Used Infrared Thermometer for sale (371)

Condition: used, maximum load weight: 12,200 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,240 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, loading space volume: 43 m³, total length: 7,450 mm, total width: 2,600 mm, total height: 2,720 mm, Year of construction: 2016, Vehicle No. G0123006_1 – Manufacturer: Schmitz. * Floor: Aluminum floor * Double-deck configuration * Simple corner fittings * Rear door design: Rear portal doors * Contour marking, side/rear * Refrigeration unit Fpedpfx Akoz H Hfhoyen * Loading beams * Portal door with double twist-lock closures (external) * Forklift accessible * Front wall niche * Telescopic support legs * Temperature recorder * Temperature recorder * Locking rods on rear doors: 2 * Device for rail loading * Lashing points * ATP certificate – new. External thermometer / analog. Leakage test – new. Double-deck configuration without double-deck loading beams (available at an extra cost!). Financing available upon request. Financing possible. Flat fuel tank 60 L / Note: Flat tank extends the box!. Rear portal / portal door with simple twist-lock closures / external, made of stainless steel. Delivery time: IMMEDIATELY. Portal door with double twist-lock closures (external). Solar panel for monitoring start-up voltage – new. Technically ready for use, no further repairs required. Partial paint job. Temperature recorder / DATACOLD incl. printer. Temperature recorder test – new. Test run down to -18° C – ok!. Undercarriage galvanized. Valid safety inspection certificate. Safety inspection documents available. PAINT – NEW!!!. Available in multiple units!. Dimensions are approximate. Offer subject to change; sale is subject to prior sale. Prices are net ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis OPS INGERSOLL Eagle V9 was manufactured in 2014. It features a robust double gantry drive, a maximum travel speed of 45 m/min, and a powerful HF-Spindle with speeds up to 18,000 rpm. The machine is equipped with a 48-fold tool changer and supports 5-axis simultaneous machining. If you are looking to get high-quality machining capabilities, consider the OPS INGERSOLL Eagle V9 vertical machining centre we have for sale. Contact us for further details. - Machine Structure: Double gantry drive in X and Y axes, vibration-damping polymer concrete bed with foundation-free 3-point setup- X-Axis Travel: 800 mm- Y-Axis Travel: 600 mm- Z-Axis Travel: 500 mm- B-Axis Travel: 140° / 60°- C-Axis Travel: 360°- B-Axis Speed: 25 rpm- C-Axis Speed: 100 rpm- Max. Rapid Traverse Speed: 45 m/min- Max. Acceleration: 10 m/s²- Spindle 1 (Standard): High-frequency spindle HSK-A63, 35 kW power, 1 to 18,000 rpm, 83 Nm torque- Spindle 1 Tool Changer: HSK-A63, 48-fold- Spindle 2 (Optional Option 5): High-frequency spindle HSK-E50, 17 kW power, 1 to 36,000 rpm- Spindle 2 Tool Changer: HSK-E50, 72-fold- Control System: HEIDENHAIN iTNC 530 HSCi- Table Type: T-slot table (replaced by 4th/5th axis unit if option configured)- 4th/5th Axis Workpiece Capacity: 500 mm diameter x 500 mm height, max weight 250 kg- Precision Package 1: Heat exchanger circuit +/- 0.1°C and drive cooling- Precision Package 2: Position and geometry error compensation X/Y/Z axes- Precision Package 3 (5-Axis Option): ATDC (Automated Temperature Drift Control), 5-axis compensation, Heidenhain KinematicsOpt with calibration sphere- Tool Measurement: Blum laser system for tool breakage control and tool length/diameter compensation- Workpiece Measurement: Infrared touch probe Renishaw- Lubrication: Minimum quantity lubrication (external spindle), automatic central lubrication for spindle, drive, and guide system- Automation / Handling System (Option 13): Handling system IMC5 MultiChange light (Year 2004) mounted on right side, RCS standard gripper, 8-fold workpiece magazine- Electrode Magazine (Option 14): Double electrode magazine Erowa ITS (154-fold)- Additional Features:chip boxautomatic cutter cleaning with spray agentHR410 handwheel Technical Specification Taper Size HSK 63 Fjdpfx Akjz Ngbpsyopn

