 kg, spindle speed (max.): 14,000 rpm, operating hours of spindle: 6,950 h, coolant supply: 20 bar, spindle nose: HSK 63, number of slots in tool magazine: 60, Equipment: chip conveyor, oil mist separator, rotational speed infinitely variable, • Condition: Excellent condition • Operating hours: 6,950 • KESSLER rotary table, Ø 500 mm • Tool magazine: 60 stations, HSK-A63 • Internal coolant supply: 20 bar, with band filter system • Coolant system: Automatic coolant level monitoring • Air through spindle Lsdpfx Ahjx Hg Ibjvsri • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe system), incl. workpiece measurement preparation • Collision monitoring: POS DCM module • Media feed: 3-channel media feed in the center of the table • Viewing: Rotary inspection window • Handwheel Please send us an inquiry directly via our website if you are interested in the machine. Due to technical reasons, direct inquiries for a quotation via third-party platforms are difficult and may be delayed.

Year of construction: 2026, condition: new, Pasteurizer-Filler Rocket is used for the pasteurization of juice and other liquid products and filling it to bottles or Bag in Box packaging. The machine has a built-in heating boiler. Inside of it there is a tubular heating spiral made from stainless steel. The liquid comes into the tubular spiral which is surrounded by hot water. The heat from the water heats up the liquid and eliminates the bacteria. If the boiler temperature rises more than set, an automatic temperature sensor turns off the heaters. Juice temperature is monitored manually. Capacity: 150 – 200 l/h Lodpfxsq Nlz Tj Ahveri Maximum heating temperature – 90 ºC. -A tubular spiral made of hygienic thin-walled stainless steel. -Spiral is integrated into the boiler which provides saving of space and prevention of heat loss when pumping the water into external heat exchanger. This saves the heating energy up to 15-20%. -Pasteurizer has an automatic water temperature control with a digital thermostat. -Safety sensors for dry run protection. Pasteurizer does not start until the water level is correct. -Easily interchangeable filling heads to Bag in Box or bottle. -Bag in Box filling table with scales for weight monitoring. -Bag in Box closing handle is moved by a spring – this ease the opening and closing process. -Automatic bottle filling – filling will stop when bottle is full. -Bottle filling table is adjustable according to bottle dimensions. -Manual juice temperature monitoring by digital thermometer. -Fast and easy cleaning.

Condition: excellent (used), Year of construction: 2003, Technical specifications: Working length: 4230 mm Distance between uprights: 3650 mm Pressing force: 170 t CNC control: AMADA Operator III graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 motorized adjustable backgauge Stroke: 400 mm automatic crowning Working height: 960 mm Ljdpeyi Ud Uofx Ahvsri Motor power: 16.5 kW CE marking Dimensions (length x width x height): approx. 4700 x 2200 x 2900 mm Weight: approx. 14.8 tons Accessories: automatic measurement of the workpiece bending angle with automatic correction in the control system lateral movable safety fences LAN network operation infrared light curtain at the front and rear Condition: Very good condition, only 9,000 operating hours The seller is not liable for typographical or data transmission errors. The machine is sold in accordance with its age, using, technical condition and wear; used machines are sold without any guarantee or warranty.

Condition: new, Year of construction: 2025, Professional machine for removing defects from wood and wooden elements. It optimizes the cutting process and ensures minimal material losses. The CROSS CUT 306 optimizer is a new technology of wood machines, produced by the leading brand on the Polish market, which is CNC Technologies. The machine provides fast, simple and precise cuts to size, increasing production efficiency. The optimizer performs cross-cutting of the material into sections of a specified length, eliminating material defects marked with a fluorescent pencil and using a sensor to analyze the position of the pencil. It is worth noting that the machine can measure and cut in an automatic cycle. Model: TechnologieCNC CROSS CUT 306-4M Effective machining length - 4000 mm (optionally 6 m) Effective machining width - 30-230 mm Effective machining thickness - 40-80 mm Effective machining in cross-section - 250x30mm Scanning speed - 80m/min Scanning device - Infrared sensor of the German brand SICK Lodjtvmv Rjpfx Ahvori Scanning/detection of defects - Fluorescent sensor of the German brand SICK Table height - 800mm Feed speed - 60m/min Pusher servo drive - AC DELTA 750w Saw lift servo drive - AC DELTA 1kW Cutting saw motor - 7.5kW, 3Ph, 2930 rpm. Saw blade diameter - fi 500 mm Extraction port diameter - 100mm x2 Total power: +-10kW Overall dimensions - 6750 x 1450 x 1800mm Transport dimensions: 535 x 80 x 110 - table, 200 x 100 x 160 - console Weight: 1436 kg

