Used Infeed System for sale (1,708)

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, working width: 300 mm, sheet thickness (max.): 150 mm, pass-through width: 300 mm, nominal power: 7.5 kW (10.20 HP), LÖWER SmartGrinder SG 300 K Wet Grinding Machine for Grinding or Deburring Metal - 1 contact roller unit with height adjustment via gear and handwheel - Workpiece thickness: 0.5 - 150 mm - Abrasive belt size: 300 x 3000 mm Itjdpfx Aoxbpt Hjfion - Additional conveyor belt: 300 x 3040 mm, profile spacing 240 mm - Additional conveyor belt: 300 x 3040 mm, profile spacing approx. 505 mm (6 sections) - Drive motor: 7.5 kW - Ammeter for performance display - Infinitely variable feed speed via conveyor belt: 2 - 9 m/min - Digital counter with zero reset (instead of absolute counter) - Upper tank with drain opening D = 120 mm - Two jet water nozzles, completely piped - Rubber-coated and grooved contact roller, 150 mm diameter - Contact roller hardness: 65° Shore - Additional HT grinding wheel, roller grit 120 - Infinitely variable abrasive belt speed: 7.5 - 22 m/s, adjustable via frequency converter and potentiometer for matching cutting speed during deburring or finishing - Grooved rolls for abrasive and conveyor belts - Height adjustment via handwheel, with digital display - Manual paper band filter with perforated sheet filter carrier above the settling tank. Includes holder, reel, and fleece roll. The filter fleece must be advanced manually. - Infeed guard with emergency stop - Additional rubber-coated pressure roller - Pneumatic belt tensioning - Rubber-coated spring-mounted pressure rollers, height and distance adjustable - Settling tank with matching pump - Dimensions (L x W x H): 1700 x 900 x 2400 mm - Weight: 685 kg - Operating voltage: 400 V, 50 Hz, 3-phase - Operating pressure: 6-8 bar - CE compliant Various VSM grinding fleece (100/180/240), approx. 3 pieces each at €153.00 each Various VSM zirconia alumina (80/120/240), approx. 15 pieces each at €16.35 each The machine has barely been used (only once in 2025!) and is in like-new condition! Absolutely WITHOUT defects Original price over €29,000 + VAT

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Itjdexmvaqspfx Afion Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: used, Year of construction: 2013, operating hours: 16,073 h, functionality: fully functional, machine/vehicle number: T/41521, year of last overhaul: 2025, OTT Tornado TOP + LIGMATECH EKOMAT ZHR 01/R/065 Return Device Year: 2013 The machine is equipped with: RMV-40 – Automatic edge band magazine, 0.4-3mm edge thickness, end trimming shears with roller and optical sensor for reducing edge length on the workpiece (saves edging material). Automatic edge feed hopper with optical detection for fixed-length edging pieces. Combi Melt – Gluing zone, supports EVA and PUR hot-melt adhesives, as well as all standard cleaning granulates. Machine Control: Operated via a 15-inch color touchscreen monitor, unlimited number of work programs can be sequentially saved, all preselection of processing aggregates as well as working parameters for the CombiMelt gluing system allow for full automation and maximum operator comfort. Electronic control – reference points with high accuracy +/- 1 mm. Via Beckhoff industrial PC, certain tool aggregates can be adjusted during machine operation/loading. Working Aggregates: -F- Pre-milling unit: For pre-milling workpieces before adhesive application. 2 HF motors, 1.5 kW, forward and reverse, automatic control. -Kc- Double end-trimming unit: With 2 high-frequency motors, 0.3 kW, 12,000 rpm. -Bfc– Rough milling cutter Heavy-duty cutter for milling solid edges from the surface and profiling before rounding radii. -Hft- Fine milling unit - Radius With 2 high-frequency motors, 0.3 kW, 12,000 rpm, double-sided, automatically adjustable. Iedpfx Aoxpphaofiotn -AKF- Automated copying milling unit as a universal milling aggregate: With two independent spindles for top and/or bottom longitudinal as well as corner processing. Automatically switches from beveling for thin edge up to 1 mm to radii processing. -ZKc- Scraper aggregate R2 Double-sided processing, automatic control, for removing rounded areas. FZK: Flat scraper for removing excess edge and glue residues. -GE- Second guide operation for workpiece leading (can be folded away or towards the machine as needed). -GS- Application of glide agent to the edge. -RS Set – 4-way chemical spraying and cleaning unit. -ZKc- Scraper aggregate R1. -WE: Angular stop – ensures precise infeed of the workpiece to the edgebander. Trouble-free machine in excellent condition, regularly serviced by OTT (Asamer s.r.o.) The machine is currently operating in production and can be tested - we are processing with PUR adhesive. Available for collection end of 2025.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Weinig Unimat 23 EL Four-Sided Planer (7 Heads) Year of Manufacture: 2005 Technical Condition: Very good Technical Specifications: - Working width: up to 230 mm - Working height: up to 140 mm - Number of spindles: 7 Isdpfxsv Nvr Nj Afietn - Spindle arrangement: - Bottom horizontal - Right vertical - Left vertical - Top horizontal - Bottom horizontal - Top horizontal - Bottom horizontal - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm - Feed speed: stepless adjustment, from 5 to 24 m/min - Infeed table length: 1,970 mm Spindle motor power: - Bottom horizontal: 5.5 kW - Right and left vertical: 7.5 kW - Top horizontal: 7.5 kW - Total installed power: 67 kW For an additional fee, installation, commissioning, and training on machine operation are available. We also offer ongoing maintenance services.