Condition: used, Year of construction: 2022, functionality: fully functional, Equipment: CE marking, Machine is USED, excellent condition, first owner. Fpedjzv Tibopfx Akyen Machine can be packed and ready for transport from Sellers warehouse in Croatia witihn 5 days after order confirmation ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - Electronic positioning of top presser - Panel spacer on infeed fence - "Nesting" copying device kit - "AAR" anti-adhesive unit - Spray-mist device for edge finishing - Spray-mist device for delicate edges - RC-N glue scraping unit - "SP-V" brushing unit 1 - "EASY SIZE" device - Infrared ceramic lamp - Gluing unit with pre-melting device - "SGP" glue pot with automatic dosing by NC in substitution of the standard one - Diamond tools for pre-milling unit h=64-no.2 knives TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 01/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Fpedpfjzypv Sex Akyen Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 8 mm Front right - 7 mm Middle left - 13 mm Middle right - 13 mm Rear left - 6 mm Rear right - 6 mm

Year of construction: 2010, condition: ready for operation (used), travel distance X-axis: 120 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 200 mm, controller manufacturer: SIEMENS, controller model: 840D SL, number of axes: 5, This 5-axis DMG ULTRASONIC 10/ DENTAL 10 was manufactured in 2010, featuring a universal machining center with X/Y/Z travels of 120/120/200 mm. It includes a rotating CNC table, work spindle with HSK-E 32 attachment, and a maximum rotation speed of 40,000 rpm. The machine also boasts an automatic tool changer with 16 stations and Siemens 840D control system. If you are looking to get high-quality milling capabilities, consider the DMG ULTRASONIC 10/ DENTAL 10 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • A axis: swivel -10° to 120°, max. Rotation speed 100 rpm • C axis: 360° rotation, max. Rotation speed 150 rpm Fedpfx Ajzx Rpdekyjpn • Automatic pick-up tool changer with 16 stations for hsk-e 32 clamps • Spindle attachments: hsk-e 32 • External coolant tank: 80 l with 2 bar pump • Infrared workpiece measurement: dmg powerprobe 400 • Ethernet interface preparation • Laser tool measurement with renishaw nc-4 iii • 3d quickset tool kit • Automatic feed system: ph 2|4 basic system Extra Information Control: Siemens 840D solutionline Table Diameter: 190 mm Integrated Quick Clamping System: EROWA ITS 100 Coolant Treatment and Oil Mist Extraction Systems Installed Electronic Handwheel and Machine Data Management DMG Powertools Pre-installed

Condition: excellent (used), Year of construction: 2014, 5-axis machining center Brand: DMG MORI Type: DMF DMU 75 Monoblock Year: 2014 CNC: Heidenhain iTNC530 Equipped with: Integrated rotary table, dia. 600mm / 600kg 35 kW spindle – 18,000 rpm 60-position tool changer TS 649 probe 3D quickset Center coolant system, 40 bar 600l coolant tank with paper filtration Infrared tool probe Coolant gun Chip conveyor Specifications: Fpsdpfx Akjz E R D Ssyjn Table surface 800 x 650 mm (dia 600 inclinable) X-axis travel 750 mm Y-axis travel 650 mm Z-axis travel 560 mm B-axis -/+120° C-axis 360,000° Spindle speed 2 - 18,000 rpm Spindle power 35 KW Spindle taper SK 40 Rapid traverse XYZ 40 m/min Machine dimensions approx. 3200 x 2600 x H 2900 mm Weight approx. 11,600 kg