Condition: new, mileage: 10 km, power: 139.74 kW (189.99 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,325 mm, overall weight: 5,500 kg, first registration: 01/2026, emission class: euro6, color: black, suspension: steel-air, tire size: 205/75r16c, number of seats: 21, Year of construction: 2026, machine/vehicle number: 9-1911138-1, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, parking heater, parking sensors, power assisted steering, soot filter, summer tires, traction control, Minibus Mercedes Benz Sprinter 519 CDI HD Tourism - Euro 6 - 19+1+1 VIP Seats Engine output: 190 HP Euro VI 9G-TRONIC automatic transmission Metallic paint MB 9197 Obsidian Black Dimensions: 200 x 320 x 770 cm ABS, ESP, ASR, EBD Original MB third brake light Light sensor and Crosswind Assist Digital tachograph EC - VDO original MB Speed limiter 100 km/h original MB Rain sensor Pre-installation for retarder Cruise control Alternator 14 V / 250 A - original MB Multifunction steering wheel adjustable for height and tilt Pedestals under seats and raised rear row Rear air suspension Anti-corrosion underbody protection Doors and Windows: Electric glass door with recessed entry Luggage compartment hatch Large panoramic windscreen with electric sunblind High panorama double glazing, tinted Upper rear window Electric windows Electrically adjustable and heated exterior mirrors Luggage compartments and extensions: Lowered luggage compartment with hatch & side luggage compartments left and right Luggage compartment capacity 4.1 m³ Luggage compartment lighting Seats and Interior Features: 19 Bus Comfort 4020 VIP seats, adjustable (backrest + side), with Top Flair on the seat base and backrest, adjustable and foldable comfort headrests 2- and 3-point seatbelts Seat nets Tables with cup holders Footrests 5 double seats on left side 5 single seats on right side 4 seats in rear row Comfort swing driver’s seat original MB Tour guide seat Original MB armrest for driver’s seat Original MB seat heating for driver’s seat Original MB comfort headrest for driver’s seat Air Conditioning, Heating, and Lighting: Original MB parking heater 5 kW 2 convectors with booster pump & fans Original MB driver air conditioning 7 kW Ljdpfxow I Rvdj Ahvjri VIP service sets with reading lights and adjustable air vents Overhead compartments with climate ducts and lighting (2 colors) Passenger compartment air conditioning WEBASTO DIAVIA 15 kW LEDs in ceiling LEDs on entry steps LEDs on pedestals LED lighting between windows LED lighting under windows Interior Features: Interior trim + thermal and sound insulation for the passenger compartment Window trims Thermal and sound insulation Headlining in Alcantara Anti-slip PVC flooring in wood or marble look Grab rail behind driver Curtains Dashboard with graphic design Armrest refinements in graphic design Accessories and Interior Equipment: Radio CD, MP3, DVD player with microphone and amplifier MBUX multimedia system with 7-inch touchscreen Dynamic gooseneck microphone 19'' LCD monitor Reversing camera 12 dual USB sockets Dual USB socket for driver Refrigerator under dashboard Digital clock and thermometer Master switch for additional installations Accessories and Exterior Equipment: LED headlights Fog lights with cornering function Reverse warning system Chrome hubcaps Miscellaneous: COC Fire extinguisher Inscriptions, stickers, and markings MB service book Emergency exits/roof hatch as emergency exit Emergency hammers Available immediately

