Used Infrared Paint Dryer for sale (6,717)

Condition: used, Used Aeromatic model MP1 stainless steel fluid bed dryer. Stainless steel filter chamber approximately 16 litre capacity with a maximum product volume of 13.5 litre which is hinge mounted and removeable. Operating pressure is 6 bar. Driven by a 3.3kw 3/50 supply. Reportedly minimum batch weight 400g and maximum batch weight 6 kg. Dwedsxyxkxopfx Ab Tef

Condition: ready for operation (used), Year of construction: 2016, Parker Hiross Starlette Plus-E SPE080 Refrigeration Air Dryer | 230V | 1.62 kW Industrial-grade equipment for efficient compressed air drying in pneumatic systems. Compact, energy-efficient, ready for operation. ● Model: SPE080-A2301DF14EXS ● Power supply: 230 V / 1 phase / 50–60 Hz ● Power consumption: 1.62 kW ● Current: 7.68 A ● Refrigerant: R134a (0.6 kg) ● Oil: ISO VG46 Ester ● Operating temperature range: 5–50°C ● Max. air temperature: 65°C ● Max. pressure: 14 bar * Air flow : 8 m³/min, 480 m³/h Dwedjvkubxjpfx Ab Tsf Product from Parker Hiross – an Italian brand owned by Parker Hannifin, a leader in flow control and pneumatics.

Condition: like new (used), functionality: fully functional, operating hours: 2 h, IR tunnel dryer (electric dryer) with quartz tube, width: 90 cm, heated section 240 cm, max. temperature 200° C, 32 A plug. The unit is in like-new condition, only used 1-2 times for demonstration purposes. The original price is €10,500 net. The dryer is located at our company hall in Bruchweiler-Bärenbach and can be inspected and tested at any time. Dwjdpfx Aow N Rw Dob Tjf

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC Dwjdpfx Abjwp Rqfe Tof The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: used, Serial number: 24-0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21860 Dwsdpfxsxypqcj Ab Tof Description: We have a Pitsan ER80 paint filter for sale. This is used for larger painting/varnishing projects to provide better ventilation. Ready for delivery Own weight: 1 Model: ER80 malefilter

Condition: as good as new (ex-display), Year of construction: 2025, The captivating advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working climate due to diagonal low-turbulence air flow. Large airflow window due to air baffles - therefore also suitable for larger workpieces. Separation efficiency of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² - therefore long filter life! Easy and quick filter change on the front side. Inexpensive replacement filters. Low purchase costs and extremely low energy consumption. Dry splashboard made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fibre filter as after-filter unit. Ex-fan incl. throttle valve mounted on the left. Dwjdpfecnz Iqsx Ab Tsf Do not compromise on the quality of the surface. Easy Paint extraction walls are the ideal cost-effective solution for effective collection and filtering of paint mist and extraction of solvent vapours. Robust and powerful but economical in consumption. The IPE double filtration system provides two filter stages for a maximum separation efficiency of up to 99 %. The cardboard labyrinth filter initially absorbs considerably more overspray (up to 18 kg/m² filter surface) than conventional filter mats due to the folded filter pockets. The downstream glass fibre secondary filter absorbs only the finest residual particles. As a guide value, the cardboard labyrinth filter, depending on

Year of construction: 2016, condition: excellent (used), PIOVAN Dryer DPA20 (2016) Drying capacity: from 0.5 to 25 kg/h. Process (air) airflow for DPA20: 5 ÷ 10 m³/h. Drying hopper volume for DPA20: 20 dm³ (20 litres). Temperature range: 40-150 °C. Dew point: standard down to -25 °C, with optional desiccant cartridge/tower down to -40 °C. Dwedpfexyi Dcsx Ab Tjf Compressed air supply: oil-free, filtered air, pressure ~ 5-7 bar. Control features: airflow managed in 7 increments/levels, material database of ~50 materials pre-loaded.

Condition: ready for operation (used), Year of construction: 2004, ARBURG Thermolift 100-2 – Dryer and Material Loader – 70 L – 6.2 kW – Made in Germany For sale: a reliable device for plastics processing – ARBURG Thermolift 100-2, fully operational and ready for immediate use. Manufactured in October 2004, industrial-grade build, German quality. ● Bin capacity: 70 L ● Year of manufacture: 10/2004 ● Supply voltage: 400 V / 3 phase / 50 Hz Djdpfevi H Stsx Ab Tswf ● Heating power: 4.5 kW ● Blower: 1.68 kW ● Total power requirement: 6.2 kW ● Weight: 200 kg ● Model: Thermolift 100-2 ● Serial number: 304380 Complete unit with electronic controls, mounted on transport casters. Excellent solution for use with injection moulding machines. Very good visual and technical condition.

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 05972978, input voltage: 380 V, total length: 10,560 mm, total width: 2,400 mm, total height: 1,250 mm, year of last overhaul: 2022, input current: 79 A, heating capacity: 47 kW (63.90 HP), temperature: 80 °C, type of cooling: air, plate width: 1,400 mm, infeed width: 1,500 mm, power: 47 kW (63.90 HP), Equipment: documentation/manual, Muller Dryer M-Jet International 1500 year of manufacture 1997 Fully operational 1500mm belt width up to max. 80 degrees Dsdpfx Aexz Rzfob Tswf With Viprotech stacker Optionally available in combination with various screen printing machines and accessories.

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Dodpfovvizkex Ab Tswf Storage location: Garbsen

Condition: used, Year of construction: 2019, operating hours: 413 h, functionality: fully functional, fuel type: electric, drive type: Elektro, Scrubber dryers Condition: Ready for use and fully functional Technical condition: good Dedoxz Iqwepfx Ab Tjwf Battery voltage: 24V

Condition: new, Year of construction: 2024, Effective delivery rate approx. 1050 l/min Maximum pressure 10 bar tank capacity 270 l Air outlet ½ " UNIT 1 Dimensions and weights Dedpfx Abefh Hahe Tewf Length approx. 1200 mm width/depth approx. 650 mm Height approx. 1540 mm Weight approx. 295 kg Electrical data Input power electric motor 7,5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound pressure level Lp 62 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Engine(s) Motor type Electric Location: From warehouse 54634 Bitburg - immediately available-

Condition: excellent (used), Year of construction: 2017, available immediately, 12-month warranty -Max. temperature 180°C -External dimensions WxDxH: 2520 x 1870 x 2300 mm -Usable chamber WxDxH: 1700 x 1350 x 1660 mm -Connection: 400V / 50Hz / 21kW -Weight: 1,100 kg -Documentation Dsdsxfvfkopfx Ab Tewf Not a paint dryer according to DIN EN 1539! Inspection at our warehouse by appointment. Oven, ovens, drying oven, kiln, heat oven, warming cabinet, industrial oven, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, recirculating drying cabinet, recirculating oven,

Year of construction: 2022, condition: excellent (used), Technical Specifications Process airflow approx. : 50 m³/h for DP604 (range for the series: 50–150 m³/h) Process air blower: 0.25 kW (DP604) Heating power (process heater): 2.5 / 3.5 kW Dwedjxxywqepfx Ab Tef Maximum process air temperature: up to 200 °C (HT version) Dew point (dry air): lower than –50 °C Weight: 235 kg Drying hopper capacity: 30–400 dm³, depending on configuration (1 or more hoppers)

Condition: used, WSA Lignomat vacuum dryer Control unit: Bollmann Tromatic 910GH Djdjxxpdtopfx Ab Tswf Depth approx. 10 m

Year of construction: 2022, operating hours: 2,113 h, condition: excellent (used), functionality: fully functional, Drum dryer Agromech M-829 with a chip-feeding stoker for the furnace. The drum dryer is equipped with a coal furnace adapted for burning wood waste or sawdust briquettes. The entire drying process, as well as the regulation and control of the drying air temperature, is semi-automatic and carried out by the dryer operator. Dwedpfexzup Tjx Ab Tsf THE DRYER IS BUILT FROM THE FOLLOWING MAIN COMPONENTS: * Coal furnace with thermal insulation, adapted for burning sawdust briquettes and wood waste * Wet sawdust feeder – chain-slat type, pit-installed, smoothly controlled by an electric inverter with a system for smooth dosing of the material to be dried * Insulated loading connector * Thermally insulated drying drum, length 9.00 m * Discharge chamber for dry material * Main dedusting cyclone with feeder * Main radial fan * Electrical control cabinet with temperature measurement and control instrumentation * Inclined screw conveyor for discharging dry material TECHNICAL CHARACTERISTICS: 1. Nominal capacity of the dryer at initial sawdust moisture 40–45% and final 15% – 1,000 kg/h 2. Amount of evaporated water – 1,100 kg/h 3. Maximum thermal power of the solid-fuel furnace – 1,000 kW 4. Maximum temperature of drying air at the drum inlet – 600–650°C 5. Average fuel consumption: * Hard coal or fuel with similar calorific value: 200 kg/h * High-calorific sawdust briquettes: 250–300 kg/h * Wood chips with moisture up to 35%: 250–350 kg/h 6. Total installed electrical power – 17 kW 7. Total weight of the dryer with refractory insulation – 16,500 kg The dryer was manufactured, assembled, and commissioned in November 2022. Operating hours: 2 113

Condition: good (used), Year of construction: 2016, Conveyor dryer for DTG : Fahrenheit Electric 6160 - Chiossi & Cavazzuti Hot air dryer in good condition, for all kind of digital/screen printing/transfer applications Year 2016 Delivery not included, we can ship everywhere, ask for a quote Djdpoxzq Tbofx Ab Tjwf Caractéristics : MAX POWER: 49 KW APPLICATION FIELD : DTG, screen printing, transfer printing DRYING by HOT AIR circulated (very high power) DRYING AREA: 6000 x 1600 mm PRODUCTION MAX : 600 pieces/h