Condition: excellent (used), Weinig Powermat 500 5x Spindles (Without a 1st bottom spindle !!!! ) Width 20-250mm Height 10-140mm Memory system Itedpju Nt S Dsfx Afisn No 1. 7.5kW - Right 8000rpm No 2. 7.5kW - Left 8000rpm (Powerlock) No 3. 11kW - Top 8000rpm No 4 . 11kW - Top 8000rpm No 5 . 11kW - Bottom 8000rpm 5.5kw. Electronically variable feed. 36m/min 7x top feed rollers 3x bed rollers Memory system. Short infeed table. Automatic lubrication system. Manuals & hand tools.

Year of construction: 1990, condition: used, a used well preserved cold circular saw OMP Saw blade 425mm cutting range 90° 150mm Two cutting speeds 13/26m/min Iedpecmn Evjfx Afistn Feed speed infinitely variable Length stop with roller conveyor 3000mm infeed 2000mm Cooling device

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 230 V, warranty duration: 12 months, DGUV certified until: 11/2026, space requirement width: 800 mm, Slicer for small baked goods Schneid - Leo with infeed chute Tabletop device made of stainless steel Capacity up to approx. 2,000 rolls per hour Adjustable cutting height For slicing baked goods Max. product dimensions: 160 x 80 mm (W x H) Only from us: DGUV V3 safety tested Connection: 230V, ready to plug in Dimensions (W x D x H) in mm: 800 x 440 x 470 Brand new device, SAB certified 12 months warranty + spare parts service Optional: Mobile table for LEO Service package E-Box Itjdpfov N Tk Ajx Afion Maintenance contract Training & commissioning More top bakery equipment in stock!

Condition: good (used), Year of construction: 1999, machine/vehicle number: 6410/102/051, Offer 25325 Technical Data: - Cutting capacity at 90° - round: 320 mm Iedpfsxph E Rex Afiotn - flat: Width 500 x Height 300 mm - Mitre adjustment – right & left up to 60° - Cutting capacity at 45° – left & right: 320 mm - flat: 304 x 300 mm - Material support height approx. 750 mm - Saw blade dimensions: 5090 x 34 x 1.1 mm - Cutting speed infinitely adjustable: 17 to 90 m/min - Cutting pressure infinitely adjustable: 0 – 10 m/min - Total drive power: 400 V / 4.0 kW - Motorised chip removal brush - Hydraulic lifting/lowering of the saw frame - Hydraulically operated movable workpiece vice - Hydraulic mitre adjustment with digital angle display - Swarf conveyor - Motorised infeed roller conveyor KASTO, 10 m - Outfeed roller conveyor KASTO with length stop, 6 m - Required space approx.: W 1300 x H 1400 x D 3100 mm - Machine weight approx.: 1800 kg - Roller conveyor weight approx.: 3500 kg