Condition: new, mileage: 300 km, power: 125.03 kW (169.99 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,325 mm, overall weight: 5,300 kg, first registration: 01/2026, fuel tank capacity: 71 l, emission class: euro6, color: black, suspension: steel, tire size: 205/75r16c, number of seats: 21, Year of construction: 2026, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, parking heater, parking sensors, power assisted steering, soot filter, summer tires, traction control, Minibus Mercedes Benz Sprinter 517 CDI Tourism - Euro 6 - 19+1+1 VIP Seats Sprinter 517 CDI Interior panelling plus thermal and acoustic insulation in the passenger compartment Digital EU tachograph with RPM and supplementary recorder Third brake light 9G-TRONIC automatic transmission Metallic paint MB 9197 Obsidian Black Painted side panels – plastic parts Cruise control Raised podiums under the seats and last seat row Doors and glazing: Electric glass door with recessed entry Large panoramic windscreen with electric sunblind Double-glazed, high panorama, tinted windows Windows in rear doors Electric windows Electrically adjustable and heated exterior mirrors Luggage compartment and extensions: Recessed luggage compartment Seats and interior fittings: 19 adjustable seats (backrest + width) with Top Flair seat and backrest upholstery, and comfort headrests All seats upholstered in synthetic leather Vertical grab handles on both sides 2- and 3-point safety belts 5 double seats on the left side 5 single seats on the right side 4 seats in the last row Original MB driver's seat Armrest for driver's seat Guide's seat Air conditioning, heating and lighting: Dehumidification and defrost function Original MB auxiliary heater 5 kW 2 convectors with booster pump & fans Original MB driver's air conditioning 7 kW VIP service sets with reading lamp and air vents Ledoyi Afaopfx Ahveri Overhead luggage racks with climate ducts and lighting (2 colours) WEBASTO DIAVIA 15 kW passenger compartment air conditioning LED ceiling lighting LED at entrance steps LED at podiums LED lighting between the windows LED lighting under the windows Interior features: Interior panelling and thermal/acoustic insulation in passenger compartment Window surrounds upholstered in synthetic leather Thermal and acoustic insulation Sidewall panelling in matching fabric to the seats Ceiling covered in Alcantara Anti-slip PVC flooring in wood or marble look Grab rail with partition behind the driver Curtains Dashboard with graphics Equipment and interior accessories: Radio CD, MP3, DVD player with microphone and amplifier 19'' LCD monitor Reversing camera 12 USB double sockets USB double socket for driver Refrigerator under dashboard Digital clock and thermometer Main switch for additional installations Equipment and exterior accessories: Reversing warning device Side skirts Chrome wheel covers Chrome exterior mirrors Front mud flaps, original MB Rear mud flaps, original MB Miscellaneous: COC document Fire extinguisher Inscriptions, decals and lettering MB service booklet Emergency exits / roof hatch as emergency exit Emergency hammers Immediately available

Condition: used, Year of construction: 2006, pressure 100 t chamfer lenght 3100 mm distance between columns 2550 mm column arm 400 mm table height 925 mm stroke 200 mm control Cybelec DNC 8805 output 11 kw total connected load 15 kW weight of the machine ca. 9,0 t range L-W-H 5,2 x 2,1 x 2,9 m Used CNC- press brake - some upper tooling (no lover tooling) - Infrared security device - documentation Ljdpow Rf Hijfx Ahvjri - hydraulic Crowning - 2 axis backgauge X + R

Condition: good (used), Year of construction: 2020, operating hours: 731 h, functionality: fully functional, machine/vehicle number: WSVT4H7RSL1500083, power: 55.16 kW (75.00 HP), first registration: 09/2020, fuel type: diesel, color: orange, tire size: 255/65 R16, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, Equipment: additional headlights, hydraulics, Model designation: Aebi Schmidt Multigo 150 Year of manufacture: 2020 Serial number: WSVT4H7RSL1500083 Tyres: Wide tyres 255/65 R16 Operating hours: 731 Application areas: Winter service, street cleaning, sidewalk cleaning, and more. - 40 km/h road speed - Front-mounted lift with hydraulic floating position control - Perkins 4-cylinder engine (75 hp) - ISRI air-suspended driver's seat - Heated side mirrors - Rear area monitoring with infrared night vision camera + monitor - Additional LED work lights - 1.5 m³ aluminium debris hopper with recirculating water system - Sweeper unit: 2-brush system (trailing) with suction shaft - 4 m hand suction hose - Stratos S 06 salt spreader (0.6 m³) - Spreading disc with adjustable spreading width from 2–6 m - Snow plough EN15 with 1.5 m working width - Trade-in and purchase of vehicles and machinery possible. - Sales price excludes transport and delivery. - No liability for printing & typographical errors. - Subject to errors, alterations, and prior sale. - Offer subject to change. - All information without guarantee. - No warranty for material defects on used vehicles/equipment. Henne Nutzfahrzeuge GmbH Authorized Mercedes-Benz Unimog general representative JCB sales and service partner Hans-Grade-Straße 2 04509 Wiedemar Marlon Schütz Sales municipal special equipment Lsdpoyilbnsfx Ahveri