Condition: used, functionality: fully functional, first registration: 11/2011, fuel type: diesel, color: orange, fuel: diesel, gearing type: automatic, suspension: steel, Year of construction: 2011, operating hours: 2,024 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Holder C270 Drive system 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four pre-selectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, can be switched on simultaneously electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heating High roof Heat-insulating glazing and sliding windows on the sides Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Fodpfozdkc Uex Akyepn Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional equipment Mounting frame for tool-free switching between platform and attachments Locking rail at the front for adjusting the upper link Electrical system: AC alternator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio: wiring harness, antenna, speaker covers Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Wiring prepared for rear marker light via Super-Seal plug Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage including safety hook, CAT II/CAT I with passive tilt adjustment Rotating beacon Locking bracket Hydraulic flow divider 1 Flow divider, circuit 1, adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, attachment control pump Attachment control pump, 0–80 l/min, variable Line set to the front and rear Return line to the front and rear Leakage oil line to the front and rear Hydraulic tipping device for implement arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, connected to the front via a T-piece with quick-release couplings Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction switch and speed control Comfort package Driver's seat with air suspension, armrest, air conditioning Hydraulic tipping device for cab Rear view camera 2 work lights at the rear Ball head, permanently mounted 1 NEW DIESEL ENGINE KUBOTA WITH 12 MONTHS FACTORY WARRANTY!!! In addition, the following options are available at an extra charge: 1. PRICE INCREASE PLATFORM, DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750 plus VAT 2. PRICE INCREASE TOWING HITCH, NOT SELF-ADJUSTING, HEIGHT ADJUSTABLE, DEMO UNIT €470 plus VAT 3. PRICE INCREASE Retrofitting manual central lubrication system €1,600 plus VAT 4. PRICE INCREASE HYDRAULIC REAR PTO €1,990 plus VAT Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: HEIDENHAIN TNC 640 CELOS, rotational speed (min.): 20 rpm, rotational speed (max.): 10,000 rpm, DMG MORI DMF 360|11 linear – Traveling Column Milling Machine For sale is a DMG MORI DMF 360|11 linear with extensive equipment and a HEIDENHAIN TNC 640 / CELOS control system. Technical data Fodezv Eglepfx Akyjpn Travel ranges X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Rapid traverse rate X/Y/Z: 80 / 60 / 60 m/min Linear drive in the X-axis Milling head / Spindle NC swivel milling head, B-axis Spindle speed: 20 – 10,000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool holder: SK50 / DIN ISO 7388-1-A50 Tool magazine 120 tool positions Chain magazine with dual gripper Mechanical setup aid for tool loading Work table Fixed table with integrated rotary table Rotary table: Ø 1,050 mm Rotary table arranged on the left side Max. load capacity of rotary table: 1,200 kg Hydraulic clamping Control system HEIDENHAIN TNC 640 CELOS 21.5" ERGOline® Control Multi-touch screen Equipment / Options Internal coolant supply 40 bar / 980 l Paper band filter Chip conveyor HEIDENHAIN TS 460 infrared measuring probe Preparation and software option for 3D quickSET MPC – Machine Protection Control Compressed air through the spindle center Oil and emulsion mist extraction system, 2 × 1,600 m³/h 2 rotating viewing windows Purge air for linear measuring systems Direct measuring systems Active cooling for main spindle and linear motor Automatic door drive Electronic handwheel IoTconnector Machine Data Connector (OPC UA / MTConnect / MQTT) NETservice Machine can be inspected by arrangement. Further information, photos and videos available on request.

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Fsdpoz Ipn Iefx Akyepn Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: like new (used), Year of construction: 2020, functionality: fully functional, GMP Roller Laminator EXCELAM-II 355 Q Working width 355 mm, hot lamination Laminator for hot lamination films from 32 - 175 microns Infrared-heated silicone rollers, ensuring scratch-free lamination Fsdpfszwwqljx Akyepn Equipped with an 8-bit microprocessor LCD display and electronic reverse function, standby function Temperature adjustable from 0-160 °C in 1°C increments Temperature and speed settings are pre-programmed for each film thickness The roller pressure can be precisely adjusted for each film thickness using a scale disc Max. passage height: 5 mm Adapter for 25 mm core diameter Working speed: 0-1.6 m/min, adjustable in 9 steps Connection: 220 V / 50 Hz / 1300 Watts Dimensions: W546 x D456 x H285 mm Weight: 25 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 26,800 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Deckel Maho DMC 850V Machining Center Technical Data CNC Control: Siemens 840 Ergoline Fpjdpfx Akoz Ayhweyon Travel in X-axis mm: 850 Travel in Y-axis mm: 520 Travel in Z-axis mm: 475 Feed rates m/min: 42 Max. Spindle speed rpm: 14,000 Coolant supply through the spindle bar: 20 Tool holder: SK 40 Magazine: 30 Chip conveyor Tank capacity liters: 600 Infrared probe Tool measurement TT140 Internal coolant supply Flushing gun Direct XYZ measuring system Operating hours: 26,600 h Spindle operating hours: 11,000 h Base machine: Dimensions/Weight L/W/H mm: 3,600 x 2,300 x 2,700 Weight kg: 5,750