Condition: used, Year of construction: 2004, operating hours: 25,000 h, functionality: fully functional, input voltage: 400 V, total length: 5,000 mm, total width: 1,200 mm, total height: 1,200 mm, input current: 30 A, conveyor belt width: 1,000 mm, power: 20.2 kW (27.46 HP), Used drying tunnel for heat fixation, suitable for applications such as screen printing, DTG, and DTF, year of manufacture 2004, with the following specifications: Belt width: 1000 mm, total length: 5000 mm, IR hood length: 2 x 2000 mm, infeed: 700 mm, outfeed: 300 mm, 400V, 50Hz, 20.2kW. The drying and curing tunnel is equipped with infrared ceramic emitters. The unit operates via a 32-amp connection. Iodpsxpgnkofx Afietn Condition is age-appropriate, with visible signs of use. However, the system runs smoothly and reliably. All functions are operational, and the unit was in use until recently. Inspection is possible at any time by appointment. Dismantling and transport of the drying tunnel must be organized by the buyer.

Condition: ready for operation (used), Drum crusher Bruks 820CL, vibrating conveyor Bruks chipper with rotor diameter 800 mm infeed opening 560 x 365 mm 2 knives chip length 23 - 27 mm productivity about 30 - 50 m3 chips/h power 55 kW length 30 m Itodpfx Afjxn T Tdeien weight ca. 4.500 kg

Condition: excellent (used), Year of construction: 2003, 460mm width stainless steel wire mesh belt 2070mm Drum width 6580x4700 Outer dimensions Ammonia 110kw Evaporator Enclosure and floor included including doors 120m usable belt 810mm infeed height Iedpfx Afexn S E Ejijtn 2280mm discharge height More photos and specs available on request

Condition: good (used), Year of construction: 1985, functionality: fully functional, ELB - SWN 5 VA II Surface Grinding Machine - Grinding area X/Y/Z: 525x375x255 mm - Magnetic chuck: 700x300 mm - Table clamping surface: 900x250 mm - Table longitudinal travel: 10-625 mm - Max. table load: 280 kg - Table feed: 1-30 m/min - Reciprocating grinding: 3-30 m/min - Distance, table to spindle center: 525 mm - Vertical feed speed: 2-180 mm/min Itedpfxexn Szyo Afion - Adjustable infeed: 0.001-2 mm - Grinding wheel speed: 3000 rpm - Coolant system - Machine feet - Documentation - COMPLETE TECHNICAL DATA SEE PHOTOS Dimensions: LxWxH 2.7x2.2x2 m / Weight 3500 kg Subject to errors and input mistakes.

Condition: used, Year of construction: 2018, functionality: fully functional, saw band length: 3,120 mm, saw band width: 27 mm, overall weight: 1,500 kg, power: 2.83 kW (3.85 HP), Capacity 90°: Ø280 mm./330 x 240 mm. Blade dimension: 3120 x 27 x 0,9 mm. Blade speed: 20-100 m./min. (Variable) Rollerway length: 4000 mm. Motor: 2,83 kW. Control: Mozart. Year: 2018 Country of origin: Italy. Size (L x W x H): 6000 x 2100 x 1900 mm. Weight: 1500 kg. With Mozart NC control, fast approach arm, ILC oil mist cooling unit, hydraulic bundle clamping, chip conveyor, motorized chip brush and 4000 mm. infeed roller track Itodexn Sr Ejpfx Afion All our machines are tested and serviced before delivery.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, The Mondini De/GS 200 type cheese spreader shown in the picture is for sale. Isdouwrr Sopfx Afiotn The machine applies grated cheese like a "waterfall" onto the conveyor belt passing underneath. The application width can be adjusted up to approx. 15 cm widths. Infeed conveyor, and conveyor not included.