Condition: used, Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly built disk laser optimized for demanding industrial metalworking applications. Machine type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204 No further testing was conducted in-house. Operating hours could not be read. The laser was operating flawlessly up until decommissioning. Features: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture - Ideal for a wide range of applications in the automotive industry, mechanical engineering, or surface processing Lsdpjwzabqefx Ahvsri Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (Infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (benchmark for exceptional quality), often with a range of 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on series) - Optional cooling: Water-cooled, e.g., via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical layout, efficient operation, power factor correction, energy-saving modes, PROFIenergy interface Typical Applications: - Laser welding (including hybrid or scanner-guided), e.g., for bodywork or gearboxes - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – professional industrial use Supply voltage: 380 V (-10%) to 460 V (+10%), 3-phase AC + PE Frequency: 50 – 60 Hz Power consumption: 22 kW / 23 kVA Rated current: 325 A at 400 V Protection class: IP54 Short-circuit resistance: Icn / SCCR 50 kA Weight: 850 kg Condition: Used Scope of delivery: (See images) (Specifications subject to change and errors excepted!) Should you have any further questions, feel free to contact us by phone.

Condition: used, Trumpf Trumpf TruDisk 4002 (6 C) High-Power Solid-State Disk Laser with up to 4 kW The Trumpf TruDisk 4002 (6 C) is a state-of-the-art, efficient, and robustly engineered disk laser optimized for demanding industrial metalworking applications. Lrjdpfxjwzaiuo Ahvei System type: TruDisk 4002 (6 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: March 2016 Drawing number: 20-10-03-A204* No further in-house inspection was performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. It offers: - Top performance (up to 4 kW) - Excellent beam quality - Reliability & reflection safety - Energy-efficient, modular architecture Ideal for diverse applications in the automotive industry, mechanical engineering, or surface processing. Technical Highlights: - Power: From 80 W up to max. 4000 W in continuous operation (CW) - Wavelength: Approx. 1030 nm (infrared, Yb:YAG) - Beam quality: Up to 2 mm·mrad (a benchmark for excellent quality), typically ranging from 2–25 mm·mrad - Output options: Modular configuration – up to 4 outputs possible (depending on model) - Optional cooling: Water-cooled, e.g. via KLH chiller or integrated heat exchanger/compressor - Modular design: Robust optical configuration, efficient operation, power factor correction, energy-saving modes, PROFIenergy connectivity Typical applications: - Laser welding (also hybrid or scanner-controlled), e.g. bodywork or gear assemblies - Cutting / flame cutting of metals with high precision - Surface processing, coating applications, etc. – for professional industrial use Supply voltage: - 380 V (-10%) to 460 V (+10%), 3-phase + PE - Frequency: 50 – 60 Hz - Power consumption: 22 kW / 23 kVA - Rated current: 32.5 A at 400 V - Protection class: IP 54 - Short-circuit strength: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of supply: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions for you by phone.

Condition: excellent (used), Eos Ledpfx Ahsxw Uyqevori EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Year of construction: 2025, condition: new, The IPW 100 tank pasteurizer is ideal for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), and pickled fruits and vegetables. The packaging must be heat-resistant, for example, made of glass or a heat-resistant plastic bag. The exact temperature and duration of the heat treatment depend on the specific product. It is operated manually. The tank is not insulated. • Very user-friendly • Includes baskets for bottles and jars • Automatic temperature control • Made entirely of stainless steel (WNr. 1.4301) Lodpev Srabjfx Ahvori Technical information Capacity: 100 L/h Power requirement: 9 kW, 400 V, 16 A Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control box Thermometers: 1 pc. Dimensions: Length: 1170 mm Width: 530 mm Height: 870 mm Weight: 75 kg

Year of construction: 2025, condition: new, The IPW 200 tank pasteurizer is suitable for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), and pickled fruits and vegetables. The packaging must be heat-resistant, e.g., made of glass or a heat-resistant plastic bag. The exact heat treatment technology, temperature, and duration depend on the specific product. Operation is manual. The tank is not insulated. • Very user-friendly • Includes baskets for bottles and jars • Automatic temperature control • Made entirely of stainless steel (WNr. 1.4301) Technical information Capacity: 200 L/h Lsdpfx Aev Srblshvori Power requirement: 12 kW, 400 V, 20 A Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control box Thermometers: 1 pc. Dimensions: Length: 1420 mm Width: 600 mm Height: 880 mm Weight: 130 kg