Condition: used, Year of construction: 2018, Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: empty bottle inspector - Year of manufacture: 2018 - Application: inspection of empty bottles prior to filling; neck ring detection for returnable PET containers included - Inspection modules: base inspection, sealing surface inspection, screw thread inspection (cone optics), sidewall inspection - Sidewall inspection: 2 modules with 4 mirror assemblies and 4 cameras, two views per camera at 45° - Residual liquid and caustic detection: high frequency and infrared - Additional detection: polarising transparent films at container base and sidewall, glass fragments at the container base, scuffing via sidewall camera - Foreign bottle detection at the infeed: container height, contour and colour via camera - Rejection: 3 x Ecopush - foreign containers at the infeed, dirty containers and damaged containers at the discharge - Control: Krones iPanel CD operator terminal, prepared for data connection to a single-station PC (Datalyser) Fsdozy Ud Ispfx Akyjpn - Test bottle programme with 2D code - Conveyor height: 1,200 mm, adjustment range 1,155 - 1,315 mm - Minimum required room height: 2,810 mm - Overall dimensions: approx. 6,700 x 1,300 x H 2,800 mm - Direction of operation: right-left machine - Power supply: 400 / 230 V, 3/N/PE, 50 Hz, 6 A full load current, 20 A pre-fuse; auxiliary supply 230 V, 1/N/PE, 5 A - Standards: IEC 61439-1 / IEC 60204-1, CE marked - Machine base and housing: stainless steel (AISI 304 equivalent), clean design Equipment - DualFlash neck finish lighting, separate inspection of outer and inner sealing surface - Combined thread inspection via the sidewall mirror assembly - Fallen container detection in front of the machine (photoelectric sensors with infeed pusher) - Base blow-off unit with clocked air nozzle for foam and lubricant residues - Container blower at the infeed, conveyor dead plate (3-fold) - Servo-driven collection module for rejected containers at the discharge - Festo pneumatic system with maintenance unit, food-grade lubricants - Emergency mode: passage operation without inspection - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2014, functionality: fully functional, Milling swivel head: - with torque motor and hydraulic clamping - Swivel range +30/-120°, stepless - 14,000 RPM - 160 Nm torque - Drive power 29 kW - Separate spindle cooling for constant temperature - Tool holder DIN SK40 with air blow-out function Integrated rotary table: - with torque motor and hydraulic clamping - Ø 610 mm - Extended clamping area 1,100 x 610 mm General: - 40-position tool changer with dual-arm gripper - Coolant and compressed air gun - Chip conveyor - Coolant system - Electronic handwheel - Work area light Control system: Heidenhain iTnc 530 SmarT.NC HSCI Fedpszzp E Nefx Akyjpn - 15.1'' TFT screen - Ethernet interface - 2x USB port - SmarT.NC-guided programming - Plain text programming - Short sentence processing time - Create a new program while another is being processed - Proven Heidenhain machining cycles - CE certification Options: - Internal cooling system (IKZ), 40 bar, including band filter system - Heidenhain TS640 for DIN SK40 workpiece probing system with infrared transmission - Heidenhain software option 40: DCM Dynamic Collision Monitoring for iTNC 530 - Heidenhain KinematicsOpt incl. Heidenhain calibration sphere KKH 250

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, total length: 3,000 mm, total width: 3,190 mm, total height: 1,700 mm, overall weight: 900 kg, Equipment: documentation/manual, 2020 HEBBECKER S-Line Automatic Carousel Screen Printing Machine with 2 Flash Stations Professional automatic carousel screen printing machine manufactured by HEBBECKER, designed for high-volume textile printing operations requiring precision, stability, and production efficiency. The machine is part of the HEBBECKER S-Line industrial series and offers reliable automated performance for professional textile and industrial printing applications. Built with robust industrial components and advanced servo-controlled technology, it ensures consistent print quality and optimized production workflow. Technical Specifications Manufacturer: HEBBECKER Model: S-Line Year of manufacture: 2020 Machine type: Automatic Carousel Screen Printing Machine Configuration: 4 Colors / 8 Stations Control system: Siemens touchscreen interface Drive system: Servo-controlled printing technology Application: Textile and industrial screen printing Advanced Technical Features AC Servo high-precision drive system Frequency-controlled pallet drive 4-cylinder POWER squeegee system Siemens SMART touchscreen control panel Microprocessor control with diagnostic system 6 integrated standard printing programs MULTIflash production mode High-density printing mode Cool-stop function Sampling mode for test production Start-up and finishing production programs Screen cleaning mode Free-wheel pallet positioning mode Aluminium sandwich pallets Stable high-speed indexing system Designed for high-volume industrial textile printing Printing Capacity 4 Colors / 8 Stations configuration Maximum print size: 400 × 450 mm Heavy-duty industrial construction Optimized for continuous production environments Included Equipment 2 x Industrial Flash Drying Units Adjustable height drying systems Efficient infrared curing support Suitable for multi-color textile production Fpedpfx Akey Tywveysn 2 x sets of original Hebbecker pallets in excellent condition. 2 x laser guide systems. Condition Machine in excellent working condition Used in the past 2 years for only a few hours per week. Fully operational Regularly maintained Packaging and installation available upon request.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,000 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530 HSCI, table load: 1,000 kg, overall weight: 5,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis Avia VMC 1000 was manufactured in 2017. It features a generous X-axis travel of 1000 mm, Y-axis travel of 540 mm, and Z-axis travel of 620 mm. The machine is equipped with a robust table size of 1200 x 540 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Avia VMC 1000 vertical machining centre we have for sale. Contact us for further details. • Table size: 1200 x 540 mm • Spindle-to-table distance (min/max): 150 / 770 mm • Working feed: 0–35 m/min • Rapid traverse (X/Y/Z): 35 / 35 / 35 m/min • Spindle motor power (S1 100% / S6 25%): 10 / 17 kW • Condition: Machine in top condition with very low hours Fsdpjzcyx Rjfx Akyspn Additional equipment • Spindle through-coolant, 20 bar • 4th axis preparation with 200 mm table, base, and 3-jaw chuck • Heidenhain TS 640 infrared workpiece probe • Heidenhain TT 160 tool probe • Oil mist collector (Mistresa, Japan) • Tool cooling with compressed air, 5 bar • Coolant oil separator Technical Specification Taper Size ISO 40

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) Fpedpfx Akszc N Axeyen TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, MACHINE BUILT 2008 / COMPLETELY REFURBISHED 2026 Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Type - MKW RAPID UT - System Belt conveyor table 10 - Number of stations Special - Format 35 x 64 cm GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 10 stations Belt-Conveyor-Table Fpedpsz Iydyefx Akyen - Sheet sizes 10 x 14 cm up to 35 x 64 cm - High-Pile version with max. 70 cm stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Blown air for accurate sheet layering - Adjustable sheet layering - Electronic machine control by Industry-PC system - High quality color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PolyC. - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated DSS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - Hand feeding station at left side HV 3 (incl. automatic station-control in case of operating error) Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: excellent (used), Year of construction: 2024, operating hours: 1,080 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, torque: 120 Nm, controller manufacturer: Heidenhain, controller model: TNC640, total height: 3,000 mm, total length: 3,600 mm, total width: 3,000 mm, table load: 300 kg, rotary table diameter: 650 mm, rotational speed (max.): 25 rpm, overall weight: 9,800 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 700 h, coolant supply: 30 bar, spindle motor power: 23,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, The machine was used as a bridging machine because the customer ordered an MT EVO UDS80. This is already his second one. UDS65-5A 5-axis universal machining center with Rotary table with Heidenhain TNC640 - 12,000 rpm hybrid bearing direct drive, water-cooled - Torque 120 Nm (25% ED) - Drive power 23 kW (25% ED) - Separate spindle cooling for constant temperature - Tool holder DIN SK40 with blow-out function Rotary table: - Ø 650 mm Fodpfxszwkwls Akyspn - Direct measuring systems in C and A axes General: - 48-position tool changer with dual-arm gripper - Travel ranges X/Y/Z: 620/520/460 mm - Coolant and compressed air gun - Chip conveyor as a scraper conveyor - Coolant system - Electronic handwheel - Work area light IKZ, 30 bar, including paper band filter Heidenhain TS460 for SK40, Workpiece probing system with radio and infrared transmission Heidenhain TT460, tool probing system with radio and infrared transmission for tool measurement Heidenhain KinematicsOpt #48 Machine cover that can be opened, mechanically operated Incl. a large number of – approx. 100 – SK40 holders.

Condition: good (used), SEAL AquaSEAL SW 3300 — Liquid Laminator The AquaSEAL SW 3300 applies water-based protective coatings to wide-format digital prints, including banners, billboards, vehicle graphics and truck curtain sides. It applies, smooths and dries the coating, providing protection against water, abrasion, UV exposure and chemicals when used with suitable AquaSEAL liquid laminates. Automatic infrared curing with Accucure Feedback control. Segmented heaters for processing narrower materials. Roll-fed or fan-folded operation. Fjdpfx Aoz Ndtnekyspn Multiple-roll handling capability. Variable speed and touch-sensitive control panel. Non-stick coated parts for easier cleaning. Technical specification Maximum coating width: 3,300 mm Maximum processing speed: Up to 3 m/min, depending on material and Meyer bar Dimensions (W × D × H): 4,000 × 1,200 × 1,100 mm Machine weight: 816 kg Electrical requirements: 3N/PE, 208–240 V, 50/60 Hz, 26 A per phase Compressed air requirements: 90–125 psi Material feeding: Roll-fed or fan-folded Standard coating bar: Smooth bar

Condition: like new (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, feed rate X-axis: 42 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece height (max.): 800 mm, workpiece weight (max.): 1,000 kg, total height: 2,700 mm, total length: 3,600 mm, total width: 2,300 mm, table width: 1,100 mm, table height: 570 mm, overall weight: 5,750 kg, spindle speed (min.): 14,000 rpm, spindle motor power: 15 W, Equipment: chip conveyor, CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 850 Y-axis travel mm: 520 Z-axis travel mm: 475 Feed rates m/min: 42 Rapid traverse m/min: 42 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 1100x570 Maximum workpiece size (D x H) mm: H=800mm Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 20,3/14,5 (40/100%ED) Cooling Cooling through the Spindle Center bar: 20 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 20 Fedoznniaopfx Akyepn With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5.7 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Direct measuring system XYZ Paper band filter Machine running times Under power: --- Spindle Working: ----- Rated power kVA: 19 Basic machine dimensions / weight Length mm: 3600 Width mm: 2300 Height mm: 2700 Weight kg: 5750

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Kilia 325 Liter Cutter 5000 Express – Factory overhauled 2025 Powerful high-performance cutter system with extensive general overhaul – ready for continuous use in professional food processing Top Features & Highlights: Overhauled in 2025 – numerous main components newly installed: Vacuum pump Base plate Main motor & plate motor Knife shaft incl. bearing Electronic control incl. new control cabinet (stainless steel) Frequency converter Hydraulic cylinder & unit Ejector motor & bearing Feeder motor & bearing Electronic control panel with 10-inch touch panel & joysticks All scrapers Technical equipment: Robust stainless steel design (machine & bowl) High-performance knife shaft drive, infinitely variable from 50–4000 rpm, with reverse (50–500 rpm) Knife shaft drive power: 81 kW, bowl: 3 kW (400 V, 50 Hz) Hydraulically operated noise protection cover (double-walled, stainless steel) Fully automatic ejector (hydraulic) Maintenance-free knife shaft system Automatic central lubrication (ADS 100) Knife shaft brake (electric) 6-knife set Knecht K24 Thermometer & tachometer with end shut-off (electronic) Hydraulic knife tension nut Loading system for 200-liter trolleys (hydraulic) Vacuum function for highest product quality Integrated maintenance and inspection module Remote diagnosis via encrypted internet connection (broadband required) Separate stainless steel control cabinet (wall-mountable) Manual or automatic water addition Fjdjyk Tuuepfx Akyjpn

Condition: good (used), Year of construction: 2008, operating hours: 333 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 3,000 rpm, table width: 850 mm, table load: 5,000 kg, table length: 2,200 mm, mount diameter: 400 mm, table height: 810 mm, spindle motor power: 38,000 W, Anayak Performer 2000 in top condition Demonstration machine with only 333 operating hours Complete maintenance and repairs performed by the professionals at GSN Maschinen-Anlagen-Service GmbH (formerly WMS Kaiser) Control system: Heidenhain ITNC530 Handwheel: 410 Travel distances X/Y/Z: 2000/1000/1100 mm Sliding table clamping area 2200x850 mm Working height: 810 mm Table load capacity: 5,000 kg T-slots 5x T22, spacing 150 mm Rotary table: Spirsin 81260F, fully integrated into the control system Diameter 400 mm Can be used horizontally or vertically Includes manual tailstock Fjdpjzzw N Ajfx Akyspn Turret: Automatically pivoting universal turret Revolutions max. 3000 rpm Tool holder SK50 Additional equipment / options: Infrared measuring probe Heidenhain Compressed air for external cooling

Year of construction: 2012, condition: used, film width: 450 mm, roll width: 500 mm, machine/vehicle number: BA-18609, Equipment: CE marking, Coating Line Used for coating of battery electrodes - Roll width 500 mm - max. Web width 450 mm - max. Coating width 400 mm - Web speed 0.1-5 m/min - Various substrate films such as copper, aluminium, PET and PES - Doctor blade & slot die coating Fpodpfezzpqrjx Akysn - Web guide system - Corona pre-treatment - integrated x-Ray areal weight measurement - 1x infrared oven - 2x convection oven Length coater: 14 m The buyer is responsible for the proper disassembly and pickup of the machinery.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya10, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. Fedsz Ipunjpfx Akyepn MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climate Cycle Test Chamber Weiss SC 1000/+20 IU Corrosion Climate Cycle Test Chamber The test system is a combination of a climate testing chamber with variable temperature and humidity and a corrosion testing chamber with a salt spray test. In a time-lapse mode, vulnerable metallic components are tested for corrosion according to the relevant standards. Temperature operating range: Temperature: +20 °C ... +60 °C Time-dependent temperature deviation: +0.5 K Climate operating range: Temperature: +20 °C ... +60 °C Time-dependent temperature deviation: +0.5 K Relative humidity: 10...98 % RH Time-dependent humidity deviation: 3...5 % RH Dew point: +12 °C ... +59 °C Salt spray test SS (temperature range: ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt spray with a two-nozzle system, 1.5 x 0.5 mV80 cm? h) Control: Digital measuring and control system SIMCON/32*-Net with touch panel Interfaces: serial interface RS 232 C, parallel printer interface Operating modes adjustable via process controller: - Temperature control - Climate control - Salt spray test - Direct spraying with salt solution - Condensation load - Flushing of test chamber walls - Drying/ventilating the test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: psychrometric fresh measuring system tft’ (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions: Height up to roof slope approx. 1000 mm + Roof approx. 350 mm Width approx. 1100 mm Width between the heaters approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, left-hinged Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Fjdpfxsph U Dhj Akyspn Width approx. 1450 mm Width with touch panel approx. 1700 mm Depth approx. 2600 mm Maximum floor load: 100 kg Brine storage tank: approx. 200 l, with level monitoring, located separately to the side/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Connected power: 13 kW Weight: 1300 kg You can find more items - new and used - in our shop! International shipping costs on request!