Condition: ready for operation (used), Year of construction: 2002, Immediately available ex location: Kaltenbach saw–drilling unit Type KBS 750 DG plus APS 1050 Year of manufacture 2002 3-axis drilling station equipped with NENOK coolant channel drills Infeed roller conveyor 16 m Outfeed roller conveyor 12.5 m Central control renewed 2 years ago Price: EUR 49,000.—plus VAT ex location Iedpfjxn Rx Rox Afistn

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Edge banding machine Hebrock AKV3005DK-F with pre-milling, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Touchscreen interface with PLC control for simple operation of the machine; up to 12 user programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise reduction hood Extendable workpiece support, special feature extendable up to 950mm Extraction connection 80 + 140mm Units: Quick-change glue pot with glue outlet; two glue pots included in delivery (one used for EVA glue, one for PU glue), the PU glue pot is practically as new, only purchased for a single job. Pressure beam manually adjustable with SIKO counter Infeed fence manually adjustable with SIKO counter Edge thickness manually adjustable with SIKO counter Pre-milling unit with Leitz Whispercut diamond cutters, still sharp Gluing station with automatic edge feeder for coil material up to 3mm Itjdpstpn Etefx Afien Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge trimmings Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Corner rounder R2, pneumatically adjustable between thin and thick edge The profile milling unit can also be used for shelf program, that is, it only rounds the straight edge, not the corners Radius scraper blade R2, pneumatically retractable Glue joint scraper blade, pneumatically retractable Hood lock CE marking Operating manual A video of the machine in operation can be sent upon request. All reversible knives of the milling units and scraper blades have been renewed or rotated, saws sharpened. The machine is therefore ready for immediate use. Only the diamond pre-milling cutters (Whispercut) have not been replaced, but are still sharp. Paintwork touch-ups carried out. The Hebrock AKV series is the predecessor of the current K series. The machine has only about 730 operating hours (glue pot switched on), but the frequency converters were switched on for only about 455 operating hours. The machine is in very good condition, see original photos. Machine dimensions approx. 5000 x 1400 x 1550mm (LxWxH) Weight approx. 1550kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "further offers from this provider."

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Technical specifications: • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg • Cutting accuracy: +/- 2 mm • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) Ijdpfx Afoxn Rt Usiotn • STHIL RM404 cutting chain • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) • Safety system and SICK brand sensors Warranty: 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Condition: excellent (used), Catalogue number 7776 TECHNICAL DATA - shaft width: 520mm - 4-knife shaft - noise-dampening comb - shaft guard - table length: 3010mm - longer infeed table – electrically adjustable: 1770mm Itedpfx Afexl Umyjijn - cast iron tables - both tables adjustable - original cast iron fence, angle-adjustable - electric brake - extraction port diameter: 120mm - motor: 4kW - dimensions (L/W/H): 3010x1000x1400mm - weight: 870kg ADVANTAGES – Italian made – 4-knife shaft – upper control panel – electric brake – noise-dampening comb – longer infeed table – not repainted – used surface planer, very good condition, original DTR documentation, CE compliant Net price: 28,900 PLN Net price: 6,800 EUR based on rate of 4.25 EUR (Prices may vary with exchange rate fluctuations)

Condition: used, Year of construction: 2005, functionality: fully functional, saw band length: 3,180 mm, saw band width: 27 mm, cutting range round steel at 90°: 240 mm, overall weight: 1,150 kg, Capacity 90°: Ø240 mm./220 x 300 mm. Capacity 45° right: Ø200 mm./100 x 200 mm. Capacity 60° right: Ø120 mm./160 x 110 mm. Blade dimension: 3180 x 27 x 0,9 mm. Blade speed: 16-80 m./min. (Variable) Motor: 2,4 kW. Year: 2005 Country of origin: Italy. Size (L x W x H): 4500 x 1800 x 2100 mm. Weight: 1150 kg. With variable cutting speed, 500 mm. multiple feed stroke, digital readout of bow position, Unist oil mist cooling unit, motorized chip brush, pressure regulating of vices and 2000 mm. infeed roller track. Itodpfoxn Sk Usx Afien All our machines are tested and serviced before delivery.