Condition: excellent (used), Year of construction: 2020, Pneumatic Double Diaphragm Pump Cobra 40-10 Top condition – Year of manufacture: 2020 Its unique design enables low-pulsation operation. Consistent paint flow for a perfect spray pattern and highest surface quality. Ideally suited for processing shear-sensitive and moisture-sensitive materials. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for handling small material volumes and frequent color changes. Scope of delivery: Basic unit on frame, HD double hose 7.5 m, upper container 5 l Ex, AirCoat spray gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40. Technical Data: Ratio: 40:1 Displacement per double stroke: 10 cm³ Dwsdpfx Abexdtkuj Tjf Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Extremely low hours of use –

Condition: used, Used Comessa stainless steel 304 drum dryer/cooler. Drum Ø 2400 x 14000 mm length Drying length: 7000 mm Cooling length: 7000 mm Previous use: drying 30 TPH white sugar Stainless steel feed screw driven by 7.5 kW motor Stainless steel blowing fan 7.5 kW Stainless steel cooling fan 11 kW Stainless steel preheating, drying and cooling batteries Description of the original installation and manufacturer's technical documentation also available. Delivered without: Dwjdpfx Ajw Uig Ijb Tsf 45 kW shell drive motor/55 kW extraction fan/Steam preheating battery Weight: 21500kg Dimensions: diameter 3.35m x lenght 14m

Condition: excellent (used), Year of construction: 2010, Used adsorption dryer Kaeser DC75 Year of manufacture: 2010 16 bar Dodpfxexxiufo Ab Tewf 7.50 m³/min

Condition: as good as new (ex-display), Year of construction: 2025, The impressive advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and a pleasant working environment due to diagonallow-turbulence air-stroemung. Large detection window thanks to air guide plates – thus also suitable for larger factory troughs. Separation degree of paint mist up to 99%, return ability of the pre-filter up to 18 kg/m2 - thus great filter life! Easy and fast filter change on the front. Cost-cost replacement filters. Low acquisition costs and low energy requirements. Dry spray wall made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fiber filter as post-filter unit. Ex-fan incl. throttle valve attached to the left. Do not compromise on the quality of the surface. Suction-weighing Easy Paint are the ideal cost-effective application for the effective detection and filtering of the paint mist as well as the suction of the solvent dimempfe. Robust and powerful but economical in consumption. Thanks to the IPE double filtration system, two filter levels ensure a maximum separation degree of up to 99%. Thanks to the folded filter pockets, the cardboard labyrinth filter absorbs considerably more overspray (up to 18 kg/m2 filter area) than conventional filter mats. The downstream fiber glass fiber second-based filter absorbs only the finest residual particles. Dwjdpfxjdqc U Hj Ab Tjf As a guideline, the cardboard labyrinth

Condition: new, Year of construction: 2025, Paint mist extraction AL-KO colour Jet 1 Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Dsdpfobumr Ssx Ab Tjwf Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Adjustable side panels Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Nominal flow rate: 4600 m3/h Pressure: 500 PA Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Filter surface: 1 m2 Weight: 175 kg

Condition: new, Year of construction: 2024, Advantages -Compact design, space-saving Dodpebpg E Esfx Ab Tjwf -Powerful, high extraction capacity, low operating costs -Easy to maintain, long filter service life -Universally applicable, variable accessories -High flexibility -Mobile design -Suction technology with front plate system Technical data: Nominal motor power: 0,75 kW / 2,1 kW Motor speed: 960 / 1430 min Air volume: 6 800 m³ / h Filter surface: 2 m² ( 2 x 1 mtr.) Connection diameter 300 mm with throttle valve Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248kg

Condition: excellent (used), Year of construction: 2013, KAESER TB19 compressed air refrigeration dryer, with energy-saving SECOTEC control system. Year of manufacture: 2013 Technical specifications: Flow rate: 2.10 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to +43°C Dwjdpfx Abewmxb Te Tof Max. compressed air inlet temperature: +55°C Compressed air connection: G 1" Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 108 kg Power supply: 230 V / 1 / 50 Hz Location: from stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Type and specifications The distinctive advantages: Dwjdpfxjb R D U So Ab Tof Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working environment by diagonal low-turbulence airflow. Large capture window by air deflectors - suitable even for large workpieces. Separation of paint mist up to 99%, rear retaining capacity of the filter up to 18 kg / m ² - big filter booth time! Quick and easy filter change on the front page. Low-cost replacement filters. Low cost and extremely low energy consumption. Dry spraying wall of galvanized steel with welded base frame, cardboard labyrinth as a preliminary filter and glass fibre filter as a post filter unit. Grown ex fan incl. throttle links. Make no compromises in the quality of the surface. Suction walls easy paint are the ideal low-cost solution for the effective detection and filtering of paint mist, as well as extraction solvent vapours. Robust and powerful but economical in use. Standard suction power of easy paint 3500 model 600025 air performance on standard delivery * 3500 m ³/h filter surface primary 2,5 m² filtration area secondary 2.0 m ² power motor 400V/50 Hz * ex 1,1 kW Connection pipe suction pipe D 300 mm width in mm = 2750 overall height 1455 mm Depth in mm with capture window 855 weight in kg 145 Stando