Condition: excellent (used), Year of construction: 2024, operating hours: 650 h, Edge Banding Machine with PLC control system (incl. 15“ touch screen) and glue application to the workpiece for edge band material up to 3 mm: pre-milling (DIA-tools incl.) up to max. 3 mm milling depth, maintenance-free and coated quick heating pot with preliminary setup for change over quick heating pot (incl. hot-melt glue changing device), HF-trim saw station (approx. 12,000 rpm),HF-milling station (approx. 12,000 rpm) with pneum. milling adjustment, 2nd HF-milling station (approx. 12,000 rpm, incl. pneum. disengagement), corner rounding unit1), radius profile scraper, surface scraper (incl. pneum. disengagement), cleaning station, groove saw (incl. pneum. disengagement), robust chain drive, double roller top pressure (ball bearing supported), windows for aggregates from machine back side and operator side, indicating lamp for workpiece sequence, extensible support bar to the front, band feed approx. 15 m/min, gluing up to 60 mm workpiece thickness. Optional things installed on the machine Itsdpfoxn Nvbox Afien Quick change device for corner rounding Multi-Radiusscraper (R2/R1) Heatable infeed fence Wheels Release agent spraying unit (spraying workpiece) Cleaning agent spraying unit (spraying workpiece) Protection spraying edge Nesting Pneumatic 3-point adjustment Multiool for HF-milling station Airtronic (up tp 40 mm workpiece thickness) Axis package (motor driven adjustments of height, edge and premilling) Glue pot suction hood The machine is on stock!

Condition: used, Year of construction: 2004, functionality: fully functional, Well used Sunnen honing machine with Felsomat loading system. Diameter range (INSIDE Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when loaded with CGT tools TurboHone® tools: 3.81 to 32 mm when loaded with MMT tools Connecting rod tools: 53.8 to 63.8 mm when fitted with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Max. Workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 H/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar is recommended Temperature range: 0° to 35° C Floor space requirements: (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 x H 1829 Color: Pearl grey with pewter grey and burgundy decorative stripes Stand weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic set-up: spindle speed, stroke speed, stroke length, infeed value and sparking Automatic finishing: Standard Machine operating modes Automatic: Manual: Series production Individual production Itjdpfx Afsud Nm Roijn Clamping optional

Condition: excellent (used), Fully automated Loghouse milling machine Blockhausfräse BL100ADT for economic production of components used in modern log cabin construction up to maximum dimension 140 x 200mm. Due to the efficient production method with automatic Optimization and multiple lengths (Multilog System) the output from this machine is very high. During each working shift can be produced up to 1200 metres of components for average sized, individual houses. High performance spindle drives and climb milling ensures a clean cut milling contour without being frayed. Isdpfx Afexn Irheistn  Belt conveyer loading system, where the operator puts onto the raw material.  Infeed table with Servo pushing system for fully automated workpiece transport and positioning.  Blockhausfräse BL100 with the working units, drill, wind notch, main notch, log dovetail / straight connection groove head, crosscut saw.  Outfeed table with the pneumatic unloading device.  Workpiece deposit support, where the operator takes off the finished Logs.  Operator panel with IPC for software and machine control.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working range: 3,050 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 220 mm, positioning accuracy: 0.015 mm, input voltage: 400 V, table length: 3,050 mm, operating speed: 250 mm/s, table width: 1,525 mm, pressure: 4,137 bar, positioning speed: 15 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, table height: 840 mm, operating pressure: 4,137 bar, input current: 77 A, total height: 1,300 mm, total length: 4,210 mm, total width: 2,130 mm, water pressure: 2.8 bar, pump pressure: 4,137 bar, overall weight: 3,850 kg, working length: 3,050 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, 2017 Swiftcut Swift-Jet CNC Waterjet Cutting Machine – Under 900 Hours Use High-Precision CNC Waterjet Profile Cutter – Low Hours, Excellent Condition – Now Available at Used Machine Tools Ireland Ltd 🔍 Overview: We are offering this 2017 Swiftcut Swift-Jet Waterjet Cutting Machine, a top-tier solution for high-precision, cold-cutting of a wide range of materials including metal, stone, plastic, glass, and composites. With less than 900 operational hours, this machine is in superb condition and ideal for any business seeking reliable, accurate, and versatile cutting performance. 🛠️ Machine Specifications: Brand: Swiftcut Itedpowb D S Hefx Afijn Model: Swift-Jet Year of Manufacture: 2017 Technology: CNC Waterjet Profile Cutting Cutting Area: [Insert size, e.g. 1250mm x 2500mm if known] Hours Used: Less than 900 hours Pump Type: High-pressure waterjet pump Cutting Method: Abrasive and pure water capability Software: Swiftcut Control Software (user-friendly, intuitive interface) Table Dimensions: 3000 x 1500mm Max Sheet Size: 3050 x 1525mm (10' x 5') Max Traverse Speed: 15m.min Max Z Axis Clearance: 220mm Positional Accuracy: 0.015mm Tank Depth: 840mm Max Pressure: 60,000psi(4137bar) Continuous Pressure: 60,000psi Min. Piercing Pressure: 20,000psi Max Output Flow: 3.8l/min Max Orifice Size: 0.36mm Min Orifice Size: 0.13mm Cutting Water Infeed: 7.6l/min Water Pressure Infeed: 2.8bar Pump Voltage: 400V/77A Pump Power: 37kW/50HP Machine Voltage: 1ph/16A Water Treatment Voltage: 1ph/10A Garnet Hopper Voltage: 1ph/10A Machine Dimensions: 4210 x 2130 x 1740mm Pump Dimensions: 1850 x 920 x 1300mm Machine Weight: 2400kg(empty) Pump Weight: 1450kg 🌟 Key Features: Cold-cutting process – no heat-affected zones, preserving material integrity Precise and clean cuts on a variety of materials and thicknesses Ideal for metal fabrication, signage, engineering, prototyping, and more Compact footprint, easy installation, and low maintenance Exceptional build quality from a trusted UK manufacturer 🔧 Applications: Perfect for cutting: Mild Steel, Stainless Steel, Aluminium Brass, Copper Stone, Granite, Marble Plastic, Acrylic Glass, Rubber, Composite Materials ✅ Why Choose This Swift-Jet? Very low hours – lightly used and well maintained Excellent condition – ready to work immediately Cost-effective alternative to brand new equipment Supported by Swiftcut's strong reputation for service and performance Take advantage of this rare opportunity to own a high-spec waterjet cutting system with low hours – ideal for precision fabrication. Act quickly – this unit won’t last long! Explore Other Waterjet Options Here: Used Waterjet Cutting Machines Used waterjet cutting machine Ireland, Swiftcut Swift-Jet for sale, CNC waterjet profile cutter, low hours waterjet machine, 2017 Swift-Jet waterjet, metal and stone cutting machine, abrasive waterjet cutter, used CNC cutting machines Ireland, high-precision waterjet cutter, used fabrication equipment for sale

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA - max. blade diameter: 500 mm - spindle diameter: 30 mm - hydraulic blade stroke - max. cutting width: 500 mm - max. cutting height (in the center, with 500 mm blade): 160 mm - main motor: 4 kW - table dimensions: 715x1070 mm - table height from base: 790 mm - roller tables: 2 pcs - table dimensions: Iodpfswtqbfjx Afiotn - infeed (L/W): 2000x640 mm - outfeed (L/W): 2000x640 mm - machine dimensions (L/W/H): 1400x940x1070 mm - total weight: 480 kg ADVANTAGES – 2 roller tables – hydraulic blade stroke – used saw, in very good condition Net price: 15,900 PLN Net price: 3,740 EUR at 4.25 EUR exchange rate (Prices may change with exchange rate fluctuations)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit Itedpfexn Hzbox Afisn With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard